LawGrids logoLAWGRIDS.ORG

Form 17, The Tamil Nadu Factories Rules,1950: FormNo.17

The Tamil Nadu Factories Rules,1950 - Form 17

Text of form 17

FormNo.17.

FormNo.17. (2) A Health Register in Form No. 17 containing the names of all persons employed in the operations specified in clause 1 shall be kept. (3) No person after suspension shall be employed unless the Certifying Surgeon after re-examination, again certifies him to be fit for employment. Explanation. - 'Suspension' means suspension from employment in any of the operations specified in clause 1 by written certificate in the Health Register signed by the Certifying Surgeon who shall have power to suspend any person employed in any such operation. 9. Dermatitis. -- (i) The occupier shall make arrangements to give suitable jobs to workers affected by chronic dermatitis ; (ii) The occupier shall notify to the Certifying Surgeon all cases of dermatitis. 10. Exemptions. -- The Chief Inspector may grant exemption from the operation of clauses 3, 4, 5, 6 and 7 to the extent he deems suitable where he is satisfied that their observance is not necessary for safeguard­ ing the health of the operatives. SCHEDULE XV Pottery 1. Definitions. -- For the purposes of this schedule -- (a) 'pottery' includes earthenware, stoneware, porcelain, china tiles and any other articles made from clay or from a mixture containing clay, any other materials such as quartz, flint, feldspar and gypsum. (b) 'efficient exhaust draught' means localised ventilation af­ fected by mechanical or other means, for the removal of dust or fume so as to prevent it from escaping into the air or any place in which work is carried on. No draught shall be deemed efficient which fails to remove, effectively dust or fume generated at the point where dust or fume originates ; (c) 'fettling' includes scalloping, towing, sand papering, sand sticking, brushing or any other process of cleaning of pottery-ware in which dust is given off ; (d) 'leadless glaze' mean a glaze which does not contain more than one per cent. of its dry weight of a lead compound calculated as lead monoxide; (e) 'low solubility glaze' means a glaze which does not yield to dilute hydrochloric acid more than five per cent. of its dry weight of a TAMIL NADU FACTORIES RULES, 1950 [R.95 R.95] TAMIL NADU FACTORIES RULES, 1950 soluble lead compound calculated as lead monoxide when determined in the manner described below : -- A weighed quantity of the material which has been dried at 100°C and thoroughly mixed shall be continuously shaken for one hour at the common temperature with 1,000 times its weight of an aqueous solution of hydrochloric acid containing 0.25 per cent. by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear filterate shall then be precipitated as lead sulphide and weighed as lead sulphate ; (f) 'ground or powdered flint or quartz' does not include natural sands; (g) 'potter's shop' includes all places where pottery is firmed by pressing or by any other process and all places where shaping, fettling or other treatment of pottery articles prior to placing for the biscuit fire is carried on. 2. Efficient exhaust draught. ·- The following processes shall not be carried on without the use of an efficient exhaust draught : -- (i) All processes involving the manipulation or use of a dry and unfritted lead compound ; (ii) The fettling operations of any kind, whether on greenware or biscuit, provided that this shall not apply to the wet fettling, and to the occasional finishing of pottery articles without the aid of mechanical power; (iii) The sifting of clay dust or any other material for making tiles or other articles by pressure, except where -- (a) this is done in a machine so enclosed as to effectively prevent the escape of dust ; or (b) the material to be sifted is so damp that no dust can be given off; (iv) The pressing of tiles from clay dust, an exhaust opening being connectedwith each press; this clause shall also apply to the pressing from 'Clay dust of articles other than tiles, unless the material is so damp that no dust is given off ; TAMILNADUFACTORIESRULES, 1950 [R.95 (v) (a) The fettling of tiles made from clay dust, by pressure, except where the fettling is done wholly on, or with, damp material ; (b) The fettling of other articles made from clay dust, unless the material is so damp that no dust is given off; (vi) The process of loading and unloading of saggars, where handling and manipulation of ground and powdered flint, quartz, alumina or other materials are involved ; (vii) The brushing of earthenware biscuit, unless the process is carried on in a room provided with efficient general mechanical ventila­ tion or other ventilation which is certified by the Inspector of Factories as adequate, having regard to all the circumstances of the case ; (viii) Fettling of biscuitware which has been fired in powdered flint or quartz except where this is done in machines so enclosed as to effectively prevent the escape of dust ; (ix) Ware cleaning after the application of glaze by dipping 'or other process ; I (x) Crushing and dry grinding of materials for pottery bodies and saggars, unless carried on in machines so enclosed as to effectively prevent the escape of dust or is so damp that no dust can be given off; (xi) Sieving or manipulation of powdered flint, quartz, clay grog or mixture of these materials unless it is so damp that no dust can be given off; (xii) Grinding of tiles on a power- driven wheel unless an efficient water spray is used on the wheel ; (xiii) Lifting and conveying of materials by elevators and con­ veyors unless they are effectively enclosed and so arranged as to prevent escape of dust into the air in or near any place in which persons are employed; (xiv) The preparation or weighing out of flow material, lawning of dry colours, colour dusting and colour blowing ; (xv) Mould making, unless the bins or similar receptacles are used for holding plaster of paris and provided with suitable covers ; (xvi) The manipulation of calcined materials unless the material has been made and remain so wet that no dust is given off. 3. Certain processes to be carried on so as to secure effective separation from one another. •• Each of the following processes shall be carried on in such a manner and under such conditions so as to secure effectual separation from one another, and from wet processes : -- (a) Crushing and by grinding or sieving of materials, fettling, pressing of tiles, drying clay and greenware, loading and unloading of saggars ; and - (b) all processes involving the use of a dry lead compound, 4. Restrlction on the use of glaze.» No glaze which is not a leadless glaze or a low solubility glaze shall be used in a factory in which pottery is manufactured. 5. Prohibition of the employment of women and young persons. •• No woman or young person shall be employed or permitted to work in any of the operations specified in paragraph 2, or at any place where such operation is carried on. 6. Potter's wheel. •• The potter's wheel (Jolly and Jiggar) shall be provided with screens or so constructed as to prevent clay scrapings being thrown off beyond the wheel. 7. Prevention of dust,» (1) All practical measures shall be taken by damping or otherwise to prevent dust arising during cleaning of floors. (2) Damp saw dust or other suitable materials shall be used to render the moist method effective in preventing dust rising into the air , during the cleaning process which shall be carried out after work has ceased. 8. Floors. •• The floors of potters' shops, slip houses, dipping houses and ware cleaning rooms shall be hard, smooth and impervious and shall be thoroughly cleaned daily by a moist method by an adult male. R.95] TAMILNADUFA<;rORIESRULES, 1950 . � '1[9. Medical facilities and records of examinations and tests • •• (1) The occupier of every factory in which manufacture of pottery is carried on, shall-- ( a) employ a qualified medical practitioner for medical surveil­ lance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories ; and (b) Provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a). ' (2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in-a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector. 10. Medical Examination by Certifying Surgeon,» (1) Every worker employed in any process mentioned under paragraph 2, shall be ex- 3!!llJled by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for lead in urine and blood, ALA in urine, haemoglobin content, stippling of cells and pulmonary function test and chest X-ray fpi; workers engaged in processes mentioned in clauses (i) and (xiv) of paragraph2 and pulmonary function tests and chest X-rays for the others. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon. (2) All persons employed in any of the processes included under sub-paragraph 2 (i) and (xiv) shall be examined by a Certifying Surgeon once in every three calendar months. Those employed in any other processes mentioned in the remaining sub-paragraphs of paragraph 2 shall be examined by a Certifying Surgeon once in every twelve calendar months. Such examinations in respect of all the workers shall include all the tests as specified in sub-paragraph (1) except chest X-ray which will be once in three years. (3) The Certifying Surgeon, after examining a worker, shall issue certificate of fitness in Form 27. The record of examination and re­ examinations carried out shall be entered in the Certificate and the Certificate shall be kept in the custody of the Manager of t�e Factory. 1 Subs. vide G.O. Ms. No. 2223, L & E, dated the 6th October, 1988. TAMILNADU FACTORIES RUI.ES, 1950 [R.95 The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a Health Register in Form_17. ( 4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector. (5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include thy period for which he considers that the said person is unfit forworkin the said processes. The person so suspended from the process, shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated. (6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examina­ tion, again certifies him fit for employment in those processes.] 11. Protective equipment. -- (1) The occupier shall provide and maintain-suitable overalls and head coverings for all persons employed in any process specified in paragraph 2. (2) The occupier shall provide and maintain suitable aprons of wacer-proof or similar material, which can be sponged daily for the use of the dippers, dippers' assistants, throwers,jollyworkers, casters, mould makers and filter press and pug mill workers. (3) Aprons provided in pursuance of sub- paragraph (2) shall be thoroughly cleaned daily by the wearers by sponging or other wet process. All overalls and head coverings shall be washed, cleaned and mended atleast once a week and the occupier shall provide facilities for such washing, cleaning and mending. ( 4) No person shall be allowed to work in emptying sacks of dusty materials, weighing out and mixing of dusty materials and charging of ball mill� and blungers without wearing a suitable and effi�ent dust respirator. - , R.95] TAMIL NADU FACTORIES RULES, 1950 TAMIL NADU FACTORIES RULES, 1950 [R.95 ,, 12. Washing facilities. -- The occupier shall provide and maintain, in a cleanly state and in good repair for the use of all persons employed in any of the processes specified in paragraph 2 a wash place under cover with-- (a) either a trough with smooth impervious surface fitted with a waste pipe, without plug, and of sufficient 'length to allow atleast 60 centimetres for every five such persons employed at any one time, and having a constant supply of clean water from taps or jets above the trough at intervals of not more than 60 centimetre ; or atleast one tap or stand pipe for every five such persons employed at any one time, and having a constant supply of clean water, the tap or stand pipe being spaced not less than 1.22 metres apart ; and (b) a sufficient supply of clean towels made of suitable materials changed daily, with sufficient supply of nail brushes and soap. 13. Time allowed for washing. -- Before each meal and before the end of the day's work at least ten minutes, in addition to the regular meal times, shall be allowed for washing to each person employed in any of the processes specified in paragraph 2. 14. Mess-room. -- (1) There shall be provided and maintained for .use of all persons remaining within the premises during the rest intervals, a suitable and an adequate mess room providing accommodation at the rate of 0.93 square metres per head and furnished with the following, namely: -- (.i) a sufficient number of tables and chairs or benches with back rests ; · (ii) arrangements for washing utensils ; (iii) adequate means for warming food ; and (iv) adequate quantity of drinking water. (2) The room shall be adequately ventilated by the circulation of fresh air and placed under the charge of a responsible person and shall be kept clean. R.95] TAMILNADU FACTORIES RULES, 1950 15. Food drinks, etc., prohibited in work- rooms. -- No food, drink,' pan and supari or tobacco shall be brought into, or consumed by any worker in any work-room in which any process specified in paragraph 2 is carried on and no person· shall remain in any such room during intervals for meals or rest. 16. Cloaleroom, etc. •• There shall be provided and maintained for the use of all persons employed in any process specified in paragraph 2 -- (a) a cloak-room for clothing put off during working hours and such accommodation shall be separate from any mess room ; and (b) separate and suitable arrangements for the storage of protec­ tive equipment provided under paragraph 11. 17. Savings.·· Nothing contained in this Schedule shall apply to a , factory in which any of the following articles, but no other article of pottery are made : -- (a) unglazed or salt glazed bricks and tiles; and (b) architectural terra-cotta made from plastic clay and either rnglazed or glazed with leadless glaze only. 18. Exemption. •• If the Chief Inspector of Factories is satisfied in respect of any factory that the applicatio,,n of all or any of the provisions of this Schedule to that factory, is not necessary for the protection of the persons employed in such factory, he may, by order in writing, exempt such factory, from all or any of those provisions, subject to such conditions as he may specify therein. The Chief Inspector may at any time in his discretion revoke such order without assigning any reason. 1 [SCHEDULE XVI CHEMICAL WORKS PART I 1. Application. -- _This schedule shall apply to all manufacture and processes incidental thereto carried on in chemical works. ' . 1 Subs. by G.O. Ms. No. 518, Labour and Employment, dated the 15th April, 1989. TAMIL NADU FA<wORIES RULES, 1950 [R.95 2. Definition. -- For the purpose of this Schedule -- ( a) "chemical works " means any factory or such parts of any factory as are listed in Appendix 'A ' to this schedule ; (b) "efficient exhaust draught" means localised ventilation ef­ fected bymechanical or other means for the removal of gas, vapour, fume or.!3\Jst to prevent it from escaping into the air of any place in which work is carried on ; - ( c) "bleaching powder" means the bleaching powder commonly called chloride of lime ; (d) "chlorate" means chlorate or perchlorate; ( e) "caustic" means hydroxide of potassium or sodium ; (!) "chrome process" means the manufacture of chromate or bi­ chromate of potassium or sodium, or the manipulation, movement or other treatment of these substances ; (g) " nitro or amino process" means the manufacture of nitro or amino derivatives of phenol and of benzene or its homologues and the making of explosives with the use of any of these substances ; (h) the term 'permit to work' system means the compliance with the procedures laid down under paragraph 20 of Part II ; (i) "toxic substances" means all those substances which when they enter into the human body, through inhalation or ingestion or absorption through skin in sufficient quantities cause fatality or exert serious afflic­ tion of health or chronic harmful effects on the health of persons exposed to it due to its inherent chemical or biological effects in respect of substances whose TL V is specified in Rule 102-A, exceeding the concen­ tration specified therein would make the substance toxic ; (j) "emergency" means a situation or condition leading to a circumstance or set of circumstances in which there is dan�er to the life or health of persons or which could result in bis fire or explosion or J?Ollution to the work and outside environment, affecting the workers or neighbour­ hood in a serious manner, demanding immediate action; (k) "dangerous chemical reactions" means high speed reactions, run-away reactions, delayed reactions, etc., and are characterised by evo­ lution of large quantities of heat, intense release of toxic or flammable gases or vapours, sudden pressure build-up, etc. ; (l) "manipulation" means mixing, blending, filling, emptying, grinding, sieving, drying, packing, sweeping, handling, using, etc. ; (m) "approved personal protective equipment" means items of personal protective equipment conforming to the relevant ISi approved by the Chief Inspector of Factories ; (n) "appropriate p_ersonal protective equipment" means t�at wh�n the protective equipment is used by the worker, he shall have no risk to his life or health or body ; and ( O) "confined space" means any srace by reason .of its co�struc­ tion as well as in relation to the nature o the work earned therein and where hazards to the persons entering into or working inside exist or are likely to develop during working. PART II GENERAL REQUIREMENTS Applying to all the works in Appendix 'A'. 1. House keeping. -- (1) Any spillage of materials shall be cleaned up before further processing. (2) Floors, platforms, stairways, passages and gangways shall be kept free of any obstructions. (3) There shall be provided easy means of access to all parts of the plant to facilitate cleaning. 2. Improper use of chemicals> No chemicals or solvents or empty con­ tainers containing chemicals or solvents shall be permitted to be used by workers for any purposes other than in the processes for which they are supplied. 3. Pll.'obibitim:n on the use of'food, ete,« No food, drink, tobacco, pan or any edible item shall be stored or heated or consumed on or near any part of the plant or equipment. 4. Cautionary notices and instructions. -- (1) Cautionary notices in a language understood by the majority of workers shall be prominently displayed in all hazardous areas drawing the attention of all workers about the hazards to health, hazards involving fire and explosion and any other hazard such as consequences of testing of material or substances used in the process or using any contaminated container for drinking or eating, to which the workers' attention should be drawn for ensuring their safety and health. (2) In addition to the above-cautionary notice, arrangement shall be made to instruct and educate all the workers including illiterate workers about the hazards in the process including the specific hazards to which they may be exposed to, in the normal course of their work. Such instructions and education should also deal with the hazards involved in unauthorised and unsafe practices including the properties of substances R.95] TAMIL NADU FACTORIES RULES, 1950 specifications or in the absence of it, personal protective equipment TAMIL NADtJ FACTORIES RULES, 1950 [R.95 used in the process under normal conditions as well as abnormal condi­ tions and the precautions to be observed against each and every hazard. Further, an undertaking from the workers shall be obtained within one month of their employment and {or old workers employed, within one month of coming into operation of the rules, to the effect that they have read the contents of the cautionary notices and instructions, understood them and would abide by them. The training and instructions to all workers and all supervisory personnel shall include the significance of different types of symbols and colours used on the labels struck or painted on the various types of containers and pipelines. s: Evaluation and provisions of safeguards before the eommence­ mentotr_process. -- (1) Before commencing any process or any experimen­ tal work, or any new manufacture covered under ApJ?endix 'A', the occupier shall take all possible steps to ascertain definitely all the hazards involved both from the actual operations and the chemical reactions including the dangerous chemical reactions. The properties of the raw materials used, the final products to be made, and any by-prp_ducts derived during manufacture, shall be carefully studied and provisions shall be made for dealing with any hazards including effects on workers, which may occur during manufacture. (2) Information in writing giving details of the process, its hazards and the steps taken or proposed to be taken from the design stage to disposal stage for ensuring the safety as in sub-paragraph (1) above.should be sent to the Chief Inspector at the earliest but in no case l�ss than 15 days before commencing manufacture, handling, or storage of any .of items covered under Appendix 'A' whether on experimental b'asis, or as pilot plant or as trial production, or as large-scale manufacture. (3) The design, construction, installation, operation, maintenance and disposal of the buildings, plant and facilities shall takednto considera­ tion effective safeguards against all the safety and health hazards so evaluated, (4) The requirements under the sub-paragraphs (1) to (3) shall not act in lieu of or m derogation to, any other provisions <!ontained in an} Act governing the work. 6. Authorised entry. -- Authorised persons only shall be perniitted tc enter any section of the factory or plant where any dangerous operations or processes are being carried on or where dangerous chemical reactions are taking place or where hazardous chemicals are stored. 7. Examination of instruments and safety devices. - (1) All instru ments and safety devices used in the process shall be tested' before takin1 into use and after carrying out any repair to them and examined once ii a month, by a competent person. Records of such tests and examination shall be maintained in a register." . · R. 95] TAMIL NADU FACTORIES RULES, 1950 (2) All instruments and safety devices used in the process shall be operated daily or as often as it is necessary, to ensure its effective and efficient working at all times. 8. JElectrical installations. •• All electrical installations used in the process covered in Appendix 'A' shall be of an appropriate type to ensure safety against the hazard prevalent in that area such as suitability against dust, dampness, corrosion, flammability and explosion, etc., and shall conform to the relevant ISi specifications governing their construction and use for that area. 9. Handling and storage or chemicals. •• (1) The containers for handling and storage of chemicals shall be of adequate strength taking into consideration the hazardous nature of the contents. They shall also be provided with adequate labelling and colour coding arrangements to enable identification of the containers and their contents indicating the hazards and safe handling methods and shall conform to the respective ISi standards. The instructions given in the label shall be strictly adhered to. Damaged containers shall be handled only under supervision of a knowl­ edgeable and responsible person and spillage shall be rendered innocu­ ous in a safe manner using appropriate means. (2) The arran�ements for the storage of chemicals including charging of chemicals in reaction vessels and containers shall be such as to prevent any risk of fire or explosion or formation of toxic concentration of substances above the limits specified in Rule 102-A. (3) Without prejudice to the generality of the requirements in sub­ paragraph (2) above, the arrangements shall have suitable ventilation facilities and shall enable the maintenance of safe levels in vessels and containers. Such arrangements shall also take into consideration, the type offlooring and thecapacityofflooring and the compatibility requirements of substances with other chemicals stored nearby. ( 4) ( a) Storage of chemicals and intermediate products, which are highly unstable or reactive or explosive shall be limited to the quantities required for two months use. (b) Whenever the quantities laid down in the above clause ( a) are to be exceeded, the permission of the Chief Inspector shall be obtained. (c) Notwithstanding anything contained in clauses (a) and (b) above, the Chieflnspector of Factories may direct any factory carrying out processes covered in Appendix 'A' to further limit the stora�e of hazard­ ous substances to quantities less than two months on considerations of safety. (5) Standby arrangements equal to the biggest container shall always be available to transfer the toxic substances quickly into the standby storage facility if �feet develops in any of the containers resulting in the release of toxic substances. TAMIL NADU FACTORIES RULES, 1950 [R. 95 (6) Any storage facility constructed using non-metallic material : : such as Fibreglass Reinforced Plastics (FRP), all glass vessels, etc., shall have adequate strength to withstand the stress, if any, exerted by the contents and shall be properly anchored. Working platforms, access ladders, pipe lines, etc., used in such storage facility shall not have any support on the structure of the storage facility and shall be independently supported. 10. Facility for isolation. •• The plant and equipment shall be so · constructed and maintained as to enable quick isolation of plant or part of plant or eguipment, with appropriate indication. One COJ?Y of the layout plan indicatmg the isolation facilities shall always be available with the security personnel, the maintenance and the Health and Safety personnel and these isolation facilities shall be checked for its effectiveness once in a month. 11. Personal protective equipment. •• (1) All workers exposed to the hazards in the processes covered by this schedule shall be provided with appropriate and approved type of personal protective equipment. Such equipment shall be in a clean, sterile and hygienic condition before issue. (2) The occupier shall arrange to inform, educate and supervise all the workers in the use of personal protective equipment while carrying out the job. (3) As regards any doubt regarding the appropriateness of any personal protective equipment, the decision of the Chieflnspector will be final. 12. Alarm systems. -- (1} Suitable alarm and effective alarm systems giving audiable and visible indications, shall be installed at the control room as well as in all strategic locations where process control arrange­ ments are available so as to enable corrective action to be taken before the operational parameters exceed the predetermined safe levels or lead to conditions conducive for an outbreak of fire or explosion to occur. Such alarm systems shall be checked daily and tested every month at least once · to ensure its performance efficiency at all times. (2) The Chief Inspector of Factories may direct such systems to be installed in case of plants or processes where toxic materials are being used and spillage or leakage of which may cause widespread poisoning in or around the plant. 13. Control. of escape of substances into the work atmospherev-- (1) Effective arrangements such as enclosure, or by-pass or efficient exhaust draught, maintenance of negative pressure, etc., shall be provided in all plants, containers, vessels, sewers, drains, flues, ducts, culverts and buried pipes and equipments, to control the escape and spread of substances which are likely to give rise to fire or explosion or toxic hazards during normal working and in the event of accident or emergency. R.95] (2) In the event of the failure of the arrangements �or control resulting m the escape of substances m the work ab;losphere immediate steps shall be taken to control the process in such a manner, that further escape is brought down to the safe level. (3) The substances that would have escaped into the work atmos­ phere before taking immediate steps as required in sub-paragraph (2), shall be rendered innocuous by diluting with air or water or any other suitable agent or by suitably treating the substances. Jl.4. Control of dangerous chemical reactions. •• Suitable provisions, such as automatic and or remote control arrangements, shall be made for controlling the effects of "dangerous chemical reactions". In the event of failure of control arrangements automatic flooding or blanketing or other effective arrangements shall come into operation. 15. 'll'esting, examination and repair of plant and equipment. •• ( 1) All parts of plant, equipment and machinery used in the process which in the likely event of their failure may give rise to an emergent situation shall be tested by a competent person before commencing process and retested at an interval of two years or after carrying out repairs to it. The competent person shall identify the parts of the plant, equipment and machinery required to be tested as aforesaid and evolve a suitable testing procedures. In carrying out the test as mentioned above in respect of pressure vessels or reaction vessels the following precautions shall be observed, namely: -- (a) before the test is carried out, each vessel shall be thor­ oughly cleaned and examined externally, and as far as practicable, internally also for surface defects, corrosion and foreign matter. During the process of cleaning and removal of sludge, if any, all due precautions shall be taken against fire or explosion, if such sludge is of phyropheric nature or contains spontaneously combustible chemicals ; (b) as soon as the test is completed, the vessel shall be thoroughly dried internally and shall be clearly stamped with the marks and figures indicating the person by whom testing has been done and the date of test ; and ( c) anyvessel which fails to pass the test or which for any other reason is found to be unsafe for use shall be destroyed or rendered unusable under intimation to the Chief Inspector. (2) All parts of plant, equipment, machinery which in the likely event of failure may give rise to an emergent situation shall be examined once in a month by the competent person. (3) Records of testing and examination referred to in paragraphs (1) and (2) shall be maintained as long as that part of the plant, equipment and machinery are in use. TAMIL NADU FACTORIES RULES, 1950 ' TAMILNADU FACTORIES RULES, 1950 [R. 95 ' - · ( 4) All repair work including alteration, modification and addition to be carried out to the plant, equipment and machinery shall be done under the supervision of a responsible person who shall evolve a proce­ dure to ensure safety and health of persons doing the work. When repairs or modification is done on pipelines and joints are required to be welded, but welding of joints shall be preferred. Wherever necessary, the responsible person shall regulate the aforesaid work through a 'permit to .vork system'. 16. Staging. -- (1) All staging that is erected for the purpose of naintenance work or repair work or for work connected with entry into xmfined spaces and used in the processes included in Ap_pendix 'A' shall Je stable, rigid and constructed out of substantial material of adequate itrength, Such staging shall conform to the respective Indian Standard ;;pecifications. (2) Staging shall not be erected over any closed or open vessel mless the vessel is so constructed and ventilated to prevent exposure of persons working on the stages. (3) All the staging constructed for the purpose of this I?aragraph shall have appropriate access which are safe and shall be fitted with proper hand rails to a height of one metre and toe board. 17. Seating arrangements. •• The seating arrangements provided for the operating personnel working in processes covered in Appendix 'A' shall be located in a safe manner as to prevent the risk of exposure to toxic, flammable and explosive substances evolved in the work environment in the course of manufacture or repair or maintenance, either due to failure of plant and equipment or due to the substances which are under pressure, escaping into the atmosphere. 18. JEntry into or work in confined space. -- (1) The occupier of every factory to which the provision of this schedule apply, shall ensure the observance of the following precautions before permitting any person to enter or work inside the confined spaces : -- (a) identify all confined spaces and the nature of hazards that are encountered in such spaces, normally or abnormally and arrange to develop the most appropriate safeguards for ensuring the safety and health of persons entering into or working inside, the confined spaces ; t b) regulate the entry or work inside . the confined spaces through a ' ermit to work system' which should include the safeguards so developed s required under sub-clause ( a) above ; J ( c) before testing the confined space for entry into or work, the place shall be rendered safe by washing or cleaning with neutralizing agents; or purging with steam or inert gases and making adequate forced ventilation arrangements or such measure which will render the confined space safe; R.95] ( d) shall arrange to carry out such tests as are necessary for the purpose by a competent person and ensure that the confined space is safe for the persons to �nter or work. Such testing shall be carrie? out as often as is necessary during the course of work to ensure its continued safety ; ( e) shall arrange to educate and train the personnel who would be required to work in confined spaces about the hazards involved in the work. He shall also keep in readiness the appropriate and approved personal protective equipment including arrangements for rescue, resur­ rection and first aid, and shall arrange supervision of the work at all times by a responsible and knowledgeable person. (2) The Manager shall maintain a log of all entry into or work in, confined spaces and such record shall contain the details of persons assigned for the work, the location of the work and such other details that would have a bearing on the safety and health of the persons assigned for this work. The log book so maintained shall be retained as long as the concerned workers are in service and produced to the inspector when demanded. 19. Mafntenance work, etc. -- (1) All the work connected with the maintenance of plants and equipment including cleaning of empty con­ tainers which have held hazardous substances used in the processes covered in this Schedule, shall be carried out under 'permit to work sr.stem' employing trained personnel and under the supervision of respon­ sible person, having knowledge of the hazards and precautions required to deal with them. (2) Maintenance work shall be carried out in such a manner that there is no risk to persons in the vicinity or to persons who pass by. If necessary, the place of such work shall be cordoned off or the presence of unconnected persons effectively controlled. 20. l?ermit to work system.·· The permit to work system shall inter alia include the observance of the following precautions while carrying out any specified work to be subjected to the permit to work system -- ( a) all work subject to the permit to work system shall be carried out under the supervision of a knowledgeable and responsible person ; (b) all parts of plant or machinery or equipment on which permit to work system is carried out, shall remain isolated from other parts throughout the period of permit to work and the place of work including the P!lftS of plant, machinery shall be rendered safe by cleaning, purging, washing, etc. ; (c) all work subject to the permit to work system' shall have pre­ determined work procedures which integrate safety with the work. Such procedures shall be reviewed whenever any change occurs in material or equipment so that continued safety is ensured ; TAMIL NADU FACTORIES Rums; 1950 TAMIL NADU FACTORIES RULES, 1950 [R.95 (d) persons who are assigned to car� out the permit to work system shall be physically fit in all respects taking into consideration the demands and nature of the work before entering into the confined space. Such person shall be adequately informed about the correct work proce­ dure as well as the precautions to be observed while carrying out the permit to work system ; ( e) adequate rescue arrangements wherever considered neces­ sary and adequate first-aid, rescue and resurrection arrangements shall be available m good working condition near the place of work while carrying out the permit to work system, for use in emergency ; (!) appropriate and approved personal protective equipment shall. be use while carrying out the 'permit to work system'; (g) after completion of work subject to the 'permit to work system',. fhe person responsible shall remove all the equipment and tools and restore to the original condition so as to prevent any danger while carrying out regular process. 21. Safety sampling personnel. -- The occupier shall ensure the safety of persons assigned for collecting samples by instructing them on the safe procedures. Such personnel shall be provided with proper and approved personal protective equipment, if required. 22. Ventilation. -- Adequate ventilation arrangements shall be pro­ vided and maintained at all times in the process area where dangerous or toxic or flammable or explosive substances could be evolved. These arrangements shall ensure that concentrations, which are either harmful or could result in explosion, are pot permitted to be built up in the work environment. 23. Procedures for meeting emergencies. -- (1) The occupier of every factory carrying out the works covered in Appendix 'A', shall arrange to identify all types of possible emergencies that could occur in the processes during the course of work or while carrying out maintenance work or repair work. The emergencies so identified shall be reviewed every year. (2) The occupier shall formulate a detailed plan to meet all such identified emergencies including arrangements for summoning outside help for rescue and fire-fighting and arrangements for making available urgent medical facilities. (3) The occupier shall send the list of emergencies and the details of procedures and plans formulated to meet the emergencies to the Chief Inspector of Factories. ( 4) The occupier shall' arrange to install distinctive and recogniz­ able warning arrangements to caution all persons inside the plant as well as the _neighbouring community, if necessary, to enable evacuation of persons and to enable the observance of-emergency procedures by the persons who are assigned emergency duties. All concerned must be well informed about the warning arrangement and their meaning. The ar­ i rangement must be checked for its effectiveness every month. (�Alternate power supply arrangements shall be made and inter- ,. locked with the normal P.ower supply system so as to ensure constant supply of power to the facilities and equipment meant for compliance with requirements of paragraphs 10, 11, 12, 13, 14, 18, 22 and this paragraph of Part II, Part m, Part IV and Part V of this Schedule. (6) The occupier shall arrange to suspend the further process work in a place where emergency is established and shall forthwith evacuate all pe�sons in the area except workers who have been assigned emergency duties. (7) All the employees of the factory shall be trained about the action to be taken by them including evacuation procedures during emergencies. · (8) All emer$ency procedures must be rehearsed every three months and deficiencies, if any, in the achievement of the objectives shall suitably be corrected. . (9) The occupier shall arrange to have ten per cent. of the workers trained in the use of First-Aid Fire Fighting appliances and in the rendering of specific First-Aid measures takirig into consideration the special hazards of the particular process. (10) The occupier shall furnish immediately on request the spe­ cific chemical identity of the hazardous substances to the treating physi­ cian when the information is needed to administer proper emergency or first-aid treatment to exposed persons. 241. Danger due to effluents.·· (1) Adequate precautions shall be taken to l?revent the mixing of effluents from different processes and operations wliich may cause dangerous or poisonous gases to be evolved. (2) Effluents which contain or give rise in the presence of other effluents to poisonous gases shall be provided with independent drainage systems to ensure that they may be trapped and rendered safe. PART ill FIRE AND EXPLOSIONS RISKS 1. Source of ignitiolll including lighting installation. ·- (1) No internal combustion engine and no electric motor or other electrical equipment and fittings and fixtures capable of generating sparks or otherwise causing combustion or any other source of ignition or any naked light shall be installed or permitted to be used in the process area where there could be fire and explosion hazards. (2) All hot exhaust pipes shall be installed outside a building and other hot pipes or hot surface or surfaces likely to become hot shall be suitably protected R.95] TAMIL l\tADU FACTORIES RULES, 1950 · (3) The classification of work areas in terms of its hazard potential and the selection of electrical equipment or other equipment that could constitute a source of ignition sliall be m accordance with the respective Indian Standard. ( 4) Where flammable atmosphere may be prevalent or could occur, the soles of footwear worn by workers shall have no metal on them, and the wheels of trucks or conveyers shall be conductive type. (5) All tools and appliances used for work in this area shall be of non-sparking type. ( 6) Smoking in process areas where there are risks of fire and explosion shall be prohibited, and warning notices in the language understood by majority of workers shall be posted in the factory prohib­ iting smoking in the specified areas. 2"8tatic Electricity. •• (1) All machinery and plant, particularly pipe lines and belt drives, on which static charge is likely to accumulate, shall be effectively earthed. Receptacles for flammable liquids shall have metallic connections to the earthed supply tanks to prevent static spark­ ing. Where necessary, humidity shall fie regulated. (2) Mobile Tanker-wagons shall be earthed during filling and dis­ charge and precautions shall be taken to ensure that earthing is effective before such filling or discharge takes place. 3. Lightning protection. •• Lightning protection arrangement shall be fitted where necessary, and shall be maintained. 4. Process heating. •• The method of providing heat for a process likely to result in fire and explosion shall be as safe as possible and where the use of naked flame is necessary, the plant shall be so constructed as to prevent any escaping flammable gas, vapour, or dust coming into contact with the flame, or exhaust gases, or other sources likely to cause ignition. Wher­ ever possible, the heating arrangment shall be automatically controlled at a pre-determined temperature below the danger temperature. 5. Leakage of flammable liquids. •• (1) Provision shall be made to confine by means ofbund walls, dykes, sumps, etc., possible leakages from storage vessels containing flammable liquids. (2) Waste material in contact with flammable substances shall be �isposed off suitably under the supervision of knowledgeable and respon- sible person. »> (3) Adequate and suitable fire fighting appliances shall be in- stalled in the vicinity of such vessels. · · 6. Safety valves. •• Every still and every closed vessel in which gas is evolved or into which gas is passed, and in which the pressure is liable to rise above the atmoshpheric pressure, shall have attached to it a pressure R.95] TAMIL l\tADU FACTORIES RULES, 1950 · guage and a proper safety valve or other equally efficient means to relieve the pressure. These appliances shall be maintained in good condition. 7. installation of pipe lines, etc. --All pipe lines carrying flammable or explosive substances shall be protected from mechanical damage and shall be examined by a responsible person once in a week to detect any deterioration or defects, or accumulation of flammable or explosive substances, and record kept of any defects found and repairs made. 8. Fire fighting system. -- (1) Every factory employing 500 or more persons and carrying out processes listed in Appendix 'A' shall provide -- ( a) Trained and responsible fire fighting squad so as to effectively handle the fire-fighting and life saving equipment in the event of fire or other emergency. Number of persons in this squad will necessar­ ily depend upon the size of risk involved, but in no case shall be less than eight such trained persons to be available at any time. The squad shall consist of watch and ward personnel, fire pump man and departmental supervisors and operators trained in the operation of fire and emergency services. ' (b) Squad leaders shall preferably be trained in a recognised Government institution and their usefulness enhanced by providing residence on the premises: . ( c) Squad personnel shall be provided with clothing and equip­ ment including helm.ets, boots and belts. (2) A muster roll showing the duties allocated to each member of the squad shall be prepared and copies supplied to each leader as well as displayed in prominent places so as to be easily available for reference in case of emergency. (3) The pumpman shall be thoroughly conversant with the loca­ tion of all appliances. He shall be responsible for maintaining all fire fighting equipment in proper working order. Any defect coming to his notice shall be immediately brought to the notice of squad leader. ( 4) As far as is practicable, the fire pump room and the main gate( s) o( the factory be connected to all manufacturing or storing areas through telephone interlinked and placed in a convenient location near such areas. · PART IV RISKS OF TOXIC SUBSTANCES 1. Leakage. - (1) All plants shall be so designed and constructed as to prevent the escape of toxic substance. Where necessary, separate.build­ ings, rooms, or protective structures shall be used for the dangerous stages of the process and the buildings shall be so designed as to localise any escape of toxic substances. R. 95] TAMIL NADU FACTORIES RULES, 1950 be provided to restrict the serious effects of such leakages. Catch pits shall be placed below joints in pipelines where there is danger involved to main­ tenance and other workers from such leakage. 2. Drainage. -· Adequate drainage shall be provided and shall lead to collection tanks specifically provided for this purpose wherein deleterious material shall be neutralised, treated or otherwise rendered safe before it is discharged into public drains or sewers. 3. Covering ofvessels. -· (1) Every fixed vessel or structure containing any toxic substance and not so covered as to eliminate all reasonable risk of accidental contact of any portion of the body of a worker, shall be so constructed as to avoid physical contact. (2} Such vessel shall, unless its edge is atleast 90 centimetres' above the adjoining ground or platform, be securely fenced to a height of atleast 90 centimetres above such adjoining ground or platform. (3) Where such vessels adjoin and the space between them, clear of any surrounding brick or other work is either less than 45 centimetres in width or is 45 or more centimetres in width, but is not securely fenced on both sides to a height of atleast 90 centimetres, secure barriers shalf be so placed as to prevent passage between them : Provided that sub-paragraph (2) of this paragraph shall not apply to -- and (a) saturators used in the manufacture of sulphate of ammonia; (b) that part of the sides of brine evaporating pans which require raking, drawing or filling. I 4. Continuous exhaust arrangement. -(1) Any process evolving toxic vapour, gas, fume and substance shall have efficient continuous exhaust draught. Such arrangement shall be interlocked in the process control wherever possible. (2) In the event of failure of continuous exhaust arrangement, means shall be provided to automatically stop the process. 'S. Work bench.» All the work benches used in processes involving the -, manipulation of toxic substances, shall be graded properly and shall be made of smooth impervious surface which shall be washed daily after the completion of work. 6. Waste disposal. -- (1) There shall be provided a suitable receptacle made of non-absorbable material with a tiglitlyfitting cover for depositing waste material soiled with toxic substances and the contents of ouch sstur at ors shall be destroyed by burning or using other suitable receptacle 01 ,thods unde� the s�pervision of a responsible person. , TAMIL NADU FACTORIES RULES, 1950 [R. 95 (2) Catch pits, bund walls, dykes, or other suitable safeguards shall R.95] intermediate products having toxicity is rejected on considerations of quality, sufficient precautions .shall be taken to ren�er them innocuous or otherwise treat them qr inactivate them, before disposal. _ (3) The empty containers of toxic substances shall be cleaned thoroughly before disposal under the supervision of a responsible person. PARTV SPECIAL PROVISIONS 1. Special precautions for Nitro or Amino Processes. -- (1) Unless the crystalised nitro or amino substances or any of its liquor is broken or agitated in a completely enclosed process so as not to give rise to dust or fume, such process shall be carried on under an efficient exhaust draught or byadoptmg any other suitable means in such a manner as to prevent the escape of dust or fume in the working atmosphere. (2) No part of the plant or equipment or implements which was in contact with nitro or amino compounds shall be repaired, or handled unless they have' been emptied and throughly cleaned and decontami­ nated. (3) Filling of containers with nitro or amino compounds shall be done only by using a suitable scoop to avoid' physical contact and the drying of the containers in the stove shall be done in such a manner that the hot and contaminated air from the stove is not drawn into the work room. ( 4) Processes involving the steaming into or around any vessel containingnitro or amino compounds or its raw materials shall be carried out in such a manner that the steam or vapour is effectively prevented to be blown back into the working atmoshphere. (5) Suitable antidotes such as methylene blue injections shall always be available at designated places of work for use during emergency involving the poisoning with nitro or amino compounds. - 2. Special precautions for 'chrome processes'. -- (1) Grinding and sieving of raw materials in chorme processes shall be carried on ii! such a manner and under such condition as to secure effective separation from any other processes and under an efficient exhaust draught. (2) There shall be washing facilities located very near to places where wet chrome · processes such as leaching, acidification, sulphate settling, evaporation, crystallisation, centrifigation or packing are carried out, to enable quick washing of affected parts of body with running water. (3) Weekly inspection of hand and feet of all persons employed in chrome process shall be done by a qualified nurse and record-of such inspections shall be maintained in a form approved by the .Chief Inspector of Factories. TAMIL NADU FACTORIES RULES, 1950 _J2) During the COlJ!Se of !11.an�ac�e, whenever !1llY b�tch or TAMIL NADU FACTORIES RULES, 1950 [R.95 ( 4) There shall be always available at designated places of work, suitable ointment such as glycerine, vaseline, etc., and water proof plaster in a separate box readily accessible to the workers so as to protect against perforation of nasal septum. 3. Special precautions for processes carried out in all glass vessels • .u Processes and chemical reactions such as manufacture of vinyl chloride, benzyl chloride, etc., which are required to be carried out in all glass vessels shall have suitable means like substantial wiremesh covering to protect persons working nearby in the event of breakage of glass vessel. (2) Any spillage or emission of vapour from all glass vessel due to breakage, shall be immediately inactivated or rendered innocuous by suitable means such as dilution with water or suitable solvents so as to avoid the risk of fire or explosion or health hazards. 4. Special precautions for processes involving chlorate manufacture.·· (1) Crystallisation, grinding or packing of chlorate shall not be done in a place used for any other purpose and such places shall have hard, smooth and impervious surface made of non-combustible material. The place shall be thoroughly cleaned daily. \ (2) The personal protective equipment like overall, etc., provided for the chlorate workers shall not be taken from the place of work and they shall be'thoroughly cleaned daily. (3) Adequate quantity of water shall be available near the place of -�!tlorate process for use durmg fire emergency. - · ( 4) Wooden vessels shall not be used for the crystallisation of chlorate or to contain crystallised ground chlorate. 5. Special precautions in the use of plant and equipment made from reinforced plastics. •• (1) All plant and equipments shall conform to appropriate.Indian or any other National Standard, e (2) Care shall be taken during storage, transport, handling and in­ stallation of plant and equipments to avoid accidental damage. (3) All plant and equipments shall be installed in such a way as to ensure that loads are distributed as intended in design or as per the recommendations of the manufacturers. ( 4) All pipe work shall be supported so that total loads local to the branches on the vessel or tank do not exceed their design values. (5) After erection, all plant and equipments shall be subjected to a pressure test followed by a thorough examination by a competent person. The test and examination shall be as per relevant standard. A certificate of test and examination by competent person shall be obtained and kept available at site. R. 95] . TAMIL NADU FACTORIES RULES, 1950 and examination and record maintained as per paragraph 15 m Part II of this schedule. (7) Plant and equipments during their use shall not be subjected· to overfilling or overloading beyond rated capacity. PART VI MEDICAL REQUIREMENTS 1. Decontamination facilities. - In all places where toxic substances are used in processes listed in Appendix 'A', the following provisions shall be made to meet an emergency : -- ( a) fully equipped first-aid box. (b) readily accessible means of drenching with water persons, part of body of persons, and clothing of persons who have been contaminated with such toxic and corrosive substances, and such means shall be as shown in the table below : Number of persons employed at any time Upto 50 persons between 51 to 100 101 to 200 201 to 400 401 and above Number of drenching showers 2 3 3+ 1 for every 50 persons thereafter. 5 + 1 for every 100 persons thereafter. 7 + 1 for every 200 persons thereafter. (c) a sufficient number of eye wash bottles filled with distilled water or suitable liquid, kept in boxes or cupboards conveniently situated and clearly indicated by a distinctive sign which shall be visible at all times. 2. Occupational health centre. -- In all the factories carrying out processes covered in Appendix 'A' there shall be provided and maintained m good order an occupational health centre with facilities as per scale laid down hereunder -- (1) For factories employing upto 50 workers -- (a) the services of a qualified medicalpractitioner hereinafter known as Factory Medical Officer, available on retainership basis, in his notified clinic near to the factory for seeking medical help during emer­ gency. He will also carry out the pre-employment and penodical medical examinations as stipulated in paragraph 4 of this part. (b) A minimum of five persons trained in first-aid procedures, am�mgst whom atleast one shall always be available during the working penod. : . (6) All plant and equipments shall be subjected to pe�odical test 43 8 TAM NADU FACI‘ORIES RULES. (c) A fully equipped first-aidbmt. (2) For factories employing 51 to 200 workers —- (a) The occupational health centre shall have aroom having a minimum floor area of 15 sq. m. with floors and walls made of smooth,‘ hard and impervious surface and shall he adequately illuminated, venti» lated and equipped. ‘ (b) A part-time Factory Medical Officer will be in overall charge of the Centre who shall visit the fauory minimum twice in a week and whose services shall be readily available during emergencies. (c) There shall be one qualified and trained dresserwm- compounder on duty throughout the working period. (d) A fully equipped first aid box. (3) For factories employing above 200 workers ~~ (6) There shall he one full~time factory Medical Officer for factories employing up to 500 workers and one more Medical Officer for every 1,000 workers or part thereof. _ ‘ (h) The occupational health centre in this case shall have 2 minimum of 2 rooms each having a minimum floor area of 15 square metre with floors and walls made of smooth, hard and impervious surface and shall be adequately illuminated, ventilated and equipped. (c) There shall be one trained nurse, one drew-maim- compguoder and one sweeper-cum-ward boy throughout the working peno . (d) The occupalional Health Centre in this case shall be suitably equipped to manage medical emergencies 3. Ambulance Van. -- (1) In every factory carrying out processes ‘ coveredinAppendix ‘A’, there shallbe rovided and maintainedm good . condition1 a stutably constructed and f y equipped ambulance van as per Appendix ‘C’ manned by a fulltime driver-atmymechanic and a helper, - trained in first—aid for the purposes of trans rtation of serious cases of accidents or sickness unless arrangements or procuring such facility at short notice during emer encies have heenmade withthe nearby hospital - or other places. The am ulance van shall notbe used for any urpose -, other than the purpose stipulated herein and will always be availa e near the occupational health centre. . (2 The relaxation to rocure Ambulance Vanirom nearby places provided or in sub-paragrap (1) above will not be applicable to factories employing more than 5m workers. . 4. Medical examination. -- (1) Workers employed in processes cov- ered in Ap endix ‘A' shall be medically examined by a Factory Medina Officer in t e following manner : R. 95] TAMIL NADU FACTORIES RULES, 1950 ( a) Once before employment, to ascertain physical suitability of the person to do the particular Job ; (b) Once in a period of 6 months, to ascertain the health status of the workers ; and ( c) The details of pre-employment and periodical medical ex­ aminations carried out as aforesaid shall be recorded in the regisiter in

Previous and next

All provisions of The Tamil Nadu Factories Rules,1950

Questions people ask

Is form 17 of the Tamil Nadu Factories Rules,1950 still in force?

No repeal of the Tamil Nadu Factories Rules,1950 is recorded.