Form 39 or in Form No. 17 as the case may be, The Tamil Nadu Factories Rules,1950: Form No. 39 or in Form No. 17 as the case may be
The Tamil Nadu Factories Rules,1950 - Form 39 or in Form No. 17 as the case may be
Text of form 39 or in Form No. 17 as the case may be
Form No. 39 or in Form No. 17 as the case may be.
Form No. 39 or in Form No. 17 as the case may be.
(2) Any finding of the Factory Medical Officer revealing any
abnormality or unsuitability of any person employed in the process shall
immediately be reported to the Certifying Surgeon who shall in turn,
examine the concerned workers and communicate his findings within 30
days. If the Certifying Surgeon is of the opinion that the person so
examined is required to be suspended from the process for health protec
tion he will direct the occupier accordingly, who shall not employ the said
worker in the same process. However, tlie person so suspended from the
process shall be provided with alternate placement facilities unless he is
fully incapacitated in the opinion of the Certifying Surgeon in which case
the person affected shall be suitably rehabilitated :
Provided that the Certifying Surgeon on his own may examine any
other worker whom he feels necessary to be examined for ascertaining the
suitability of his employment in the process covered inAppendix'A' or for
ascertaining the health status of any other worker and his opinion shall be
final.
(3) No person shall be newly appointed without the Certificate of
: itness granted by the Factory Medical Officer. If the Factory Medical
Officer declares a person unfit for being appointed to work in the process
covered in Appendix 'A', such person shall have a right of appeal to the
Certifying Surgeon, whose opinion shall be final in this regard.
( 4) The worker suspended from the process owing to the circum
stances covered in sub-paragraph (2) shall be employed again in the same
process only after obtaining the fitness certificate from the Certifying
Surgeon and after making entries to that effect in the health register.
PART VII
ADDITIONAL WELFARE AMENITIES
1. Washing facilities.·· (1) There shall be provided and maintained in
every factory for the use of all the workers ta{>s for washing, at the rate of
one tap for every 15 persons including liquid soap in a container with
tilting arrangements and nail brushes or other suitable means for effective
cleaning. Such facilities shall be conveniently accessible and shall be kept
in a clean and hygienic condition. ·
(2) If washing facilities as required above are provided for women,
such facilities shall be separate for them and adequate privacy at all times
shall be ensured in such facilities.
(R. 95
2. Messroom facilities. -- (1) The occupier of all the factories carrying
out processes covered in Appendix 'A' and employing 50 workers or�<?re
shall provide for all. the workers W<?rkmg � a shift, mess �o�m fac?l?t?es
which are well ventilated and provided with tables and sitting facilities
along with the provision of cold and hygienic drinking water facilities.
(2) Such facilities shall include suitable arrangements for cleaning
and washing and shall be maintained in a clean and hygienic condition. _
3. Cloak room facilities. - (1) The occupier of every factory carrying
out any process covered in appendix 'A' shall provide for all the workers
employed in the process, cloak room facilities with lockers. Each worker
shall be provided with two lockers, one for work clothing and another
separately for personal clothing and the lockers should be such as to
enable the keeping of the clothing in a hanging position.
(2) The cloak room facilities· so provided in pursuance of sub
para�aph (1) shall be located as far as possible near to the facilities
provided for washing in pursuance of paragraph 1 (1). If it is not possible
to locate the washing facilities, the cloak room facilities shall have
adequate and suitable arrangements for cleaning and washing.
4. Special bathing facilities. -- (1) The occupier of any factory carrying
out the process covered under Appendix 'B' shall erovide special bathing
facilities for all the workers employed and such facilities shall be provided
at the rate of 1 for 25 workers and part thereof, and shall be maintained
in a clean and hygienic condition. -
(2) The occupier shall insist all the workers employed in the
processes covered in Appendix 'B' to take bath after the completion of the
day's or shift work using the bathing facilities so provided and shall also
effectively prevent such of those workers taking bath in any place other
than the bathing facilities.
(3) Notwithstanding anything contained in sub-parawaph (1)
above, the Chief Inspector may require in writing the occupier of any
factory carrying out any other process for which in his opinion bathing
facilities are essential from the health point of view, to provide special
bathing facilities.
PART VIII
1. Duties of workers. - (1) Every worker employed in the processes
covered in Appendix 'A' and Appendix 'B' shall not make safety device or
appliance or any guardingor fencing arrangment, inoperative or defective
and shall report the defective condition of the aforesaid arrangement as
soon as he is aware of any such defect. ·
(2) Before corn mencing any work, all workers employed in proc
esses covered in Appendix 'A' shall check their work place as well as the
machinery, equipment or appliance used in the processes and report any
TAMIL NADU FACTORIES RULES, 1950
R.95] TAMIL NADU FACTORIES RULES, 1950
malfunction or defect immediately to the supervisor or any responsibie
person of the management.
(3) All workers shall co-operate in all respects with the manage
ment while carrying out any work or any emergency duty assigned to them
in pursuance of this schedule and shall always use all the personal
protective equipments issued to them in a careful manner.
( 4) All workers employed in the processes covered in Appendix
'A' or Appendix 'B' shall not smoke in the process area or storage area.
If special facilities are provided by the management, only such facilities
should be used:
(5) All workers employed in the processes covered in Appendix
'A' shall not remain in unauthorised place or carry out unauthorised work
or improvise any arrangements or adopt short cut method or misuse any
of the facilities provided in pursuance of the Schedule, in such a manner
as to cause risk to themselves as well as or to others employed.
( 6) The workers shall not refuse undergoing medical examination
as required under these rules.
PART IX
Restrictions on the employment of young persons under 18 years of
age and women. •• (1) The Chief Inspector of Factories may by an order
in writing restrict or prohibit the employment of women and young
persons under the age of 18, in any of the processes covered in Appendix
'A' of this schedule on considerations of health and safety of women and
young persons.
(2) Such persons who are restricted or prohibited from working in
the process due to the order issued in pursuance of sub-paragraph (1)
above shall be provided with alternate work which is not detrimental to
their health or safety. ·.·
PARTX
EXEMPTIONS
1. Power of exemption. -- The State Government or, subject to the
control of the State Government, the Chief Inspector may exempt from
the compliance with any of the requirements of this Schedule partly or
fully any factory carrying out processes covered in Appendix 'A' if it is
clearly and satisfactorily established by the occupier that the compliance
with any of the requirements is not necessary to ensure the safety and
health of persons employed as suitable and effective alternate arrange
ments are available to the requirements covered in this schedule.
APPENDIX 'A'
Any works or that part of works in which --
( a) the manufacture, manipulation or recovery of any of the
following is carried on : --
TAMIL NADU FACTORIES RULES, 1950 [R. 95
(i) Sodium, potassium, iron, aluminium, cobalt, nickel, copper, .
arsenic, antimony, chromium, zii?.c! selenium, magnesium, cadmium,
mercury, beryllium and their orgauuc and inorgamc salts, alloys, oxides
and hydroxides ;
(ii) ammonia, ammonium hydroxide and salts of ammonium ;
(iii) the organic or inorganic compounds. of �ulphurous, s1ilp_u
ric, nitric, nitrous, hydrochloric, hydrofluoric, hydroiodic, hydrosulphunc.
hydrobromic, boric ;
(iv) cynagen compounds, cyanide compounds, cyanate com-
pounds;
(v) Phosphorous and its compounds, other than organic phos
phorous insecticides ;
(vi) chlorine.
(b) Hydrogen sulphide is evolved by the decomposition of metallic
sulphides, or hydrogen sulphide is used m the production of such sul
phides;
( c) bleaching powder is manufactured or chlorine gas is produced
in chloroalkali plants ; ·
(d) (i) gas tar or coal tar or bitumen or shale oil, asphalt or any
residue of such tar is distilled or is used in any process of chemicals
manufacture ;
(ii) tar based synthetic colouring matters or their intermedi-
ates are produced ;
(e) nitric acid is used in the manufacture of nitro compounds;
(f) explosives are produced with the use of nitro compounds ;
(g) aliphatic or aromatic compounds or their metallic and non-
metallic derivatives or substituted denvatives, such as chloroform, ethyl
ene, glycol, formaldehyde, benzyle, chloride, phenol, methyl othyl keytone
peroxide, cobalt carbonyl, fungsten carbide etc., are manufactured or
recovered.
APPENDIX 'B'
•
CoNCERNING SPECIAL BArnING AccoMMODATION IN
PURSUANCE OF PARAGRAPH 4 OF PART IV
1. Nitro or amino processes.
2. All chrome processes.
3. Processes of distilling gas or coal tar or processes of chemical
manufacture in which tar is used.
4. Processes involving manufacture, manipulation, handling or re
covery of cyanogen compound, cyanide compound, cyanate compounds:
5. Processes involving manufacture of bleaching powder or
production of chlorine gas in chloroalkali plants.
6. Manufacture, manipulation or recovery of nickel and its
compounds.
7. All .vrocesses involving the manufacture, manipulation or
recovery of aliphatic or aromatic compounds or their derivatives or
substituted derivatives.
APPENDIX 'C'
Ambulance. -- Ambulance should have the following equipments : -
General --
A wheeled stretcher with folding and adjusting devices ; Head of
the stretcher must be capable of being tilted upwards ;
Fixed suction unit with equipments ;
Fixed oxygen supply with equipments ;
Pillow with case ;
Sheets;
Blankets;
Towels;
Emesis b a g ;
Bed p a n ;
Urinal;
Glass.
Safety equipment --
Flares with life of 30 minutes ;
Flood lights ;
Flash lights ; ·
Fire extingisher dry powder type ;
Insulated gauntlets.
Emergency care equipments.
Resuscitation
Portable suction unit ;
Portable oxygen unit ;
Bag valve-mask, hand operated artificial ventilation unit ;
Airways;
Mouth gags;
R.95] TAMIL NADU FACTORIES RULES, 1950
TAMIL NADU FACTORIES RULES, 1950
Traeheostomy adaptors ;
Short spine' board ;
I.V. Fluids with administration unit ; _
B.P. Manometer :
Cugg;
Stethoscope.
Immobilization --
Long and short padded boards ;
Wire ladder splints ;
Triangular bandage ;
Long and short spine boards.
Dressings --
Gauze pads -- 4 inches x 4 inches ;
Universal dressing 10 inches x 36 inches ;
Roll of aluminium foils ;
Soft roller bandages 6 inches x 5 yards ;
Adhesive tape in 3 inches roll ;
Safety pins ;
- Bandage sheets ;
Burn sheet.
[R.95
Poisoning --
Syrup of Ipecac i
Activated charcoal
Snake bite kit ;
Drinking water.
Emergency medicines --
As per requirement (under the advice of Medical Officer only)
SCHEDULE XVII
MANUFACTURE OF DICHROMATES
· (1) Application. -- The provisions of this schedule shall apply to all
actories or parts of factories in which the manufacture of dichromates is
carried on. '
Pre-packeted in doses.
(2) Prohibition of the employment of women and young persons. -
- No women or young person shall be employed or permitted to work in any
factory on the operation specified in paragraph 1.
(3) Provision of-protective clothing. -- The occupier shall provide
and maintain in good condition, loose-fitting rubber gloves of suitable
length for the use of all persons coming into contact with chrome solution
suitable protective clothing, and also for persons handling the crystals or
'immersing their hands in chrome solutions or handling textile materials
saturated with chrome solution.
( 4) First aid boxes or cupboards. -- The occupier shall provide in
readily accessible positions a sufficient number of special "First-Aid"
boxes or cupboards.
Each box or cupboard shall be distinctly marked, and shall contain,
besides any other medical appliances or requisites, a supply of : --
(i) Collodion and Brushes.
(ii) Impermeable Waterproof Plaster.
(iii) Ointment, Lint, Bandages and Scissors.
(iv) A 2 per cent. alcoholic solution of Iodine.
Nothing except appliance or requisites for First-Aid shall be kept in
a "First-Aid" box or cupboard.
Each "First-Aid" box or cupboard shall be placed under the charge
of a person who possesses the certificate granted by the St. John Ambu
lance Association, for rendering first-aid and such person shall be readily
available during working hours of the factory.
A notice or notices shall be affixed in every workroom stating the _
name of the person in charge of a box or cupboard provided in respect of
that room.
(5) Cautionary notice and inspection of workmen. -- The occupier
shall see that the Official Cautionary Notice as to the effects of chrome on
the skin is kept posted up in the works and shall arrange for an inspection
of the fingers and toes of all persons coming into contact with chrome so
lutions to be made at the works twice a week by the person in charge of
the "First-Aid" box or cupboard.
If any person whose work brings him into contact with chrome
solution or crystals shows a tendency to develop, or is known to be
R. 95] TAMIL NADU FACTORIES RULES, 1950
TAMIL NADU FACTORIES RULES, 1950 [R. 95
susceptible to chrome eczema he shall, if practicable, be transferred to
other work not exposing him to such contact.
(6) Accommodation for clothing.·· The occupier shall provide and
maintain for the use of all the persons employed suitable accommodation
of clothing, pvt off during working hours, with adequate arrangements for
drying the clothing, if wet.
The accommodation so provided shall be placed in the charge of an
official not lower in rank than a member of the supervisory staff and shall
always be kept clean.
(7) Provision and maintenance of mess-rooms. --The occupier shall
provide and maintain for the use of all the persons employed and
remaining on the premises during the meal intervals a suitable mess
room, which shall be furnished as follows : --
(a) sufficient tables and chairs or benches with back-rests;
(b) adequate means of warming food and boiling water ;
( c) suitable facilities for washing, comprising a sufficient supply ol
clean towels, soap and warm water.
(8) Processes relating to noxious dust, fume, etc. •• Processes that
give rise to noxious dust, fume, vapour or mist shall be isolated from
others and shall either be totally enclosed or provided with hoods and
suitable exhaust-ventilation.
(9) Operations which set free vapours containing particles of
· chromium.·· The operations which set free vapours containing particles
of chromium are : -
(i)
1
fusing of raw materials ;
(ii) dyeing the melted mass before cooling ; and
(iii) concentration and evaporation methods to obtain crystals of
bichromates :
The operations referred to in the first paragraph shall be carried out
by--
(a) using a closed apparatus furnished with efficient exhaust, and
(b) using an automatic system to eliminate manual 'handling.
1 -
(10) Collection of roast batch. -- A separate space shall be set apart
to collect the "roast batch" when it is drawn out from the furnace.
If the cooled "roast batch" has to be transported, it shall be done in
covered receptacles.
(11) Processes relating to solution at temperature higher than 50°C.
-- The following processes, where solutions at temperature higher than
50"C are carried out shall be provided with exhaust ventilating cowls to
carry away the vapours :
(i) Vats for lixivation.
(ii) Evaporating tanks.
(iii) Acidifying vats.
(12) Receptacles containing corrosive liquids. -- Receptacles con
taining corrosive liquids shall be effectively closed to prevent spillage of
solutions.
(13) Circulation of salines. -- The circulation of salines shall be
- carried out in. a water-tight system of pipes.
(14) Dusty operations. --· The following dusty operations shall be
carried out under exhaust ventilation or in separate rooms with adequate
ventilation : --
(i) 1Grinding of raw materials ;
(ii) emptying of containers ;
(iii) furnace cleaning
1
and withdrawal of roast ;
(iv) sifting of ingredients ;
(v) mixing of ingredients;
( vi) drying of crystals ; and
(vii) packing of products.
(15) Provision of respiratory protection. -- All workmen shall be
provided with efficient respiratory protection.
(16) Maintenance and supervision of protective equipment. -
Proper maintenance and supervision of ali protective clothing equipment
shall be provided.
R. 95] TAMIL NADU FACTORIES RULES, 1950
(17) Collection of waste materials. •• All waste materials shall be
collected in tanks or store-houses and protected from rain so that the soil
may not be contaminated.
(18) Cautionary notices. •• Cautionary notices as to the dangers ,
associated with "Chromates" shall be conspicuously displayed in the
factory where they may be easily and conveniently read by the workers.
(19) Examination of workmen. --The worker shall be examined daily
to see that they do not have any lesions of the skin.
(20) Examination of workmen by the Certifying Surgeon. •• Every
workman shall be examined once in a month by the Certifying Surgeon
and the result entered in the Health Register in Form No.17.
(21) Supply of protective ointment or cream. -- Protective ointment
or cream for application on limbs and in the nose shall be supplied to all
workers.
(22) Provision of washable working clothes and washing
facilities. -- All workmen shall be provided with washable working
clothes, kept in good order.
Adequate provision of washing facilities shall also be provided.
(23) Maintenance of tools. --All tools issued to the maintenance-staff
shall be washed daily and kept clean. No fee or charge shall be realized
from any worker for this purpose.
(24) Provision of protective footwear. -- All workers on furnaces
shall be provided with protective footwear such as wooden sandals.
SCHEDULE XVIII
Compression of oxygen and hydrogen produced by the
electrolysis of water
1. The room in which electrolyser plant is installed shall be separate
from the plant for st9ring and compressing the, oxygen and hydrogen and
also the electric generator room.
1[2. The purity of oxygen and hydrogen shall be tested by a competent
person at least once in every shift at the following points : -
TAMIL NADU FACTORIES RULES, 1950 [R.95
officers
Typewritten text
1Subs. by G.O. Ms.No. 547, dated the 8th July, 1972.
TAMIL NADU FACTORIES'.RULES, 1950
(i) in the electrolysis room ;
(ii) at the gas-holder inlet ; and
(iii) at the suction end of the compressor.
The purity figures shall be entered in the register and signed by the
persons carrying out such tests :
Provided however, that if the electrolyser plant is fitted with auto
matic recorded to purity of oxygen and hydrogen with alarm lights, it shall
be sufficient if the purity of the gases is tested at the suction end of the
compressor only.]
3. The oxygen and hydrogen gases shall not be compressed if their
purity as determined under clause 2 above falls below 98 per cent. at any
time.
3-A. The bell of any gas-holder shall not be permitted to go within 30
ems. of its lowest position when empty and a limit switch shall be fitted to
the gas-holder in such a manner as to switch off the compressor motor
when this limit is reached.
1(4. In addition to the limit switch in the gas-holder, a sensitive
negative pressure switch shall be provided in, or adjacent to the suction
main for hydrogen, close to the gas-holder and between the gas-holder
and the hydrogen compressor to switch off the compressor motor in the
event of the gas-holder being emptied to the extent as to cause vacuum.]
2(5. Omitted.]
6. The water and caustic soda and caustic potash used for making
electrolytes shall be of standards suitable for electrolysis.
7. Electrical connections at the electrolyser cells and at the electric
generator terminals shall be so constructed as to preclude the 'possibility
of wrong connections leading to the reversal of polarity and in addition an
automatic device shall be provided to cut off power in the event of reversal
of polarity owing to wrong connections either at the switch board or at the
electric generator terminals.
8. Oxygen and hydrogen gas pipes shall be painted with distinguish
ing colours. Whenever an hydrogen pipe is opened for repairs or any other
1 Subs. by G.0. Ms. No. 547, dated the 8th July, 1974.
2 Omitted by G.O. Ms. No. 547, dated the 8th July, 1974.
R. 95]
TAMIL NADU FACTORIES RULES, 1950 [R.95
work, on re-connection the pipe shall be purged of all air before hydrogen
is allowed to pass through that pipe :
Provided that after repairs, hydrogen pipes shall preferably be
purged by an inert gas like nitrogen, whenever possible, before introduc
ing hydrogen for final purging.
9. All electrical wiring and apparatus in the electrolyser room and
hydrogen compression room shall be of flame-proof construction or
enclosed in flame-proof fittings and no naked light or, flame shall be
allowed to be taken either in the electrolyser room or where compression
and filling of the gases is carried on and such warning notices shall be
exhibited in prominent places.
10. No part of the electrolyser plant and the gas-holders and com
pressor shall be subjected to welding, bracing, soldering or cutting until
steps have been taken to remove any explosive substance from that part
and render the part safe for such operations and after the completion of
such operation no explosive substance shall be allowed to enter that part
until the metal has cooled sufficiently to prevent risk of explosion.
11. No work of operation, repair or maintenance shall be undertaken
except under the direct supervision of a person who by his training,
experience and knowledge of the necessary precautions against risk of
explosion is competent to supervise such work. No electric generator
after erection or repairs shall be switched on to the electrolysers unless
the same is certified by the competent persons under whose direct
supervision erection or repairs are carried on to be in a safe condition
and the terminals have been checked for the polarity as required by
clause 7.
12. Every part of the electrolyser plant and the gas-holders and
compressor-shall have a regular schedule of overhaul-and checking and
every defect noticed shall be rectified forthwith.
1[SCHEDULE
XIX
Manipulation of Stone or any other material containing free �ilica
1. Application ••• This Schedule shall apply to all factories or parts·
of factories in which manipulation of stone or any other material contain
ing free silica is carried on.
1 Subs. by G.O. Ms. No. 2223, L & E, dated the '6th October; 1988.
R.95] . TAMIL NADU FACTORIES RULES, 1950
2. Defnnniitions ••• For the purpose of this Schedule -
(a) "manipulation" means crushing, breaking, chipping, dressing,
grinding, sieving, mixing, grading or handling of stone or any other
material containing free silica or any other operation involving such stone
or material ;
(b) "Stone or any other material containing free silica" means a
stone or any other solid material containing not less than five per cent. by
weight of free silica ,
3. Precautlons in manipulations ••• No manipulation shall be carried
out in a factory or part of a factory unless one or more of the following
measures, namely :-
(a) damping the stone or other material being processed,
(b) providing water spray,
( c) enclosing the process,
(d) isolating the process, and
(e) providing localised exhaust ventilation,
are adopted so as to effectively control the dust in any place in the factory
where any person is employed, at a level equal to, or below the maximum
permissible level for silica dust as laid down in Table 2 appended to Rule
102-A:
Provided that such measures as abovesaid are not necessary if the
process or operation itself is such that the level of dust created and
prevailing does not exceed the permissible level referred to.
4. Maintenance of floors.-· (1) All floors or places where fine d�st
is likely to settle on and whereon any person ha: to work or pass shall by
of impervious material and maintained in such condition that they can be
thoroughly cleaned by a moist method or any other method which would
prevent dust being airborne in the process of cleaning.
(2) The surface of every floor of every work-room or place where
any work is carried on or where any person has to pass during the course
of its work, shall be cleaned of dust once at least during each shift after
[R.95
being sprayed with water or by any other suitable method so as to prevent
dust being airborne in the process of cleaning.
5. Prohibition relating young persons ,» No young person shall be
employed or permitted to work in any of the operations, involving
manipulation or at any place where such operations are carried on.
6. Medical facilities and records of examination and tests ,» ( 1) The
occupier of every factory to which the schedule applies shall -
(a) employ a qualified medical officer for medical surveillance
of the workers employed therein whose employment shall be subject to
the approval of the Chief Inspector of Factories ; and
(b) provide to the said medical officer all the necessary
_facilities for the purpose referred to in clause (a).
(2) The record of medical examination and appropriate tests
carried out by the said Medical Officer shall be maintained in a separate
register approved by the Chieflnspector of Factories, which shall be kept
readily available for inspection by the Inspector.
_ 7. Medical examination by Certifying Surgeon .-- ( 1) Every worker
employed in the processes specified in paragraph 1, shall be examined by
a Certifying Surgeon within fifteen days of his first employment. Such
medical examination shall include pulmonary function tests and chest
X-ray. No worker shall be allowed to work after fifteen days of his first
employment in the factory unless certified fit for such employment by the
Certifying Surgeon.
(2) Every worker employed in the said process shall be re-ex
amined bya Certifying Surgeon at least once in every twelve months. Such
examination shall, wherever the Certifying Surgeon considers ap
propriate, include all the tests as specified in sub-paragraph (1) except
chest X-ray which will be once in three years.
(3) The Certifying Surgeon after examining a worker, shall issue
a Certificate of Fitness in Form No. 27. The record of re-examinations
carried out shall be entered in the certificate and the certificate shall be
kept in the custody of the Manager of the factory. The record of each
examination carried out under sub-paragraphs (1) and (2), including the
TAMILNADU FACTORIES RULES, 1950
R.95]
nature and the results of the tests, shall also be entered by the Certifying
Surgeon in a Health Register in Form No. 17.
( 4) The Certificate of Fitness and the health register shall be kept
readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a
worker is no longer fit for employment in the said processes on the ground
that continuance therein would involve special danger to the health of the
worker, he shall make a record of his findings in those documents should
also include the period for which he considers that the said person is unfit
for work in the said processes. The person so suspended from the process
shall be provided with alternate placement facilities unless he is fully
incapacitated in the opinion of the Certifying Surgeon, in which case the
person affected shall be suitably rehabilitated.
(6) No person who has been found unfit to work as said in
sub-paragraph (5) above shall be re- employed or permitted to work in
the said processes unless the Certifying Surgeon, after further examina
tion, again certifies him fit for employment in those processes.
8. Exemptions ••• If in respect of any factory, the Chief Inspector is
satisfied that owing to the exceptional circumstances or infrequency of
the processes or for any other reason, all or any of the provisions of this
Schedule is not necessary for protection of the workers in the factory; the
Chief Inspector may issue a certificate in writing, which he may in his
discretion revoke at any time, exempt such factory from all or any of such
provisions subject to such conditions, if any, as he may specify therein.]
l[SCHEDULE XX
Handling and Processing of Asbestos, Manufacture of any article
of asbestos and any other process of
manufacture or otherwise in which Asbestos is used in any form.
1. Application. -- This Schedule shall apply to all factories or parts
of factories in which any of the following processes is carried on --
(a) breaking, crushing, disintegrating opening, grinding, mixing
or sieving of asbestos and any other processes involving handling and
manipulating of asbestos incidental thereto ;
1 Subs. by µ.O. Ms. No 1717, Labour, dated the 2nd September, 1986.
'
TAMILNADU FACTORIES RULES, 1950
'TAMILNADUFACTORIESRULES, 1950 [R.95
(b) all processes in the manufacture of asbestos textiles including
preparatory and finishing processes ;
(c) making of insulation slabs or sections, composed wholly or
partly of asbestos and processes incidental thereto ;
(d) making or repairing of insulating mattresses, composed whol-
ly or partly of asbestos and processes incidental thereto ;
(e) .manufacture of asbestos card-board and paper ;
(f) manufacture of asbestos cement goods ;
(g) application of asbestos by spray method ;
(h) sawing, grinding, turning, abrading and polishing'in dry state
of articles composed wholly or partly of asbestos ;
(i) cleaning of any room, vessel, chamber, fixture or appliance for
the collection of asbestos dust ; and
(j) any other processes in which asbestos dust is given off into the
work environment.
2. Definitions. •• For the purpose of this schedule --
(a) "Asbestos" means any fibrous silicate mineral and any admix
ture containing actionlite, amosite, anthophyllite, dhrysotile, crocidolite,
tremolite or any mixture thereof, whether crude, crushed or opened ;
(b) "asbestos textiles" means yarn or cloth composed of asbestos
or asbestos mixed with any other materials ;
(c) "approved" means approved for the time being in writing by
the Chief Inspector ;
(d) "breathing apparatus" means a helmet or face piece with
necessary connection by means of which a person using it breathes air
free from dust, or any other approved apparatus ;
(e) "efficient exhaust draught" means localised ventilation by
mechanical means for the removal of dust so as to prevent dust from
escaping into air of any place in which work is carried on. No draught
shall be deemed to be efficient which fails to control dust produced at the
point where such dust originates ; -
R.95] TAMIL NADU FACTORIES RULES, 1950
(f) "preparing" means crushing, disintegrating, and any other
processes in or incidental to the opening of asbestos ;
(g) "protective clothing'' means overalls and head covering' which
(in either case) will, when worn, exclude asbestos dust.
3. Toolls alllldl equipmemt. -Any tools or equipment used in processes
� to which this schedule applies shall be such that they do not create
asbestos dust above the permissible limit or are equipped with efficient
exhaust draught.
41. Exlnaunst d1rauglht. -- (1) An efficient exhaust draught shall be
provided and maintained to control dust from the following processes
and machines :
(a) manufacture and conveying machinery, namely: -
(i) preparing, grinding or dry mixing machines ;
(ii) carding, card waste and ring spinning machines and
looms ;
(iii) machines or other plant fed with asbestos ; and
(iv) machines used for the sawing, grinding, turning, drilling,
abrading, or polishing ; in the dry state of articles composed wholly or
partly of asbestos ;
(b) cleaning and grinding of the cylinders or other parts of a
carding machine ;
(c) chambers, hoppers or other structures into which loose
asbestos is delivered or passes ;
(d) work-benches for asbestos waste sorting or for other
manipulation of asbestos by hand ;
(e) work places at which the filling or emptying of sacks, skips
or other portable containers, weighing or other process incidental thereto
which is effected by hand, is carried on ;
(f) sack cleaning machines ;
(g) mixing and blending of asbestos by hand ; and
(h) any other process in which dust is given off into the work
environment.
TAMILNADU FACTORIES RULES, 1950 [R.95
(2) Exhaust ventilation equipment provided in accordance with
sub-paragraph (1) shall, while any work of maintenance or repair to the
machinery apparatus or other plant or equipment in connection with
which it is provided is being carried on, be kept in use so as to produce
an exhaust draught which prevents the entry of asbestos dust into the air
of any workplace.
(3) Arrangements shall be made to prevent asbestos dust dis
charged from exhaust apparatus being drawn into the air of any
workroom.
( 4) The asbestos bearing dust removed from any workroom by the
exhaust system shall be collected in suitable receptacles or filter bags
which shall be isolated from all work areas.
5. Testing and examination of ventilating system. -- (1) All ventilat
ing systems used for the purpose of extracting or suppressing dust as
required by this schedule shall be examined· and inspected once every
week by a responsible person. It shall be thoroughly examined and tested
by a competent person once in every period of 12 months. Any defects
found by such examinations or test shall be rectified forthwith.
(2) A register containing particulars of such examinations and
tests and the state of the plant and the repairs or alterations (if any) found
to be necessary shall be available for inspection by an Inspector.
6. Seggregation in case of certain process. -- Mixing of blending by
the hand of asbestos, or making or repairing _of insulating mattresses
composed wholly or partly of asbestos shall not be carried on in any room
in which any other work is done.
7. Storage and distribution ofloose asbestos. -- All loose asbestos
shall while not in use, be kept in suitable closed receptacles which prevent
the escape of asbestos dust therefrom such asbestos shall not be dis
tributed within a factory except in such receptacles or in a totally enclosed
system of conveyance.
8. Asbestos sacks. -- (1) All sacks used as receptacles for the purpose
of transport of asbestos within the factory shall be constructed of imper
meable materials and shall be kept in good repair.
(2) A sack which has contained asbestos shall not be cleaned by
hand beating but by a machine, complying with paragraph 3.
R.95] TAMIL NADU FACTO�ES RULES, 1950
9. Maintenance of floors and workplaces. •• {1) In every room in
which any of the requirements of this schedule apply --
(a) the floors, work-benches, machinery and plant shall be
kept in a clean state and free from asbestos debris and suitable arrange
ments shall be made for the storage of asbestos not immediately required
for use; and
(b) the floors shall be kept free from any materials, plant or
other articles not immediately required for the work carried on in the
room, which would obstruct the proper cleaning of the floor.
-
(2) The cleaning as mentioned in sub-rule (1) shall, so far as is
practicable, be carried out by means of vacuum cleaning equipment so
designed and constructed and so used that asbestos dust neither escapes
nor is discharged into the air of any workplace.
-- (3) When the cleaning is done by any method other than that
mentioned in sub-paragraph (2), the persons doing cleaning work and
any-ether person employed in that room shall be provided with
respiratory protective equipment and protective clothing.
( 4) The vacuum cleaning equipment used in accordance with
provisions of sub-paragraph (2) shall be properly maintained and after
each cleaning operation, its surface kept in a clean state and free from
asbestos waste and dust.
(5) Asbestos waste shall not be permitted to remain on the floors
or other surface at the work place at the end of the working shift and shall
be transferred without delay to suitable receptacles. Any spillage of
asbestos waste occurring during the course of the work at any time shall
be removed and transferred to the receptacles maintained for the pur
pose without delay.
10. Breathing apparatus and protective clothing. • • (1) An ap
proved breathing apparatus and protective clothing shall be provided and
maintained in good condition for use of every person employed --
(a) in chambers containing loose asbestos;
(b) in cleaning, dust settling or filtering chambers of apparatus;
(c) in cleaning the cylinders, including the doffer cylinders, or
other parts of a carding machine by means of hand-stickies ; and
(d) in filling, beating or levelling in the manufacture or repair
of insulating mattresses ; and
(e) in any other operation or circumstances in which it is
impracticable to adopt technical means to control asbestos dust in the
work environment within the permissible limit.
(2) Suitable accommodation in conveniently accessible posi
tion shall be provided for the use of persons when putting on or taking
off breathing apparatus and protective clothing provided in accordance
with this rule and for the storage of such apparatus and clothing when not
in use.
(3) All breathing apparatus and protective clothing when not
in use shall be stored in the accommodation provided in accordance with
sub-rule {2) above.
( 4) All protective clothing in use shall be de- dusted under an
efficient exhaust draught or by vacuum cleaning and shall be washed at
suitable intervals. The cleaning schedule and procedure should be such
as to ensure efficiency in protecting the wearer.
(5) All breathing apparatus shall be cleaned and disinfected at
suitable intervals and thoroughly inspected once every month by a
responsible person.
( 6) A record of the cleaning and maintenance and of the
condition of the breathing apparatus shall be maintained in a register
provided for that purpose which shall be readily available for inspection
by an Inspector. ·
(7) No person shall be employed to perform any work specified
in sub-paragraph (1) for which breathing apparatus is necessary to be
provided under the sub-paragraph unless he has been fully instructed in
the proper use of that equipment.
(8) No breathing apparatus provided in pursuance of sub-para
graph (1) which has been worn by a person shall be worn by another
person unless it has been thoroughly cleaned and disinfected since last
being worn and the person has been fully instructed in the proper use of
that equipment.
11. Separate accommodation for personal clothing. •• A separate
accommodation shall be provided in a conveniently accessible position
for all persons employed in operations to which this schedule applied for
TAMILNADU FACTORIES RULES, 1950 [R.95
R.95] TAMILNADU FACTORIES RULES, 1950
.,
storing of personal clothing. This should be separated from the accom
modation provided under sub-paragraph (2) to prevent contamination. Jf
personal clothing.
12. Washing and bathing facilities.·· {1) There shall be provided
and maintained in a clean state and in good repair for the use of all
workers employed in the processes covered by the schedule, adequate
washing and bathing places having a constant supply of water under cover
at the rate of one such place for every 15 persons employed.
{2) The washing places shall have stand pipes placed at intervals
of not less than one metre.
{3) Not less than one half of the total number of washing places
shall be provided with bathrooms.
( 4) Sufficient supply of clean towels made of suitable material
shall be provided :
Provided that such towels shall be supplied individually for each
worker if so ordered by the Inspector.
(5) Sufficient supply of soap and nail brushes shall be provided.
13. Messroom. •• (1) There shall be provided and maintained for
the use of all workers employed in the factory covered by this schedule,
remaining on the premises during the rest intervals, a suitable messroom
which shall be furnished with --
(a) sufficient tables and benches with back rest; and
(b) adequate means for warming food.
{2) The messroom shall be placed under the charge of a respon
sible person and shall be kept clean.
14. Jl>rohibition of employment of young persons ••• No young person
shall be employed in any of the process covered by this schedule.
15. Prohibition relating to smoking.·· No person shall smoke in any
area where processes covered by this schedule are carried on. A notice
in the language understood by majority of the workers shall be posted in
the plant prohibiting smoking at such areas.
[R.95
16. Cautionary notices. -(I) Cautionary notices shall be displayed
at the approaches and along the perimeter of every asbestos processing
area to warn all persons regarding :
(a) hazards to health from asbestos dust,
(b) need to use appropriate protective equipment,
(c) prohibition of entry to unauthorised persons or authorised
persons but without protective equipment.
(2) Such notices shall be in the language understood by the
majority of the workers.
17. Air monitoring. - To ensure the effectiveness of the control
measures, monitoring of asbestos fibre in air shall be carried out once at
least in every shift and the record of the results so obtained shall be entered
in a register specially maintained for the purpose. 1[AII factories should adopt
membrane filter test without fail.
Explanation. - " Membrane Filter Test " is defined as the method of
determination of airbone asbestos fibre concentration in work environment
by light microscopy (Membrane Filter Method).]
2(18. Medical facilities and records of medical examinations and tests.
- (I) The occupier of every factory to which the schedule applies, shall-
(a) employ a qualified medical practitioner for medical
surveillance of the workers employed therein whose employment shall be
subject to the approval of the Chief Inspector of Factories;
(b) provide to the said medical practitioner all the necessary
facilities for the purpose referred to in clause (a).
(2) The record of medical examinations and appropriate tests carried
out by the said medical practitioner shall be maintained in a separate register
approved by the Chief Inspector of Factories, which shall be kept readily
available for inspection by the Inspector.
19. Medical Examination by Certifying Surgeon. -(1) Every worker
employed in the processes specified in paragraph (1) shall be examined by
a Certifying Surgeon within 15 days of his first employment. Such
examination shall include pulmonary function tests, for detecting asbestos
body in sputum and chest X-ray. No worker shall be allowed to work after
15 days of his first employment in the factory unless certified fit for such
employment by the Certifying Surgeon.
1 Added by GO. Ms. No. 46, L & E (M-2), dated the 28th April, 2006.
2 Subs. by GO. Ms. No. 2223, L & E, dated the 6th October, 1988.
TAMIL NADU FACTORIES RULES, 1950
R. 95] TAMIL NADU FACTORJES RULES, 1950 461
(2) Every worker employed in the said processes shall be re-examined
by a Certifying Surgeon at least once in every twelve calendar months. Such
examinations shall, wherevfl the Certifying Surgeon considers appropriate, include
all the tails spmified in sub-paragraph (1) except chest X-ray which will be (a'ried
out once in three years.
(3) The Certifying Surgeon fifla’examinirlgawodcer, shall issueaoa‘tifimte
offiiness in ‘[Form No. 27]. The record ofexamination and rte—examinations carried
out shall be entered in the Cafificote and the Cetlifiwle shall be kept iii the custody
of the Manager ofthe Factory. The record ofeach examination can'ied out under
sub—paragraphs (l) and (2), including the nature and the results ofthe tests, shall
also be entered bythe Certifying Surgeon in a Health Register in Form 17. 2[The
said register containing the health record ofevery worker shall he maintained by the
omipileroftilefactoryforaminimmn period offonyycas ficmthedateafbeginning
ofthe employment or fiflecn years aflJer retirement or cessation of employment,
whidleva is later]
(4) The certificate offimess and the health register shall he kept readily
available for inspeaion by the Iospeaoc
(5) Lfat any time the Certifying Surgeon is ofthe opinion that a worker is
no longer fit for employment in the said processes on the ground that continuance
therein would involve special danger to the health ofthe worker, he shall make a
record ofhis findings in llle said certificate and the Health Register The entry ofhis
findings in those documents should also include the period for which he considers
that the said person is unfit to work in the said processes The person so suspended
from the process shall be provided with alternate placement ficilities unless he is
fully incapacitated in the opinion ofthe Certifying Surgeon, in which msetile person
afieaed shall be suitably rehabilitated
(6) No person who has been found unfit to work as said irl sub-pamgaph
(5) above shall be re—employed or permitted to work in the said processes unless
theCnfifying Surgmrl, aflerfllrrhermaminafinn, again certifies himfitfara-nplaymeit
in those times]
2|). Exemptions. ~— lf in respect ofany factory, the Chieflnspector is
satisfied that owing to the exceptional circumstances or infrequency of the
processes or for any other reason, all or any of the provisions of this
schedule is not necessary for protection of the workers in the Eatery, the
Chief Inspector may by a certificate in writing, which he may at his discretion
revoke at anytime, exempt such factory fi-om all or any ofsuch provisions subject
to such conditions ifany, as he may specify thaein]
‘ Subs. for the expression
“
Form 27-A ", by 0.0. Ms. Not 121, Labour &
Employment (M-Z). dated the 31st July, 2012.
“Added by (10. Ms. Na. 46, L a a (Ni-2), dated the 28th April, 2005.
4 6 2 TAMIL NADU FACFDRIES RULES. 1950 (R. 95
SCHEDULE XXI
deling and mmlipulan'on afcurrosive nit/stances
1. Definitions. -- For the purpose of this Schedule --
(a) “Corrosive operation” means any manufacturing process,
storing, handling, processing, packing or using any corrosive substance
in a factory.
(b) "Corrosive substance" includes sulphuric acid, nitric acid1
hydrochloric acid, hydrofluoric acid, oarbolic acid, phosphoric acid,
liquid chlorine, liquid bromine, ammonia, sodium hydroxide and potas-
sium hydroxide and a mixture thereof, and any other substance which the
State Government by notification in the Official Gazelle specin to he
corrosive substance.
2. Flooring.
-- The floor of every workroom of a factory in which
corrosive operation is carried on shall he made of impervious, corrosion
and fire resistance material and shall be so constructed as to prevent
collection of any corrosive substance The surface of such flooring shall
he smooth and cleaned as often as necessary and maintained in a sound
condition.
3. Protective equipmen
-- (a) The occupier shall provide for the use
of all persons employed in any corrosive operation suitable protective
wear for hands and feet, suitable aprons, face shields, chemical safety
goggles and respirators. The equipmenls shall be maintained in good
order andshallhe keptin clean and hygienic wnditionbysuitably treating
to get rid of the ill-effects of any absorbed chemicals and by disinfecting
The occupier shall also provide suitable protective creams and other
preparations Wherever necessary.
(b) The protective equipment and preparations provided shall be
used by Lhe persons employed in any corrosive operations.
4. Water facilities. —- Where any corrosive operation is carried on,
there shallbe provided as close to Lhe place of such operation as possible,
a source of clean water at aheight of 210 cm. (7 feet) from a pipe 1.25 cm.
(1/2 inch) diameter and fitted with a quick acting valve so that in case of
injury to the worker by any corrosive substance the injured part can be
thoroughly flooded with water. Whenever neoessary, in order to ensure
11,95] . TAMIL Naou FAcronras RULES, 1950 4 5 3
continuous water supply, a storage tank having minimum length, breadth
and height 0(210 cm" 121) cm., and 60 cm. respectivelyor such dimensions
as are approved by the Chief Inspector shall be provided as the source of
clean water.
5. Cautionary notice. -- A mutionary notice in the following form
and printed in the language which is understood by majority of the
workers employed,shall be displayed prominently and close [0 the place
where any corrosive operation is carried out and where it can be easily
and conveniently read by the worker If any worker is illiterate, effective
stepsshall be taken to explain carefully to him the contents ofthe noLice
so displayed.
‘
Cannons“ NOTICE
Corrosive substances cause severe burns and the vapours thereof,
may be'extremely hazardous In case of contact, immediately flood the
part affected with plenty of water for at least 15 minutes.
Get medical attention quickly.
6. Transport. .. (a) Corrosive substances shall not be filled, moved
orrcarried except in z[containers or through pipes and when they are to
be transported in containers] they shall be included in crates of sound
construction and of sufficient strength.
([2) a container with a capacity of 11.5 litres (2— 1/1 gallons) or
more of a corrosive substance shall be placed in receptacle or crate and
then carried by more than one person at a height below the Waist line
doles asuitahle rubber wheeled truck is used for the purpose.
(c) Containers for corrosive substance shall be plainly labelled.
7. Devices for handling corrosives. -- (a) firming, lifting or pumping
arrangements] shall be used for emptying jars, unboys and other eon-
tainers of cormsives.
(b) Corrosive substances shall not be handled by bare hands but
shall be handled by means of a suitable scoop or other device./‘
"
ll. Opening of valves. -- Valves fitted to containers holding a cor-
rosive substance shall be opened with great care. If they do not work
‘
Suns by 6.0, Ms. No. 1717, labour, dated the 2nd September.1986.
4 5 a TAMIL NADU FAcromes RULES, 1950 [11. 95
treely, they shall not be forced open They shall be opened by a worker
suitably trained for that purpose.
9. Cleaning tanks, stills, etc. — (a) In cleaning out or removing
residues fromstills or other large chambers used for holding any corrosive
substance, suitable implements made of wood or other material shall be
used to prevent production of arseniuretted hydrogen (Arslne).
((7) Whenever it is necessary for the purpose of cleaning or other
maintenance work for any worker to enter chamber, tank, wt, pit or other
confined space where a corrosive substance had been stored, all possible
precautions required under section 36 of the Factories Act, 1948 shallbe
taken to ensure the worker’s safety.
(5) Wherever possible, before repairs are undertaken to any part
of equipment in which a corrosive substance was handled, such equip-
ment or part thereof shall be freed of any adhering corrosive substance
by adopting suitable methods.
10. Storage.
-- (n) Corrosive substances shall not be stored in the
same room with other chemicals, such as turpentine, carbides, metallic
powders and combustible materials, the accidental mim’ug with which
may cause a reaction which is either violent or gives rise to toxic fumes
and gas.
(1;) Pumping or filling overhead tnnlm, receptacles, vats or other
containers for storingcorrosive substances shall be so arranged that there
is no possibility of any corrosive substance overflowing and causing injury
to any person.
(c) Every container having a capacity of twenty litres or more on
every pipe line, valves, and fitting used [or storing or carrying corrosive
substances shall be thoroughly examined every year for finding out any
defects and defects shall be removed forthwith. A register shall be
'
maintained of every such examination made and shallbe produced before
the Inspector whenever required.
11. Fire mtlinguishers and fire—fighting equipment.
-- An adequate
number of suitable type of fire extinguishers or other fire fighting equip»
ment, depending on the nature of chemicals stored shall be provided.
Such extinguishers or other equipment shall be regularly tested and
refilled, Clear instructions as to how the extinguishers or other equipment
R.95]
should be used printed in the language which majority of the workers
employed understand, shall be affixed near each extinguisher or.._ rher
equipment.
12. Exemption. -- If in respect of any factory on an application made
by the manager, the chief Inspector is satisfied that owing to the excep
tional circumstances or the infrequency of the process or for any other
reason to be recorded by him in writing, all or any of the provisions of this
schedule are not necessary for the protection of the persons employed
therein, he may by a certificate in writing, which he may at any time
revoke, exempt the factory from such of the provisions and subject to such
conditions as he may specify therein.]
SCHEDULE xxn
Manufacture or manipulation of Carcinogenic Dye Intermediates.
1. Application. •• This Schedule shall apply in respect of all factories
or any part thereof in which process of manufacturing or manipulation of
a Carcinogenic Dye Intermediates (hereinafter referred to as the said
manufacturing process) is carried on:
Provided that paragraphs 25''anp 26 s�all only apply to a process
involving manufacture or manipulation dtcompounds mentioned in A.p- '
pendix B (hereinafter referred.to as the said manufacturing process B).
Jl.>ARTII
2. IDefinitions. •• For the purposes of this Schedule, --
(a) "Air Line Respirator" means a helmet or face piece with
necessary connections by means of which a person using it in a poisonous,
or irritant atmosphere breathes ordinary air or any other suitable ap
paratus approved in writing by the Chief Inspector ;
(b) "Approved" means approved by the Chief Inspector of Fac-
tories; ·
(c) "Efficient Exhaust Draught" means localised ventilation ef
fected by mechanical means for the removal of gas, vapour, dust or fume
so as to prevent them from escaping into the air or any place in which
work is carried on. No draught shall be deemed to be efficient which fails
TAMILNADU FACTORIES RULES, 1950
to remove smoke generated at the point where such gas, vapour, fumes
or dust originates ; -
(d) "First employment" means first employment in the said
manufacturing process and also re- employment in such manufacturing
process following any cessation of employment for continuous period
exceeding three calendar months ;
(e) "Manipulation" includes mixing, blending, filling, emptying,
grinding, sieving, drying, packing, sweeping, handling, using or chemical
processing of a nitro or amino compound ;
I
(f) "Nitro or amino compound" means a nitrated or aminated
compounds of arematic hydrocarbons mentioned in Appendix A or B
attached thereto.
3. Cautionary Placard. •• Cautionary placard in the form specified
in Appendix C attached to this Schedule and printed in the language of
the majority of the workers employed shall be affixed in prominent places
frequented by them in the factory where the placards can be easily and
conveniently read by the workers ; and arrangement shall be made by the
occupier to instruct periodically all workers employed in the said
manufacturing process regarding the precautions contained in the cau-
tionary placard. '
4. Prohibition relating to employment of women and young persons.
-� No woman or young person shall be employed or permitted to work in
any room in which the said manufacturing process is carried on or in
which a nitro or amino compound is stored.
S. Air space. •• In every room in which, the said manufacturing
process is carried on there shall be at least 15 centimetres of air space
excluding any space loccupied by machinery, equipments or any other
article for each person employed therein and in computing this air space
no height over 4.25 metres shall be taken into account.
6. Efficient exhaust draught. •• Unless the said manufacturing
process is completely enclosed so as not to give rise to dust or fume it
shall not be carried on without the use of an efficient exhaust draught
when a nitro or amino compound -- ·
(a) is introduced into a tank, hopper, machine or container or
filled into cartridge ; or
(b) is ground, crushed, mixed, sieved or blended.
TAMILNADU FACTORIES RULES, 1950 [R.95
R.95] TAMIL NADU FACTORIES RULES, 1950
7. JFloor of workrooms.»- The floor of every workroom in which the
said manufacturing process is carried on shall be ( a) smooth and imper
vious to water provided that asphalt or tar shall not be used in the
composition of the floor, (b) maintained in sound condition, ( c) slope and
provided gutters and ( d) thoroughly washed daily by means of hose pipe
and drain water shall be led into a sewer through a closed channel.
8. Work-benches • • • Work-benches on which a nitro or amino com
pound is manipulated shall (a) have a smooth impervious surface
preferably of stainless steel ; and (b) shall be' washed daily with a hose
pipe or cleaned by means of a suction cleaning apparatus at a time when
no other work is being carried on there.
9. Waste. •• (1) A suitable receptacle made of non-absorbable
material with a tightly fitting cover shall be provided and used for deposit
ing waste, like cloth, paper or other material soiled with a nitro or amino
compound.
(2) All such contaminated waste material shall be destroyed by
burning at least once a week.
10. Empty containers. •• Empty containers used for holding com
pounds included under Appendix A shall be thoroughly cleaned of their
· contents and treated with an inactivating agent before being discarded.
11. Decontamination of pit, tank, ete.» (a) Before a worker enters
a tank, pit, kettle or any other confined space which contained a nitro or
amino compound, it shall be thoroughly washed and decontaminated.
(b) No part of the plant which has contained a nitro or amino
compound shall be repaired or opened for repairs unless it has emptied
of such compound, thoroughly cleaned and decontaminated.
(c) Records of such treatment shall be maintained in a register
approved by the Chief Inspector and the register shall be made available
for inspection when required by an Inspector,
12. Manual handling. •• A nitro or amino compound shall not be
required or allowed to be mixed, filled, emptied or handled except by
means of a scoop with a handle which shall be thoroughly cleaned daily.
13. Jl.>rotective wear.·· The occupier shall provide, maintain clean
and in good repair protective clothing and other equipments as specified
in the table below : --
TAMILNADU FACTORIES RULES, 1950
'll.'.HE TABLE
[R.95
Protective clothing and
other equipment
(a) Long pants and shirts or overalls
with long sleeves and head cover
ings. The shirt or overalls shall
cover the neck completely.
(b) Rubber gloves, rubber gum boots,
rubber aprons and air line
respirator.
(c) White clean clothing mentioned in
(a) above, in addition to white
clean shirts, singlet and protective
equipment as in (b) above.
(d) White long sleeved aprons.
14. Instructions as regards risks. •• Every worker on his first
employment shall be fully instructed on the properties of the chemical he
has to handle and of the dangers involved. Workers shall also be in
structed in the measures to be taken to deal with any emergency.
1[15. Medical facilities and records of examinations and tests • •• ( 1)
T4e occupier of every factory to which the schedule applies, shall --
{a) employ a qualified Medical Practitioner for medical sur
veillance of the workers employed therein whose employment shall be
subject to the approval of the Chief Inspector of Factories ; and
(b) provide to the said Medical Practitioner all the necessary
facilities for the purpose referred to in clause (a).
(2) The record of medical examinations and appropriate tests
carried out by the said medical practitioner shall be maintained in a
separate register approved by the Chief Inspector of Factories, which
shall be kept readily available for inspection by the Inspector.
16. Medical Exam!nation by the Certifying Surgeon • •• (1) Every
worker employed in the said processes shall be examined by a Certifying
1 Subs. vide G.O. Ms. No. 2223, L & E, dated the 6th October, 1988.
Process
For manipulation of com
pounds mentioned in Ap
pendix: B.
For manipulation of com
pounds mentioned in Ap
pendices A and B:
\
Surgeon within 15 days of his first employment. Such examination shall
include tests for detection of rnethemoglobin in blood (Heamatological
tests), paranitrophenol in urine, Pulmonary function tests and �.N.S.
tests. No worker shall be allowed to work after 15 days of his first
employment in the factory unless certified fit for such employment by the
Certifying Surgeon.
(2) Every worker employed in the said processes shall be re-ex
amined by a Certifying Surgeon at least once in every six calendar months
and such re-examinations shall, wherever the Certifying Surgeon con
siders appropriate, include all the tests specified in sub-paragraph (1).
(3) The Certifying Surgeon after examining a worker, shall issue
a certificate of fitness in Form 27. The record of examination and re
examinations carried out shall be entered in the Certificate and the
Certificate shall be kept in the custody of the Manager of the Factory.
The record of each examination carried out under sub- paragraphs (1)
and (2), including the nature and.the results of these tests; shall also be
entered by the Certifying Surgeon in a Hea:iih.Register in Form 17 .
.. - . -
( 4) The certificate of fitness and the health register shall be kept
readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a
worker is no longer fit for employment in the said processes on the ground
that continuance therein would involve special danger to the health of the
worker, he shall make a record of his findings in the said certificate and
the Health Register. The entry of his findings in these documents should
also include the period for which he considers that the said person is unfit
to work in the said processes. The person so suspended from the process,
shall be provided with alternate placement facilities unless he is fully
incapacitated in the opinion of the Certifying Surgeon, in which case the
person affected shall be suitably rehabilitated.
(6) No person who has been found unfit to work as said in
sub-paragraph (5) shall be re-employed or permitted to work in the said
process unless the Certifying Surgeon, after further examination, again
certifies him fit for employment in those processes.]
17. Washing and bathing facilities. •• ( 1) The following washing and
bathing facilities shall be provided and maintained in cleanly state and in •
R.95] TAMILNADU FACTORIES RULES, 1950
[R.95
good repair for the use of all persons employed in the said manufacturing
process: --
(a) A wash place under cover with clean towels, soap and nail
brushes and with atleast one stand- pipe for every five such persons having
'constant supply of water.
(b ),Fifty per cent. of the stand-pipes provided under item (a)
above shall be located in bathroom where both hot and cold water shall
be made available during the working hours of the factory and for one
hour thereafter.
(c) The washing and bathing facilities shall be within a radius
of 15 metres from the area housing the said manufacturing process.
(d) Clean towels shall be provided individually to each worker
if so ordered by an Inspector.
(e) In addition to taps mentioned under item (a), one stand
pipe in which warm water made available shall be provided on each floor.
(2) Arrangement shall be made to wash factory uniforms clothes
compulsorily every day.
18. Washing and bathing. -- (a) All workers employed in the said
manufacturing process shall carefully wash their hands and face before
partaking of food or leaving the factory.
(b) Bath Register. -- Workers employed in the said manufacturing
process shall take a bath daily at the factory premises and enter their
names in the bath register in token of having done so.
19. lFood, drinks, ete., prohibited in workroom. -- No worker shall
consume food, drink, pan, supari or tobacco or shall smoke in any
workroom in which the said manufacturing process is carried on and no
worker shall remain in any such room during intervals for meals or rest.
20. Cloak-room. --There shall be provided and maintained in a clean
• state and in good repair for the use of the persons employed in the said
manufacturing process ( a) a cloak-room with lockers having two com pare
ments, one for street clothes and the other for factory clothes and (b) a
place separate from the locker room and from the mess-room for the
storage of protective equipment provided under paragraph 13. The
accommodation so provided shall be under the care of a responsible
person and shall be kept clean.
TAMIL NADU FACTORIES RULES, 1950
R.95] TAMIL NADU FACTORIES RULES, 1950
21. Mess-room • • • There shall be provided and maintained for use
of all persons employed in the factory and remaining in the premises
during the meal intervals, a mess-room which shall be furnished with (a)
tables and benches, and (b) means for warming food.
The mess-room shall be placed under the charge of a responsible
person and shall be kept clean.
22. 1'ime allowed for washing. •• Before each meal and before the
end of the day's work at least ten minutes in addition to the regular
intervals shall be allowed for washing to each person who has been
employed in the said manufacturing process.
23. Drying stoves. -- (1) Every drying stove shall be efficiently
ventilated to the outside air in such a manner that hot air from the stove
shall not be drawn into any workroom.
(2) No person shall enter stove to remove the contents until a free
current of air has been passed through it by mechanical means.
24. Non-sparking tools. -- Non-sparking tools shall be provided for
the purpose of cleaning or repairing machinery or operating any process
where vapours of betanaphthylamine are evolved.
25. Testing of atmosphere, etc. -- Aminos in the atmosphere of the
workroom where the manufacturing process is carried on shall be es
timated once every week and records of results of such estimations shall
be made ayailable when required by an Inspector.
lPART Kl
26. Separation of processes. •• The said manufacturing process B
shall be carried on in rooms which shall not communicate with any other
room except through a passage open entirely to outside atmosphere.
27. Limitation of exposure. -- (1) No worker under the age of 40years
shall be engaged in the factory for the said manufacturing process B for
the first time after the date on which these rules come into force.
(2) Before the end of the day's work at least one hour shall be
allowed for bathing to each person, who is employed in the said manufac
turing process B including the time allowed under paragraph 19.
28. Exemption. •• If in respect of any factory the Chief Inspector is
satisfied that ( owing to the exceptional circumstances or infrequency of
TAMIL NADU FACTORIES RULES, 1950 [R.95
the process or for any other reason) all or any of the provisions of this
Schedule are not necessary for the protection of persons employed in the
factory, he may by certificate in writing, exempt such factory from all or
any of such provisions subject to such conditions as he may specify
therein. Such certificates m!ly =. any time be revoked by the Chief
Inspector. •. ·
• APl'ENDIX t[A]
(See par;g�aphs 2, 10, 13 and 15)
The benzenes, toluenes, xylenes, having undergone nitration once or
several times (nitro, dinitro and lrinitro benzene and its homologues) and
their chlorinated compounds, naphthalenes, having undergone nitration
once or several times, aniline, and its homologues (toludine, xylidine,
cumidine) anisdine, phenetidine and their chlorinated, nitrated and
alkeylatcd compounds (demethylenillin toluylendiamine, toludine,
phynylhydrazine, toluylhydrazin).
APPENDIX t [B]
(See paragraphs 2, 13, 15, 25 and 26)
Alphanaphthylamine.
Betanaphthylamine.
Henozidine and its salts
Dianisidine.
Tolidine.
Dichlorobenzidine.
APPENDIX t[C]
(See paragraph 3)
Cautionary placard
Advice to workers :
(1) Nitro and amino compounds or aromatic hydrocarbons are
dangerous. In this factory you have to handle them frequently.
(2) All items of protective wear provided should be made use of
to safeguard your health.
1 Re-lettered by G.O. Ms. No. 1278, Labour, dated the 13th June, 1984.
R. 95] TAMIL NADU FACTORJES RULES, 1950 473
(3) Maintain scrupulous cleanliness at all times. Before meal, wash
hands and feet. A both before leaving the factory‘is essential taking mm to
wash the head well
(4) If any chemical falls on your body, wash it at? immediately will:
soap and water, change clothing at once, if soaked with a cyanon'c nino or
amino compound. Contact the appointed doctor inmiediately.
(5) Do not handle any nitro or amino compound with bare hands.
Use a lung handled scoop.
(6) Avoid alcoholic drinks as these increase risk ofpoisoning.
(I) In case of illness contact the Factory Manager and the
appointed doctor.
(8) Do not chew, eat, drink or smoke in the workroom or with soiled
hands. Keep food_and drink away from the workplace.
-v (9) If you work with Betanaphtbylamine or benzidine or its salts,
alphanaphthylamine or dianisidine —
(a) remember the serious effecs will follow artist a number of
years if great care is nor taken to observe absolute cleanliness of body,
clothes, machinery and tools ;
(b) at mealtime, wash face and hands twice with soap and water
to remove all chemicals ; wear a long-sleeved clean apron while eating ;
(c) before leaving the factory take a bath using soap and water
twice ; afler this put on your home clothes.
’[SCHEDULE XXII]
‘lPrucesr of Extracting 01/5 and Fats in
Solvent Extraction Plants]
1. Definitions. — (a)
”
Competent Person
”
for the purpose of this
Schedule shall he at least a member or an Associate Member of the Institution
of Engineers (India) with ten years experience in a responsible position as
may be approved by the Chief Inspector :
‘ Added by G0. Ms. No. 680, Labour and Employment. dated the 20th lulyY
1976.
1 The heading
“
Process of Extracting Oils and F315 from Vegmable and Animal
Sources in Solvent Extraction Plants
"
subsimted by 00. Ms, ND. 127, Labour
and Employment (M-Z). dated the 3 is! August, 2005.
Provided that a Graduate in Mechanical Engineering or Chemical
Technology with specialised knowledge of Oils and Fats and with a minimum
experience of live years in a solvent extraction plant shall also be considered
to be a competent person :
Provided further that the State Government may accept any other
qualifications, if in its opinion, they are equivalent to the qualifications
aforesaid;
(b) " Flame-proof enclosure " as applied to electrical machinery
or apparatus means an enclosure that will withstand, when covers or other
access doors are properly secured, an internal explosion of the inflammable
gas or vapour which may enter or which may originate inside the enclosure
without suffering damage and without communicating the internal
inflammation ( or explosion) to the external flammable gas or vapour.
(c) " Solvent" means an inflammable liquid such as Pentane
and Hexane and Heptane used for the extraction of vegetable oils;
(d) " Solvent Extraction Plant ", means a plant in which the
process of extracting oils and fats 1[***] by the use of solvents is carried
on.
2. Location and lay out. - (a) No solvent extraction plant shall be
permitted to be constructed or extended within a distance of thirty metres
from the nearest residential locality.
(b) A continuous wire fencing shal1 be provided around the solvent
extraction plant up to a minimum distance of 15 metres from the plant and
the fencing so provided shall be not less than 1 .5 metres in height.
(c) No person shall be allowed to carry any matches or an open
flame or fire inside the area bound by the fencing.
(d) Boiler houses and other buildings where open flame processes
are carried on shall be located at least thirty metres away from the solvent
extraction plant.
(e) If godowns and preparatory processes are within a distance of
thirty metres from the solvent extraction plant, these shall be at least
fifteen metres distance from the plant, and a continuous barrier wall of
non-combustible material of a height of 1.5 metres from ground level shal1
be erected at a distance of not less than fifteen metres from the solvent
• 1' The words " from vegetables and animal sources ·• omitted by GO Ms. No.
127, Labour and Employment (M-2), dated the 31st August, 2005.
TAMIL NADU FACTORIES RULES, 1950 [R.95
R.95] TAMIL NADU FACTORIES RULES, 1950
extraction plant so that it extends to at least thirty metres of vapour travel
around its ends from the plant to the possible sources of ignition.
3. Electrical lnstallat�n. -- (a) All electrical motors, electrical
wiring system, the electric lamps, switches, circuit breakers and all other
electrical equipment used within the premises of a factory where extrac
tion of oil is being carried on with the help of solvents shall be of flame
proof construction and should be suitable for use in areas where Hexane
or similar types of solvents or vapours are likely to exist.
(b) All metal parts of the plant and building including various
tanks and containers where solvents are stored or are likely to be present
and all parts of electrical equipments not required to be energised shall
be properly connected to earth so as to avoid accidental rise in the
electrical potential of such parts above the earth potential.
4. Restriction on smokings. -- Smoking shall be strictly prohibited
within a distance of 15 metres from the solvent extraction plant. For this
purpose 'No Smoking' signs shall be permanently displayed in the area.
S. Precautions against friction. -- (a) All tools and equipment
including ladders, chains and other lifting tackle required to be used in
the solvent extraction plant shall be of non-sparking type ;
t[(b) No machinery or equipment in any solvent extraction plant
shall be belt driven unless the belt used is of such a type that it does not
permit accumulation of static electricity to a dangerous level ;]
1 Subs. by G.O. Ms. No. 1523, Labour and Employment, dated the 10th July, 198
(c) No person shall be allowed to enter and work in the solvent
extraction plant wearing clothes made of nylon or such other fibre that
can generate static electrical charge or wear footwear which is likely
to cause sparks by friction.
6. Fire-fighting apparatus.» (a) An adequate number of portable
fire extinguishers suitable for use against flammable liquid fire shall be
provided in the solvent extraction plant ;
(b) An automatic water spray sprinkler system on a wet pipe or
open head deluge system with a sufficient supply of storage water
shall be provided over the solvent extraction plant and throughout
the building housing such plant.
TAMILNADU FACTORIES RULES, 1950 [R.95
7. Precautions against power failure.·· Provision shall be made for
the automatic cutting off of steam in the event of power failure and also
for emergency overhead water supply for feeding water by gravity lo
condensers which shall come into play automatically upon a power
failure.
r- 8. Magnetic separators. •• Oil-cake shall be fed to the extractor by
a conveyor through a hopper and a magnetic separator shall be provided
to remove any piece-of iron during its transfer.
9. Venting.·· (a) Tanks containing solvents shall be protected with
emergency venting to relieve excessive internal pressure in the event of
fire.
(b) All emergency relief vents shall terminate at least six metres
above the ground and be so located that the vapours will not re-enter the
building in which the solvent extraction plant is located.
10. Waste-water.·· Process waste waler shall be passed through a
flash evaporator to remove any solvent before it is discharged into a sump
which should be located within the fenced area but should not be closer
than eight metres to the fence.
11. Ventilation.·· The solvenfextraction plant shall be well ventilated
and if the plant is housed in a building, the building shall be provided with
mechanical ventilation with provision for at least six air changes per hour.
12. House-keeping. •• (a) Solvent shall not be stored in an area
covered by the solvent extraction plant except in small quantities which
shall be stored in approved safety cans ;
(b) Waste materials such as oily rags, other wastes and absorbents
used to wipe off solvent and paints and oils shall be deposited in approved
containers and removed from the premises at least once a day ;
(c) Space with the solvent extraction plant and within 15 metres
from the plant shall be kept free from any combustible materials and any
spills of oils or solvent shall be cleaned up immediately.
13. Examination and repalrs,» (a) The solvent extraction plant shall
be examined by the competent person to determine any weakness or
corrosion and wear once in every 12 months. Report of such examination
shall be supplied to the Inspector with his observation as to whether or
not the plant is in safe condition to work .
(b) No repairs shall be carried out to the machinery or plant
except under the direct supervision of the competent person.
(c) Facility shall be provided for purging the plant with inert gas
i[or steam] before opening for cleaning or repairs and before introducing
solvent after repairs.
14. Operating personnel. •• The operation of the plant and
machinery in the solvent extraction plant shall be in the charge of such
duly qualified and trained persons as are certified by the competent
person to be fit for the purpose and no other person shall be allowed to
operate the plant and machinery.
15. Employment of women and young persons. •• No woman or
young person shall be employed in the solvent extraction plant.
16. Vapour detection.·· A suitable type of flame- proof and portable
combustible gas indicator shall be provided and maintained in good
working order and a schedule of routine sampling of atmosphere at
various locations as approved by the Chief Inspector shall be drawn out
and entered in a register maintained for the purpose.
2[17. Exemption. •• If in respect of any factory, the Chief Inspector
is satisfied that owing to the exceptional circumstances or infrequency of
the processes or for any other reasons, all or any of the provisions of this
Schedule are not necessary for the 3fprotection and welfare of workers]
in the factory, the Chieflnspector may by a certificate in writing (which
he may in his discretion revoke at any time) exempt such factory from all
.or any of such provisions subject to such conditions, if any, as he may
specify therein.
1
Ins by G.O. Ms. No 572, Labour, dated the 18th March, 1985.
2 Ins by G.O.Ms. No. 1523, Labour and Employment, dated the 10th July, 1980
3 Subs. by G.O. Ms. No. 3310, Labour, dated 'the 28th December, 1983.
R.95] TAMILNADU FACTORIES RULES, 1950
Schedule XXJIV
Fire Works Manufactories and Match Factories
I. Application. -1he provisions of this Schedule shall apply to all
manufactories and processes incidental thereto carried on in any Fire
Works Manufactory or a match works and shall be in addition to and
not in derogation of any provisions of the Factories Act, 1948 and the
Tamil Nadu Factories Rules, 1950 or of any other Act or Rules that
are applicable to fire works manufactories and match factories.
2. Definition. - (a) "Fire Works Manufactory " means any factory
or such parts of any factory wherein the following chemicals or
combination of chemicals and materials are being used for the manufacture
or crackers, sparklers, caps, fuses, blasting powder and fire works -
Saltpetre;
Barium Nitrate ;
Potassium chloride ;
Gum;
Strontium Nitrate ;
Copper Coated Wires ;
G.I. Wire;
Pyrotechnic aluminium Powder ;
Charcoal;
Red Phosphorus ;
Dextrine;
Magnesium Powder ;
Steel filings or iron filings ;
Gun Powder (Black Powder) ;
(b) " Match works " means any establishment which manufactures
safety matches or colour matches by the use of chemicals mentioned in
clause (a).
( c) " Breathing apparatus " means a device covering mouth or
nose with necessary connections by means of which a person using it in a
poisonous asphyxiating or irritant atmosphere breathes ordinary air or any
other suitable apparatus approved in writing by the Chief Inspector in this
behalf.
3. Buildings. - (a) The building of any fire works manufactory or
match factory shall conform to the standards prescribed under the Indian
Explosives Act, 1884 (Central Act IV of 1884), and the height of such
buildings shall at no time be less than 3 metres ;
(b) No building inside a fire works manufactory shall have a first
floor at any time ;
THE TAMIL NADU FACTORIES RULES, 1950 [R.95
I '
( c) In Match works, provided with a first floor, there shall be 2
staircases leading from the first floor to the ground floor irrespective of
the number of persons employed in the first floor and one of the staircases
shall be of masonry construction or of non-inflammable materials ;
( d) All doors shall open outwards and all the doorways shall be
kept free from obstructions ;
( e) All doors of workrooms shall not be less than 1.2 metres in
width or less than 2 metres in height ;
1 [ ( f) The floors of all work 1 ooms including mixing sheds shall be
completely covered by a rubber sheet having a smooth surface and having
a thickness of atleast 3 mm. If the floor cannot be covered by a single
rubber sheet, more than one rubber sheet may be used, so that each sheet
is overlapped by the other atleast 150 mm.; and]
2[{g) Mixing sheds in a fire works manufactory shall be at a
distance of 18 metres away from all other sheds if the quantity of
chemical stored, handled or used in the mixing shed is less than 50
kilograms and be separated by baffle walls opposite to each exit of the
mixing shed :
Provided that the distance shall be atleast 21 metres, if the quantity
of chemical stored, handled or used in the mixing shed exceeds 50
kilograms.].
4. House-keeping. - (a), Every part of ways, works, machinery
and plant shall be maintained in a clean and tidy condition ;
(b) Any spillage of materials shall be cleaned without delay ;
( c) Close platforms, passages and gangways shall be kept free of
temporary obstructions.
5. Electrical Equipment. - (a) If at any time, use of electricity is
allowed in the factory, all leads, etc., shall be in conduits with flame-proof
junctions;
(b) Electrical supply shall never be through a lamp even with a
non-conducting handle.
1 Subs. by GO. Ms. No., 2742, Labour, dated the 27th December, 1984.
2 Subs. by GO. Ms. No., 28, Labour and.Employment (M-2), dated the 18th
March, 1997 { with effect from 2nd April, 1997).
R.95] THE TAMIL NADU FACTORIES RULES, 1950
5. Protective clotl,ing. - (a) Under no circumstances clothes made
of artificial fibre like terelene, etc., be allowed inside the factory;
(b) All workers shall be supplied with asbestos aprons especially
to cover the chest, gonads and thighs ;
( c) Breathing apparatus shall be used in mixing sheds to avoid
workers inhaling poisonous fumes in the event of an untoward reaction.
( d) In mixing sheds where aluminium and magnesium powders are
used " anti-stat" foot-wear to combat static electricity shall be supplied.
( e) All protective equipments shall be maintained in an efficient
condition and also shall be maintained in a clean and hygienic condition.
7. Matclt Factories. - In match factories -
(i) the residue of the head composition shall not in any way be
mixed with the residue of the friction composition;
(ii) the rooms comprising the two mixing departments, namely,
(a) head composition and (b) friction composition shall be entirely
separated from each other and the drains from these two departments
shall be kept entirely separate ;
(iii) rubbish containing the residues of the head composition
and friction composition shall be kept and burnt separately ;
(iv) department in which completed matches (matches with
heads on) are stored shall be separated from all other departments by
means of fire-proof walls and doors providing adequate means of escape
in case of fire :
Provided that the Chief Inspector may, subject to such conditions,
as he may deem necessary, exempt any factory in existence on the first
January 1935, from the provisions of this clause ;
(v) Splints, veneers and other materials in excess of the quantity
required for the day's manufacture shall be kept in separate rooms of
the factory where no manufacturing process is carried on. No manu
factured material shall be stored anywhere in the factory compound
for more than five days after the manufacture except in the storage
godowns:
Provided that nothing contained in this clause shall apply to splints
and veneers in cases stored in peeling and box making departments ;
THE TAMIL NADU FACTORIES RULES, 1950 [R.95
(vi) Store room for matches shall be entirely separated by fire
oofwalls h-om the buildings used for manufacture; 1[* * *]
2[(vii) The racks in the dipped splints room shall have sides, top and
e rear part provided with non-inflammable materials.]
3((viii) The process of packing shall be done in an area away from
e place of manufacture to the satisfaction of the Inspector; and
(ix) No child shall be employed or permitted to work 4[in any
ocess] directly connected with the manufacturing process upto final
eduction of match sticks.]
8. Precautions to be taken in connection with manufacture of
ses used in crackers, etc. - (a) Bundles of fuses shall be handled by
rrying and not dragging them on the floor ;
(b) Drying of fuses after wrapping shall be carried out on
atforms away from workrooms ;
( c) Cutting shall be done by experienced workers employed oniy
,r this purpose and under proper supervision ;
(d) Cutting shall be done on a large masonry platform covered
ith a tarpaulin and kept free from grit and pebbles ;
( e) Cutting shall be done on a raised platform so that workers
m work standing. Cutting must be done by placing the fuse on wooden
eepers kept over blocks of wood. Brick shall not be used beneath the
ooden reapers ; and
(f) Workers, while on dangerous operations, shall not wear
othing sewn with ferrous or steel buttons, buckles or attachments. They
iall not carry on their persons, iron knives, keys, etc.
5(9. Employment of women and clzildren.-Women workers and
oung persons shall not be employed on operation where chemicals are
.ixed and where fuses are cut. Children shall not be employed or permitted
, work in the manufacturing process or any work or operation or process
mnected therewith or incidental thereto in fireworks manufactory.]
I The word ·• and " omitted by G.0. Ms. No. 24, Labour and Employment
i[-2), 12th February 1993.
2 Subs. by GO.Ms. No. 2457, Labour, dated the 22nd November, I 985.
3 Ins. by GO. Ms. No. 24, Lab. and Emp. (M-2), dated the 12th February 1993.
4 Ins. by GO. Ms. No. 16, Labour and Employment, dated the Jrd March, 1997.
5Subs by GO. Ms. No. 2<1, Lab. and Emp. (M-2). dated the 12th February 1993
R95] THE TAMIL NADU FACTORIES RULES, 1950
JO. General. -(a) No person other than a factory worker and/or
an inspecting officer or others connected with the manufacturing process
shall be allowed to enter the working area ;
(b) Cardboard containers and trays without steel nails shall be
used for storage and day-to-day working purposes.
(c) During the manufacture of fuses only brass or non-ferrous
knives shall be used and drying of fuses shall be away from all workrooms.
( d) Door mats shall be provided outside the workroom and near
all drying platforms and where fuses are cut for the workers to clean their
feet.
( e) At no time, mixing materials shall exceed the quantity that is
required for the manufacture of mixing for half an hour operation only.
2{(f) For filling up chemicals in the inner tubs of crackers,
only aluminium or plastic rings shall be used and not galvanised iron rings.
(g) Buckets, containers, hoops, locks, nails, screws, bolts, nuts,
knives, scissors, 2(hinges, latches.] etc., made up of iron shall not be used
within the factory premises.
(h) Wooden racks without iron nails shall be used for drying
paper cap sheets, in amorcess factories.
(i) Wooden racks used for drying paper cap sheets shall be
provided with asbestos or other fire resistant sheets on the three sides
leaving the front side open.
G) Dried paper cap sheets shall be carried in wooden trays with
four compartments (partitions) each compartment (partition) carrying a
single sheet.
(k) Each manufacturing shed of a fire works shall have atleast two
doors facing each other. The doors provided to the worksheds of adjacent
rows shall not face each other.
(1) Not more than four persons shall be employed or allowed a1
any one time in any one building in which explosive is being manufactured.
3[(m) Copper plates shall be fixed on the baffle wall of the chemica
mixing shed and chemical filling shed ; and the workers before enterin:
1 Ins. by GO. Ms No. 2742, Labour, dated the 27th December, 1984.
2 Ins. by GO. Ms. No. 127, Lab. and Emp. (M-2), dated the 31st August, 2005.
3 Added by GO. Ms. No. 70, Lab. and Emp. (M-2), dated the 26th August, 2011.
THE TAMIL NADU FACTORIES RULES, 1950 [R.95
R.95]
.. ,,
those sheds, shall place their hands on the copper plates in order to
discharge the electrostatic charges from their body and to protect them
from any untoward fire or explosion.
(n) Workers aged above 55 years shall be employed only in non
explosive areas.
( o) No person, aged 50 years and above shall be employed in
Fireworks Manufactory unless his eyesight including colour vision and his
hearing capacity are examined and declared fit by a qualified
ophthalmologist and ENT specialist, respectively, to work whether with or
without use of corrective appliances. Such examinations shall be made
atleast once in every two years. Record of examination or re-examination
carried out shall be produced on demand to Inspectors at the time
inspection. '
(p) Work benches and tables shall be provided for mixing and
filling operations.
( q) Blast walls shall be provided around the drying platform at a
distance of2 metres away from the drying platform. The height of the blast
wall shall be atleast one foot more than that of the height of the drying
platform.
(r) In every Fireworks Factory, there shall be appointed a
Supervisor with minimum qualification of B.Sc. (Chemistry) or Diploma
in Chemical Engineering or its equivalent. He shall be fully conversant with
the process of manufacture of fireworks and the associated hazards. These
Supervisors shall undergo special training of fireworks safety as approved
by the Chieflnspector of Factories. Number of Supervisors shall be at the
rate of 1 for every 50 workers. Manufacture of fireworks shall be carried
out under the supervision of such Supervisors.
(s) Factories which make fancy crackers shall have,
(i) separate colour pellet machine shed ;
(ii) separate colour pellet drying shed ; and
(iii) separate transit room for storing colour pellets.
(t) Not more than one manufacturing activity of any one item of
crackers shall be allowed or required to be done in any working shed at a
time.
(u) The workers involved in mixing and filling operations shall
have an education qualification of atleast Higher Secondary Course.
THE TAMIL NADU FA'.'CTORIES RULES, 1950 ·
433-1 THE TAMIL NADU FACTORIES RULES, 1950 [11.95
(v) The drying platform meant for Rockets and Fire Works of
flying nature shall be provided with atemporary roofofa strong aluminium
mesh cover resting on the baffle walls, for protection fiom direct sunlight.
(w) There shall be provided atleast two burning pits in every
factory and each burning pit shall be at a minimum distance of 62 metres
away from the working sheds.
(x) The collected Waste shall be disposed in the burning pit after
the working hours of the factory on the same day in the presence of the
Foreman by attained workcn
(y) Wind direction indicator shall he provided in each
factory.
(Z) No electronic appliances such as mobile phones, transistors
etc” shall he allowed in the premises, where fireworks are manufactured,
handled, stored or used.
(an) The mixed chemicals shall be used on the same day. No mixed
chemical (fireworks) composition, dry or wet shall be kept in the factory
at the close of any working day. Such residual composition shall be safely
destroyed at the close ofthe day.
(ab) Fireworks factory ordinarily employing 250 workers or more
shall appoint a qualified Safety Officer as per the Tamil Nadu Safety
Officer (Duties, Responsibilities and Conditions of Service) Rules, 2005
at the rate of one Safety Officer for 250 workers,
(ac) No manufacturing activity shall be carried on in Fireworks
factory between 600 pm, and 6.00 am].
11. Display of notices. — The following notices in the local
language understood by the majority of workers shall be displayed at a
conspicuous place in the factory.
(a) Smoking is strictly prohibited.
(b) No one shall carry matches or other igniting materials into
the factory.
(c) No worker shall be in a workroom or area where no work has
been assigned to him.
(d) If anything untoward happens in any shed all workers shall
dash to\t11e gates which serve as outgates of the factory and in no
circumstances be curious to see what has happened in the affected shed.
(e) Any spillage ofmaterials should be cleaned without any delay
(f) Wearing of clothes made of artificial fibre like terene, terelene,
etc., is prohibited. Clothings sewn with ferrous or steel buttons or buckles
or attachments should not be worn.
(g) Footwears with iron nails should not be used.
(h) Workers should not carry with themselves iron knives and iron
keys, etc.
12. First-aid boxes. - (a) The materials required under rule 65
shall be kept in the First-Aid Box. In addition, four stretchers shall be
available for every twenty persons employed in the premises.
(b) Adequate amount of burn dressings and 24 ounces of coconut
oil to be used as the first remedy for bums shall be kept in the First-Aid
Box.
(c) Persons who are in charge of First-Aid Boxes shall be those
who possess the certificate granted by the St. John's Ambulance
Association for rendering first-aid.
1[12-A. Personal Accident Insurance. - The occupier of every
factory wherein the manufacture of match or fire work is carried on shall
prepare a report containing the details of the insurance coverage in respect
of the workers employed, in such factory in Form No. 41 and send it to the
Chief Inspector once in six months through the Deputy Chief Inspector of
Factories having jurisdiction over the area where the factory is situated.]
2[12-B. Medical Examination by Certifying Surgeon.- (1)
Every worker employed in the process of mixing, filling and handling of
chemicals in the fireworks factories shall be medically examined by a
Certifying Surgeon within fifteen days of his first employment. Such
medical examination shall include skin test for Dermatitis, Pulmonary
Function Test and Chest X-ray. No worker shall be allowed to work after
fifteen days of his first employment in the factory unless certified fit for
such employment by the Certifying Surgeon.
(2) Every worker employed in the said process shall be re-examined
by a Certifying Surgeon at least once in every six months. Such re-
examination shall, wherever the Certifying Surgeon considers appropriate,
include all the tests specified in sub-paragraph (1) except Chest X-ray
which will be done once in three years.
_________________________________________________________
1Ins. by G.O. Ms.No.130, Labour & Employment(M-2), dated the 11th September,
2012.
2Ins. by G.O. Ms.No.62, Labour & Employment(M-2), dated the 25th May, 2018.
(3) The Certifying Surgeon after examining a worker shall issue a
Certificate of Fitness in Form No. 27. The record of re-examination carried
out shall be entered in the certificate and the certificate shall be kept in the
custody of the manager of the factory. The record of each examination
carried out under sub-paragraphs (1) and (2), including the nature and the
results of the tests, shall also be entered by the Certifying Surgeon in a
Health Register in Form No. 17
(4) The Certificate of Fitness and the Health Register shall be kept
readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a
worker is no longer fit for employment in the said processes on the ground
that continuance therein would involve special danger to the health of the
worker, he shall make a record of his findings in those documents and
should also include the period for which he considers that the said person
is unfit for work in the said processes. The person so suspended from the
process shall be provided with alternate placement facilities unless he is
fully incapacitated in the opinion of the Certifying Surgeon, in which case
the person affected shall be suitably rehabilitated.
(6) No person who has been found unfit to work as said in sub-
paragraph (5) above, shall be re-employed or permitted to work in the said
processes unless the Certifying Surgeon, after further examination, again
certifies him fit for employment in those processes.]
13.Exemption - If the Chief Inspector is satisfied in respect of any
factory or any process that, owing to the special conditions or special
methods of work or by reason of the frequency of the process or for other
reason the application of all or any of the provisions of the schedule to the
factory or process, or for the persons employed in such factory or process
is not necessary, he may by order in writing exempt such factory or part of
the factory or process or any part of the factory or person from all or any of
these provisions subject to such conditions as he may deem expedient to
ensure safety and health of the workers.
The Chief Inspector may at any time in his discretion revoke such order
without assigning any reason.
TAMILNADU FACTORIES RULES, 1950
SCHEDULE XXV
[R.95
Manufacture or manipulation of manganese and its compounds
1. Definitions. -· For the purpose of this Schedule, --
(a) "Manganese Process" means processing, manufacture or
manipulation of manganese or any compound of manganese or any ore
or any mixture containing manganese.
(b) "First employment" means first employment in any man
ganese process and includes also re- employment in any manganese
process following any cessation of employment for a continuous period
exceeding 3 calendar months ;
J
/
(c) "Manipulation" means mixing, blending, filling, emptying,
grinding, sieving, drying, packing, sweeping or otherwise handling of
manganese or a compound of manganese or any mixure containing
manganese;
(d) '�fficient exhaust ventilation" means localized ventilation
effected by mechanical means for the removal of dust or fume or mist at
its source of origin so as to prevent it from escaping into the atmosphere
of any place where any work is carried on. No draught shall be deemed
to be efficient which fails to remove the dust or fume or mist at the point
where it is generated and fails to prevent it from escaping into and
spreading into the atmosphere of a work place.
- 2. Application. --The Schedule shall apply to every factory in which
or in any part of which any mang,anese process is carried on.
3. Exemption. •• If in respect of any factory, the Chief Inspector is
satisfied that owing to any exceptional circumstances, or infrequency of
the process, or for any other reason, application of all or any of the
provisions of this Schedule is not necessary for the protection of the
persons employed in such factory he may, by an order in writing which he
may at this discretion revoke, exempt such factory from all or any of the
provisions on such conditions and for such period as he may specify in
the said order.
R.95]
4. Isolation of a precess;-- Every manganese process which may give
rise to dust, vapour or mist containing manganese-shall be carried on in
a totally enclosed system or otherwise effectively isolated from other
processes so that other plants and process and other parts of the factory
and persons employed on other work or process may not be affected by
the same.
5. Ventilation of process.·· No process in which any dust, vapour or
mist containing manganese is generated, shall be carried out except under
an efficient exhaust ventilation which shall be applied as near to the point
of generation as practicable.
1(6. Medical facilities and records of examinations and tests . •• (1)
The occupier of every factory to which the schedule applies, shall --
(a) employ a qualified medical practitioner for medical surveil
lance of the workers employed therein whose employment shall be
subject to the approval of the Chief Inspector of Factories ; and
(b) provide to the said medical practitioner all the necessary
facilities for the purpose referred to in clause (a).
(2) The record of medical examinations and appropriate tests
carried out by the said medical practitioner shall be maintained in a
sep�ate register approved by the Chief Inspector of Factories, which
shall be kept readily available for inspection by the Inspector.]
7. Medical Examination by Certifying Surgeon.» -(1) Every worker
employed in any manganese processes shall be examined by a Certifying
Surgeon within 15 days of his first employment. Such examination shall
include tests for detection of serum calcium, serum phosphate and
manganese in blood and urine and also include steadiness tests and other
neuromuscular co-ordination tests. No worker shall be allowed to work
after 15 days of his first employment in the factory unless certified fit for
such employment by the Certifying Surgeon.
(2) Every worker employed in a manganese process shall be
re-examined by a Certifying Surgeon at least once in every three calendar
months and such examinations shall, wherever the Certifying Surgeon
considers appropriate, include all the tests in sub-paragraph (1).
(3) The Certifying Surgeon after examining a worker shall issue
a certificate of fitness in Form 27. The record of examination and re
examinations carried out shall be entered in the Certificate and the
1
Subs. byG.O. Ms. No. 2223, L & E, dated the 6th October, 1988
'
TAMIL NADU FACTORIES RULES,
TAMIL NADU FACTORIES RULES, 1950 [R.95
Certificate shall be kept in the custody of the Manager of the Factory.
The record of each examination carried out under sub- paragraphs (1)
and (2), including the nature and the results of these tests, shall also be
entered by the Certifying Surgeon in a Health Register in Form 17.
· ( 4) The certificate of fitness and the health register shall be kept
readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that the
worker is no longer fit for employment in the said processes on the ground
that continuance therein would involve special danger to the health of the
worker, he shall make a record of his fmdings in the said certificate and
the Health Register. The entry of his findings in those documents should
also include the period for which he considers that the said person is unfit
to work in the said processes. The person so suspended from the process,
shall be provided with alternate placement facilities unless he is fully
incapacitated in the opinion of the Certifying Surgeon, in which case the
person affected shall be suitably rehabilitated.
(6) No person who has been found unfit to work as said in
sub-paragraph (5) shall be re-employed or permitted to work in the said
process unless the Certifying Surgeon, after further examination, again
certifies him fit for employment in those processes.]
8. Personal Protective Equlpment.s- (1) The Occupier of the factory
shall provide and maintain in good and clean condition suitable overalls
and head coverings for all persons employed in any manganese process
and such overalls and head coverings shall be worn by the persons while
working on a manganese process.
(2) The Occupier of the factory shall provide suitable respiratory
protective equipment for use by workers in emergency to prevent inhala
tion of dusts, fumes or mists. Sufficient number of complete sets of such
equipment shall always be kept near the workplace and the same shall be
properly maintained and kept always in a condition to be used readily.
(3) The Occupier shall provide and maintain for the use of all
persons employed, suitable accommodation for the storage and make
adequate arrangements for cleaning and maintenance of personal
protective equipment.
9. Prohibition relating to women and young persons. •• No woman
or young person shall be employed or permitted to work in any man
ganese process.
R.95]
\
TAMILNADUFACTORIESRULES, 1950
10. JFood, drinks prohibited in the workrooms. •• No food, drink,
pan and supari or tobacco shall be allowed to be brought into or con
sumed by any worker in any work room in which any manganese process
is carried on.
11. Mess-room. •• There shall be provided and maintained for the
use of the persons employed in a manganese process a suitable mess
room which shall be furnished with sufficient tables and benches and
adequate means for warming of food. The mess room shall be placed
under the charge of a responsible person and shall be kept clean.
12. Washing facilities. •• There shall be provided and maintained in
a clean state and in good condition, for the use of persons employed on
manganese process a wash place under cover, with either : --
(1) a trough with a smooth impervious surface fitted with a waste
pipe without plug. The trough shall be of sufficient length to allow at least
60 centimetres for every ten such persons employed at any one time, and
having a constant supply of water from tap or jets above the trough at
intervals of not more than 60 centimetres, or at least one wash basin for
every five such persons employed at any one time, fitted with a waste pipe
and plug and having a constant supply of water ; and
(2) sufficient supply of soap or other suitable cleaning material
and nail brushes and clean towels.
13. Cloak-room. •• If the Chief Inspector so requires there shall be
provided and maintained for the use of persons employed in managanese
process a cloak-room for the clothing put off during working hours with
adequate arrangement for drying the clothing.
14. Cautionary placard instructions. •• Cautionary notices in the
following form and printed in the language of the majority of the workers
employed, shall be affixed in prominent places in the factory where they
can be easily and conveniently read by the workers and arrangements
shall be made by the occupier to instruct periodically all workers
employed in a manganese process/regarding the health hazards con
nected with their duties and the best preventive measures and methods
to protect themselves. The notices shall always be maintained in a legible
condition.
Cautionary notice
[R.95
Manganese a�d Manganese Compounds --
1. Dust fumes and mists of Manganese and Compounds are
toxic when inhaled or when ingested.
2. Do not consume food or drink near the work place.
3. Take a good wash before taking meals.
4. Keep the working area clean.
5. Use the protective clothing and equipments provided.
6. When required to work in situations where dusts, fumes, or
mists are likely to be inhaled, use respiratory protective equ
ipments provided for the purpose.
7. If you get severe headaches, prolonged sleeplessness or
abnormal sensations on the body, loose gait, speech interf
erence and loss of virility, report to the Manager who would
make arrangements for your examination and treatment.
l[SCHEDULE XXVI
Carbon Disulphide Plants
1. Application. •• This Schedule shall apply to all electric furnaces �n
which carbon disulphide is generated and all other plants where carbon
disulphide, after generation is condensed, refined and stored.
These rules are in addition to and not in derogation of any of the
provisions of the Act and the rules made thereunder.
2. Construction, installation and operation. ·- (a) The
buildings in which electric furnaces are installed and carbon
1 Added by 0.0. Ms. No. 314, L & E, dated the 17th April, 1976.
.J'AMILNADU FACTORIES RULES, 1950
/R 9'i • LIL NAD\J FACTORIDS RUi.l!S, 1950
I
(b) Every electric furnace and every plant in which carbon
disulphide is condensed, refined and stored with all their fittings
and attachments shall be of good construction, sound material and
of adequate strength to sustain the internal pressure to which the
furnace or the plant may be subjected and shall be so designed that
carbon disulphide liquid and gas are in closed system during their
normal working.
(e) The electric furnace supports shall be firmly grouted
about 61 centimetres 10 concrete or by other effective means.
(dv Every electric furnace shall be installed and operated
according to manufacturers' instructions and these instructions shall
be clearly imparted to the personnel in charge of construction and
operation.
(e) The instructions regarding observance of correct
furnace temperature, sulphur dose, admissible current/power con
sumption and periodical checking of charcoal level shall be strictly
complied with.
3. JElectrodes.-(a) Where upper ring electrodes made of
steel or used in the electric furnace, they shall be of seamless tube
construction and shall have arrangement for being connected to
cooling water system through a siphon builts in the electrodes or
through a positive pressure water-pump.
(b) The arrangement for cooling referred to in clause (a)
shall be connected with automatic alarm system which will actuate
in the event of interruption of cooling water in the electrodes and
give visible and audible alarm signals in the control room and
simultaneously stop power supply for the furnace operation and to
stop the further supply of water. The alarm system and the
actuating device shall be checked every day.
1[4. Maintenance of charcoal level -When any electric
furnace is in operation, it shall be ensured that the electrodes are
kept covered with charcoal bed.]
5. Cbarcoail sepairafor.-(a) Cyclone type of charcoal
separator shall be fitted on the offtake pipe between the electric
furnace and sulphur separator to prevent entry of pieces of char·
coal into the condensers and piping.
1 Subs. by G.O. Ms. No. 288, Labour and Employment, dated the 12th
April, 1978.
disulphide after generation is condensed and refined shall be·
segregated from other parts of the factory and shall be of open
type to ensure optimum ventilation and the plant layout shall be
such that only a minimum number of workers are exposed to the
risk of any fire or explosion at any one time.
49o TAM". Nanu FACTORIES RULES, 1950
(b) Any other design for gas ott‘take pipe which does not
allow charcoal pieces into the condensers and piping may he
adopted.
6. Rupture Discs and Safety Seal.—~(rr) At least two
rupture discs of adequate size which shall blow nfl‘ a: a pressure
twice the maximum operating pressure shall he provided on each
furnace and shall either be mounted directly on the top of the
furnace or each through an independent pipe as close as possible
to the furnace.
(b) A safety water seal shall be provided at the best possi-
ble location to ensure the maximum and efi‘ective operation of the
rupture discs mentioned in (a) above.
7. Pyrnmeter and Mannmeters,——(a) Each electric furnace
thallhe fitted with adequate number of pyrometers 1[to give In
indication of the temperature as correctly as reasonably practica-
ble) at various points in the furnace. The dials for reading the
temperature shall be located in the control room.
(b) l[Manornelers or any other suitable devices] shall be
provided for indicating pressure—
(i) in the ofitake pipe before and after the sulphur
separator; and
(ii) in primary and secondary condensers.
8. Check Valves or Water Seals.——All piping carrying
carbon disulphide shall be fitted with check valves or water cells
at suitable positions so as to prevent gas from flowing back into
any electric furnace in the event of its shut down.
9. Inspection and maintenance of Electric Furnaces—(a)
Every electric furnace shall be inspected internally by a competent
person—
(i) before being placed in service after installation ;
(ii) before being placed in service after reconstruction or
repairs ; and
(iii) periodically every time the furnace is opened for
cleaning or for replaced electrodes.
In respect of item (iii) if it is felt by operators that during
de-asbing it is not necessary to inspect internally so as to conserve
the heat in the furnace. internal inspection can be done away with.
(b) When an electric furnace is shut down for cleaning,—
(i) if removal of any part of the lining is resorted to, the
condition of the shell shall be closely inspected. and
1 Subss by G.O. M5. N0. 288, leour and Employment, dated the lZlh
April, 1973.
(ii) any plates forming shell found corroded to the extent
that safety of the furnace is endangered shall be replaced:
:n.o. Maintenance of Records.-The following hourly records
shall be maintained in a log book :-
(i) Manometer reading at the points specified in clause (b)
of rule 7.
(ii) Gas temperature indicated by pyromete�s and all
other vital points near the sulphur separator and primary and
secondary condensers.
(iii) Water temperature and flow of water through the
siphon in the electrodes.
(iv) Primary and secondary voltages and current and
energy consumed.
U. Electrical apparatus, wiring and fittings.-All build·
ings in which carbon disulphide is refined or stored shall be
provided with electrical apparatus, wiring and fittings which shall
afford adequate protection from fire and explosion.
12, Prohibition relating to smoking.-No person sbalJ
smoke or carry matches, fire or naked light or other means of
producing a naked light or spark in buildings in which carbon
disulphide is refined ur stored, and a notice in the language under
stood by a majority of the workers shall be posted in the plant
prohibiting smoking and carrying of matches, fire or naked light or
other means of producing naked light or spark into such rooms.
13. Means of escape.-Adequate means of escape shall be
provided and maintained to enable persons to move to a safe place
as quickly as possible in case of an emergency At least two
independent staircases of adequate width shall be provided in every
building housing the furnaces at reasonable intervals at opposite
ends. These shall always be kept clear of a l l obstructions and so
designed as to afford easy passage.
14. Warnings in case of fire = There shall be adequate
arrangements for giving warnings in case of fire or explosion which
shall operate on electricity and, in case of failure of electricity, by
some mechanical means.
15. Fbe-figbtill� equfipment.-(a) Adequate number of
suitable fire extinguishers or other fire-fighting equipment shall be
kept in constant readiness for dealing with risks involved and
depending on the amount and nature of materials stored ;
(b) Clear instructions as to how the extinguishers or other
e1'111:;.,ment should be used shall be printed in the language which the
TAMIL NADU FACTORIES RULES, 1950
majority of the workers employed understand. The instructions
shall be affixed to each extinguisher or other equipment and the
personnel trained in their use shalJ be supplied with the instruc
tions.
16. Bulk sulphur.-(a} Open or semi-enclosed space for
storage of bulk sulphur shall be sited with due regard to the
dangers which may arise from sparks given oft' by nearby locomo
tive, etc., and precautions shall be taken to see that flames, smoke
and matches and other sources of ignition do not come in contact
with the clouds of dust arising during handling of bulk sulphur.
(b) AU enclosures for bulk sulphur shall be of non-com
bustible construction, adequately ventilated and so designed as to
provide a minimum of ledges on which dust may lodge.
( c) The bulk sulphur in the enclosures shall be hand led in
such a manner as to minimise the formation of dust clouds and no
flame, smoke and matches or other sources of ignition shall be
employed during handling and non-sparking tools shall be used
whenever sulphur is shovelled or otherwise removed by hand.
(d) No repairs involving flames, beat or use of hand or
power tools shall be made in the enclosure where bulk sulphur is
stored.
:D.7. Liquid sulphur.-Open flames, electric sparks and other
sources of ignition, including smoke and matches, shall be excluded
from the vicinity of molten sulphur.
18. Tralnlng and supervnsion.-(a) All electric furnaces
and all plants in which carbon disulphide is condensed, refined or
stored shall be under adequate supervision at all times while the
furnaces and plant are in operation.
(b) Workers incharge of operation and maintenance of
electric furnaces and the plants shall be properly qualified and
adequately trained.
ll.9. Washing facilities.-Tbe occupier shall provide and
maintain in a clean state and in good repair, for the use of all
persons employed a wash-place under cover with atleast one tap
or stand-pipe. having a constant supply of clean water for every
five such persons, the taps or stand-pipes being spaced not Jess than
120 centimetres apart with a sufficient supply of soap and clean
towels, provided that towels shall be supplied individually to each
worker if so ordered by the Inspector. All the workers employed
in sulphur storage handling and melting operations shall be provi
ded with a nail brush ..
TAMIL NADU FACTORIES RULBS, 1950
R. 95] I
'f.AMIL NADU FACTORIES RULES, 1950 ,
20. Personal Protective eqoipment.-(a) �uitabte goggles
and protective clothing consistmg of overalls without p_ockets.
gloves and foot-wear shall be provided for the use of operatives:
(i) when operating valves or cocks controlling fluids, etc
(ii) drawing off of molten sulphur from sulphur pots, and
(iii) handling charcoal or sulphur.
(b) Suitable respiratory protective equipment shall be
provided and stored in the appropriate place for use during
abnormal conditions or in an emergency.
(c) Arrangements shall be made for the proper and efficient
clearing of all such protective equipment.
i:n.. CHoak-rooms.-There shall be provided and maintained!
for the use of all persons employed in the processes a suitable,'<!oak
room for clothing put off during work hours and a suitable place
separate from the cloak-room for the storage ofoveralls or working
clothes The accommodation so provided shall be placed in the
charge of a responsible person and shall be kept clean.
22. Unauthorised persens+-Only maintenance and repair
personnel, persons directly connected with the plant operation and
those accompanied by authorised persons shall be admitted into
the plant.]
SCHllDULB XXVII
Manufacture, handling and use of Benzene
n.. Application.-The provisions of this Schedule shall apply
t.) all factories or parts thereof in which Benzene or substances
containing Benzene are manufactured, handled or used.
2. Definitions - For the purpose of this Schedule.i--
(a) 'Substances containing benzene' means substances
wherein benzene content exceeds 1 per cent, by vo lume ;
(b) ' Substitute' means a chemical which is harmless or
Jess harmful than benzene and can be used in place of benzene ;
(c) 6 Enclosed system' means a system which will not allow
escape of benzene vapours to the working atmosphere ;
(d) ' Efficient exhaust draught • means localised ventilation
effected by mechanical means for the removal of gases, vapours.
dusts or fumes so as to prevent them from escaping into the air of
a�y workroom. No draught shall be deemed to be efficient if it
falls to remove smoke generated at the point where such gases.
vapours, fumes or dusts orginate,
TAMIL NADU FACTORIES RULES, 1950
3. Prohibition and substitution.-1[(a) Use of benzene
and substances containing benzene is prohibited in the following
processes:
(i) manufacture of varnishes, paints and thinners ;· and
(ii) cleaning and degreasing operations ]
9[(b)] Benezene or substances containing Benzene shall not
be used as a solvent or diluent unless the process in which it is
used is carried on in an enclosed system or unless the process is
carried on in a manner which is considered equally safe as if it
were carried out in an enclosed system ;
!![(c)] Where suitable substitutes are available, they shall be
used instead of Benzene or substances containing Benzene. This
provision, however, shall not apply to the processes specified in
Appendix A ;
I
'[(d)] The Chief Tnspector may, subject to confirmation by
the State Government, permit exemptions from the percentage
laid down in clause 2 (a) and also from the provisions of sub
clause (b} temporarily under conditions and within limits of time
to be determined after consultation with the employers and workers
concerned.
4. Protection against inhalation.--(a) The process involv
ing the use of Benzene or substances containing Benzene shall as
far as practicable, be carried out in an enclosed system ;
(b) Where, however, it is not practicable to carry out the
process 10 an enclosed system, to workroom in which Benzene or
substances containing Benzene are used, shall be equipped with an
efficient exhaust draught or other means for the removal of Benzene
vapours to prevent their escape into the air of the workroom so
that the concentration of Benzene in the air does not exceed 25
parts per million by volume or 80 mg/m3;
(c) Air analysis for the measurement of concentration of
Benzene vapours in air shall be carried out every 8 hours or at such
intervals as may be directed by the Chief Inspector at places where
process involving use of Benzene is carried on and the remit of
such analysis shall be recorded in a register specially maintained
for this purpose. If the concentration of Benzene vapours in air as
measured by air analysis. exceeds 25 parts per million by volume
or 80 mg/m3 the Manager shall forthwith report the concentration
to the Chief Inspector stating the reasons for such increase;
1 Ins. by G.O Ms. No. 3b6, Labour, dated the 23rd February, 1985.
2 Re-lettered by G.O. Ms. No. 366, Labour. dated the 23rd February,
1985.
R. 95J
exposed to concennation of Benzene m the air of the workr�om
exceeding the maximum referred to in clause (b) shall be provided
with suitable respirators or face masks. 1 be duration of such
exposure shall be limited as far as possible.
5. Measures atiaiost skin cootact.-(a) Workers who are
likely to come in contact with 1 iq1 1 1d Benzene or liquid substances
contalnmg Benzene shall be provided with suitable gloves, aprons,
boots and where necessary, vapour-tight chemical goggles made of
material not affected by Benzene or its vapours.
(b) 1 he protective wear referred to in sub-clause (a) shall
be maintained m good condition and inspected regularly.
6. Prohibition relating to employment of women and
young persons.-No woman or young person shall be employed
or permitted 10 work in any workroom involving exposure to
Benzene or substance containmg Benzene.
7. !Labelling.-Every container holding Benzene or sub
stances containing Benzene shall have the word 'Benzene" and
approved danger symbols clearly visible oo it and shall also display
information on Benzene content, warning about toxity and warning
about inflammability of the chemical.
8. Improper use of Beozene.-(a) The use of Benzene or
substances containing Benzene by workers for cleaning their hands
or their work clothing shall be prohibited;
(b) Workers shall be instructed on the possible dangers
arising from such misuse.
9. Prohibition of consuming food, etc , in workrooms.
No worker shall be allowed to store or consume food or drink in
the workroom in which Benzene or substances containing Benzene
are manufactured, handled, or used. Smoking and chewing tobacco
or pan shall be prohibited in such workrooms.
Ul. Instruction as regards risks.-Every worker on h is first
employment shall be fully insu ucted on the properties of Benzene
or <ubstances containing Benzene which he has 10 handle and of
the dangers involved. Workers shall also be instructed on the
measures to be taken to deal with in an emergency.
U. CHtfoMry notlices.--Cautionary notices in the form
specified in Appendix .8 and presented in the language easily read
and understood by the majority of the workers shall be displayed
in promment places in the workrooms where Benzene or substance,
containing Benzene are manufactured, handled or used,
TAMIL NADU FACTORJFS RULBS, 1950
(d) Workers who for special reasons are likely to hoe
12. Washing facilities, cloak-room and mess-room. •• In factories in
which Benzene or substances containing Benzene are manufactured,
handled or used, the Occupier shall provide and maintain in clean state
and in good repair ··
(a) Washing facilities under cover of the standard of at least one
tap for every 10 persons having constant supply of water with soap and a
clean towel provided individually to each worker if so ordered by the
Inspector ; '
(b) A cloak-room with lockers for each worker, having two com
partments - one for street-clothing and one for work-clothing;
(c) A mess-room furnished with tables and benches with means
for warming food, provided that where a canteen or other proper arran
gements exist for the workers to take their meals, the requirements of
mess-room shall be dispensed with.
1[13. Medical facilities and..Eeiords of examinations and tests • •• ( 1)
The occupier of every factory to which the schedule applies, shall --
(a) employ a qualified Medical Practitioner for medical sur
veillance of theworkers employed therein whose employment shall be
subject to the approval'of the Chief Inspector of Factories; and
(b) provide to the said medical practitioner all the necessary
facilities for the purpose referred to in clause (a).
(2) The record of medical examinations and appropriate tests
carried out by the said medical practitioner shall be maintained in a
separate register approved by the Chief Inspector of Factories, whicl
shall be kept readily available for inspection by the Inspector.
1 Subs. vide G.O. Ms. No. 2223, L & E, �ated the 6th October, 1988.
TAMILNADU FACTORIES RULES, 1950 [R.95
14. Medical Examination by the Certifying Surgeon • •• (1) Every
worker employed in processes mentioned in paragraph 1, shall be
examined by a Certifying Surgeon within 15 days of his first employment.
Such examination shall include tests for detection of Phenol in urine and
determination of urinary sulphide ratio and C.N.S. and Haemotologyical
R.95] TAMIL NADU FACTORIES RULES, 1950
tests. No worker shall be allowed to work after 15 days of his first
employment in the factory unless certified fit for such employment by the
Certifying Surgeon.
(2) Every worker employed in the said processes shall be re-ex
amined by a Certifying Surgeon at least once in every twelve calendar
months and such examinations shall, wherever the Certifying Surgeon
considers appropriate, include all the tests specified in sub-paragraph
(1). Further, every worker shall also be examined once in every three
months by the factory Medical Officer.
(3) The Certifying Surgeon after examining a worker, shall issue
a certificate of fitness in Form 27. The record of examination and re
examinations carried out shall be entered in the Certificate and the
Certificate shall be kept in the custody of the Manager of the Factory.
The record of each examination carried out under sub-paragraphs (1)
and (2), including the nature and the results of these tests, shall also be
entered by the Certifying Surgeon in a Health Register in Form 17.
( 4) The certificate of fitness and the health register shall be kept
readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a
worker is no longer fit for employment in the said processes on the ground
that continuance therein would involve special danger to the health of the
workers, he shall make a record of his findings in the said certificate and
the Health Register. The entry of his findings in those documents should
also include the period for which he considers that the said person is unfit
to work in the said processes. The person so suspended from the process
shall be provided with alternate placement facilities unless he is fully
incapacitated in the opinion of the Certifying Surgeon, in which case the
person affected shall be suitably rehabilitated.
(6) No person who has been found unfit to work as said in
sub-paragraph (5) shall be re-employed or permitted to work in the said
processes unless the Certifying Surgeon, after further examination; again
certifies him fit for employment in those processes.]
15. Exemption. -· If in respect of any factory, thi::. 'Chief Inspector of
Factories is satisfied that ( owing to the exceptional circumstances or
49 8
_
TAM'ILNADU FAizrom-zs RULES, 1950 [R35
infrequency of the process or for any other reason) all or any of the
'
provisions of the Schedule are not necessary for the proleclinn of persons
employed in the facmry, he may by germinate in writing. exempt such
factory frbrn all or any of such provisions subject 10 such conditions as he
may specify therein. Such certificates may at any time be revoked by the
Chief Inspector.
API'mDIX A
[See Clause 3 (NJ
1. Production of Benzene.
2. Process where Benzene is used for chemical synthesis.
3‘ Motor spirits (used as fuel).
Previous and next
Questions people ask
Is form 39 or in Form No. 17 as the case may be of the Tamil Nadu Factories Rules,1950 still in force?
No repeal of the Tamil Nadu Factories Rules,1950 is recorded.