LawGrids logoLAWGRIDS.ORG

Regulation 42, Indian Boiler Regulations, 1950: Hydraulic Test

Indian Boiler Regulations, 1950 - Regulation 42

Text of regulation 42

Hydraulic Test

42. Hydraulic Test.—Each tube shall be tested at the makers works by hydrau- lic pressure in accordance with the following table governing the rolation between the test pressuro and tho design pressure to which tho tube will bo subjected in aei-vioe. Design pressure lb/nq. in. Up to and including 500 . Abovo COO upto tind including 1000 . Abovo 1000 Hydraulic toat prosHUro lb/sq. ni. minimum inoo Twice tho design pressure: 1000 ubove the design pressure. -#18 THE GAZETTE OF INDIA EXTRAORDINARY [PART U In all i-nses the tensile strews (S) on the material when under these tests shall DP not exceed 10 tons, per sq. in. as doterminod by the formula S «= -5— Where D =aoutsido diameter of tho tube in inches P a tea t pressure in tons per sq. in. t =inominal thickness of tube wall in inches. HOT FINISHED SEAMLESS STEEL BOILER AND SUPERHEATER. TUBES FOR DESIGNED TEMPERATURES NOT EXCEEDING 850nF (454°C)

Previous and next

All provisions of Indian Boiler Regulations, 1950

Questions people ask

Is regulation 42 of Indian Boiler Regulations, 1950 still in force?

No repeal of Indian Boiler Regulations, 1950 is recorded.