Regulation 42, Indian Boiler Regulations, 1950.: Hydraulic Test
Indian Boiler Regulations, 1950. - Regulation 42
Text of regulation 42
Hydraulic Test
42. Hydraulic Test.—Each tube shall be tested at the makers works by hydrau-
lic pressure in accordance with the following table governing the rolation between
the test pressuro and tho design pressure to which tho tube will bo subjected in
aei-vioe.
Design pressure lb/nq. in.
Up to and including 500 .
Abovo COO upto tind including 1000 .
Abovo 1000
Hydraulic toat prosHUro lb/sq. ni.
minimum
inoo
Twice tho design pressure:
1000 ubove the design pressure.
-#18 THE GAZETTE OF INDIA EXTRAORDINARY [PART U
In all i-nses the tensile strews (S) on the material when under these tests shall
DP
not exceed 10 tons, per sq. in. as doterminod by the formula S «= -5—
Where D =aoutsido diameter of tho tube in inches
P a tea t pressure in tons per sq. in.
t =inominal thickness of tube wall in inches.
HOT FINISHED SEAMLESS STEEL BOILER AND SUPERHEATER.
TUBES FOR DESIGNED TEMPERATURES NOT EXCEEDING
850nF (454°C)
Previous and next
Questions people ask
Is regulation 42 of Indian Boiler Regulations, 1950. still in force?
No repeal of Indian Boiler Regulations, 1950. is recorded.