Rule 95, THE CENTRAL MOTOR VEHICLES RULES, 19891: Size and ply rating of tyres
THE CENTRAL MOTOR VEHICLES RULES, 19891 - Rule 95
Text of rule 95
Size and ply rating of tyres
95. Size and ply rating of tyres.—150 151 152[(1) The tyres including radial tyres used on all motor
vehicles manufactured or imported on and after the 1st day of April, 2006, other than
agricultural tractors, construction equipment vehicles and power tillers shall comply with
the requirements specified in A1S:044 (Part 1 to 3): 2004 as applicable till the
corresponding BIS specifications are notified under the Bureau of Indian Standards Act,
1986 (63 of 1986):
150 Substituted by G.S.R. lll(E),dated 10-2-2004, for "a motor vehicle" (w.e.i, 10-8-2004).
151 Inserted by G.S.R. lll(E),dated 10-2-2004 (w.e.f. 10-8-2004).
152 Sub-R. (1) substituted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-9-2005).
Provided that the selection and fitment of tyres for motor vehicles manufactured or
imported on and from the 1st day of April, 2006 shall be in accordance with AIS:
050:2004 in the case of two and three-wheelers and AIS: 051:2004 in the case other
motor vehicles, till such time the corresponding BIS specifications are notified under the
Bureau of Indian Standards Act, 1986 (63 of 1986):
Provided further that Central Institute of Road Transport, Pune and any other agency
which may be authorised by Central Government from time to time can carry tests for
verification against AIS:044:2004 for tyres for the purposes of rule 126.]
72
153[(2)The maximum gross vehicle weight and the maximum safe axle weight of each
axle of a vehicle shall, having regard to the size, nature and number of tyres and
maximum weight permitted to be carried by the tyres as per sub-rule (1), be—
(i) vehicle rating of the gross vehicle weight and axle weight respectively as duly certified
by the testing agencies for compliance with rule 126, or
(ii) the maximum vehicle weight and maximum safe axle weight of each vehicle
respectively as notified by the Central Government, or
(iii) the maximum total load permitted to be carried by the tyre as specified in sub-rule (1)
for the size and the number of the tyres fitted on the axle(s) of the vehicle, whichever is
less:
Provided that the maximum gross vehicle weight in respect of all vehicles, including multi
axle vehicles shall not be more than the sum total of all the maximum safe axle weights
put together.
154[155[(2-A) The size of the tyres of a construction equipment vehicle] specified in column
(1) of the Table below shall have a ply rating specified in the corresponding entry in
column (2) of the said Table in respect of maximum weight permitted to be carried by
such tyre specified in the corresponding entry in column (3) thereof:
Provided that the maximum safe load for single axle with two or more tyres shall not
exceed 10.2 tonnes.
OFF-THE-ROAD SERVICE: CONVENTIONAL AND WIDE BASE DIAGONAL PLY
TYRES
TABLE
AGRICULTURAL TRACTOR DRIVE WHEEL
Tyre size Designation Ply rating Maximum weigh t permitted to be carried
(Kgs.)
8.3/8-24 4 630
6 825
8.3/8-32 4 6 730
925
11.2/10-28 4 900
6 1120
8 1320
12.4/11-24 4 950
6 1215
153 Inserted by G.S.R 214(E), dated 18-3-1999 (w.e.f. 18-3-1999).
154 Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000),
155 Substituted by G.S.R. 720(E), dated 10-9-2003, for the brackets, figure and words "(2) The
size of the tyres of a construction equipment vehicle" (w.e.f. 10-10-2003).
73
8 1450
12.4/11-28 4 1030
6 1285
8 1550
10 1600
12 1650
12.4/11-36 4 1150
6 1450
12.4/11-38 4 1180
6 1500
8 1750
13.6/12-28 4 1120
6 1450
8 1650
10 1750
12 1800
16.9/14-28 6 1850
8 2180
10 2430
12 2725
ROAD GRADER
13.00-24 8 2040
12 2485
14.00-24 12 3015
OFF TI IE ROAD HAULAGE SERVICE TYRES
Tyre size Designation Ply rating Maximum weight permitted to be carried
(Kgs.)
12.00-20 14 2650
16 2900
12.00-24/25 14 3000
16 3250
13.00-24/25 18 3875
14.00-24/25 16 4000
20 4625
24 5150
16.00-24/25 20 5450
24 6000
28 6700
18.00-24/25 12 4750
16 5600
20 6500
24 7300
28 8000
32 8750
WIDE BASE
23.5-25 12 5300
16 6150
20 7300
24 8000
74
Note.—156 157 158 159[1.] The load rating for tyres not covered by the aboveTable may be notified by
the Central Government as and when such tyres are introduced on construction
equipment vehicles, and until these are notified, the provisional load rating declared by
the construction equipment vehicle manufacturer may be certified by the certifying test
agency referred to in rule 126.]
156 The existing note numbered as "1" by G.S.R. 116(E), dated 27-2-2002 (w.e.f. 27-8
2002).
157 Inserted by G.S.R. 116(E), dated 27-2-2002 (w.e.f. 27-8-2002).
158 Inserted by G.S.R. 221(E), dated 28-3-2001 (w.e.f. 28-9-2001).
159 Inserted by G.S.R 400(E), dated 31-5-2002 (w.e.f. 31-5-2002).
157[2. The maximum axle loading capacities shall be verified based on the safe loading
capacities of the tyres. In cases where the axle load exceed 10.2 tonnes, the vehicle
manufacturer shall ask the user to seek the prior permission of the concerned Regional
or State Transport Authorities in whose jurisdiction the construction equipment vehicle is
expected to ply depending upon the conditions of roads/bridges, where deemed fit. Such
construction equipment vehicles whose axle load exceeds 10.2 tonnes shall display
permanently on the vehicle a placard indicating "NOT FOR PLYING ON ROADS". These
conditions shall be mentioned in the certificate, issued by the testing agencies referred
to in the rule 126, where the axle load exceeds 10.2 tonnes.]
(3) No tyre shall have a ply rating more than 20, for applications of on-highway and such
ply rating shall not be prescribed by either vehicle manufacturer or employed by vehicle
user on this class of vehicle.
(4) Check on sub-rule (3) of rule 95 on commercial vehicles will be conducted by the
authority indicated in sub-rule (1) of rule 126, while conducting the checks.]
158[(5) Every tyre manufacturer shall, in addition to any trade mark or size of the tyre,
also emboss on it the following, namely:—
(i) Week and year code or month and year code of manufacture; and
(ii) maximum load carrying capacity.]
159[(6) In the case of Indian manufactured vehicles and imported vehicles (new and old),
the size of tyres if included in the International Standards, namely, ECE, JATMA,
ETRTO and T&RA besides Bureau of Indian Standards may also be accepted under this
rule:
Provided that the following conditions shall be complied with:
(i) that testing agencies referred to in rule 126 shall satisfy themselves about
the load and speed rating of the tyre with reference to the Indian conditions;
75
(it) that the test report/certificate issued by the testing agency of the
country of origin shall be verified for acceptance by the testing agency referred
to in rule 126;
(iii) that for tubeless tyres fitted on imported vehicles confirming to conditions (/)
and (it) shall also be allowed.]
160[95-A. Size and ply rating of tyres for agricultural tractor.—(1) The tyre of the
agricultural tractor shall have load carrying capacity as may be specified by the tyre
manufacturer, subject to the condition that the maximum load specified by the
agricultural tractor manufacturer shall not be greater than the load permitted by the tyre
manufacturer.
(2) The agricultural tractor manufacturer shall select only that rim size as recommended
by the tyre manufacturer.
Note.—For compliance to the above two sub-rules, the following shall be referred to IS:
13154-1991 as amended from time to time—Tyres for agricultural tractor, implements
and power tillers. In case a particular size of tyre is not listed in IS: 13154-1991, any
equivalent International Standard like Economic Commission of Europe (ECE),
Japanese Automotive Tyre Manufacturers Association (JATMA), European Tyre and
Rim Technical Organisation (ETRTO), The Tyre and Rim Association Inc. (T & RA) and
Indian Tyre Technical Advisory Committee (ITTAC), etc., shall be accepted.]
161[95-B. Size and ply rating of tyres for power tillers.—(1) The tyre should have load
carrying capacity as specified by the tyre manufacturer, however, the maximum load
specified by the power tiller manufacturer shall not be greater than that permitted by the
tyre manufacturer.
(2) The power tiller manufacturer shall select the recommended/ preferred rim sizes
only, as suggested by the tyre manufacturer.
Note.—For compliance to this rule, the following standards shall be referred to,
namely:—
(i) 1ST3154-1991, as amended from time to time-Tyre for agricultural tractor, implement
and power tillers.
(it) In case a particular size of tyre is not listed in IS: 13154-1991, as amended from time
to time, any equivalent International Standard like ECE, JATMA,ETRTO,TNRA, ITTAC,
etc.]
160 Inserted by G.S.R 111(E), dated 10-2-2004 (w.e.f. 10-8-2004).
161 R 95-B inserted by G.S.R. 5S9(E),dated 16-9-2005 (w.e.f. 16-9-2006).
76
Brakes, steering gears, safety glass and windscreen wipers
Previous and next
Questions people ask
Is rule 95 of THE CENTRAL MOTOR VEHICLES RULES, 19891 still in force?
No repeal of the CENTRAL MOTOR VEHICLES RULES, 19891 is recorded.