LawGrids logoLAWGRIDS.ORG

Regulation 10, Joint Electricity Regulatory Commission” (Distribution Code) Regulations, 2010.: CONSTRUCTION PRACTICES

Joint Electricity Regulatory Commission” (Distribution Code) Regulations, 2010. - Regulation 10

Text of regulation 10

CONSTRUCTION PRACTICES

10. CONSTRUCTION PRACTICES .- 1. All electric supply lines and apparatus shall be of sufficient ratings for power, insulation and estimated fault current and of sufficient mechanical strength, for the duty, which may be required to be performed under the environmental conditions of installation, and shall be constructed, installed, protected, worked and maintained in such a manner as to ensure safety of human beings, animals and property. 2. The relevant Code of Practices of the Bureau of Indian Standards, REC Standard, including National Electrical Code, if any, may be followed. The material and apparatus used shall conform to the relevant specification of the Bureau of Indian Standards where such specifications have been already laid. 3. The licensee and the User shall prepare and observe the Construction and Maintenance Manuals for various equipment/works for HT / LT Lines and Grid / Switching sub-stations. The Construction and Maintenance Manual shall be prepared taking into consideration the following:- (a) Technical Standards for construction of electrical plants, electric lines and connectivity to the grid specified by the Central Electricity Authority under Clause (b) of section 73 of the Electricity Act 2003; (b) Safety requirements for construction, operation and maintenance of electrical plants and electric lines specified by the Central Electricity Authority under Clause (c) of section 73 of the Act ; (c) REC Construction Standards and Standard Design Layouts; (d) CBIP Publications on Code of Practices; (e) Code of Practices issued by the Bureau of Indian Standards for various equipment and maintenance practices; and (f) Instruction Manuals for installation, operation and maintenance issued by standard equipments manufacturer concerned. 4. The standard tables for conductor size, fuse size, wire gauge, electrical clearance, ground wire size, insulation resistance and earth resistively etc. shall be included in the Construction and Maintenance Manuals. The licensee shall ensure that its construction and maintenance staff strictly observe these Manuals. The copy of Construction and Maintenance Manuals shall be furnished to the Commission. 43 | P a g e

Previous and next

All provisions of Joint Electricity Regulatory Commission” (Distribution Code) Regulations, 2010.

Questions people ask

Is regulation 10 of Joint Electricity Regulatory Commission” (Distribution Code) Regulations, 2010. still in force?

No repeal of Joint Electricity Regulatory Commission” (Distribution Code) Regulations, 2010. is recorded.