Rule 42, Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008: Heat treatment of lifting gears
Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008 - Rule 42
Text of rule 42
Heat treatment of lifting gears
42. Heat treatment of lifting gears.—The employer shall ensure at a
construction site of a building or other construction work that,—
(a) all chains other than bridle chains attached to derricks and all
rings, hooks, shackles and swivels, used in hoisting or lowering
of such derricks, are effectively annealed under supervision
of a competent person and at the following intervals,
namely :—
(i) such chains, rings, hooks, shackles and swivels, which are
not more than twelve-and-a-half millimetre of length, are
so annealed at least once in every six months; and
(ii) all other such chains, rings, hooks, shackles and swivels
are so annealed at least once in every twelve months :
Provided that such annealing as referred to in sub-clause
(i) and sub-clause (ii), shall not be required, if the Inspector,
having jurisdiction, after obtaining the approval of the Chief
Inspector, directs that such chains, rings, hooks, shackles
and swivels undergo some other treatment and in such cases,
the treatment directed by such Inspector, shall be
followed :
Provided further that in case of such chains, rings,
hooks, shackles and swivels, used solely on such derricks
and other hoisting appliances, which are worked by hand,
the provisions of sub-clause (i) and (ii), as the case may be,
shall apply as if for the period of six months and twelve
months the period of twelve months and two years
respectively have been substituted therein :
Provided further that in case where the Inspector, having
jurisdiction of the area, is of the opinion that owing to the
size, design material or frequency of the use of any such
chains, rings, hooks, shackles and swivels, the requirement
of this clause for annealing is not necessary for the protection
of building worker, he may after obtaining the approval of
the Chief Inspector, certify in writing to such employer
that subject to the conditions, specified in such certification,
Section 40 (2) (e)
32
such chains, rings, hooks, shackles and swivels, are
exempted from such annealing and thereafter, the provisions
of this clause shall apply subject to such exemption :
Provided further that this clause shall not apply to—
(i) pitched chains, working on sprocket or sprocketed wheels;
(ii) rings, hooks and swivels, permanently attached to pitched
chains, pulley blocks or weighing machines; and
(iii) hooks and swivels, having ball bearings or other case
hardened parts;
(b) a chain or a loose gear made of high tensile steel or alloy steel is
plainly marked with a mark indicating that it is so made;
(c) no chain or loose gear made of high tensile steel or alloy steel is
subjected to any form of heat treatment, except where such
treatment is necessary for the purpose of repair of such chain
or loose gear and that such repair is made under the direction
of the competent person; and
(d) the wrought iron gear the past history of which is not traceable,
is suspected of being heat treated at incorrect temperature, is
normalised before using it on any building or other construction
work.
Previous and next
Questions people ask
Is rule 42 of Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008 still in force?
No repeal of Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008 is recorded.