LawGrids logoLAWGRIDS.ORG

Form I, Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008: FORM - I

Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008 - Form I

Text of form I

FORM - I

FORM - I [See rule 44(b)] REGISTER OF PERIODICAL TEST - EXAMINATION OF LIFTING APPLIANCE AND GEARS ETC. PART-I Initial and periodical load test of lifting appliances and their annual thorough examination. “Thorough examination” means a visual examination, supplemented, if necessary, by other means such as a hammer test, carried out as carefully as the conditions permit, in order to arrive at a reliable conclusion as to the safety of the parts examined and if necessary, for 152 such examination parts of the lifting appliances and gear shall be dismantled. (A) Initial and periodical load tests of lifting appliance Situation and No. of I certify that on the date on Remarks (to description of certificate of which I have appended my be signed lifting appliances test and signature the lifting appliance and dated) tested with examination of shown in column (1), was distinguishing competent tested and no defects, number of marks, person affecting its safe working if any conditions, were found other than those, shown in column (5) Date and Date and Signature with Signature seal with seal 1 2 3 4 5 (B) Annual thorough examination I certify that on the date on which I have appended my Remarks to be signature, the lifting appliance shown in column (1) signed and dated was thoroughly examined and no defects affecting its safe working conditions were found, other than those, shown in column (12) Date and signature with seal 6 7 8 9 10 11 12 1. 2. Note.— If all the lifting appliances are thoroughly examined on the same date it will be sufficient to enter in column (1) “All lifting appliances”. If not, the parts, which have been thoroughly examined on the dates, must be clearly indicated. Date and signature with seal Date and signature with seal Date and signature with seal Date and signature with seal Date and signature with seal Remarks to be signed and dated 153 PART II Initial and periodical load test of loose gears and annual thorough examination List of loose gear : The following classes of loose gears, namely :— 1. Chains made of malleable cast iron; 2. Plate link chains; 3. Chains, rings, hooks, shackles and swivels made of steel; 4. Pitched chains; 5. Rings, hooks, shackles and swivels permanently attached to pitched chains, pulley blocks, container spreaders, trays, slings, baskets, etc. and any other similar gear; 6. Hooks and swivels having screw-threaded parts or ball bearings or other case hardened part; and 7. Bordeaux connections. Initial Test and periodical load test of loose gears 1 2 3 4 5 1. 2. 3. 4. 5. Distinguishing No. or marks Description of loose gear tested and examined No. of certificates of test and examination of competent person I certify that on the date on which I have appended my signature, the loose gears, shown in columns (1) and (2), were tested and no defects affecting the safe working condition, were found other than those, shown in column (6) Date and signature with seal Date and signature with seal 154 Annual thorough examination of loose gears Remarks (to be I certify that on the date on which I have appended my signed and dated) signature the loose gear shown in columns (1) and (2) were thoroughly examined by me and no defects affecting their safe working condition were found other than those, shown in column (10) 6 7 8 9 10 1. 2. 3. 4. 5. PART III Annealing of Chains, Rings, Hocks, Shackles and Swivels (other than those exempted ) (See PART II) 12.5 mm and smaller chains, If used with lifting appliance driven by power, rings, hooks, shackles and must be annealed once at least in every six months. swivels in general use. Other If used solely with lifting appliance worked by chains, rings, hooks, shackles hand must be annealed once at least in every and swivels in general use. twelve months. If used with lifting appliance driven by power, must be annealed once at least in twelve months. If used solely with lifting appliance worked by hand, must be annealed once at least in every two years. Note.— It is recommended though not required by rules that annealing should be carried out in a suitably constructed furnace heated to temperature between 1100 degree and 1300 degree Fahrenheit or 600 degree and 700 degree Centigrade, for a period between 30 and 60 minutes. Date and signature with seal Date and signature with seal Date and signature with seal Date and signature with seal 155

Previous and next

All provisions of Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008

Questions people ask

Is form I of Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008 still in force?

No repeal of Punjab Building and Other Construction Workers ( (Regulation of Employment and Conditions of Service) Rules, 2008.) Rules, 2008 is recorded.