Rule 90, THE CENTRAL MOTOR VEHICLES RULES, 1989: Additional conditions for national permit The national permit issued under subsection (12) of section 88 shall be subject to the following additional conditions, namely
THE CENTRAL MOTOR VEHICLES RULES, 1989 - Rule 90
Text of rule 90
Additional conditions for national permit The national permit issued under subsection (12) of section 88 shall be subject to the following additional conditions, namely
90. Additional conditions for national permit
The national permit issued under subsection (12) of section 88 shall be subject to the
following additional conditions, namely:—
(1) The vehicle plying under a national permit shall be painted in dry leaf brown colour with
thirty centimetres broad white borders and the words “National permit” shall be inscribed on both
sides of the vehicle in bold letters within a circle of sixty centimetres diameter:
Provided that the body of a tanker carrying dangerous or hazardous goods shall be painted in
white colour with a dry leaf brown ribbon of 5 centimetres width around in the middle at the
exterior and that of the driver’s cabin in orange colour.
(2) A board with the inscription “National permit” valid in the State(s) of ……… with blue
letters on white background shall be carried in front top of such vehicle.
(3) No such vehicle shall carry any goods without a bill of lading in Form 50.
(4) The vehicle shall have a minimum of two drivers and shall be provided with a seat across
its full width behind the driver’s seat providing facility for the spare driver to stretch himself and
sleep:
2[Provided that this sub-rule shall apply to light motor vehicle and medium goods vehicles
only from a date to be notified by the Central Government.]
(5) The vehicle shall at all times carry the following documents and shall be produced on demand
by an officer empowered to demand documents by or under the Act, namely:—
(i) Certificate of fitness,
(ii) Certificate of insurance,
(iii) Certificate of registration,
(iv) National permit,
(v) Taxation certificate,
(vi) Authorisation.
(6) The vehicle shall be subject to all local rules or restrictions imposed by a State Government.
(7) The vehicle shall not pick up or set down goods between two points situated in the same
State 3[other than the home State].
____________________________________________
1. R 89 omitted by G.S.R. 221(E), dated 28-3-2001 (w.e.f. 28-3-2001). Earlier R. 89 was inserted by G.S.R.
76(E), dated 31-1-2000 (w.e.f. 31-1-2000). Before that R. 89 was omitted by G.S.R. 684(E), dated 5-10-
1999 (w.e.f. 22-10-1999).
2. Inserted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
3. Inserted by G.S.R. 933(E), dated 28-10-1989 (w.e.f. 28-10-1989).
68
Chapter V
Construction, Equipment and Maintenance of Motor Vehicles
Preliminary
Section 91. Definitions
In this Chapter, unless the context otherwise requires,—
(a) “class label”, in relation to any dangerous or hazardous goods, means the class label
specified in column 3 of the Table to rule 137;
(b) “consignor”, in relation to dangerous or hazardous goods intended for transportation by a
goods carriage, means the owner of such dangerous or hazardous goods;
(c) “dangerous or hazardous goods”, means the goods of dangerous or hazardous nature to
human life specified in Tables I, II, and III to rule 137;
(d) “emergency information panel”, means the panel specified in rule 134;
(e) “primary risk”, in relation to any dangerous or hazardous goods, means the most potent risk
which such goods give rise to;
(f) “subsidiary risk”, in relation to any dangerous or hazardous goods, means the subsidiary risk
which such goods are likely to give rise to in addition to the primary risk.
92. General
(1) No person shall use or cause or allow to be used in any public place any motor vehicle
which does not comply with the provisions of this Chapter:
1[Provided that nothing contained in this rule shall apply to vehicles manufactured prior to
the coming into force of the Central Motor Vehicles (Amendment) Rules, 1993.]
(2) Nothing in this rule shall apply to a motor vehicle—
(a) which has been damaged in an accident or to a vehicle stopped or impeded owing to
shortage of fuel or other temporary defects while at the place at which the accident or defect
occurred;
(b) which is defective or damaged and is being removed to the nearest place of repair or
disposal; or
(c) which is more than fifty years old from the date of its registration and is being driven for
taking part in a vintage car rally:
Provided that where a motor vehicle can no longer remain under the effective control of the
person driving, the same shall not be used in a public place except by towing.
____________________________________
1. Inserted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
69
1[Explanation.—For the purposes of this rule, "motor vehicle" includes construction
equipment vehicle.]
2[(3) Testing of components conforming to standards in lieu of Indian Standards: Whenever
a part, component or assembly is used in a vehicle complying with standards in lieu of those
notified in these rules such as an international standard (for example, EEC/ECE/IEC/ISO or such
other standards) or a foreign national standard, permission for use of such parts, component or
assembly complying with such standards shall be approved by the Central Government.
In such cases, the compliance of parts, components or assemblies to such international or
foreign national standards will be established for the purpose of rule 126, by a certificate of
compliance issued by an authorized certifying agency or by an accredited certifying agency of the
country of origin for such international or foreign national standards and vetted by a testing agency
as referred to in rule 126.]
93. Overall dimension of motor vehicles
(1) The overall width of a motor vehicle, measured at right angles to the axis of the motor
vehicle between perpendicular planes enclosing the extreme points, 3[shall not exceed 2.6 metres.]
4[* * *]
[* * *]
Explanation.—For purposes of this rule, a rear-view mirror, or guard rail or a direction
indicator 5[rub-rail (rubber beading) having maximum thickness of 20 mm on each side of the body]
shall not be taken into consideration in measuring the overall width of a motor vehicle.
6[(1-A) The overall width of a construction equipment vehicle, measured at right angles to the axis
of the construction equipment vehicle between perpendicular planes enclosing the extreme points,
shall not exceed 3 metres while in the travel mode and such construction equipment vehicle 7[shall
be painted by yellow and black zebra stripes on the portion of the width that exceeds 2.6 metres] on
the front and rear sides duly marked for night time driving/parking suitably by red lamps at the front
and rear:]
8[Provided that the zebra stripes need not be used on attachments.]
9[(2) The overall length of a motor vehicle other than a trailer shall not exceed—
___________________________________________
1. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
2. Inserted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999).
3. Substituted by G.S.R. 221(E), dated 28-3-2001, for “shall not exceed” (w.e.f. 28-3-2001).
4. Cls. (i) and (ii) omitted by G.S.R. 221(E), dated 28-3-2001 (w.e.f. 28-3-2001).
5. Substituted by G.S.R. 221(E), dated 28-3-2001, for “(when in operation)” (w.e.f. 28-3- 2001).
6. Inserted by G.S.R. 642(E), dated 28-7-2000 (w.e.f. 28-7-2000).
7. Substituted by G.S.R. 116(E), dated 27-2-2002, for “shall be painted for the entire with by yellow
and black zebra stripes” (w.e.f. 27-8-2002).
8. Inserted by G.S.R. 116(E), dated 27-2-2002 (w.e.f. 27-8-2002).
9. Sub-R. (2) substituted by G.S.R. 221(E), dated 28-3-2001 (w.e.f. 28-3-2001).
70
(i) in the case of motor vehicle other than transport vehicle having not more than two axles, 6.5
metres;
(ii) in the case of transport vehicle with rigid frame having two or more axles, 12 metres;
(iii) in the case of articulated vehicles having more than two axles, 16 metres;
(iv) in the case of truck-trailer or tractor-trailer combination, 18 metres;
(v) in the case of 3 axle passenger transport vehicles, 15 metres;
(vi) in the case of single articulated (vestibule type) passenger transport vehicle, 18 metres
(Please see the conditions given in note below);
(vii) in the case of double articulate passenger transport vehicles, 25 metres (Please see the
conditions given in note below).
Note.—In the case of single articulated passenger transport vehicles of 18 metres length and
double articulated passenger transport vehicles upto 25 metres, permission of the State Government
shall be obtained regarding their plying on selected routes depending upon local road conditions,
width, maneuverability of the vehicle in traffic, as deemed fit. These passenger transport vehicles
will also be required to have a closed circuit TV system for proper visibility in and around the
passenger transport vehicle by the driver to maintain safety. Intercom system shall also be provided
in such passenger transport vehicle. In addition, the standing passenger will be allowed only on the
lower deck of double articulated passenger transport vehicle.]
(3) In the case of an articulated vehicle or a tractor-trailer combination specially constructed and
used for the conveyance of individual load of exceptional length,—
(i) if all the wheels of the vehicle are fitted with pneumatic tyres, or
(ii) if all the wheels of the vehicle are not fitted with pneumatic tyres, so long as the vehicle is
not driven at a speed exceeding twenty-five kilometers per hour, the overall length shall not
exceed 18 metres.
Explanation.—For the purposes of this rule “overall length” means the length of the vehicle
measured between parallel planes passing through the extreme projection points of the vehicle
exclusive of—
(i) a starting handle;
(ii) any hood when down;
(iii) any fire-escape fixed to a vehicle;
(iv) any post office letter-box, the length of which measured parallel to the axis of the vehicle,
does not exceed 30 centimeters;
(v) any ladder used for loading or unloading from the roof of the vehicle or any tail or indicator
lamp or number plate fixed to a vehicle;
71
(vi) any spare wheel or spare wheel bracket or bumper fitted to a vehicle;
(vii) any towing hook or other fitment which does not project beyond any fitment covered by
clauses (iii) to (vi).
1[(3-A)The overall length of the construction equipment vehicle, in travel shall not exceed 12.75
metres:
Provided that in the case of construction equipment vehicle with more than two axles, the
length shall not exceed 18 metres.
Explanation.—For the purposes of this sub-rule "overall length" means the length of the
vehicle measured between parallel planes through the extreme projection points of the vehicle,
exclusive of—
(i) any fire-escape fixed to a vehicle;
(ii) any ladder used by the operator to board or alight the vehicle;
(iii) any tail or indicator lamp or number plate fixed to a vehicle;
(iv) any sphere wheel or sphere wheel bracket or bumper fitted to a vehicle;
(v) any towing hook or other fitments;
(vi) any operational attachment on front, rear or carrier chassis of construction equipment
vehicle in travel mode.]
(4) The overall height of a motor vehicle measured from the surface on which the vehicle rests,—
(i) in the case of a vehicle other than a double-decked 2[transport vehicle], shall not exceed 3.8
metres;
3[(ii) in the case of a double decked transport vehicle, shall not exceed 4.75 metres;
(ii-a) in the case of tractor-trailer goods vehicle, shall not exceed 4.20 metres;]
4[(iii) in the case of a laden trailer carrying ISO series 1 Freight Container, or in the case of
fabricated containerised motor vehicle, shall not exceed 4.52 meters.]
Provided that the provisions of clauses (i) to (iii) shall not apply to fire-escape tower wagons
and other special purpose vehicles exempted by genera! or special order of registering authority.
___________________________________________
1. Inserted by G.S.R 642(E),dated 28-7-2000 (w.e.f. 28-7-2000).
2. Substituted by G.S.R. 589(E), dated 16-9-2005, for “motor vehicle” (w.e.f. 16-9-2006).
3. CI. (ii) substituted by G.S.R. 589(E),dated 16-9-2005(w.e.f. 16-9-2006).
4. Subs by G.S.R. 276€, dated 10th April,2007 (w.e.f. 10-4-2007)
72
1[(7-A) No part of the construction equipment vehicle in travel mode other than a direction
indicator, or a driving mirror, shall project laterally more than 300 millimetres beyond the extreme outer
edge of the tyres or wheel drums regardless of single or dual tyres or rollers.]
2[(8)] No motor vehicle shall be loaded in such a manner that the load or any part thereof
extends,—
(i) laterally beyond the side of the body;
(ii) to the front beyond the foremost part of the load body of the vehicle;
(iii) to the rear beyond the rear most part of the vehicle;
(iv) to a height beyond the limits specified in sub-rule (4):
Provided that clause (iii) shall not apply to a goods carriage when loaded with any pole or rod or
indivisible load so long as the projecting part or parts do not exceed the distance of one metre beyond the
rear most point of the motor vehicle.
3[ 93 A. Overall dimension for agricultural tractors
(1) The overall width of the agricultural tractor shall not exceed 2.6 metres.
(2) The overall length of the agricultural tractor shall not exceed 6.5 metres.
(3) The overall height of the agricultural tractor shall not exceed 3.8 metres.
(4) The overhang of the agricultural tractor shall not exceed 1.85 metres:
Provided that lateral projection upto 700 millimetres beyond the central line of the rear wheel
shall be permitted.]
Previous and next
Questions people ask
Is rule 90 of THE CENTRAL MOTOR VEHICLES RULES, 1989 still in force?
No repeal of the CENTRAL MOTOR VEHICLES RULES, 1989 is recorded.