Rule 73H, The Factory rules 1962: Railways in factories
The Factory rules 1962 - Rule 73H
Text of rule 73H
Railways in factories
73H. Railways in factories. - (1) This rule shall apply to railways in the precincts of a
factory which are not subject to Indian Railways Act, 1890.
(2) Gateways. - A gateway through which a railway track passes shall not be used for
the general passage of workers into or out of a factory.
(3) Barriers and Turngate. - (a) Where building or walls contain doors or gates which
open to a railway track, a barrier about 1 metre high shall be fixed parallel to and
about 60 cm. away from the building or wall outside the opening and extending
several feet beyond it at either end, so that any person passing out may become
aware of an approaching train when his pace is checked at the barrier.
If the traffic on the nearest track is all in one direction, the barrier shall be in the form
of an "L" with the end of the short leg abutting on to the wall and other end opening
towards the approaching train.
(b) If the distance between wall and track cannot be made to accommodate such a
barrier, the barrier or a turngate shall be placed at the inside of the opening.
(c) Where a footway passes close to a building or other obstruction as it approaches a
railway track, a barrier or a turngate shall be fixed in such a manner that a person
approaching the track is compelled to move away from the building or obstruction and
thus obtain timely sight of an approaching locomotive or wagon.
(4) Crowds. - (a) Worker's pay-windows, first-aid stations and other points where a
crowd may collect shall not be placed near a railway track.
(b) At any time of the day when workers are starting or ending work, all railway traffic
shall cease for not less than five minutes.
(5) Locomotives. - (a) No locomotive shall be used in shunting operations unless it is
in good working order.
(b) Every locomotive and tender shall be provided with efficient breaks all of which
shall be maintained at suitably fixed intervals and those that are worn out be replaced
at once.
(c) Water-guage glasses of every locomotives, whatever its boiler pressure, shall be
protected with substantial glass or metal screen.
(d) Suitable steps and hand-holes shall be provided at the corners of the locomotive
for the use of shunters.
(e) Every locomotive crane shall be provided with lifting and jacking pads at the four
corners of the locomotive for assisting in re-railing operations.
(f) It shall be clearly indicated on every locomotive crane in English and in language
understood by the majority of the workers in the factory, for what weight of load and of
what radius the crane is safe.
(6) Wagons. - (a) Every wagon (and passenger coach if any) shall be provided either
with self-acting brakes capable of being applied continuously or with efficient hand
brakes which shall be maintained in good working order. The hand brakes shall be
capable of being applied by a person on the ground and fitted with a device for
retaining them in the applied position.
(b) No wagon shall be kept standing within 3 metres of any authorised crossing.
(c) No wagon shall be moved with the help of crowbars or pinch bars.
(7) Riding on locomotive, wagon or other rolling stock. - No person shall be
permitted to be upon (whether inside or outside) any locomotive, wagon or after rolling
stock except where secure foothold and handhold are provided.
(8) Attention to brakes and doors. - (a) No locomotive, wagon or other rolling stock
shall be kept standing unless its brakes are firmly applied and, where it is on a
gradient, without sufficient number of properly constructed sections placed firmly in
position.
(b) No train shall be set in motion until the shunting jamadar has satisfied himself that
all wagon doors are securely fastened.
(9) Projecting loads and cranes. - (a) If the load on a wagon projects beyond its
length, a guard or dummy-truck shall be used beneath the projection.
(b) No loco-crane shall travel without load unless the jib is completely lowered and
positioned in line with the track.
(c) When it is necessary for a loco-crane to travel with a load, the jib shall not be
swung until the loco-crane has come to rest.
(10) Loose-shunting. - Loose-shunting shall be permitted only when it cannot be
avoided. It shall never be performed on a wagon not accompanied by a man capable
of applying and pinning down the brakes. A wagon not provided with brakes in good
working order and capable of being easily pinned down shall not be loose- shunted
unless there is attached to it at least another wagon with each brakes. Loose-shunting
shall not be performed with, or against a wagon containing passengers, live-stock or
explosives.
(11) Fly-shunting. - Fly-shunting shall not be permitted on any factory railway.
(12) The shunting jamadar. - (a) Every locomotive or wagon in motion in a factory
shall be in charge of a properly trained jamadar.
(b) Before authorising a locomotive or wagon to be moved, the shunting jamadar shall
satisfy himself that no person is under or in between or in front of the locomotive or
wagon.
(13) Hand signals. - The hand signals used by the shunting jamadar by day and night
shall be those prescribed by the shunting rules of railways, working under the Indian
Railways Act, 1890 (IX of 1890).
(14) Night work and fog. - (a) In factories where persons work at night, no movement
of locomotive, wagon or other rolling stock otherwise than by hand shall be permitted
between sunset and sunrise unless the tracks and their vicinity are lighted on a scale
of not less than 10 lux as measured at the horizontal plane at the ground level.
(b) In no circumstances shall any locomotive or train be moved between sunset and
sunrise or at any time when there is fog, unless it carries a white head light and a red
rear light.
(15) Speed control. - (a) Locomotive or train shall not be permitted to moves at a
speed greater than seven kilometres per hour.
(b) A train, locomotive, wagon or other rolling stock shall not be moved by a
mechanical or electrical power unless it is proceeded at a distance of not less than 10
metres during the whole of its journey by a shunting jamadar. He shall be provided
with signalling flags or lamp and whistle necessary for calling the attention of the
driver.
(16) Tracks. - (a) The distance (i) between tracks and (ii) between tracks and
buildings, blind walls or other structure and (iii) tracks and materials deposite on the
ground shall be respectively not less than-
(aa) from centre to centre of parallel tracks, the overall width of the widest wagon of
that guage plus twice the width of the door of such a wagon when opened directly
outward plus 1 metre;
(bb) from a building or structure other than a leading platform to the centre of the
nearest track, half the overall width of the widest wagon of that guage, plus the width
of its door when opened outward, plus 1.5 metres;
(cc) from material stacked or deposited alongside the track, on the ground or on a
loading platform to the centre of the nearest track, half the overall width of the widest
wagon of that guage, plus half the width of its door when opened directly outward,
plus 1 metre.
(b) Sleepers of a track shall be in level width the ground and at the crossings of the
track with a road or walkway, surface or the road of walkway shall be in level with the
top of the rails.
(c) All track ends shall be equipped with buffer stops of adequate strength.
(d) Barriers of substantial construction shall be securely and permanently fixed across
any doorway or gateway in a building or in a wall which conceals an approaching train
front view, between the building and the track as prescribed in clause (a) of sub-rule
(3).
(e) Where track are carried on a gantry another elevation, a safe footway or footways
with hand rails and toe-bards shall be provided at all position where persons work or
pass on foot; and where there is an opening in the stage of an elevated track for the
dropping of material to a lower level the position shall be adequately fenced or the
opening itself provided with a grill through which a person cannot fall.
(f) All point levers shall have their movements parallel to, not a cross, the direction of
the track.
(g) All loading platforms which are more than 60 cm. above the level of the ground on
which the track is laid and more than 15 metres in length, shall be provided with stops
at intervals not greater than 15 metres apart to enable the platform to be easily
mounted from the track.
(h) Turn tables on plant railways shall be provided with locking devices which will
prevent the tables from turning while locomotive or wagons are being run on or off the
tables.
(i) Workers shall be prohibited from passing under, between or above railway wagons.
(17) Crossings. - (a) At all crossings of a track with a road or walkway, danger or
crossing signs and wherever reasonably practicable, blinking lights shall be provided.
At all important crossing gates or barriers manned by watchmen shall be provided.
Swinging gates and barriers shall be secured against inadvertent opening or closing.
(b) All crossings, warning signs, gates and barriers shall be illuminated during hours
of darkness.
(18) Duties of drivers and shunters. - It shall be the duty of every driver of a
locomotive, or a shunter including a shunting jamadar to report without delay to their
superior any defeet in permanent way, locomotive or rolling stock.
(19) Young person not to be employed as drivers of locomotive or as shunters. -
No person who is under 18 years of age and no person who is not sufficiently
competent and reliable shall be employed as a driver of a locomotive or as a shunter.
(20) The Chief Inspector may by an order in writing exempt a factory or part of it from
all or any of the provisions of this rule to such extent and on such conditions as he
deems necessary.
Previous and next
Questions people ask
Is rule 73H of the Factory rules 1962 still in force?
No repeal of the Factory rules 1962 is recorded.