Rule 73G, The Factory rules 1962: Reaction vessels and kettles
The Factory rules 1962 - Rule 73G
Text of rule 73G
Reaction vessels and kettles
73G. Reaction vessels and kettles. - (1) This rule applied to reaction vessels and
kettle have in referred to as reaction vessels, which normally work at a pressure not
above the atmospheric pressure but in which there is likelihood of pressure being
created above the atmospheric pressure due to reaction getting out of control or any
other circumstances.
(2) In the event of the vessel being heated by electrical means, a suitable thermostatic
control device shall be provided to prevent the temperature exceed the safe limit.
(3) Where steam is used for heating purpose in a reaction vessel, it shall be supplied
through a suitable automatic device to prevent the maximum permissible steam
pressure being exceeded, unless the pressure of the steam in the supply line itself
cannot exceed the said maximum permissible pressure.
(4) A suitable safety valve or rupture disc of adequate size and capacity shall be
provided to effectively prevent the pressure being buildup in the reacting vessel
beyond the safe limit. Effective arrangements shall be made to ensure that the
released gases, fumes, vapours, liquids or dusts, as the case may be, are led away
and disposed of through suitable pipes without causing any hazard. Where flammable
gases or vapours are likely to be vented out from the vessel the discharge valve shall
be provided with a flame arrestor.
(5) Every reaction vessel shall be provided with a pressure guage having the
appropriate range.
(6) In addition to the devices as mentioned in the foregoing provisions, means shall be
provided for automatically stopping the feed into the vessel as soon as process
condition deviate from the normal limits to an extent which can be considered as
dangerous.
(7) Wherever necessary, an effective system for cooling, flooding or blanking shall be
provided, for the purpose of controlling the reaction and process condition within the
safe limit of temperature and pressure.
(8) An automatic auditory and visual warning shall be given whenever process
conditions exceed the present limits. This device, wherever possible, shall be
integrated with automatic process correction systems.
(9) A notice pointing out the possible circumstances in which pressure above
atmospheric pressure may be buildup in the reaction vessel, the danger involved and
the precautions to be taken by the operators shall be displayed at a conspicuous
place near the vessel.
Previous and next
Questions people ask
Is rule 73G of the Factory rules 1962 still in force?
No repeal of the Factory rules 1962 is recorded.