LawGrids logoLAWGRIDS.ORG

Rule 65D, Rajasthan Factories Rules,1951: Building and structure

Rajasthan Factories Rules,1951 - Rule 65D

Text of rule 65D

Building and structure

65D. Building and structure. — No building, wall, chimney, bridge, tunnel, road, gallery, stairway, ramp, floor, platform, staging, or other structure, whether of a permanent or temporary character, shall be constructed, situated or maintained in any factory in such a manner as to cause risk of bodily injury. 65-E. Machinery and Plant. — No machinery, plant or equipment shall be constructed, situated, operated or maintained in any factory in such a manner as to cause risk of bodily injury. --------------------------------------------------------------------------------------------------------------------- @. Inserted vide Notification No.F. 1(2)/8/Shram/68. dated 30.1.1971; #. Inserted vide notification F. 1(2)/8/Lab. 68. dated 6.8.74 65-F. Methods of work. — No process or work shall be carried on in any factory in such a manner as to cause risk of bodily injury. 65-G. Stacking and storing of materials, etc. — No materials or equipment shall be stocked or stored in such a manner as to cause risk of bodily injury. #[65-H. Electricity Rules.] xxxx- @[65-H. Examination of eye sight of certain workers.]— (1) No person shall be employed to operate a crane, locomotive or fork- lift truck, or to give signals to a crane or locomotive operator unless his eye sight and colour vision have been examined and declared fit by a qualified ophthalmologist to work whether with or without the use of corrective glasses. (2) The eye sight and colour vision of the person employed as referred to in clause (1) shall be examined at least once in every period of 12 months up to the age of 45 years and once in every 6 months beyond that age. (3) Any fee payable for an examination of a person under this sub-rule shall be paid by the occupier and shall not be recoverable from that person. (4) The record of examination or re-examination carried out as required under sub-rule (1) shall be maintained in form 35.] @[65-I. Railways in factories.— (1) This rule shall apply to railways in the precincts of a factory which are not subject to Indian Railways Act, 1890. (2) Gateways.— A gateway through which a railway track passes shall not be used for the general passage of workers into or out of a factory. (3) Barriers and Turngates.— (a) Where building or walls contain doors or gates which open to railway track, a barrier about 1 meter high shall be fixed parallel to and about 60 cm. away from the building or wall outside the opening and extending several feet beyond it at either end, so that any person passing out may become a ware of an approaching train when his pace is checked at the barrier. If the traffic on the nearest track is all in one direction, the barrier shall be in the form of on "L" with the end of the short leg abutting on to the wall and the other and opening towards the approaching train. (b) If the distance between wall and track cannot be made to accommodate such a barrier, the barrier or a turn-gate shall be placed at the inside of the opening. (c) Where a footway passage close to a building or other obstruction as it approaches a railway track, a barrier or a turn-gate shall be fixed in such a manner that a person approaching the track is compelled to move away from the building or obstruction and thus obtain timely sight of an approaching locomotive or wagon. (4) Crowds.— (a) Workers pay-window, first aid stations and other points where a crowd may collect shall not be placed near a railway track. (b) At any time of the day when workers are starting or ending work, all railway traffic shall cease for not less than five minutes. --------------------------------------------------------------------------------------------------------------------- #. Deleted vide Notification No. @. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992- (5) Locomotives.— (a) No locomotive shall be used in shunting operations unless it is in good working order. (b) Every locomotive and tender shall be provided with efficient brakes, all of which shall be maintained in good working order. Brake shoes shall be examined at suitably fixed intervals and those that are worn out replaced at once. (c) Water-gauge glasses of every locomotive, whatever its boiler pressure, shall be protected with substantial glass or metal screens. (d) Suitable steps and hand-holds shall be provided at the corners of the locomotive for the use of shunters. (e) Every locomotive crane shall be provided with lifting and jacking pads at the four corners of the locomotive for assisting in re-railing operations. (f) It shall be clearly indicated on every locomotive crane in English and in language understood by the majority of the workers in the factory, for what weight of load and at what radius the crane is safe. (6) Wagons.— (a) Every wagon (and passenger coach, if any) shall be provided either with self-acting brakes capable of being applied continuously or with efficient hand brakes which shall be maintained in good working order. The hand brakes shall be capable of being applied by a person on the ground and fitted with a device for retaining them in the applied position. (b) No wagon shall be kept standing within 3 metres of any crossing. (c) No wagon shall be moved with the help of crowbars or pinch bars. (7) Riding on locomotive, wagon or other rolling stock.— No person shall be permitted to be upon (Whether inside or outside) any locomotive, wagon or after rolling stock except where secure foothold and handhold are provided. (8) Attention to brakes and doors.— (a) No locomotive, wagon or other rolling stock shall be kept standing unless its brakes are firmly applied and, where it is on a gradient, without sufficient number of properly constructed scotches placed firmly in position. (b) No train shall be set in motion until the shunting jamadar has satisfied himself that all wagon doors are securely fastened. (9) Projecting loads and cranes.— (a) If the load on a wagon projects beyond its length, a guard or dummy truck shall be used beneath the projection. (b) No loco-crane shall travel without load unless the jib is completely lowered and positioned in line with track. (c) When it is necessary for a loco-crane to travel with a load, the jib shall not be swing until the loco-crane has come to rest. (10) Loose-Shunting.— Loose shunting shall be permitted only when it cannot be avoided it shall never be performed on a wagon not accompanied by a man capable of applying and pinning down the brakes. A wagon not provided with brakes in good working order and capable of being easily pinned down shall not be loose- shunted unless there is attached to it at least another wagon with such brakes. Loose shunting shall not be performed with, or against a wagon containing passengers, livestock or explosives. (11) Fly-shunting.— Fly-shunting shall not be permitted on any factory railway. (12) The shunting Jamadar.— (a) Every locomotive or wagon in motion in a factory shall be in-charge of a properly trained Jamadar @[xxx} . ----------------------------------------------------------------------------------------------------------------------- @Deleted vide notification No. F3(1)legal/F&B/2015 dated 2.11.2015 (b) Before authorising a locomotive or wagon to be moved, the shunting jamadar shall satisfy himself that no person is under or in-between or in front of the locomotive or wagon. (13) Hand signals.— The hand signals used by the shunting jamadar by day and night shall be those prescribed by the shunting rules of railway, working under the Indian Railway Act (IX of 1890). (14) Night work and fog.— (a) In factories where persons work at night, no movement of locomotive, wagon or other rolling stock otherwise than by hand shall be permitted between sun-set and sun-rise unless the tracks and their vicinity are lighted in a scale of not less than 10 lux as measured at the horizontal plane at the ground level. (b) In no circumstances shall any locomotive or train be moved between sun-set and sun-rise or at any time when there is fog, unless it carries a white head light and a red rear light. (15) Speed control.— (a) locomotive or train shall not be permitted to move at a speed greater than seven kilometers per hours. (b) A train, locomotive, wagon or other rolling stock shall not be moved by mechanical or electrical power unless it is proceeded at a distance of not less than 10 meters during the whole of its journey by a shunting jamadar. He shall be provided with signalling flags or lamp and whistle necessary for calling the attention of the driver. (16) Tracks.— (a) The distance (I) between tracks and (ii) between tracks and building, blind walls or other structures and (iii) tracks and materials deposited on the ground shall be respectively not less than. (aa) from centre to centre of parallel tracks, the overall width of the widest wagon of that gauge plus twice the width of the door of such a wagon when opened directly outward plus 1 meter. (bb) from a building or structure other than a loading platform to the centre of the nearest track, half the overall width of the widest wagon of that gauge, plus the width of its door when opened outward, plus 1.5 metres. (cc) from material stocked or deposited alongside the track, on the ground or on a loading platform to the centre of the nearest track, half the over all width of the widest wagon of that gauge, plus half of its door when opened directly outward, plus 1 meter. (b) Sleepers of a track shall be in level with the ground and at the crossings of the track with a road or walkaway, the surface of the road or walkaway shall be in level with the top of the rails. (c) All track ends shall be equipped with buffer stops of adequate strength. (d) Barriers of substantial construction shall be securely and permanently fixed across any doorway or gateway in a building or in a wall which conceals an approaching train from view, between the building and the track as prescribed in clause (a) of sub- rule (3). (e) Where tracks are carried on a gantry or other elevation, a safe footway or foot ways with hand rails and toe-boards shall be provided at all positions where persons work or pass on foot. and where there is an opening in the stage of an elevated track for dropping of material to a lower level, the position shall be adequately fenced or the opening itself provided with a grill through which a person cannot fall. (f) All point levers shall have their movements parallel to, not across the direction of the track. (g) All loading platforms which are more than 60 cm. above the level of the ground on which the track is laid and more than 15 meters in length, shall he provided with stops at intervals not greater than 15 meters apart to enable the platform to be easily mounted from the track. (h) Turn tables on plant railways shall be provided either locking devices which will prevent the table from turning while locomotives or wagons are being turn on or off the tables. (1) Workers shall be prohibited from passing under, between or above railway wagons. (17) Crossings.— (a) At all crossings of a track with a road or walkaway, danger or crossing signs and wherever reasonably practicable. blinking lights or alarm lights shall be provided at all important crossings, gates or barriers manned by watchmen shall be provided. Swinging gates and barriers shall be secured against inadvertent opening or closing. (b) All crossings, warning signs, gates and barriers shall be illuminated during hours of darkness. (18) Duties of drivers and shunters.— It shall be the duty of every driver of a locomotive, or a shunter including a shunting jamadar. to report without delay to their superior any defect in permanent way, locomotive or rolling stock. (19) Young persons not to be employed as drivers of locomotive or as shunters.— No person who is under 18 years of age and no person who is not sufficiently competent and reliable shall be employed as a driver of a locomotive or as a shunter. (20) The Chief Inspector may by an order in writing exempt a factory or part of its from all or any of its form all or any of the provisions of this rule to such an extent and on such conditions as he deems necessary.] @[65-J. Safety committee.— (1) In every factory wherein more than 50 workers are ordinarily employed and— (a) Which carries on any process or operation declared to be dangerous under Section 87 of the Act; or (b) Which carries on 'hazardous process' as defined under Section 2(cb) of the Act. There shall be a Safety Committee. (2) The safety committee should have equal representatives of management and workers and should consists of not less than 2 and not more than 6 members from each side depending upon the size of the factory. The management representatives shall include a senior officer who is in position to contribute effectively to the functioning of the committee, and shall be chairman of the committee. (3) The workers' representatives on this committee shall be elected by the entire body of workers. The elections for this purpose shall be held by the management within 30 days of occurring of such vacancy on committee. (4) The tenure of the committee shall be three years. ------------------------------------------------------------------------------------------------------------------------- @. Substituted vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992 (5) Safety committee shall meet as often as necessary but at least once in every quarter. The minutes of the meeting shall be recorded and produced to the Inspector on demand. (6) Functions and duties of the Safety Committee may include— (a) assisting and co-operating with the management in achieving the aims and objectives outlined in the 'Health and Safety Policy of the occupier; (b) dealing with all matters concerning health, safety and environment and to arrive at practicable solutions to problems encountered; (c) creating safety awareness amongst all workers; (d) undertaking educational. training and promotional activities; (e) discussing reports on safety, environmental and occupational health surveys, safety, audits, risk assessment, emergency and disaster management plans and implementation of the recommendations made in the reports; (f) carrying out health and safety surveys; (g) looking into any complaint made on the likelihood of an imminent danger to the safety and health of the workers and suggesting corrective measures; and (h) reviewing the implementation of the recommendations made by it; (i) suggesting ways & means to avoid reoccurrence of accidents. (7) Where owing to the size of the factory, or any other reason, the functions referred to in sub-rule (6) cannot be effectively carried out by the Safety Committee, it may establish sub- committees as may be required to assist it.] @[65-K. Quality of personal protective Equipments.— All personal protective Equipments provided to workers as required under any of the provisions of the Act or the Rules shall conform to the relevant Indian Standards.] @[65-L. Protective Equipment.— The Inspector may having regard to the nature of the hazards. involved in work and process being carried out, order the occupier or the manager in writing to supply to the workers exposed to particular hazard any personal protective equipment as may be found necessary.] #[65-LL Thermic fluid heaters.— (1) All heaters shall be of such construction that coils are removable for periodic cleaning, visual inspection and pressure test. (2) Suitable arrangements shall be made for continuous flow of thermic fluid effectively in case of power failure. (3) Before restarting the furnace, it shall be effectively purged. (4) Velocity of flow of the thermic fluid shall not be allowed to fall below the minimum recommended by the manufacturers while the heater is in operation. (5) The thermic fluid shall be circulated in a closed circuit formation with an expansion cum deaerator tank. This tank shall be located outside the shed, where the heater is installed. (6) Every heater shall be provided with a Photo-resistor or u, v. detector actuated audio- visual alarm to indicate flame failure and automatic burner cut off. Audio-visual alarm so provided shall be properly maintained in a working condition. ------------------------------------------------------------------------------------------------------------------------ @. Substituted vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992 #. Inserted vide Notification No F3(1)legal/F&B/2001/5584 dated 8.8.2002; published in Rajasthan Gazette Extraordinary, Part 4(Ga)(1), dated 13.8.2002 (7) The Stack temperature monitor-cum-controller with audio-visual alarm shall be provided so as to warn the operator in case the outlet temperature exceeds the specified temperature. (8) Where inspection doors are provided on the furnace they shall be inter locked with the burner itself so that they cannot be opened until burner is shut off and furnace is cooled sufficiently. (9) All heaters shall be provided with the following safety devices:— (a) level gauge and control switch in the expansion tank, (b) temperature control of thermic fluid, (c) differential pressure switch between the outlet and inlet line of the heater tubes, and (d) temperature control device for the fuel oil supply to the burner. (10) All devices mentioned in sub-rule 9 shall have interlocking arrangements with burner so that in case of any predetermined limits being crossed the supply of fuel and air to burner shall automatically be cut-off. (11) All safety interlocks when operated shall be indicated on the control panel of the heater by a suitable audio-visual alarm. (12) Every heater unit shall be provided as a standard accessory. An arrangement for suiffing with low pressure steam or nitrogen or carbon-di-oxide for putting out the fire and connection point shall be provided on the heater unit for such arrangement. (13) Electric panel for the heater shall be located near the heater but not so close as to be exposed to spilling or leaking oil. (14) The heater shall be located in a place segregated from other manufacturing activities. (15) Explosion vent shall be so installed that release takes place at safe location. (16) The heater coil shall be subjected to pressure test by competent person once at-least in every 12 months. The test pressure shall not be less than 1.5 times the operating pressure. (17) If repairs are carried out to the coil, it shall be pressure tested at 1.5 times the operating pressure before taking it into use. (18) The thermic fluid shall conform to the specifications prescribed by the manufacturers and shall be tested by a competent person for suitability at least once in every three months period. Such test shall include test for acidity, suspended matter, ash contents, viscosity and flash point. The test reports shall be produced on demand to the Factory Inspector. (19) Cleaning of the internal surface of the heater or soot and check up of refractory surface on the inside shall be carried out every month or as often as required depending upon working conditions. The coils shall be removed and surface of the coils cleaned thoroughly once at least in a period of six months. The burner, nozzles, oil filters and pumps shall be cleaned once a week during the period of use. (20) A separate register containing the following information shall be maintained,— (a) weekly checks carried out confirming the effectiveness of the inter lock, (b) weekly checks confirming that all accessories are in good stage of repairs, and (c) information regarding fuel oil temperature, pressure, thermic fluid inlet/outlet pressure and temperature, fuel gas, temperature, recorded at 4 hourly interval. (21) The heater when in operation shall always be kept in charge of a trained operator.] @[65-M. xxx #[65-MM. Health and Safety policy.— (1) In every factory:— (a) Wherein more than 100-workers are ordinarily employed. (b) Which carries on any process or operation declared to be dangerous under Section 87 of the Act and employing more than 50 workers or (c) Which carries on 'hazardous process' as defined under section 2(cb) of the Act and employing more than 50 workers. The occupier shall prepare a written statement of his policy in respect of health and safety of workers at work. (2) Notwithstanding anything contained in sub-rule (1), the Chief Inspector may require the occupiers of any of the factory or class or description of factories to comply with the requirements of sub- rule (1), if, in his opinion, it is expedient to do so. (3) The Health and Safety policy should contain or deal with. (a) declared intention and commitment of the top management to health, safety and environment and compliance with all the relevant statutory requirements; (b) organisational set up to carry out the declared policy clearly assigning the responsibility at different levels; and (c) arrangements for making the policy effective. (4) In particular, the policy should specify the following: (a) arrangements for involving the workers; (b) intention of taking into account the health and safety performance of individuals at different levels while considering their career advancement; (c) fixing the responsibility of the contractors, sub-contractors, transporters and other agencies entering the premises; (d) providing a resume of health and safety performance of the factory in its Annual Report; (e) relevant techniques and methods, such as safety audits and risk assessment for periodical assessment of the status on health, safety and environment and taking all the re-medical measures; (f) stating its intentions to integrate health and safety, in all decisions including those dealing with purchase of plant, equipment, machinery and material as well as selection and placement of personnel; (g) arrangements for informing, educating and training and retraining its own employees at different levels and the public wherever required; (h) obligations of worker for promoting health and safety. -------------------------------------------------------------------------------------------------------------------------- @ Deleted #. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. (5) A copy of the declared Health and Safety Policy signed by the occupier shall be made available to the Inspector having jurisdiction over the factory and to the Chief Inspector. (6) The policy shall be made widely known by— (a) displaying copies of the policy at conspicuous places and making copies of the policy available to worker on demand; and (b) any other means of communication, in a language under-stood by majority of workers. (7) The occupier shall revise the safety policy as often as may be appropriate, but it shall necessary be revised under the following circumstances: (a) whenever any expansion or modification having implications on safety and health of persons at work is made; or (b) whenever new substance (s) or articles are introduced in the manufacturing process having implications on health and safety of persons exposed to such substances.] @[65-N. Collection and development and dissemination of information.— (1) The occupier of every factory carrying on a 'hazardous process' shall arrange to obtain or develop information in the form of Material Safety Data Sheet (MSDS) in respect of every hazardous substance or material handled in the manufacture, transportation and storage's in the factory. It shall be accessible upon request to a worker for reference. (a) Every such Material Safety Data Sheet shall include the following information: (i) The identity used on the label; (ii) Hazardous ingredients of the substance; (iii) Physical and chemical characteristics of the hazardous substance; (iv) The physical hazards of the hazardous substance, including the potential for fire, explosion and reactivity; (v) The health hazards of the hazardous substance including signs symptoms of exposure, and any medical conditions which are generally recognised as being aggravated by exposure to the substance; (vi) The primary route (s) of entry; (vii) The permissible limits of exposure prescribed in the second Schedule under Section 41F of the Act, and in respect of a chemical not covered by the said Schedule, any exposure limit used or recommended by the manufacturer, importer or occupier; (viii) Any generally applicable precautions for safe handling and use of the hazardous substance, which are known, including appropriate hygienic practices, protective measures during repairs and maintenance of contaminated equipment, procedures for clean-up of spills and leaks; (ix) Any generally applicable control measures, such as appropriate engineering controls, work practices, or use of personal protective equipment; (x) Emergency and first-aid procedures; (xi) The date of preparation of the Material Safety Data Sheet, or the last change to it; and -------------------------------------------------------------------------------------------------------------------------- @ . Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992 (xii) The name, address and telephone number of the manufacturer, importer, occupier or other responsible party preparing or distributing the Material Safety Data Sheet, who can provide additional information on the hazardous substance and appropriate emergency procedure if necessary. (b) The occupier while obtaining or developing a Material Safety Data Sheet in respect of a hazardous substance shall ensure that the information recorded accurately reflects the scientific evidence used in making the hazard determination. If he becomes newly aware of any significant information regarding the hazards of a substance, or ways to protect against the hazards, this new information shall be added to the Material Safety Data Sheet as soon as practicable. (c) Any example of such Material Safety Data Sheet is given in the schedule to this Rule. 2. Labelling. — Every container of a hazardous substance shall be clearly labelled or marked to identify; (a) the contents of the container; (b) the name and address of the manufacturer or importer of the hazardous substance; (c) the physical and health hazards; and (d) the recommended personal protective equipment needed to work safely with the hazardous substance.] @[Schedule (Substituted vide Notification No F3(1)legal/F&B/2001/5584 dated 8.8.2002; published in Rajasthan Gazette Extraordinary, Part 4(Ga)(1), dated 13.8.2002) Format of a Safety Data Sheet 1. Identity of material Production Name Chemical Designation Trade Name Synonyms Formula Label Class Category C.A S. No U.N. No.: Regulated Identification Shipping Name Codes/Label Hazardous Waste Identification Number Hazchem Code Hazardous Ingredients C.A.S No.: 1. 2. 3. 4. 2. Physical and chemical properties Physical State Vapour (Gas, Liquid, Solid) Boiling Point in Degree C Pressure at 35°C …...mm/Hg Appearance Melting/Freezing Point C Vapour Pressure @ 35°C mm/Hg Odour Others Corrosivity etc. Vapour Density (Air=1) Specific Gravity (Water=1) Solubility in Water at 30°C pH 3. Fire and explosion hazards data Explosion/Flammability Flash Point °C Flash Point °C LEL% UEL% Autoignitin Temperature °C TDG Flammability (Classification 4. Reactive Hazards (Products) Impact (Hazardous) Combustion (Stability ot Products) Static Discharge (Hazardous composition Reactivity (Conditions to Avoid) Hazardous May/May not Polymerization Occur (Conditions to avoid) Incompatibility Material to avoid) 5. Health hazard data Routes of Entry Inhalation, Skin, Mucous Membranes and Eye contact and Ingestion) Effects of Exposure/Symptoms LD 50 (In RAT) Orally or Per cutaneous Absorption) LC 50 (In RAT)) (Mg/Kg. Body Weight) (mg/1)/4 Hour Permissible Exposure Limit (PEL) Short Term Exposure Limit (STEL) ppm mg/cu.m. Ppm/cu.m Threshold Limit Value ppm mg/cu.m. Odour ppm mg/cu.m TLV of ACGIH Emergency Treatment Threshold 6. Hazard specification NEPA Special Hazard Signal Health Flammability Stability Known Hazards Combustible Water Irritant Liquid Reactive material Flammable Material Oxidizer Senstizer Pyrophoric material Organic Peroxide Carcinogen Explosive material Corrosive material Mutagen Unstable material Compressed GAX Others(Specify) 7. Safe usage data Ventilation General/Mechanical Local Exhaust Protective Equipment Eyes (Specify) Required Respiratory (Specify) Gloves(Specify) Clothing (Specify) Others(Specify) Precautions Handling & Storage Others(Specify) 8. Emergency response data Fire Extinguishing Media Fire Special Procedures Unusual Hazards Exposure First Aid Measures (Inhalation, Skin and Eye Contact Ingestion) Spills Steps to be taken West Disposal method 9. Additional information 10. Sources used Reference to Books, Journals, etc. 11. Manufactures/Supplier Data Firms Name Standard Packing Mailing Address Telephone No. Telex No. Other Telegraphic Address Contact person in Emergency Other Emergency Tel. In Transit Areas Acronyms and Glossary of Terms: CAS – Abstract Service Registration Number UN Number – United Nations Number HAZCHEM CODE—Emergency Action Code (EAC), Allocated by the Joint Committee of Fire Bregade Operations, UK TOG Flammability—Transport of Dangerous Goods Flammability Classification by United Nations NFPA—National Fire Protection Association, USA LD 50 and LC 50 Represent the Dose in MC/KC of Body Weight and the Concentration in (MG/1) for 4 Hours Having Lethal effect on 50% of the Animals (Rats) Treated PEL—Permissible Exposure Limit as laid down in the statutes TLV—Threshold Limit Value as laid down by the American Conference of Governmental Industrial Hygienists. (ACGIH), USA STEL—Short Term Exposure Limit as laid down in the statutes or by the ACGIH. Guidelines: All efforts should be made to fill in all the Columns. No Column should be left blank] @[65-NN. Disclosure of information to workers.— (1) The occupier of a factory carrying on a hazardous process shall supply to all workers the following information in relation to handling of hazardous material or substances in the manufacture, transportation, storage and other processes; (a) Requirements of Section 41 B. 41 C and 41 H of the Act; (b) A list of 'hazardous processes' carried on in the factory; (c) Location and availability of all material safety Data Sheets as per Rule 65N; (d) Physical and health hazards arising from the exposure to or handling of substances; @. Deleted vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. (e) Measures taken by the occupier to ensure safety and control of physical and health hazards; (f) Measures to be taken by the workers to ensure safe handling, storage and transportation of hazardous substances; (g) Personal protective equipment required to be used by workers employed in 'hazardous process' or 'dangerous operation'; (h) Meaning. of various labels and markings used on the containers of hazardous substances as provided under Rule 65N; (i) Signs and symptoms likely to be manifested on exposure to hazardous substances and to whom to report; (j) Measures to be taken by the workers in case of any spillage or leakage of a hazardous substance; (k) Rule of workers vis-a-vis the emergency plan of the factory, in particular the evacuation procedures; (l) Any other information considered necessary, by the occupier to ensure safety and health of workers; (2) The information required by sub-rule (1) shall be complied and made known to workers individually through supply of booklets or leaflets and display of cautionary notices at the work places. (3) The booklets, leaflets and the cautionary notices displayed in the factory shall be in the language understood by the majority of the workers and also explain to them. (4) The Chief Inspector may direct the occupier to supply further information to the workers as deemed necessary.] #[65-O. xxx] #[65-P. xxx] @[65-PP. Disclosure of information to the Chief Inspector.— $[(1) The occupier of every factory carrying on hazardous process shall furnish, in writing to the Chief Inspector, a copy of all the information furnished to the workers.] (2) A copy of compilation of material safety Data Sheets in respect of hazardous substances used, produced or stored in the factory shall be furnished to the Chief Inspector, and the local Inspector. (3) The occupier shall also furnish any other information asked for by the Chief Inspector from time to time for the purpose of this Act and Rules made thereunder.] #[65-Q. xxx] #[65-QQ. xxx] #. Deleted vide Notification No F3(1)legal/F&B/2001/5584 dated 8.8.2002; published in Rajasthan Gazette Extraordinary, Part 4(Ga)(1), dated 13.8.2002 @. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. $. Substituted vide Notification No F3(1)legal/F&B/2001/5584 dated 8.8.2002; published in Rajasthan Gazette Extraordinary, Part 4(Ga)(1), dated 13.8.2002 @[65-R. Information on industrial wastes.— (1) The information furnished under Rule [65-NN and 65-PP] shall include the quantity of the solid and liquid wastes generated per day, their characteristics and the method of treatment such as incineration of solid wastes chemical and biological treatment of liquid wastes, and arrangements for their final disposal. (2) It shall also include information on the quality and quantity of gaseous waste discharged through the stocks or other openings, and arrangements such as provision of scrubbers. cyclone separators, electrostices precipitators or similar such arrangements made for controlling pollution of the environment. (3) The occupier shall also furnish the information prescribed in the sub-rule (1) and (2) to the State Pollution Control Board.] $[65-RR. Review of the information furnished.— (1) The occupier shall review once in every calendar year and modify, if necessary, the information furnished under rule-65-NN and 65-PP to the workers and Chief Inspector. (2) In the event of any change in the process or operations or methods of work or when any new substance is introduced in the process or in the event of a serious accident taking place, the information so furnished shall be reviewed and modified to the extent necessary.] $[65-S. Confidentiality of information.— The occupier of a factory carrying on hazardous process shall disclose all information needed for protecting safety and health of the workers and general public in the neighbourhood to, (a) his workers; and (b) Chief Inspector as required under rules 65-NN and 65-PP. If the occupier is of the opinion that the disclosure of details regarding the process and formulations will adversely affect his business interests he may make a representation to the Chief Inspector stating the reasons for withholding such information. The Chief Inspector shall give an opportunity to the occupier of being heard and pass an order on the representation. An occupier aggrieved by an order of Chief Inspector may prefer an appeal before the State Government within a period of 30 days. The State Government shall give an opportunity to the occupier of being heard and pass an order. The order of the State Government shall be final.] @[65-SS. Medical Examination.— (1) Workers employed in a 'hazardous process' shall be medically examined by a qualified medical practitioner hereinafter referred to as Factory Medical Officer in the following manner:— (a) Once before employment, to ascertain physical fitness of the person to do the particular job; (b) Once in a period of 6 months, to ascertain the health status of all the workers in respect of occupational health hazards to which they are exposed; and in cases where in the opinion of the Factory Medical Officer it is necessary to do so at a shorter interval in respect of any worker; (c) The details of pre-employment and periodical medical examinations carried out as aforesaid shall be recorded in the health Register in Form No.19. @. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. $. Substituted vide Notification No F3(1)legal/F&B/2001/5584 dated 8.8.2002; published in Rajasthan Gazette Extraordinary, Part 4(Ga)(1), dated 13.8.2002 (2) No person shall be employed for the first time without a certificate of Fitness in Form 5 granted by the factory Medical Officer. If the Factory Medical Officer declares a person unfit for being employed in any process covered under sub-rule (1), such a person shall have the right to appeal to the Inspector who shall refer the matter to the Certifying Surgeon whose opinion shall be final in this regard. If the Inspector is also a Certifying Surgeon, he may dispose of the application himself. (3) Any findings of the Factory Medical Officer repealing any abnormality or unsuitability of any person employed in the process shall immediately be reported to the Certifying Surgeon who shall in turn, examine the concerned worker and communicate his findings to the occupier within 30 days. If the Certifying Surgeon is of the opinion that the workers so examined is required to be taken away from the process for health protection, he will direct the occupier accordingly, who shall not employ the said worker in the same process. However, the worker so taken away shall be provided with alternate placement unless he is in the opinion of the Certifying Surgeon, fully incapacitated in which case the worker affected shall be compensated as per law. (4) A certifying Surgeon on his own motion or on a reference from an Inspector may conduct medical examination of a worker to ascertain the suitability of his employment in a hazardous process or for ascertaining his health status. The opinion of the Certifying Surgeon in such a case shall be final. The fee required for this Medical Examination shall be paid by the occupier. (5) The workers taken away from employment in any process under sub-rule (2) may be employed again in the same process only after obtaining the Fitness Certificate from the Certifying Surgeon and after making entries to that effect in the Health Register. (6) The workers required to undergo Medical Examination under these rules and for any medical survey conducted by or on behalf of the Central or the State Government shall not refuse to undergo such Medical Examination. (7) The Factory Medical Officer shall have qualifications included in Schedules to the Indian Medical Degree Act. 1916 or in the Schedules to the Indian Medical Council Act, 1956 and possess a certificate of Training in Industrial Health of minimum three month duration recognised by the State Government. Provided that:— (i) a person possessing a Diploma in Industrial Health or equivalent shall not he required to possess the certificate of training as aforesaid: (ii) the Chief Inspector. may subject to such conditions as he may specify, grant exemption from the requirement of this sub- rule, if in his opinion a suitable person possessing the necessary qualification is not available for appointment: (iii) in case of a person who has been working as a factory Medical Officer for a period of not less than 3 years on the date of commencement of this rule, the Chief Inspector, may subject to the condition that the said person shall obtain the aforesaid certificate of training within a period of three years relax the qualification. (8) The syllabus of the course leading to the above certificate, and the organisations conducting the course shall be approved by the Directorate General of Factory Advice Service and Labour Institutes or the State Govt. in accordance with the guidelines issued by the DGFASLI. (9) Within one month of the appointment of a Factory Medical Officer, the occupier of the factory shall furnish to the Chief Inspector the following particulars:— (a) Name and address of the Factory Medical Officer (b) Qualifications (c) Experience, if any, and (d) the sub-rule under which appointed.] @[65-T. Occupational Health Centres.— (1) In respect of any factory carrying on hazardous process or dangerous operations and employing more than 500 workers, there shall be provided and maintained in good order an Occupational Health Centre with the Services and facilities as laid down hereunder: For Factories employing above 500 workers:- (i) One full-time Factory Medical Officer having qualification prescribed under rule 65 (SS). (ii) An Occupational Health Centre having at least 2 rooms each with a minimum floor area of 15 Sq.Mt. with floors and walls made of smooth and impervious surface arid adequate illuminations and ventilation as well as equipment as per the schedule annexed to this rule. (iii) there shall be one nurse, one dresser-cum-compounder and one sweeper-cum-ward boy throughout the working period. (iv) the Occupational Health Centre shall be suitably equipped to manage medical emergencies. Schedule Equipment for occupational Health Centre in Factories. 1. A glazed sink with hot and cold water always available. 2. A table with a smooth top of size at least 180 cm x 105 cm. 3. Means for sterlizing instruments. 4. A couch. 5. Two buckets or containers with close fitting lids. 6. A kettle and spirit stove or other suitable means of boiling water. 7. One bottle of spritus ammoniac aronatious (120 ml.). 8. Two medium size sponges. 9. Two 'Kidney' trays. 10. Four cakes of toilet, preferably antiseptic soap. 11. Two glass tumblers and two wine glasses. 12. Two clinical thermometers. 13. Two tea spoons. 14. Two graduated (120 ml.) measuring glasses. 15. One wash bottle (1000 cc) for washing eyes. 16. One bottle (one liter) carbolic lotion 1 in 20. 17. Three Chairs. 18. One Screen. 19. One Electric Hand Torch. 20. An adequate supply of tetanus toxied. --------------------------------------------------------------------------------------------------------------- @. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. 21. Coramine liquid (60 ml.) 22. Tablets-antihistaminic, antispasmodic (25 each). 23. Syringes with needles-2 cc, 5 cc and 10 cc. 24. Two needle holders, big and small. 25. Suturing needles and materials. 26. One dissecting forceps. 27. One dressing forceps. 28. One scapels. 29. One stethoscope. 30. Rubber bandage, Pressure bandage. 31. Oxygen Cylinder with necessary attachment. 32. One Blood Pressure apparatus. 33. One Patellar Hammer. 34. One stomach wash set. 35. Any other equipment recommended by the Factory Medical Officer according to specific need relating to manufacturing process. 36. One peak flow meter for lung function measurement. 37. In addition : (1) For Factories employing 501 to 1000 workers:— (i) Four plain wooden splints 900 mm x 100 mm x 6 mm. (ii) Four plain wooden splints 350 mm x 75 mm x 6 mm. (iii) Two plain wooden splints 250 mm x 50 mm x 12 mm. (iv) One pair artery forceps. (v) Injections morphia, pethidine, atropine, adrenalin, caramine novacan (2 each). (vi) one pair surgical scissors. (2) For Factories employing above 1000 workers:- (i) Eight plain wooden splints 900 mm x 100 mm x 6 mm (ii) Eight plain wooden splints 350 mm x 75 mm x 6 mm. (iii) Four plain wooden splints 250 mm x 50 mm x 12 mm. (iv) Two pairs artery forceps. (v) Injections morphia, pethidine, atropine, adrenaline, carmine novacan (4 each). (vi) Two pair surgical scissors.] @[65-TT. Ambulance Van.— (1) In any factory carrying on 'hazardous process', there shall be provided and maintained in good condition, a suitably constructed ambulance van equipped with items as per sub-rule (2) and manned by a full time Driver-cum- Mechanic and a Helper trained in first-aid, for the purposes of transportation of serious cases of accidents or sickness. The ambulance van shall not be used for any purpose other than the purpose stipulated herein and will normally be stationed at or near to the occupational Health Centre: Provided that a factory employing up to 500 workers, may make arrangements for procuring such facility at short notice from a nearby hospital or other places, to meet any emergency. --------------------------------------------------------------------------------------------------------------- @. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. (2) The Ambulance should have the following equipments:— (a) General : — A wheeled stretcher with folding and adjusting devices with the head of the stretcher capable of being titled upward; — Fixed suction unit with equipment; — Fixed Oxygen supply with equipment; — Pillow with case, sheets, blankets, towels; — Emesis bag, Bed pan, Urinals, Glass. (b) Safety equipments: — Flares with life of 30 minutes: flood lights; — Flash lights, fire extinguisher dry powder type: — Insulated gauntlets. (c) Emergency Care equipments : (i) Resuscitation : — Portable suction units, portable Oxygen units; — Bag-valve-mask, hand operated articles/ventilation unit; — Airways, mouth gages, Tracheostomy adopters, — Short spine board, I.V.Fluids with administration unit; — B.P.Manometer, Cugg, Stethoscope. (ii) Immobilization : — Long & short padded boards-wire ladder splints; — Triangular bandage, Long and short spine boards. (iii) Dressings : — Cause pads 4" X 4", -Universal dressing 10" X 36": — Roll of aluminium foils, soft roller-bandages 6" X 5" yards: adhesive tape in 3" roll, safety pin, — Bandage sheets, Burn sheet. (iv) Poisoning : — Syrup of Ipecac-Activated Charcoal pre packeted in doses, snake bite kit: — Drinking water. (v) Emergency Medicines : — As per requirement (under the advice of medical officer only).] @[65-U. Decontamination facilities.— In every factory carrying out the 'hazardous process', the following provisions shall be made to meet any emergency:— (a) Fully equipped first aid box; (b) readily accessible means of water for washing by workers as well as for drenching the clothing of workers who have been contaminated with hazardous and corrosive substance: and such means shall be as per the scale shown in the Table below:— --------------------------------------------------------------------------------------------------------------- @. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. Table No. of persons employed at any time No. of drenching Showers (i) Up to 50 workers 2 (ii) Between 51 to 200 workers 2 + 1 for every additional 50 or part thereof (iii) Between 201 to 500 workers 5 + 1 for every additional 100 or part thereof (iv) 501 workers and above 8 + 1 for every additional 200 or part thereof. (c) A sufficient number of eye wash bottle filled with distilled water or suitable liquid, kept in boxes or cupboards conveniently situated and clearly indicated by a distinctive sign which shall be visible at all times.] (d) @[65-UU. Making available Health records to workers.— (1) The occupier of every factory carrying out a 'hazardous process' shall make accessible the health records including the record of workers exposure to hazardous process or. as the case may be, the medical records of any workers or his perusal under the following conditions.— (a) Once in every six months or immediately after the medical examination whichever is earlier: (b) If the factory Medical Officer or the Certifying surgeon as the case may be. is of the opinion that the worker has manifested signs and symptoms of any notificable diseases as specified in the third schedule of the Act: (c) If the worker leaves the employment: (d) If any one of the following authorities so direct: The Chief Inspector of Factories: — The Health Authority of the Central or State Government: Commissioner of Workers Compensation: — The Director General, Employees State Insurance Corporation; — The Director, Employees State Insurance Corporation (Medical Benefits); and — The Director General, Factory Advice Service and Labour Institutes. (2) A copy of the up-to-date health records including the record of workers exposure to hazardous process or, as the case may be, the medical records shall be supplied to the worker on receipt of an application from him, X-Ray plates and other medical diagonistic reports may also be made available for reference to his medical practitioner.] @[65-V. Qualifications, etc. of Supervisors.— (1) In every factory covered under rule 65 QQ the persons who are required to supervise the handling of hazardous substances shall possess the following qualifications and experience: (a) (i) A degree in Chemistry or Diploma in Chemical Engineering or Technology with 5 years experience: or (ii) A Master's degree in Chemistry or a Degree in Chemical Engineering or Technology with 2 years experience. The experience stipulated above shall be in process operation and maintenance in the Chemical Industry. (b) The Chief Inspector may require the supervisor to undergo training in Health and Safety. --------------------------------------------------------------------------------------------------------------- @. Added vide Notification No. F.4(3) Shram/88 dated 8.1.1991, published in Rajasthan Gazette Part 3(Ga) dated Rajasthan 25.6.1992. (2) The syllabus and duration of the above training and the organisations conducting the training shall be approved by the D.G. FASLI or the State Government in accordance with guidelines issued by the D.G. FASLI.] #[65-VV. Issue of guidelines.— For the purpose of compliance with the requirements of Sub-sections (1). (4) and (7) of Section 41-B or 41-C the Chief Inspector may, if deemed necessary, issue guidelines from time to time to the occupiers of factories carrying on "hazardous process": Such guidelines may be based on National Standards, Codes of Practice, or recommendations of International Bodies such as ILO and WHO.] CHAPTER V Welfare

Previous and next

All provisions of Rajasthan Factories Rules,1951

Questions people ask

Is rule 65D of Rajasthan Factories Rules,1951 still in force?

No repeal of Rajasthan Factories Rules,1951 is recorded.