Rule 3, THE TELANGANA FACTORIES RULES, 1950: Name of organization (If not self
THE TELANGANA FACTORIES RULES, 1950 - Rule 3
Text of rule 3
Name of organization (If not self
3.Name of organization (If not self—
employed)
4 . Designation
5. Educational Qualification (Xerox copies of testimonials
to be attached)
6. Details of professional experience (in chronological
order)
Name of he
Organisation
Period of service Designation Area of
Responsibility
7.Membership, if any of Professional Bodies
• Details of facilities (examination testing, etc.,) at his
disposed
(ii) Arrangements for calibrating : and maintaining the
accuracy of these facilities
** Purpose for which
competency Certificate is
sought (section or
• Sections of the Act should be stated
• Whether the applicant has been declared as a
competent person under any statute (if so the details).
• Any other relevant, information Declaration by the
applicant
I, ............................................................................................................. hereby declare
that the information furnished above is true. I undertake.
• that in the event of any change in the facilities at my disposal
(either addition or deletion) or my leaving the aforesaid organization. 1 will
promptly inform the Director of Factories.
• to maintain the facilities in good working order, calibrated
periodically as per manufacturer's instructions or as per National standards,
and
• to fulfill and abide by all the conditions stipulated in the
certificate of Competency and instructions issued by the Chief Inspector of
Factories from time to time.
Signature of the Applicant
Place:
Date:
** Please furnish the following information in a separate sheet duly signed by the applicant.
List of buildings so far:
(i) Constructed and its value.
(ii) A detailed note regarding non-destructive testing various codes of
practices that are current and the effect of the vibrations and natural forces
on the stability of the buildings is enclosed.
Form of Application n for Grant of Certificate of Competency to Any
Institution n U under Sub-rule (2) of Rule -2A
[See Rule 2A]
Name and full address
2. Organization's status (specify whether Government, autonomous, Co -
operative, Corporate or Private)
3. Purpose for which competency certificate is sought (specify Section(s)
of the Act) ;
4. Whether the organization has been declared as competent person under
this or any other statute. If so, give details.
5. Particulars of persons employed and possessing qualification and
experience as set out in Schedule annexed to rule 2 -A.
6. Details of facilities (relevant to item 3 above and arrangements made
for their maintenance and periodic calibration)
Any other r relevant i information.
D e c l a r a t i o n :
I , … … … … … … … … … … . here by ..................... o n behalf of
of………………………………………………………………………………………..
certify that the details furnished above are correct to the best of my knowledge.
I under ta ken to -
(i) maintain the facilities in good working order, calibrated
periodically as per manufacturer's instructions or as per National
standards; and
(ii) to fulfill and abide by all the conditions stipulated in the
certificate of competency and instructions issued by the Chief
Inspector from time to time.
(iii)
Place: Signature of Head of the Institution
Date: or of the persons authorized to
Sign on his behalf
Certificate
(Issued
in
of Recognition
pursuance of sub -rule
as
(5)
Competent
of Rule
Person
2 A)
[See Rule 2A]
CP (0) No.
Date:
The Director of Factories,
4
Telangana, Hyderabad in exercise of the powers
conferred under Section 2 (ca) of the Factories Act and Rules made thereunder,
hereby recognize* ……………………………………………….
represented b y** ........................................................................................... to be a
competent person for the purpose of carrying out test, examination inspection a n d
c e r t i f i c a t i o n s f o r * * * used in factories subject to the conditions overleaf.
The Jurisdiction extends all over
4
Telangana desh /is restricted to M/s …………….
This certificate is valid from… … … … … …… …… … …… … …… …… … …
Office Seal Director of Factories
Revalidation details
From To Signature of authority
(I) (2) (3)
* Na me of the institution
4
For the words ― Andhra Pradesh‖, the word ―Telangana‖ substituted by G.O.Ms.No. 39 of Labour, Employment,
Training and Factories Department, dated 30-12-2015.
** Na me of the competent person
*** (a) Building (b) Hoists (c) Lifts
• Chains (e) Lifting ma chines ( f) Ropes
(g) Lifting tackles (h) Pressure plant (i) Ventilation system
(j) Confined space ( k) Plants & equipment of
dangerous processes
as applicable.
This certificate is issued subject to the conditions stipulated hereunder: -
(i) tests, examinations and inspections shall be carried out in accordance
with the provisions of the Act and the Rules
(ii) tests, examinations and inspections shall be carried out under direct
supervision of the competent person or by a person so authorized by an
institution recognized to be a competent person.
(iii) the certificate of competency issued in favour of a person shall
stand cancelled if the person leaves the organization mentioned in this
application.
(iv) the institution recognized as a competent person shall keep the Chief
Inspector informed of the names, designation and qualifications of the
person authorized by it to carry out tests„ examinations and inspections.
(v) the competent person should be physically present at the time of
testing and examination.
(vi) records of daily work done should be maintained in a log book
incorporating therein the details regarding the date, the work done,
observations made„ directives given etc.,
(vii) copies of examination on certificates in all cases where defects are noticed and
repairs are ordered or any conditions imposed on its use are to-be marked to the
Inspector of Factories concerned.
(viii) application for renewal of certificate along with a brief account of work done
during the period of validity of the certificate may be made atleast one month before
the certificate expires together with fees prescribed for the purpose;
(ix) this recognition is subject to constant review and liable to be cancelled if
deficiencies come to notice].
RULES 3 TO 11 PRESCRIBED UNDER SUB-SECTION (1 ) OF SECTION 6
3. Submission and Approval of plans
(1) In the case of any factory where,
(a) any hazardous process of the nature specified in the First Schedule of the Act is proposed to be
carried on whether or not with the aid of power and notwithstanding that the number of persons
employed is less than any number specified in Section 2(m) of the Act ; or
(b) the installed power is proposed to be or extended to
1
30 H.P. or more ;
No site shall be used for the location of a factory nor shall any building in a factory be constructed,
extended or taken into use as a factory or part of a factory and no machine, or plant or any
permanent fixture shall be installed or fixed, nor shall any manufacturing process be carried on in
any factory or part of a factory, unless the occupier or the owner of the factory obtains the previous
permission in writing approving the plans from the Chief Inspector
2
through online.
(2) 1
The owner or occupier of every factory falling under sub-rule (1) and the owner or occupier
of any other factory shall upload through online for approval of plans in the prescribed Form
No.1 by remitting the plans scrutiny fee at the following rates:
Factories wherein the Maximum installed Horse Power is
upto 100
Rs.1,000/-
Factories wherein the Maximum installed Horse Power is
upto 101 to 500
Rs.3,000/-
Factories wherein the Maximum installed Horse Power is
upto 501 to 1500
Rs.5,000/-
Factories wherein the Maximum installed Horse Power is
upto 1501 to 10,000
Rs. 10,000/-
Factories wherein the Maximum installed Horse Power is
above 10,000
Rs.15,000/-
(3) If the Chief Inspector is satisfied that the plans
1
uploaded under sub-rule (2) are in accordance
with the requirements of the Factories Act, 1948 and Telangana Factories Rules, 1950 he
shall by an order grant the permission applied for through online subject to conditions, if any‖;
(4) If the Chief Inspector is of the opinion that the plans uploaded under sub-rule (2) are not in
accordance with the requirements of the Act, or if he finds it fit or expedient to specify any
conditions of approval, including conditions relating to cancellation or modifications of prior
approvals, he shall, after giving the applicant a reasonable opportunity of being heard, send to the
applicant a speaking order
2
through online either approving the plans subject to such conditions as
may be specified therein or refuse the permission applied for.
3
1. Substituted by G..Ms.No. 33 of LET & F (Lab.II) Department, dated 7-11-2019
2. Added by G..Ms.No. 33 of LET & F (Lab.II) Department, dated 7-11-2019
3. The words along with a copy of the plans approved or rejected Omitted by G..Ms.No. 33 of LET
& F (Lab.II) Department, dated 7-11-2019
(5) If no order is communicated to the applicant within thirty days from the date on which the
application has been
1
uploaded through online, the permission applied for shall be deemed to have
been granted.
(6) 1
No manufacturing process shall be carried on in any building in a factory which is not in accordance
with the plans approved by the Chief Inspector and does not satisfy the conditions subject to which
the plans have been approved.‖
(7) For the purposes of this rule, for computing the quantity of power, the power for the plant,
machinery used in the manufacturing process, or the installed horse power of any captive
generation of power, whichever is higher, shall be taken into account and no account shall be taken
of the power for lighting, or for any office equipment or appliances or any stand by captive
generation of power.
(8) 1
In the case of any factory not covered by sub-rule (1), the Government or the Chief Inspector
may, having regard to any special circumstances in any particular existing or proposed factory,
by order, require the owner or occupier to submit the particulars and plans of the factory in Form
No. 1 within thirty days of the service of the order.
Rule 3 A- Approval of Plans :
2
Omitted
4. Grant of Licence
(1) 1The Occupier of every factory, shall atleast fifteen days before commencing any
manufacturing process in any factory upload through online an application for the registration of
the factory and for grant of the licence in the prescribed Form No.2 along with online payment of
annual licence fee up to ten times prescribed in the schedule to Rule 6.
(2) (a) The Occupier shall send and intimate in Form No.2 to the Inspector immediately after the
commencement of manufacturing process.
(b) The premises shall be deemed to be licenced from the date of intimation of commencement of
manufacturing process until such date the Inspector refuses in writing to grant the licence.
(3) The Inspector on notice any defect in the license application or violation of any provision may
be a speaking order and after giving the applicant a reasonable opportunity of being heard, refuse
to grant a licence:
Provided that if no order is communicated to the occupier within a period of 30 days from the date
on which the occupier has sent intimation under sub rule 2 (a), the license shall be deemed to have
been granted and thereupon the license shall be issued forthwith.
(4) If the grant of license has not been refused in accordance with sub-rule (3), the Inspector shall
grant the license in Form No. 4 and send the license to the applicant.
(5) 1
Every Licence granted is permanent and valid till it has been duly cancelled provided the requisite
annual licence fee is remitted through online for that period.
1. Substituted by G..Ms.No. 33 of LET & F (Lab.II) Department, dated 7-11-2019
2. Omitted by G..Ms.No. 33 of LET & F (Lab.II) Department, dated 7-11-2019
(6) No manufacturing process shall be carried on in any factory unless a licence is valid for the
time being.
(7) A licence granted shall be caused to be produced on demand by the Inspector.
5. Amendment of Licence
(i) 1The occupier of a factory shall, within fifteen days of occurrence of any change in the
name or in particulars of the maximum horse power installed or maximum number of persons
employed, apply through online for amendment of the licence stating the nature of amendment
to be made and the reasons there for together with online payment of prescribed fee‖;
(ii) The fee for the amendment of a licence shall be the amount, if any, by which the fee
ehat would have been payable if the licence had originally been issued in the amended form
exceeds the licence fee payable for the relevant calender year but for the amendment along with
an amendment fee or
1
Rs. 500/- (Rupees five hundred)
6. Payment of Annual Licence Fee or for a block period of
2
ten calendar years
Every licencee shall, before the commencement of any calendar year, remit the annual licence
fee as prescribed in the schedule under this rule through online portal of Factories
Department, Telangana State and services connected with the same either for one calendar
year or more but does not exceed 10 calendar years, in case the licencee is intended to
remit the licence fee for ten calendar years the amount payable shall be ten times
the Annual Licence Fee as prescribed in the said schedule.
Provided that for computing the quantity of power, for the purposes of this rule, the
power for the plant and machinery used in the manufacturing process only shall be
taken into account and no account shall be taken of the power for lighting, or for
any office equipment or appliances. The total installed horse power of plant,
machinery and equipment or the captive generation of power whichever is higher
shall be taken into consideration.
(2) If the prescribed annual licence fee is not fully paid within the prescribed period in
sub-rule(1), simple interest at two percent per month or part of a month shall be payable
on the part of the annual licence fee not paid from the first day of the calendar year till
the last day of the calendar month in which the annual licence fee together with interest is
paid:
Provided that the Chief Inspector may, if satisfied that there is sufficient reason for
the non-payment of the annual licence fee within the time prescribed in sub-rule (1),
by order in writing, waive the interest specified:
Provided further that the Chief Inspector may waive the annual licence fee and the
interest thereon if it is shown to his satisfaction that no manufacturing process has been
carried on in the factory on any day of the relevant calendar year and the owner or occupier
applies for the cancellation of licence.
(3) 1
No manufacturing process shall be carried on in any premises unless the requisite
annual licence fee is remitted through online before commencement of the licensing year.‖
1. Substituted by G..Ms.No. 33 of LET & F (Lab.II) Department, dated 7-11-2019
2. For the word ―three‖ is substituted by the word ―ten‖ by G.O.Ms.No. 39 of Labour, Employment, Training
and Factories Department, dated 30-12-2015.
7. Cancellation of Licence
(1) The Inspector may, by a speaking order served on the occupier, cancel any licence issued if the
annual licence fee together with interest has not been paid, and thereupon no manufacturing
process shall be carried on in that factory,
Provided that the Inspector has previously served a written notice on the Occupier, calling upon
him to pay the fee with interest within a period of thirty days from the date of service of the
notice and the occupier has not complied with the terms of the notice,
Provided further that the Inspector may also cancel a licence if an application has been made for
such cancellation by the owner or occupier and in such a case, the notice referred to in the first
proviso of this sub-rule shall not be required.
8. Transfer of Licence
1
A licence may be transferred from one owner or occupier to another consequent to any
transfer of the factory and the transferee shall upload the application through online along
with requisite documents mentioned therein by remitting the transfer fee of Rs. 500/-
(Rupees five hundred) and such application shall be deemed to be endorsement of transfer until
the transfer is endorsed by the Inspector unless the application has been refused by speaking order
in writing within a period of thirty working days from the date of uploading the application.‖
9. Procedure on death or disability of licensee
If a licensee dies or becomes insolvent, the person carrying on the business of such licensee shall
not be liable to any penalty under the Act for exercising the powers granted to the licensee by the
licence during such time as may reasonably be required to allow him to make an application for
the amendment of the licence under Rule 5 in his own name for the unexpired portion of the
original licence.
10. 2Omitted
11. Payment of Fee
―(1)
1
Every application made under these rules through online for which a fee has been prescribed
shall be followed by remitting the prescribed fee through the online portal of Factories
Department, Telangana State.‖
(2)
1
The Annual Licence Fee payable under Rule 6 above is as prescribed in the Schedule and
the items in the Note vide G.O.Ms.No.77, LET&F (Lab) Department, Dated: 28.12.2016.
3[
12. Notice of Change of occupier or manager
(1) The occupier of every factory shall, within seven days of any change in the manager of any
factory, send notice thereof in Form No. 2-A to the Inspector.
(2) Every new occupier of a factory shall, within seven days of the change of occupation, send
notice thereof in Form No. 2-A to the Inspector.]
1. Substituted by G..Ms.No. 33 of LET & F (Lab.II) Department, dated 7-11-2019
2. Omitted by G..Ms.No. 33 of LET & F (Lab.II) Department, dated 7-11-2019
3. Subs. by G.O.Ms.NO. 26, Labour, Employment, T & F (Lab-II) dated 7-6-1999
1[
12-A. Exemption from Section 7-A(3)
All factories in which less than
2[
three hundred workers] are employed shall be exempted from
the provisions of sub-section (3) of Section 7-A of the Act.,.
Provided that this exemption shall not apply to cases where Chapter IV- A relating to hazardous
processes apply,
Provided further that where the Chief Inspector is of the opinion that it is necessary to do so, having
regard, in the case of any particular factory, to the scale of operation and the dangerous or
hazardous nature of the processes carried on or in the interest of public safety, he may, after giving
the owner or occupier a reasonable opportunity of being heard, by a speaking
order in writing, direct that the exemption contained in this rule shall not apply to that factory.]
3
[XXX]
1 [4
12-B. Guidelines, instructions and records
(1) without prejudice to the general responsibility of the Occupier to comply with the provisions
of Section 7-A the Chief Inspector may, from time to time, issue guidelines and instructions
regarding the general duties of the occupier relating to health, safety and welfare of all workers
while they are at work in the factory:
(2) the Occupier shall maintain such records, as may be prescribed by the Chief Inspector in respect
of monitoring of working environment in the factory.
5
12-C Certificate of stability:- (1) No manufacturing process shall be carried on in any
building of a factory constructed, reconstructed or extended or in any building which has
been taken into use as a factory or part of a factory until a certificate of stability in respect of
that building in the form given below has been sent by the occupier or manager of the
factory to the Chief Inspector and accepted by him.
1.Subs. by G.O.Ms.NO. 26, Labour, Employment, T & F (Lab-II) dated 7-6-1999
2. Subs for ―one thousand workers‖ by G.O.Ms.NO. 57, LET&F (Lab-II), dated 19-11-2004
3. Rule 12 B omitted by Ibid.
4. Rule 12 C re numbered as 12-B by G.O.Ms.No. 26, Labour, Employment, T & F (Lab-II) dated 7-6-1999
5. injected by G. .O.Ms.NO. 101, Labour, Employment, T & F (Lab-II) dated 20-10-2007
CHAPTER II
THE INSPECTING STAFF
RULE PRESCRIBED UNDER SECTION 9
13. Powers of Inspectors
1
[(1)] An Inspector shall, for the purpose of the execution of the Act have power to do all or any
of the following things, that is to say-
(a) to photograph any worker, to inspect, examine, measure, copy, photograph, sketch or test, as
the case may be, any building or room, any plant, machinery, appliance or apparatus, any register
or document or any thing provided for the purpose of securing the health, safety or welfare of the
workers employed in a factory.
(b) in the case of an Inspector who is a duly qualified medical practitioner, to carry out such
medical examinations as may be necessary for the purposes of his duties under the Act.
(c) to prosecute conduct or defend before a Court any complaint or other proceeding arising under
the Act or in discharge of his duties as an Inspector.
(2) The qualifications of the Inspectors to be appointed under the Act shall as specified in the rules
issued under the proviso to Article 309 of the Constitution.
(3) When, in any area, an inspection is made by an additional Inspector, he shall prepare the report
and shall within ten days of the Inspection, send to the Inspector under Section 8(1) for action. In
no case shall an additional Inspector communicate copy of his report to the occupier or the manager
of a factory direct.
2
[(4)An Inspector may, if he has reason to believe, as a result of any inspection, examination or
enquiry that an offence under the Act has been or is being committed, search any premises, plant
and machinery and take possession or copies of any register, records or other documents or
portions thereof pertaining to the factory after following the provisions of the Code of Criminal
Procedure, 1973 (Central Act 2 of 1974) so far as may be applicable, relating to search and seizure
under that Act.]
RULE PRESCRIBED UNDER SUB-SECTION (4) OF SECTION 10
14. Duties of certifying surgeon
(1) For purposes of the examination and certification of young persons, who wish to obtain
certificates of fitness, the Certifying Surgeon shall arrange a suitable time and place for the
attendance of such persons, and shall give previous notice in writing of such arrangements to the
managers of factories situated within the local limits assigned to him.
1.Rule 13 re-numbered as sub-rule(1), sub-rule(2) and (3) added by G.O.Ms.No.978dated 4-5-1980
2 Sub-rule (4) added by G.O.Ms.No.412, dated 27-3-1972
(2) The Certifying Surgeon shall issue his certificates in Form No. 5 The foil and counter-foil shall
he filled in and the left thumb mark of the person in whose name the certificate is granted shall be
taken on them. On being satisfied as to the correctness, of the entries made therein and of the
fitness of the person examined, he shall sign the foil and initial the counterfoil and shall deliver
the foil to the person in whose name the certificate is granted. The foil so delivered shall be
the certificate of fitness granted under Section 69. All counter-foils
shall be kept by the Certifying Surgeon for a period of at least two years after the issue of the
certificate.
(3) The certifying surgeon shall, upon request by the Chief Inspector, carry out such examination
and furnish him with such report as he may indicate, for any factory or class or description of
factories where-
(a) cases of illness have occurred which it is reasonable to believe or due to the nature of the
manufacturing process carried on or other conditions of work prevailing therein, or
(b) by reason of any change in the manufacturing process carried on, or in the substances used
therein, or by reason of the adoption of any new manufacturing process or of any substance for use
in a manufacturing process, there is a likelihood of injury to the health of workers employed in
that manufacturing process, or
(c) young persons are or about to be, employed in any work which is likely to ca use injury to their
health.
(4) For the purpose of the examination of persons employed in process covered by the rules relating
to dangerous operations, the Certifying Surgeon shall visit the factories within the local limits
assigned to him at such intervals as are prescribed by the rules relating to such dangerous
operations.
1
[(5)At such visits, the certifying surgeon after examining a worker, shall issue a certificate of
fitness in Form 17-A. The record of examination and re-examinations carried out shall be kept in
the custody of the manager of the factory.
2
[XXX]. ]
(6) If the certifying surgeon finds as a result of his examination that any person employed in such
process is no longer fit for medical reasons to work in that process, he shall suspend such
persons from working in that process for such time as he may think fit and no person after
suspension shall be employed in that process without the written sanction of the certifying
surgeon in the Health Register.
(7) The manager of a factory shall afford to the certifying surgeon facilities to inspect
any process in which any person is employed or is likely to be employed.
(8) The manager of a factory shall provide for the purpose of any medical examination
which the certifying surgeon wishes to conduct at the factory (for his exclusive use on the
occasion of an examination) a room which shall be properly cleaned and adequately
ventilated and lighted and furnished with a screen, a table (with writing materials) and chairs.
1. Subs. by G.O.Ms.No.144, dated 12-7-1994
2. Omitted by G.O.Ms.NO.26, Labour, Employment, T&F (Lab.II) dated 7-6-1999.
1
[14-A. Fees for certifying surgeon for examination of young persons
(1) The certifying surgeon shall be entitled to the following fees for examination and grant of
certificate of fitness under sub-section (2) of Section 69.
(i) Rs. 5 for the first young person and Rs. 3 for every subsequent person examined on a single day
when the person to be examined goes to the certifying surgeon for the purpose of such examination.
(ii) Rs 3 for the first young person and Rs 1 for every subsequent young person examined on a
single day when the person to be examined goes to the certifying surgeon for the purpose of such
examination.
(iii) If a certifying surgeon has to travel beyond a radius of 8 kilometers from his dispensary or
place of posting to examine any young person or persons he shall be entitled to an additional fee
at the rate of 0.50 paise per kilometer for the total distance travelled by him. A certifying surgeon
who is an employee of the State Government shall charge this additional fee from the occupier of
a factory only if he does not charge any travelling allowance for the journey from the State
Government.
(2) The certifying surgeon shall send his bill of fees direct to the occupier of the factory in which
the young persons are employed or are to be employed.
(3) The fees and additional fees prescribed in this rule shall be paid by the occupier of the factory
concerned.
(4) The fees and the additional fees for the renewal of certificate of fitness shall be the same as
prescribed in these rules for grant of certificate of fitness.
14-B. Fees for certifying surgeons for carrying examination under sub-rule(3) of Rule 14-A
The certifying surgeon shall be paid by the occupier of the factory besides the additional fees for
travelling a daily professional fee at the rate of Rs. 10 per day irrespective of the number of persons
examined but this fee shall be reduced to Rs. 5 if the examination does not take more than half of
a day. Provided that if the number of factories visited exceeds four on a single day the professional
fee shall be subject to a minimum of Rs. 15 per day per factory.
14-C. Fees for examination of persons employed in dangerous operations
The fees and additional fees for examination of persons employed in dangerous operations
specified in Rule 95 shall be the same as prescribed in Rule 14-A and shall be payable by the
occupier of the factory in which the persons examined are employed.]
1. Rule 14 –A to 14 –C added by G.O.Ms.No.787, dated 4-7-1973.
CHAPTER III
HEALTH
EXEMPTIONS UNDER SUB-SECTION (2) OF SECTION 11
1
[15.Exemption from Section 11(1)(d)
(1) The provisions of Clause (d), (dd) and (e) of sub-section (1) of Section 11 shall not apply to
any class of factory subject to the condition that the inside walls, partitions, ceilings or tops of
rooms and all walls, sides and tops of passages and staircases are kept clean by effective means
and they are painted as often as necessary, and subject to the condition in sub-rule (2) of this rule.
(2) If it appears to the Chief Inspector that any part of a factory which is exempted under sub-rule
(1) of this rule is not kept in a clean state, he may after giving an opportunity to the occupier to be
heard, by written order require the occupier to carry out washing, painting or varnishing within
such reasonable period of not less than two months as may be specified in the order.]
16. 2[xxx]
RULES PRESCRIBED UNDER SUB-SECTION (2) OF SECTION 12
3
[17.Disposal of trade wastes and effluents
The arrangements made in every factory for the treatment of wastes and effluents due to the
manufacturing process carried on therein shall be in accordance with those approved by the
relevant Water and Air Pollution Boards appointed under the Water (Prevention and Control of
Pollution) Act, 1974 (Central Act No. 6 of 1974) and the Air (Prevention and Control of Pollution)
Act, 1981 (Central Act No. 14 of 1981) and other appropriate authorities.
1. Subs. by G.O.Ms.NO.26, Labour, Employment, T & F (Lab. II) Departmentt, dated 7-6-1999
2. Omitted by Ibid
3. Subs. by G.O.Ms. No. 144, dated 12-7-1994.
RULES PRESCRIBED UNDER SECTION 13 (2)
17-A. Standards of ventilation
(1) In every room of a factory, doors and windows shall be provided in the proportion of 0.5 square
metres at least for each worker employed in such a room, and the openings shall be such as to
admit of a continued supply of fresh air.
(2) No window provided in a wall shall be of a size less than
1
[1.5 metres x 0.90 metres.]
(3) The lower sill level of a window shall not be more than
2
[90 cm] from the floor level of the room.
(4) The doors and windows shall be so spaced as to be not more than
2
[3 metres] from centre to
centre.
(5) A second set of windows of not less than
2
[1.2 x 0.9 metres] shall be provided if the height of
the building at the eaves
2
[6 metres] or more and fixed directly above the first set of windows and
doors.
(6) In every room of the factory where machinery is installed, roof openings to provide for
adequate natural ventilation shall be provided to the satisfaction of the Inspector.
(7) No verandah, portico or any structure shall be constructed nor any material stored so as to
adversely effect the entry of fresh air into the room of a factory.
RULES PRESCRIBED UNDER SECTION 13 (3)
3
[17-B. Ventilation and Temperature
(1) Limits of temperature and air movement..- In any factory the maximum wet bulb temperature
of air in a work room at a height of 1.45 metres (5 feet) above the floor level shall not exceed 308-
C, (860-1) and adequate air movement of at least 30 metres per minute (100 feet per minute) shall
be provided; and in relation to dry bulb temperature in the wet bulb temperature in the workroom
at the said height shall not exceed the temperature shown in the Schedule below or as regards a
dry-bulb reading intermediate between the two dry-bulb readings that specified in relation to the
higher of these two dry-bulb readings.
1. Subs. by G.O.Ms.No. 152 ( F & B) dated 20-4-1989
2. Subs. by G.O.Ms.NO. 152 (F & B) dated 20-4-1989
3. Rules 17- B & 17-C substituted by G.O.Ms.No 621, dated 26-8-1980.
SCHEDULE
Dry-bulb
temparature
Wet-bulb temparature
(
0
C) (
0
F) (
0
C) (
0
F)
30 (86) 29.0 (84.2)
31 (87.8) 28.9 (84.0)
32 (89.6) 28.8 (83.8)
33 (91.4) 28.7 (83.6)
34 (93.2) 28.6 (83.5)
35 (95) 28.5 (83.4)
36 (96.8) 28.4 (83.2)
37 (98.6) 28.3 (83.0)
38 (100.4) 28.2 (82.7)
39 (102.2) 28.1 (82.6)
40 (104) 28.0 (82.5)
41 (105.8) 27.9 (82.3)
42 (107.6) 27.8 (82.1)
43 (109.4) 27.7 (81.9)
44 (111.2) 27.6 (81.7)
45 (113) 27.5 (81.5)
46 (114.8) 27.4 (81.3)
47 (116.6) 27.3 (81.1)
Provided that if the temperature measured with a thermometer to be inserted in a hollow globe of
15 cm.(6 in) dia coated mat black outside and kept into the environment for not less that 20 minutes
exceeds the dry bulb temperature of air, the temperature so recorded by the globe thermometer
shall be taken in place of the dry-bulb temperature;
Provided further than when the reading of the wet bulb temperature outside in the shade exceeds
27deg C, (80.6 deg F)., the value of the wet bulb temperature allowed in the schedule for a given
dry bulb temperature may correspondingly exceed to the same extent.
Provided further that this requirement shall not apply in respect of factories covered by Section
15 and in respect of factories where the nature of work carried on involves production of
excessively high temperature referred to in clause (b) of sub-section (1) to which workers are
exposed for short periods of time not exceeding one hour followed by an interval of sufficient
durations in thermal environments not exceeding those otherwise laid down in this rule.
Provided further that the Chief Inspector, having regard to the health of the workers, may in special
and exceptional circumstances; by an order in writing exempt any factory or part of a factory from
the forgoing requirement in so far as restricting the thermal conditions, within the limits and down
in the schedule, are concerned, to such extent that he may consider necessary subject to such
conditions as he may specify.
(2) Provision of the thermometers.
(i) If it appears to the Inspector that in any factory, the temperature of air in a work room is
sufficiently high and is likely to exceed the limits prescribed in sub-rule(l) he may serve on the
manager or of the factory an order requiring him to provide sufficient number of whirling
hygrometers or any other type of hygrometers and direct that the dry bulb and wet bulb readings
in each such work room shall be recorded as such positions as approved by the Inspector twice
during each working shift by a person specially nominated for the purpose by the manager and
approved by the Inspector.
(ii) If the Inspector has reason to believe that a substantial amount of heat is added inside the
environment of a work room by radiation from walls, roof or other solid surroundings, he may
serve on the manager of the factory an order requiring him to provide one or more globe
thermometers referred to in the first proviso in sub-rule(l), and further requiring him to place the
globe thermometers at places specified by him and keep a record of the temperatures in a suitable
register.
(3) Ventilation
(i) In every factory the amount of ventilation openings in a work room below the Caves shall,
except where mechanical means of ventilation as required by Clause 1
(i) are provided, be of an aggregate area of not less than 15% of the floor area and so located as
to afford a continued supply of fresh air.
Provided that the Chief Inspector may relax the requirements regarding the amount of ventilating
openings if he is satisfied that having regard to the location of the factory, orientation of the work
room, prevailing winds, roof height and the nature of manufacturing process carried on,
sufficient supply of fresh air into work room is afforded during most part of the working time:
Provided further that this requirement shall not apply in respect of work rooms of factories-
(i) covered by Section 15; or
(ii) in which temperature and humidity are controlled by refrigeration.
(iii) Where, in any factory owing to special circumstances such as situation with respect to floor
space, the requirements of ventilation openings under clause(i) cannot be complied with or in the
opinion of the Inspector the temperature of air in a work room is sufficiently high and likely to
exceed the limits prescribed in clause(i), he may serve on the manager of the factory an order
requiring him to provide additional ventilation either by means of roof ventilators or by mechanical
means.
(iv) The amount of fresh air supplied by mechanical means of ventilation in an hour shall be
equivalent to at least six times the cubic capacity of the work room and shall he distributed evenly
throughout the work room without dead air pockets or under draughts caused by high inlet
velocities.
(v) In regions where in summer (15th March-15th July) dry bulb temperatures of outside air in the
shade during most part of day exceed 35 deg C (95 deg F) and simultaneous wet bulb temperatures
are 25 deg (67deg F) or below and in the opinion of the Inspector the manufacturing process carried
on in the work room of a factory permits thermal environments with relative
humidity of 50% or more, the Inspector may serve on the manager of the factory an
order to have sufficient supply of outside air for ventilation cooled by passing it through water
sprays either by means of unit type of evaporative air coolers (desert coolers) or, where supply of
outside air is provided by mechanical means through ducts in a plenum system, by means of
central air washing plants.
1
[17-C . (1) Columns pillars or walls supporting the roof in a factory in which a manufacturing
process is carded on shall be at least 4.25 metres high from the floor level.
(1) Every factory shall be constructed with pucca masonry walls of brick stone or other material
approved by the Chief Inspector of Factories and of sufficient thickness.
(2) The roof material used in a factory shall be non-heat radiating and fire retarding Provided that
the Chief Inspector of Factories may approve any other material used for a roof when a secondary
ceiling of non-heat radiating material is provided with a minimum air gap of 10cms.
17-D. Powers of Chief Inspector to exempt
Where the Chief Inspector is satisfied in respect of any particular factory or part thereof or in
respect of and description of workroom of process that any requirement of the Rules 17-A, 17-B,
or 17-C is in appropriate or is not reasonably practicable, he may by order, in writing, exempt the
factory or part thereof, or description of workroom or process from such requirement to such extent
and subject to such conditions as he may specify.]
RULES 18 TO 28 PRESCRIBED UNDER SUB-SECTION (1) OF SECTION 15
18. When artificial humidification not allowed
There shall be no artificial humidification in any room of a factory-
(a) by the use of steam during any period when the dry bulb temperature of that room exceeds
2
[29.5 degrees centigrade.]
(b) at any time when the wet bulb reading of the hygrometer is higher than
that specified in the following Schedule in relation to the dry
1. Rules 17 –C & 17-D inserted by G.O.Ms.No.152 (F & B), dated 20-4-1989
2. Sub. by ibid
bulb reading intermediate between any two bulb readings indicated consecutively in the schedule
when the dry bulb reading does not exceed the wet bulb reading to the extent indicated in
relation to the lower of these two dry bulb readings.
SCHEDULE
Readings in degrees centrigrade
Dry bulb Wet bulb Dry bulb Wet bulb Dry bulb Wet bulb
15.5 14.5 25.0 24.0 34.5 30.0
16.0 15.0 25.5 24.5 35.0 30.5
16.5 15.5 26.0 25.0 35.5 31.0
17.0 16.0 26.5 25.5 36.0 31.0
17.5 16.0 27.0 26.0 36.5 31.5
18.0 16.5 27.5 26.0 37.0 31.5
18.5 17.0 28.0 26.5 37.5 31.5
19.0 18.0 28.5 27.0 38.0 32.0
19.5 18.5 29.0 27.0 38.5 32.0
20.0 19.0 19.5 28.0 39.0 32.0
20.5 19.5 30.0 28.0 39.5 32.5
21.0 20.0 30.5 28.5 40.0 32.5
21.5 20.5 31.0 28.5 40.5 33.0
22.0 21.0 31.5 29.0 41.0 33.0
22.5 21.0 32.0 29.0 41.5 33.0
23.0 21.5 32.5 29.0 42.0 33.0
23.5 22.0 33.0 29.5 42.5 30.0
24.0 23.0 33.5 29.5 43.0 33.5
24.5 23.5 34.0 30.0 43.5 33.5
Provided however, that clause (b) shall not apply when the difference between the wet bulb
temperature is indicated by the hygrometer in the department concerned and the wet bulb
temperature taken with a hygrometer outside in the shade is
1
[less than 20 degrees centigrade.]
Previous and next
Questions people ask
Is rule 3 of THE TELANGANA FACTORIES RULES, 1950 still in force?
No repeal of the TELANGANA FACTORIES RULES, 1950 is recorded.