Appendix B, The Tamil Nadu Factories Rules,1950: APPENDIX B
The Tamil Nadu Factories Rules,1950 - Appendix B
Text of appendix B
APPENDIX B
APPENDIX B
(See Clause ll)
(a) The hazards --
(i) Benzene and substances wnlaining Benzene are harmful ;
(ii) Prolonged or repeated breathing of Benzene vapours may
result in acute or chrnnic poisoning;
(iii) Benzene can also be absorbed through skin which may
cause skin and other diseases
‘
(I!) The preventive measures m be taken v
0) Avoid breathing of benzene vapours ;
i
i
E
a
!
R 95] TAMIL NADU FACIORJES Rm.as, 1950
11 (ti) Avoid prolonged or repeated contact of benzene
with the skin ;
(iii) Remove benzene soaked or wet clothing promptly ;
(iv) If any time you are exposed to high concentration
of benzene vapours and exhibit the sign and symptoms such as
dizziness, difficulty in breathing, excessive excitation and losing of
consciousness, immediately inform your Factory Manager ;
(v) Keep all the containers of benzene closed;
(vi) Handle, me and process benzene and substances
contalnmg benzene carefully in order to prevent their spillage .JD
floor;
(vii) Maintain good house-keeping;
(c) The protective equipment to be used-
(i) Use respiratory protective equipment in places where
benzene vapours are present in high concentration ;
(ii) In emergency, use self-generating oxygen mask or
oxygen or air cylinder masks;
(iii) Wear handgloves, aprons, goggles and gum boots to
avoid contact of benzene with your skin and body parts.
(d) The first-aid measure to lfe taken in the case of acute
benzene poisoning, t 1) Remove the clothing immediately if it is
wetted with benzene.
(ii) If liquid benzene enters eyes, flush thoroughly for at
least fifteen minutes with clean runnmg water and immediately
secure medical attention.
(iii) In case of usual exposure to benzene vapour, call a
physician immediately. Until he arrives do the following:-
If the exposed person ts conscious : -:
(A) Move him to frevh a ir in open ;
(B) Lay down without a pillow and keep him quiet and
warm.
If the exposed person is unconscious.-(a) Lay h im down
pref erably on the left side with the head low ;
(b) Remove any false teeth, chewing gum, tobacco or
other foreign objects which may be in his mouth ;
(c) Provide him artificial respiration in Cabe d ifficulty is
t">etng experienced in breathing;
(d) In case of shallow breathing or cyanosis (blueness of
skin, •.ips, ears, finger nails beds) he should be provided with
ACTORIBS RULES, 1950
medical oxygen or oxygen carbondixide mixture, If needed, he
should be given artificial respiration. Oxygeo should be adminis
tered by a trained person only.
l[SCHEDULE XXVIII
Operations involving High Noise Levels
ll. Application.- This schedule shall apply to all operations
in any manufacturing process having high noise level,
2. J[))efinitions -For the purpose of this schedule,
(a) 0 Noise' means any unwanted sound.
(b) 'High noise level" means any noise level measured on
the A weighted scale is 90 dB or above.
(c) • Desibel • means one-tenth of �Bet' which is the
fundamental divisions of a logarithmic scale used to express the
ratio of two specified or implied quantities, the number of ' Bets v
denoting such a ration being the logarithm to the base of 1 of
this ratio. The noise level (or the sound pressure level) corres
ponds to a reference pressure of 20 X 10·6 newtons per square
meter or 0.0002 dynes per square centimeter which is the threshold
of hearing, that is the lowest sound pressure level necessary tCll
produce the sensation of hearing in average healthy listeners. The
decibel in abbreviated form is dB.
(d) " frequency" is the rate of pressure variations
expressed in cycles per second or hartz,
(e) 'dBA' refers to sound level in decibles as measured on
a sound level meter operating on the A-weighting net work with
slow meter response.
(/) ' A-weighting• means making graded adjustments in
the intensities of sound of various frequencies for the purpose of
noise measurement, so that the sound pressure level measured by
an instrument reflects the actual response of the human ear to the
sound measured.
3. P.Hiectioo against eofise.-(1) Io every factory, suitable
engineering control or administrative measures shall be taken to
ensure, so far as is ll'easonably practicable, that no worker is
exposed to sound levels exceeding the maximum permissible noise
exposure levels specified in Tables 1 and 2.
1 A.ddeci by o.o, Ms. No. 366
0
Labour, dated the 23rd February,
1985.
TAMIL NADU F
T,HLB 1
lP.!!RMISSIBLB EXPOSURB IN CASES OF CONTINUOUS NOISE.
R.951
Total time of exposure (continuous or a
number of short term exposures) per day,
in hours.
ff
6
4
3
2
Ii
:i.
3/4
1/2
1/4
Sound pressure level
in dBA..
90
92
95
97
JOO
102
105
107
110
l JS
Explanatlon.-(1) No exposure in excess of 1 1 5 dBA is to be
.permitted.
(2) For any period of exposure falling in between any
6gure and the next higher or lower figure as indicated in column
1, the permissible sound pressure level is to be determined by
extrapolation on a proportionate basis.
TABLE 2
PERMISSIBLE EXPOSURB LllV.l!LS OF IMPULSIVE OR IMPACT Noise
Peak sound pressure
level in dB.
140
135
130
l2S
120
Permitted number of impulses
or impacts per day.
100
315
1,000
3,160
10,000
ExJJlanation.-(l) No exposure in excess of 140 dB peak
1«>und pressure level is permitted.
(2) For any peak sound pressure level falling in between
11ny figure and the next higher or lower figure as indicated in
eolumn 1, the permitted number of impulses or impacts per day is
to be determined by extrapolation on a proportionate basis.
"fAMIL NADU FACTORIES RULl!S, 1950
TAMIL NAPU F;ACTORIBS RULBS9 1950 R.95]
f'.l) For the purposes of this schedule, if the variations in
the noise level involve maximum at intervals of one second or Jess,
the noise is to be considered as a continuous one and the_ criteria
given iu Table 1 would apply. In other cases, the �oi�e 1s. to be
considered as impulsive or impact noise and the criteria given in
the Table 2 would apply.
(3) When the daily noise exposure is composed of two or
more periods of noise exposure at diff erent levels their combined
effect should be considered, rather than the individual effect of
each. The mixed exposure should be considered to exceed the
limit value if the sum of the fractions
Cl C2 Cn
-- + -- + - ... exceeds unit p-1
ri T2 Tn
Where the Cl , C2, etc., indicate the total time of actual
exposure at a specified noise level and T I , T2, etc. denote the
time of exposure permissible at that level. Noise exposure of less
than 90 dBA may be ignored in the above calculation.
(4) Where it is not possible to reduce the noise exposure'
to the levels specified in sub-rule (1) by reasonably practicable
engineering control or administrative measures, the noise exposure
shall be reduced to the greatest extent feasible by sucli control
measures and each worker, so exposed shall be provided with
suitable ear protectors so as to reduce the exposure to noise to the
levels specified in sub-rule ( I).
(5) Where the ear protectors provided in accordance with
sub-paragraph (2) and worn by a worker cannot still attenuate the
noive reaching near his ear, as determined by substracting the
attenuation value in dBA of the ear protectors concerned from the
measured sound pressure level, to a level permissible under Table
J or fable 2 as the case may be, the noise exposure period shall be
suitably reduced to correspond to the permissible noise exposures
specified in sub-paragraph (1).
(6) (a) lo all cases where the prevailing sound - leve.fs
exceed the permissible levels specified in sub-paragraph ( I ) there
shall be administered an effective hearing conservation programme
which shall include among other bearing conservation meaures,
pre-employment and periodical audit surveys conducted on
workers exposed to noise exceeding the permissible levels, and
rehabilitation of such workers either by reducing the exposure to
the noise levels or by transferring them to places where noise levels
are relatively less or by any other suitable means.
(b) Every worker employed in areas where the noise
exceeds the maximum permissible exposure levels specified m
sub-rule (1) shall be subjected to an auditory examination by a Certifying
Surgeon within 14 days of his first employment and thereafter shall be
re-examined at least once in every 12 months. Such initial and periodical
examinations shall include tests which the Certifying Surgeon may con
sider appropriate, and shall include determination of auditory thresholds
for pure tones of 125, 250, 500, 1,000, 2,000, 4,000 and 8,000 cycles per
second.]
1
[SCHEDULE XXRX
Manufacture or manipulation of dangerous pesticides
1. Application. -- This schedule shall apply in respect of all factories
or any part thereof in which the process of manufacture or manipulation
of dangerous pesticide (hereinafter referred lo as the said manufacturing
process) is carried on.
2. Definition. -- For the purpose of this schedule --
(a) "dangerous pesticides" means any product proposed or used
for controlling, destroying or repelling any pest or for preventing growth
or mitigating effects of such growth including any of its formulations
which is considered toxic under and is covered by the Insecticides Act,
1968 and the rules made thereunder and any other products as may be
notified from time to time by the State Government ;
(b) "manipulation" includes mixing, blending, formulating, filling,
emptying, packing or otherwise handling ;
(c) "efficient exhaust draught" means localized mechanical ven
tilation for removal of smoke, gas, vapour dust, fume or mist so as to
prevent them from escaping into the air of any workroom in which work
is carried on. No exhaust draught shall be considered efficient if it fails
to remove smoke generated at the point where such gas, fume, dust,
vapour or mist originates from the processes ;
(d) "first employment" shall mean first employment in any
manufacturing process to which this schedule applies and shall also
include re-employment in the said manufacturing process following any
cessation of employment for a continuous period exceeding three calen
dar months ; and
1 Ins. byG.O. Ms. No. 885, Labour, dated the 8th May, 1986.
R.95] TAMIL NADU FACTORIES RULES, J.250
3. instruction to workers. -- Every worker on his first employment ,
shall be fully instructed on the properties including dangerous properties
of the chemicals handled in the said manufacturing process and the
hazards involved. The employees shall also be instructed in the measures
to be taken to deal with any emergency. Such instructions shall be
repeated periodically.
4. Cautionary notice and placards. -- Cautionary notices and
placards in the form specified in the Appendix to this Schedule and
printed in the language of the majority of the workers shall be displayed
in all work places in which said manufacturing process is carried on so
that they can be easily and conveniently read by the workers. Arrange
ments shall be made by the occupier and the manager of the factory to
periodically instruct the workers regarding the health hazards arising in
the said manufacturing process and methods of protection. Such notices
shall include brief instructions regarding the periodical clinical tests
required to be undertaken for protecting health of the workers.
5. IP'rohibition relating to employment of women or young persons.
-- No woman or young person shall be employed or permitted to work in
any room in which the said manufacturing process is carried on or in any
room in which dangerous pesticide is stored.
6. Food, drink and smoking prohibited. -- (1) No food, drink,
tobacco, pan or supari shall be brought into or consumed by any worker
in any workroom in which the said manufacturing process is carried out.
(2) Smoking shall be prohibited in any workroom in which the said
manufacturing process is carried out.
7. Pretective clothing and protective equipment. -- (1) Protective
clothing consisting of long pants and shirts or overalls with long sleeves
and head coverings shall be provided for all workers employed in the said
manufacturing process.
(2) (a) Protective equipment consisting of rubber gloves, gum
boots, rubber aprons, chemical safety goggles and respirators shall be
provided for all workers employed in the said manufacturing process.
I Omitted by G.O. Ms. Nci. 2223, L & E, dated the 6th October, 1988
TAMIL NADU FACTORIES RULES, 1950 [R.95
1[* * *]
(b) Gloves, boots, aprons shall be made from synthetic rubber
whe, c a pesticide contains oil. ·
(3) Protective clothing and equipment shall be worn by the
workers supplied with such clothing and equipment.
( 4) Protective clothing and equipment shall be washed daily from
inside and outside if the workers handle pesticides containing nicotine or
phosphorous and shall be washed frequently if handling other pesticides.
(5) Protective clothing and equipment shall be maintained in
good repair.
8. Floors and work-benches. -- (1) Floors in every work-room
where dangerous pesticides are manipulated shall be of cement or other
impervious material giving a smooth surface.
(2) Floor shall be maintained in good repair, provided with
adequate slope leading to a drain and thoroughly washed once a day with
hose pipe.
(3) Work-benches where dangerous pesticides are manipulated
shall be made of smooth, non-absorbing material preferably stainless
steel and shall be cleaned at least once daily.
9. Spillage and waste. -- (1) if a dangerous pesticide during its
manipulation splashes or spills on the work-bench, floor or on the protec
tive clothing worn by a worker, immediate action shall be taken for
thorough decontamination of such areas or articles.
(2) Cloth, rags, paper or other material soaked or soiled with a
dangerous pesticide shall be deposited in a suitable receptacle with tight
fitting cover. Contaminated waste shall be destroyed by burning at least
once a week.
(3) Suitable deactivating agents, where available shall be kept in
a readily accessible place for use while attending to a spillage.
( 4) Easy means of access shall be provided to all parts of the plant
for cleaning, maintenance and repairs.
R.95] TAMIL NADU FACTORIES RULES, 1950
(R.95
10. Empty containers used for dangerous pesticides. -- Containers
used for dangerous pesticides shall be thoroughly cleaned of their content
and treated with an inactivating agent before being discended or
destroyed.
11. Manual handling. -- (1) A dangerous pesticide shall be required
or allowed to be manipulated by and except by means of a long handled
scoop.
(2) Direct contact of any part of the body with a dangerous
pesticide during its manipulation shall be avoided.
12. Ventilation. -- (1) In every workroom or area where a dangerous
pesticide is manipulated, adequate ventilation shall be provided at all
times by the circulation of fresh air.
(2) Unless the process is completely enclosed, the following
operations during .manipulation of a dangerous pesticide shall not be
undertaken without an efficient exhaust draught --
(a) emptying a container holding a dangerous pesticide;
(b) blending a dangerous pesticide ;
(c) preparing a liquid or powder formulation containing ,
dangerous pesticide ; and
(d) changing or filling a dangerous pesticide into a container
tank hopper or machine or small sized containers.
(3) In the event of a failure of the exhaust or draught provided 01
the above operation, the said operations shall be stopped forthwith.
13. Time allowed for washing. -- (1) Before each meal and befor
the end of the day's work at least ten minutes in addition to the regule
rest interval shall be allowed for washing to each worker engaged in th
manipulation of dangerous pesticide.
(2) Every worker engaged in the manipulation of dangeroi
pesticides shall have a thorough wash before consuming any food and ah
at the end of the day's work.
\
TAMIL NADU FACTORIES RULES, 1950
R.95] TAMIL NADU FACTORIES RULES, 1950
14. Washing and bathing facilities. -- (1) There shall be provided
and maintained in a clean state and in good repair for the use of all
workers employed in the factory where the said manufacturing process
is carried on, adequate washing and bathing places having a constant
supply of water under cover at the rate of one such place for every 5
persons employed.
(2) The washing places shall have stand pipes placed at intervals
of not less than one metre.
(3) Not less than one half of the total number of washing places
shall be provided with bathrooms.
( 4) Sufficient supply of clean towels made of suitable material
shall be provided :
Provided that such towels shall be supplied individually for each
worker if so ordered by the Inspector.
(5) Sufficient supply of soap and nail brushes shall be provided.
15. Cloakroom. -- There shall be provided and maintained for the
use of all workers employed in the factory where the said manufacturing
process is carried on --
(a) a cloakroom for clothing put off during working hours with
adequate arrangements for drying clothing, if wet ; and
(b) separate and suitable arrangements for the storage of protec
tive clothing provided under paragraph 7.
16. Messroom. -- (1) There shall be provided and maintained for the
use of all workers employed in the factory in which the said manufacturing
process is carried on and remaining on the premises during the rest
intervals, a suitable messroom which shall be furnished with --
(a) sufficient tables and benches with back rest, and
(h) adequate means for warming food.
(2) The mess room shall be placed under the charge of a respon
sible person and shall be kept clean.
[R.95
17. Manipulation not to be undertaken. -- Manufacture or
manipulation of a pesticide shall not be undertaken in any factory unless
a certificate regarding its dangerous nature or otherwise is obtained from
the Chief Inspector.
1[18. Medical facilities and records of examinations and tests . -
(1) The occupier of every factory to which the schedule applies, shall--
(a) employ a qualified Medical Practitioner for medical sur
veillance of the workers employed therein whose employment shall be
subject to the approval of the Chief Inspector of Factories ; and
(b) provide to the said medical practitioner all the necessary
facilities for the purpose referred to in clause (a).
(2) The record of medical examinations and appropriate tests
carried out by the said medical practitioner shall be maintained in a
separate register approved by the Chief Inspector of Factories, which
shall be kept readily available for inspection by the Inspector:
19. Medical Examination by Certifying Surgeon • -- (1) Every
worker employed in the processes mentioned in paragraph 1 shall be
examined by a Certifying Surgeon within 15 days' of his first employment.
Such examination in respect of HalogenatedPesticides, shall include tests
for determination of the chemical in blood and in fat tissues, EEG
abnormalities and memory tests, in respect of organo phosphorous com
pounds, such examination shall include test for depression of
cholinesterase in plasma and red blood cells. No worker shall be allowed
to work after 15 days of his first employment in the factory unless certified
fit for such employment by the Certifying Surgeon.
(2) Every worker employed in the said processes shall be re
examined by a Certifying Surgeon at least once in every six calendar
months. Such examinations shall, wherever the Certifying Surgeon con
siders appropriate, include the tests specified in sub-paragraph (1).
Further every worker employed in the said processes shall also be ex
amined once in every three months by the factory Medical Officer.
(3) The Certifying Surgeon after examining a worker, shall issue
a certificate of fitness in Form 27. The record of examination and re-ex
aJr,inations carried out shall be entered in the Certificate and�he Certifi
.Subs. by G.O. Ms. No. 2223, Labour and Employment, dated the 6th October, 1988.
TAMIL NADU FACTORIES RULES, 1950
R.95] TAMIL NADU FACTORIES RULES, 1950
cate shall be kept in the custody of the Manager of the Factory. The record
of each examination carried out under sub-paragraphs (1) and (2),
including the nature and the results of these tests, shall also be entered
by the Certifying Surgeon in a Health Register in Form 17.
( 4) The Certificate of Fitness and the health register shall be kept
readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a
worker is no longer fit for employment in the said processes on the ground
that continuance therein would involve special danger to the health of the
worker, he shall make a record of his findings in the said certificate and
the Health Register. The entry of his findings in those documents should
also include the period for which he considers that the said person is unfit
to work in the said processes. The person so suspended from the process
shall be provided with alternate placement facilities unless he is fully
incapacitated in the opinion of the Certifying Surgeon, in which case the
person affected shall be suitably rehabilitated.
(�) No person who has been found unfit to work as said in sub
paragraph (5) shall be re-employed or permitted to work in the said
processes unless the Certifying Surgeon, after further examination, again
certifies him fit for employment in those processes.]
20. Exemption. -- If in respect of any factory the Chief Inspector is
satisfied that owing to the exceptional circumstances or the infrequency
of the said manufacturing process or for any other reason which he shall
record in writing all or any of the provisions of this schedule are not
necessary for the protection of the workers employed in the factory, he
may, by a certificate in writing exempt such factory, from all or any of the
provisions on such condition as he may specify therein, such certificate
may at any time be revoked by the Chief Inspector after recording his
reason therefor.
Previous and next
Questions people ask
Is appendix B of the Tamil Nadu Factories Rules,1950 still in force?
No repeal of the Tamil Nadu Factories Rules,1950 is recorded.