Regulation 49, Indian Boiler Regulations, 1950: (a) Tensile Test
Indian Boiler Regulations, 1950 - Regulation 49
Text of regulation 49
(a) Tensile Test
49. (a) Tensile Test—Test pieces out from the ends of tho selected tubon shall
comply with tho following requirements:—
—
Strips flit from tubes tind timtod in their
curvnd condition.
Testi LoiigtliH tuknn from fniwhod tubes
(en<ln oftnboH to be plugged for gripw).
Ultimuto T«mile Htrima
in tonn p«r sq. in
Not lorn than
27
2r,
Not more
thtin
33
33
Minimum elonfjution
per oont. on M mches
1/4* tdk'k
ami ovor
10
23
LOHH than
1/4" thick
17
21
(b) Flattening Test.—A ring not less than 2 inches in length out from one ond
of each selected tube shall be flattened between two parallel flat surfaces, the width
of which shall be not less than 1J times the diameter of the tubo. When the pTessure
is released, tho interior surfaces of the test piece (at the middle) shall remain at a
distance apart of not more than three timos the specified thickness of the tube and
the test piece ahaII then show no sign of crack or flaw.
(e) Expanding Tests.—Tho tubes shall withniaml expanding by a drift expander
having a total included angle of between 40" and 60° (20° to 30" each sido) to the
following increases in external diameter without showing crack or flaw :—7
Thk'kiiHHH of tube
]0 S.W.G. ftnd thinner
Thinner than 9 S.W.G-. up to un<l mcluriiup: 0 S.W.U. .
Thinker than fl S.W.Q
Inert a«iH in rlitimetor
pur i-ent.
12J
«i
Previous and next
Questions people ask
Is regulation 49 of Indian Boiler Regulations, 1950 still in force?
No repeal of Indian Boiler Regulations, 1950 is recorded.