Regulation 48, Indian Boiler Regulations, 1950: (a) Material
Indian Boiler Regulations, 1950 - Regulation 48
Text of regulation 48
(a) Material
48. (a) Material.—The 1ubos whaJl bo manufactured from steel produoed by
the Open Hearth or Elootrio processes and shall conform to the following limits of
chemieal compositions:—
I'arbon . . . . . . . . 0 15% maximum
Mmnganemi . . . . 0 4 0 to 0-70%
Silioon . . . - 0 1 0 toO -38%
Sulphur . • • • . 00.1% maximum
TUoaphorua . . . . . 0 0 6 %
Molyodouum 0-4"> to !• 63%
The steelmaker shall supply a certificate of the normality of the steel.
(b) Heat Treatment.—The tubes shall be normalised at a temperature bet-ween
1688°F (920° C) and 1760° F (960° C).
(o) Workmanship and toleranoe.—The tubes shall be well finished, 'olean and
free from harmful defects. They shall bo reasonably straight, smooth, cylindrical,
and subject to the following tolerances before bending :—
(t) Diameter.—The external diameter of the tubes measured at any point shall
be within the following tolerances of the diamoter specified :•—
Type of Tube
Hot finished .
Cold drawn
Ontsidn Diameter of Tube
"Up to and including '2^ in.
Over 21 in
A l l 4 1 / l t N . . . . . .
Tolerance
-i 1/04 in.
— 1/32 in.
± 1%
+ 0
- 1 %
(ii) Thiokne«S.~The thickness of the tubes shall be within the following toler-
anoea:—
T y p e of T u b e
Hot . finished .
Oold d r a w n
Outsiclo D i a m e t e r of T u b e
U p to tincl inc lud ing 2J in. . . .
Ovor 2-J in.
A l l H i / e ^ . . . . . .
Toleranue
+ Mt%
- 7 i%
H 115%
- 5 %
H 10%
- «%
Where the ends of the tubes are swelled or reduced the thicknopis at the ends
may be decreased below or increased, nbove the nominal thickness of the tubes by
an amount in proportion to the pereontage of such swelling or reduction and, in
addition to thi'i allowimee. the 1oVrane.es relating to thickness shall also apply.
Swelling or reduction sha.il \m carried out before the heat treatment specified in
Regulation 48(b).
(iii) Length.—The tubes shall bo no1 less than the nominal longth but raay
exceed it by the amount given below :•—
"Up to imd inclnrhng 30 it
£>vpr !J0 ft. , . .
1/8 in.
1/4 in.
x. .. UAZ,. ±1JS On J.NDIA -TJAi-JtAU. JJ1 . A. „,. [..AfitFiX
(d) Seleotion oi tubes for testing—After heat treatment, tho tubes shall bo
presented foi1 mechanical teHting in accordance with Regulations 49(a), 49(b) ami
49(c) in batches of not more than 100 of the same nominal diameter and thickness.
Tho manufacturer shall provide at his own expense extra tubes at, the rate of
2 per cent, of each diameter and thickness of tube specified and thi-> ]nsi~»oetiiig
Offioer shall select for 1 est such of the tubes as he may think proper to the extent of
the percentage mentioned. Should the number of tubes ouleied of any one nominal
size exceed 400 then, for every 100 tubes or part thereof above that number, one
additional tube shall be provided. The .samples for testing shall not bo heat-treated
after selection.
Previous and next
Questions people ask
Is regulation 48 of Indian Boiler Regulations, 1950 still in force?
No repeal of Indian Boiler Regulations, 1950 is recorded.