LawGrids logoLAWGRIDS.ORG

Regulation 189, Indian Boiler Regulations, 1950.: Dished ends subject to internal pressure

Indian Boiler Regulations, 1950. - Regulation 189

Text of regulation 189

Dished ends subject to internal pressure

189. Dished ends subject to internal pressure.—(a) 3Tor unstayed ends of steam and water drums, tops of vertioal boilers, etc, when dished to partial spherical form the maximum working pressure shall be determined by the following formula :— 15xSx( t - l ) W.P. =o Eqn. (24) R W.P. ia the working pressure in lbs. per square inoh, t is the thickness of end plates in 32nds of an inch, R is the inner radius of ourvature of the end in inohes, which shall not exceed the diameter of the shell to which it is attached, S is the minimum tensile breaking strength of plate in tons per square inoh, or whatever is allowed for it. (b) The inside radius of curvature at the flange shall be not less than 4 times the thickness of the end plate, and in no case less than 2 | inob.es, (c) When the end has a manhole in it (t—5), shall be substituted for (t—1) In the formula. (d) In the oaae of the eleotrode boilers where the attachment of ends is permitted %j fillet welding as per Regulation 104(d), for oo-effioient 15, the co-efficient 10 ehafl be substituted. (e) The total depth of flange of manhole from the outer surface in Inohei measured on the minor axis shall be at least equal to— •v/TxW=deptb of flange in inohea Eqn. (28) where T is the thickness of the plate in inohes and W is the minor axis of the hole |n inches. NOTB.—The foregoing provisions shall not precludo the u«e of diahed encta in compliance with Begs. 275 to 278 whore not fitted with an up-take. • I H P , U t A t i n ' l l m O _ r I N D I A . E J A 1 ± E A O E D I N A R Y [ P A J I T H

Previous and next

All provisions of Indian Boiler Regulations, 1950.

Questions people ask

Is regulation 189 of Indian Boiler Regulations, 1950. still in force?

No repeal of Indian Boiler Regulations, 1950. is recorded.