LawGrids logoLAWGRIDS.ORG

Regulation 185, Indian Boiler Regulations, 1950.: Circumferential and End Seams of Water Tube Boilers

Indian Boiler Regulations, 1950. - Regulation 185

Text of regulation 185

Circumferential and End Seams of Water Tube Boilers

185. Circumferential and End Seams of Water Tube Boilers.—The suitability of eirournferential seams inducting the seams joining ends to shells shall be verified by the following formula :— ' K x J x ( t - 2 ) is equal to or greater than WP . . . Eqn. (17) DxC K -= 160 for 26/30 tons tensile plates. K. = 157 for 28/32 tons tensile plates. Due to higher stresses, see Reg. 271 and 340. WP =• Tho working pressure in lbs. per sq. in. D = The diameter of shell in inches, measured inside the outer ring of plates. J Circumferential Joint effioienoy calculated by Eqns. 2 or 3. C — 8-24 where tho seams are made with lap joints and are treble riveted = 8 41 where the seams are made with lap jointu and are double riveted — 9-60 where the seams are made with lap joints and are single riveted. t — thickness of plate in 32nds of an inch.

Previous and next

All provisions of Indian Boiler Regulations, 1950.

Questions people ask

Is regulation 185 of Indian Boiler Regulations, 1950. still in force?

No repeal of Indian Boiler Regulations, 1950. is recorded.