LawGrids logoLAWGRIDS.ORG

Regulation 123, Indian Boiler Regulations, 1950.: Furnaces of Vertical Boilers

Indian Boiler Regulations, 1950. - Regulation 123

Text of regulation 123

Furnaces of Vertical Boilers

123. Furnaces of Vertical Boilers.—(a) The vertical portion shall be in one plate and shall be bent to oircular form in a similar manner to the shell plates. (b) Circular furnaces shall preferably be tappered, a taper of 1J in. in diameter per 1 foot of height being recommended. The minimum water spaco at the bottom between the furnaces and the shell shall not be less than 2 in. for boilers up to 2 ft. 6 in. in diameter and shall be not less than 2J in. for boilers over 2 ft. 6in. in diameter. (o) Where hemispherical furnace crowns are pressed from one plate they shall be pressed to form by machine in progressive stages without thinning and on oom- pletion shall be annealed. (d) Ogee flanging where integral with the firebox or in a separate ring shall preferably be formed at one heat by suitable machinery and shall be allowed to cool gradually to avoid internal stresses, (e) Furnaces of vertical type boilers may be attached to the shell at the fire" hole by a solid rectangular section steel ring riveted together or by a circular ring of substantial section fusion welded to shell and firebox. Where the latter cons- truction is employed the opening in the shell for fireholc shall be substantially com- pensated by a i ing welded on the outside of the shell plate. (f) At the firehole the firebox plate and the shell plate may be flanged and fusion welded together. SEC. 8] THE GAZETTE OF INDIA EXTBAOBDINAIU 64»

Previous and next

All provisions of Indian Boiler Regulations, 1950.

Questions people ask

Is regulation 123 of Indian Boiler Regulations, 1950. still in force?

No repeal of Indian Boiler Regulations, 1950. is recorded.