Regulation 19, Indian Boiler Regulations, 1950.: Bend. Testa
Indian Boiler Regulations, 1950. - Regulation 19
Text of regulation 19
Bend. Testa
19. Bend. Testa.—(a) Cold Bends.—Test pieces shall bo sheared lengthwise or
crosswise from plates or bnrs, and shall not be less than 1 | inches wide, but for small
bars the whole soetion may be used. For rivet bars bend tests aro Hot required,
(b) In all cold bend tests, on samples 0" 5 inch in thickness and above., tho rough
edge or arris caused by shearing may be removed by filing or grinding, and samples
1 inch in thiokness and above, may have the edges maohinod, but the test pieces shall
receive no other preparation. The test pieoos shall not be annoaled unless the material
from which they are out is similarly annealed in which case tho test piece shall be
Similarly and simultaneously treated with tho material boforo testing.
(o) For oold bend tests the test pieoe shall withstand, without fracture, being
doubled over until tho internal radius is equal to 1£ times the thickness of the test
pieoe and the sides are parallel.
(d) For small sectional material these bond tests nmy be made from the flatten-
ed bar.
(e) Bond tests may be made either by pressure or by blows.
Previous and next
Questions people ask
Is regulation 19 of Indian Boiler Regulations, 1950. still in force?
No repeal of Indian Boiler Regulations, 1950. is recorded.