Rule 6, The Punjab Distillery Rules, 1932: Limit of saturated hydrocarbons
The Punjab Distillery Rules, 1932 - Rule 6
Text of rule 6
Limit of saturated hydrocarbons
6. Limit of saturated hydrocarbons. - At least 70 per cent of the light caoutchoucine should be
soluble in concentrated sulphuric acids. For testing this 25 c.c. should be measured off into a tapped
and stoppered separating cylinder of suitable capacity and sulphuric acid should be added at first
with great care, and in very small quantities. After each addition of acid the cylinder should be
shaken and cooled to avoid loss of volatile constituents. Sufficient acids must be used usually about
50 c.c. for the high coloured layer to become quite fluid so that it can separate readily from the
upper layer of unattacked constituents. After a final through shaking and cooling, the cylinder should
be left for about three hours to effect complete separation of the two layers and the lower layer be
then tapped off. The almost colourless upper layer should be again shaken with strong sulphuric acid
until it appears free from soluble constituents (as judged by the colour imparted to the sulphuric
acid) and separated as before after standing. It should finally measure not more than 7 c.c.'s. The
acid used should be of specific gravity 1.84, and may be of commercial quality.
Previous and next
Questions people ask
Is rule 6 of the Punjab Distillery Rules, 1932 still in force?
No repeal of the Punjab Distillery Rules, 1932 is recorded.