LawGrids logoLAWGRIDS.ORG

Rule 138, THE CENTRAL MOTOR VEHICLES RULES, 19891: Signals and additional safety measures for Tmotor vehicle]

THE CENTRAL MOTOR VEHICLES RULES, 19891 - Rule 138

Text of rule 138

Signals and additional safety measures for Tmotor vehicle]

138. Signals and additional safety measures for Tmotor vehicle].—(1) The driver of a 379[motor vehicle] shall make such signals and on such occasions as are specified in the regulations made under section 118. (2) The driver of a motor cycle shall, in addition to the safety measures mentioned in sub-section (1) of section 128, comply with the requirements of rule 123. 380[ 381[(3) In a motor vehicle, in which seat-belts have been provided under sub-rule (1) or sub-rule (1-A) of rule 125 or rule 125-A, as the case may be, it shall be ensured that the driver, and the person seated in the front seat or the persons occupying front facing rear seats, as the case may be, wear the seat belts while the vehicle is in motion.] 379 . Substituted by G.S.R. 214(E), dated 18-3-1999, for "motor cycle" (w.e.f. 18-3-1999). 380 Inserted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999). 381 Sub-R. (3) substituted by G.S.R. 699(E), dated 10-10-2002 (w.e.f. 10-10-2002). 382 Inserted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31-5-2002). 383 Proviso inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-3-2006). (4) On and after expiry of one year from the date of commencement of the Central Motor Vehicles (Amendment) Rules, 1999, the driver of every vehicle shall ensure that the following items are carried in the vehicle, namely:— (a) in case of vehicles other than motor cycles, a set of spare bulbs for headlamp and fuses, and a spare wheel ready for use; (b) tool kit as prescribed by the manufacturer; (c) triangles of size 150 mm with a red reflecting surface as per IS: 8339— 1993 specified by the Bureau of Indian Standards, for keeping in front and rear of the vehicle in case the vehicle is stranded on the road (applicable to vehicles other than two,and three-wheelers); as specified below, namely:— one triangle in case of four-wheelers with GVW not exceeding 7.5 tons; two triangles in case of four-wheelers with GVW exceeding 7.5 tons: 382[Provided that in case of vehicles manufactured on and after 1st January, 2003, the triangles of size and specification shall conform to AIS : 022-2001, as may be amended from time to time, till such time as corresponding Bureau of Indian Standards specifications are notified:] 383[Provided further that in addition, M3 and N3 category of vehicles shall also be required to install retro-reflective triangle complying to AIS:022:2001 as amended from time to time, excluding the requirements specified in clauses 7.2,7.3,7.4,7.7, 8.1.2 and 165 5.0,6.0,11.0 of Annexure 4 of the said standard. The colour of the triangle fitted in the front of the vehicle shall be white and that of rear shall be red. The location of both the triangles shall be at least one meter above the ground level at the front and rear, preferably at the centre of the vehicle. For the purposes of "white colour warning triangle", the word "red" shall be substituted by word "white", wherever applicable in AIS:022:2001. The colour requirements of white retro-reflective portion shall be as per clause 8.5 of AIS:057 and white fluorescent material shall be as per clause 7.1 of ISO:7591-82(E);] (d) first-aid kit containing a tube of antiseptic cream containing 0.5% of Centrimide B.P. in a non-greasy base, sterilised dressings, sterlised elastic plaster, waterproof plaster, gauze and elastic bandage for wounds and burns, (e) number of chock blocks for four-wheelers as specified below, namely:— one chock block in case of four-wheelers with GVW exceeding 4 tons and less than 7.5 tons; two chock blocks in case of 4-wheelers with GVW exceeding 7.5 tons; The vehicle manufacturer shall ensure that the above items are supplied at the time of first sale of vehicle; 384[(f) at the time of purchase of the two wheeler, the manufacturer of the two wheeler shall supply a protective headgear conforming to specifications prescribed by the Bureau of Indian Standards under the Bureau of Indian Standards Act, 1986 (63 of 1986): Provided that these conditions shall not apply to category of persons exempted in terms of section 129 and the rules made thereunder by the concerned State Government. ] (5) Halogen bulbs with P45t cap shall not be used for headlights on all vehicles. Wattage of halogen bulbs shall not exceed 70/75 watts for 24 volts and 60/65 for 12 volts systems.]

Previous and next

All provisions of THE CENTRAL MOTOR VEHICLES RULES, 19891

Questions people ask

Is rule 138 of THE CENTRAL MOTOR VEHICLES RULES, 19891 still in force?

No repeal of the CENTRAL MOTOR VEHICLES RULES, 19891 is recorded.