Rule 128, THE CENTRAL MOTOR VEHICLES RULES, 19891: Tourist vehicles other than motor cabs, etc
THE CENTRAL MOTOR VEHICLES RULES, 19891 - Rule 128
Text of rule 128
Tourist vehicles other than motor cabs, etc
128. Tourist vehicles other than motor cabs, etc.—A tourist vehicle other than motorcab,
taxicab, campers van house trailer, shall conform to the following specifications,
namely:—
363[(1) The dimension shall conform to the dimensions specified in rule 93.]
(2) Structure.—Structure of the tourist vehicle should be sturdy and strong structural
frame work using suitable material of adequate sectional area and an aerodynamical
shape. For exterior panelling, aluminium sheet or good quality panelling material should
be used. As regards interior panelling it should cover the entire interior roof, sides, back
and bulk head portions. The body should be made completely leakproof and dustproof.
The vehicle should also be rattle proof. Sound deadening should also be done for all
panelling including the floor.
364[(3) Passenger entrance and exit.—The passenger entrance-cum-exit door shall be
located on the left side of the vehicle and minimum door width shall be 685 millimetres.
The door handle should be capable of being handled from inside as well as from outside.
The door may be operated pneumatically or hydraulically or electrically with suitable
locking devices.]
365[(4) Emergency exit.—The emergency exit provided on the tourist vehicle shall meet
the following requirements, namely:—
(i)be clearly marked "EMERGENCY EXIT" in bold letters on the inside and the
outside of the tourist vehicle;
137
(ii) be so designed as to open from inside and the outside of the tourist vehicle;
(iii) be equipped with a fastening device which can be quickly released but so
designed as to offer protection against accidental release;
(iv) be easily accessible to persons of normal height standing on the ground
outside the vehicle;
(v) be easily accessible to the passengers;
(vi) be such that no seat or other object placed in the vehicle shall restrict the
passage to the emergency door;
(vii) be located either at the back or on to the right hand side of the vehicle; and
(viii) emergency exist may be provided in the form of a window with breakable
glass. In such cases, a suitable device shall be provided at a convenient place to
break open the glass in the event of an emergency.]
(5) Driver entry and exit.—A separate door with suitable sliding window shall be
provided for the driver near the driver seat.
(6) Windscreen.—(i) The front windscreen shall be of clear view and distortion free, with
safety glass and shall be of full width of the tourist vehicle. If made in two halves, the
width of the centre vertical joint, inclusive of the rubber glazing fitment of the front
windshield shall be such as to enhance the elegance of the tourist vehicle.
(ii) Rear windscreen shall be of safety glass or laminated safety glass. It shall match with
the windows provided on the vehicle. Sliding curtains shall be provided on the rear
windscreen.
(7) Windows.—Windows of tourist vehicles should have a minimum space of 14.25
millimetres and shall be of safety or laminated safety glass.
Windows shall be of double sliding type slider running smoothly in channels without
rattle. All safety or laminated safety glasses used for windows should conform to
standards laid down by the Bureau of Indian Standards. Windows shall be provided with
sliding curtains.
(8) Ventilation.—Adequate arrangements shall be provided for ventilation for the
passenger compartment as well as the driver compartment. All ventilators and windows
shall be such that when closed they will not permit ingress of rain water or dust in the
passenger or driver compartment.
(9) Luggage.—(i) Luggage holds shall be provided at the rear or at the sides, or both, of
the tourist vehicle with sufficient space and size, and shall be rattleproof, dustproof and
waterproof with safety arrangements;
138
(ii) The light luggage racks, on strong brackets shall be provided inside the passenger
compartment running along the sides of the tourist vehicle. Except where nylon netting is
used, the under side of the rack shall have padded upholstery to protect the passengers
from an accidental hit. The general design and fitment of the rack shall be so designed
as to avoid sharp corners and edges.
(10) Seats and seating arrangements.—366[* * *]
(11) Seating layout shall be 367[two and two or one and two or one and one] on either side,
all seats facing forward, with a clear gangway of at least 355
366 Sub-Cl. (z) omitted by G.S.R. 933(E), dated 28-10-1989 (w.e.f. 28-10-1989).
367 Substituted by G.S.R 933(E), dated 28-10-1989, for "two and two" (w.e.f. 28-10-1989),
millimetres width at the centre. Each passenger seat shall have a minimum area of 447
millimetres x 457 millimetres and an arm rest on both sides and seat back of full height.
(iii) The seat frames shall be sturdy, properly finished and so mounted as to transfer the
weight directly to the structural members of frame-work. The seats shall be of reclining
type and adjustable.
(iv) The seats shall be so mounted as to provide at least 280 millimetres leg room from
the front of the rear seat to the back of the front seat. A foot rest at suitable location and
height shall be provided for every passenger.
(11) Painting and finishing.—The tourist vehicle shall be painted in a manner referred to
in sub-rules (7) and (8) of rule 85-A in white colour with a blue ribbon of five centimetres
width at the centre of the exterior of the body.
(12) Lighting.—(i)(a) The passenger compartment shall be adequately illuminated.
(b) Arrangement shall be provided to eliminate reflection of the light from the passenger
compartment on the windscreen.
(c) In addition to the lights in passenger compartment, at least two night-lights with
coloured domes, shall be provided in the passenger compartment.
(ii) Front and rear destination boxes, if provided, shall be illuminated.
(iii) One independently operated light fitting shall be provided for illumination of the
driver's or attendant's seat area.
(iv) A light fitting shall be provided for illuminating the steps at the passenger entrance
door.
(7;) Each luggage hold shall have a light fitting for illumination of that hold.
(vi) Wiring in the passenger compartment shall be with low tension cable conforming to
IS: 2465 of size commensurate with the estimated current loading. The wires shall be
139
carried in PVC sleevings or conduit or casing of adequate size. When any wire passes
through a hold in a panel or sheet metallic components, a rubber grommet of adequate
size shall be provided for protection of the insulation.
(13) Fittings and accessories.—A tourist vehicle shall be equipped with the following,
namely:—
(1) Convex rear view mirrors one on each side, universally adjustable and of adequate
dimensions.
(ii) First-aid box with glazed front, with necessary medicines for first-aid.
(iii) Fire extinguisher, dry powder type located near the engine compartment.
(iv) Insulation on interior or exterior of the engine bonnet for reducing the noise and heat
from the engine.
(v) Provision for locating vehicle tools securely.
(vi) Heavy duty windscreen wiper system.
(vii) Adjustable sunvisors of adequate size for the driver and for the attendant.
(viii) Electrically operated wide indicators or blinkers, stop lights and parking lights.
(ix) Dual head lamps.
(x) Suitable illumina tion for the registration number plate at the rear.
(xi) Horn.
(xii) Electric fans, of 8 inches* sweep adjustable, at least eight in number, suitably
spaced in the passenger compartment and controlled by switches located near the seat.
(xiii) Electric bell or buzzer located near the seat of driver or attendant and operated by
at least four push button controls placed at suitable location in the passenger
compartment.
(xiv) Ash trays near passenger seats of a design convenient for cleaning them at
intermediate stops of the tourist vehicle.
(xv) Drinking water and ice-box.
(xvi) Rack for magazines and other reading material.
(xvii) Back pockets and numbers for each seat.
(xviii) Public address system with at least four speakers suitably located in the
passenger compartment.
(xix) Document frame, located near the seat of driver, for carrying vehicle documents,
tax token, licence and permit.
(xx) Mud flaps for front and rear wheels:
140
368[Provided that the provisions of clauses (2) and (7), sub-clause (iv) of clause (12),
sub-clauses (ix), (xii) and (xiii) of clause (13), of this rule shall not apply to the vehicles of
integral construction.]
369[128-A. Special provision for M3 category of vehicles.—The provisions of sub-rule (4)
of rule 128 shall apply to all M3 category of vehicles.]
Previous and next
Questions people ask
Is rule 128 of THE CENTRAL MOTOR VEHICLES RULES, 19891 still in force?
No repeal of the CENTRAL MOTOR VEHICLES RULES, 19891 is recorded.