LawGrids logoLAWGRIDS.ORG

Rule 124, THE CENTRAL MOTOR VEHICLES RULES, 19891: Safety standards of components

THE CENTRAL MOTOR VEHICLES RULES, 19891 - Rule 124

Text of rule 124

Safety standards of components

330[124. Safety standards of components.—331 332[(1) The Central Government may, from time to time, specify, by notification in the Official Gazette, the standards or the relevant standards specified by the Bureau of Indian Standards of any part, component or assembly to be used in the manufacture of a vehicle including construction equipment vehicle and the date from which such parts, components or assemblies are to be used in the manufacture of such vehicle and on publication of such notification every manufacturer shall use only such of these parts, components or assemblies in manufacture of the vehicle:] 332[Provided that any notification issued under this sub-rule before the commencement of the Central Motor Vehicles (6th Amendment) Rules, 2001, shall not be applicable after such commencement upto and including 333[26th August, 2002] in respect of any construction equipment.] 130 334[(1-A) 334 335 336 337 338 339[On and from 1st May, 2003], the general requirements of vehicle rear under run protecting device and the technical requirements of vehicle lateral protection side shall be as per IS: 14812-2000 specifications and as per IS: 14682-1999, respectively, as may be amended from time to time:] 334 Inserted by G.S.R. 400(E), dated 31-5-2002 (31-5-2002). 335 Substituted by G.S.R. 845(E), dated 27-12-2002, for "On and from 1st January, 2003" (w.e.f. 27-12-2002). 336 Provisos inserted by G.S.R. 589(E), dated 16-9-2005 (w.e.f. 16-3-2006). 337 Substituted by G.S.R. 214(E), dated 18-3-1999 (w.e.f. 18-3-1999). 338 Inserted by G.S.R 221(E), dated 28-3-2001 (w.e.f. 28-3-2001). 339 Inserted by G.S.R. 111(E), dated 10-2-2004 (w.e.f. 10-8-2004) and as corrected by vide G.S.R. 176(E), dated 5-3-2004. 336[Provided that the vehicle manufacturers shall ensure the fitment of the rear under run protective device in vehicles of categories N2, N3 and their trailers except special purpose vehicles namely tractors and tippers at their end and lateral under run protective device either at their factory or at their dealer's end. Vehicle not fitted with such devices shall not be registered under these rules. They shall also ensure to supply necessary kits if the fitment is not done by them in the case of lateral under-run protective device. Provided further that the rear under run protective device shall also be painted with yellow and white zebra stripes on the entire rear face of the device.] 337[(2) Every manufacturer shall get the prototype of the part, component or sub­ assembly for which standards have been notified, approved from any agency as referred to in rule 126 or the Central Institute of Road Transport, Pune, or in case of compliance with notified Indian Standards from any laboratory duly authorized by the Bureau of Indian Standards. On the basis of such approval, every manufacturer shall also certify compliance with the provisions of this rule in Form 22.]] 338[(3) The Central Government may, by notification in the Official Gazette, frame a scheme for marking to be affixed on any part or component or assembly to be used in the manufacture of the vehicle and specify the date from which such parts, components or assemblies are to be used in the manufacture of the vehicle.] 339[124-A. Safety standards of components for agricultural tractors.— (1) The bulbs of the following lamps used on agricultural tractors shall conform to IST606-1979, as amended from time to time. (a) Head light main and dip; (b) Parking light; (c) Direction indicator lamp; 131 (d) Tail lamp; (e) Reversing lamp; (f) Stop lamp; (g) Rear Registration mark indicating lamp; and (h) Top light. (2) The lighting and light signalling devices for agricultural tractor shall be in accordance with AIS:030, as amended from time to time, till such time the corresponding BIS standard is notified: Provided that the performance requirements of the lighting, light signalling and indicating systems of agricultural tractor manufactured on and from 57[ 1st October, 2005] shall be in accordance with safety standard AIS:062, as amended from time to time, till such time corresponding BIS standards are notified. (3) The hydraulic brake hoses wherever used in agricultural tractor and its trailer shall be in accordance with IS:7079-1995, as amended from time to time. (4) The vegetable, non-mineral based hydraulic fluids wherever used in agricultural tractor shall be in accordance with IS:8654-1986, as amended from time to time. (5) The tow hook wherever used in agricultural tractor shall be in accordance with IS:12362 (Part 2), as amended from time to time. (6) The fuel tanks of agricultural tractor shall comply with the requirements laid down in IS: 12056-1987, as amended from time to time: Provided that the clause 3.2.1 of IS:12056-1987 be exempted for agricultural tractor that have a gravity feed fuel flow system. (7) The wheel nuts and hub caps used in agricultural tractor shall be in accordance with IST3941-1994, as amended from time to time.] 58[124-B. Safety Standards of components for power tillers.—(1) The lamps and bulbs used on power tillers for— (a) the head light main and dip; (b) the parking light; (c) the direction indicator lamp; (d) the tail lamp; (e) the reversing lamp; (f) the stop lamp; (g) the rear Registration mark illuminating lamp, shall be in accordance with AIS:034:2004 as amended from time to time till the corresponding BIS 132 specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of 1986). (2) The lighting and signaling devices shall be in accordance with AIS:062:2004 as amended from time to time, till the corresponding BIS specifications are notified under the Bureau of Indian Standards Act, 1986 (63 of 1986). (3) The safety and comfort of the operator of a power tiller shall be in accordance with IST2239 (Part 3):1996, as amended from time to time. (4) The gradeability of a power tiller coupled to a trailer under the declared combination weight by the manufacturer shall be in accordance with IS:9980:1988, as amended from time to time.]

Previous and next

All provisions of THE CENTRAL MOTOR VEHICLES RULES, 19891

Questions people ask

Is rule 124 of THE CENTRAL MOTOR VEHICLES RULES, 19891 still in force?

No repeal of the CENTRAL MOTOR VEHICLES RULES, 19891 is recorded.