LawGrids logoLAWGRIDS.ORG

Rule 98, THE CENTRAL MOTOR VEHICLES RULES, 19891: Steering gears

THE CENTRAL MOTOR VEHICLES RULES, 19891 - Rule 98

Text of rule 98

Steering gears

98. Steering gears.—(1) The steering gear of every motor vehicle shall be maintained in good and sound condition, free from back-lash exceeding 30 degrees on the steering wheel, all 174 175 176[ball joints connecting the steering linkage,] shall be protected by rubber caps and where the connections are secured with bolts or pins, the bolts or pins shall be effectively locked. 174 Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993). 175 Sub-R. (2) substituted by G.S.R. 111(E), dated 10-2-2004 (w.e.f. 10-8-2004). 176 Sub-R.(3) substituted by G.S.R. 400(E), dated 31-5-2002 (w.e.f. 31-5-2002). 177 Substituted by G.S.R. 845(E), dated 27-12-2002, for "On and after 1st January, 2003" (w.e.f. 27-12-2002). 178 Substituted by G.S.R. 111(E), dated 10-2-2004, for "invalid carriages and agricultural tractors" (w.e.f. 10-8-2004). 179 Inserted by G.S.R. 65(E), dated 25-1-2000 (w.e.f. 25-1-2000). 180 Sub-R (5) substituted by G.S.R. lll(E),dated 10-2-2004 (w.e.f. 10-8-2004). Earliersub- R. (5) was inserted by G.S.R. 845(E), dated 27-12-2002 (w.e.f. 27-12-2002). 175[(2) The steering gear of every motor vehicle shall be so constructed as to conform to IS: 12222-1987, as amended from time to time.] 176[(3) 177[On and after 1st May, 2003], the steering effort of all motor vehicles other than three-wheelers not fitted with steering wheel, motor cycles, 178 179 180[and invalid carriages] manufactured shall conform to the Indian Standard IS: 11948-1999, as amended from time to time.]] 179[(4) Every heavy passenger motor vehicle manufactured after expiry of six months from the date of commencement of the Central Motor Vehicles (Amendment) Rules, 2000 (including the date of such commencement), shall be fitted with power steering gears.] 180[(5) The power steering shall be fitted in,— (a) the Category N3 multi-axle vehicles on and from 1st May, 2004; and (b) other than multi-axle vehicles of Category N3 on and from 1st December, 2004.] 81 181[98-A. Steering gears for construction equipment vehicles.—(l)The steering system of every construction vehicle shall be maintained in good and sound condition, with backlash not exceeding 30 degrees on the steering wheel when tested with the engine running; ball-joints connecting the steering linkage of the mechanical steering system shall be protected by rubber caps and where the connections are secured with bolts or pins, the bolts or pins shall be effectively locked; in the case of hydrostatic steering system the moving parts shall be effectively sealed and protected from dust ingress. (2) The steering system of the construction equipment vehicle shall be adequately designed to ensure efficient and effective control of the vehicle under all the driving conditions and shall be so constructed as to conform to the Indian Standards IS: 12222­ (1987), as modified from time to time. (3) The steering effort of the construction equipment vehicles during normal unladen operation shall not exceed 11.7 kg push/pull for hydrostatic steering system and 20 kg for manual steering wheel system when evaluated as per clauses 5.1 to 5.4 of Indian Standards IS: 11948-(1986) as specified by the Bureau of Indian Standards.] 182[98-B. Steering Gears for agricultural tractors.—(1) The steering gear of agricultural tractor shall be maintained in good and sound condition, free from backlash exceeding 30 degrees on the steering wheels. All ball joints connecting the steering linkage shall be protected by rubber caps and where the connections are secured with bolts, or pins, the bolts or pins shall be effectively locked. (2) The turning circle diameter and turning circle clearance diameter of every agricultural tractor shall conform to IS: 11859-1986, as amended from time to time. (3) The steering effort requirement of agricultural tractor shall conform to Automotive Industry Standard (AIS): 042 as amended from time to time, till such time the corresponding BIS standard is notified.] 183[98-C. Steering gear for power tillers.—The turning circle diameter and the turning clearance circle diameter of power tillers coupled to trailers, when measured as per IS:12222:1987, as amended from time to time, shall not exceed 10 metres.]

Previous and next

All provisions of THE CENTRAL MOTOR VEHICLES RULES, 19891

Questions people ask

Is rule 98 of THE CENTRAL MOTOR VEHICLES RULES, 19891 still in force?

No repeal of the CENTRAL MOTOR VEHICLES RULES, 19891 is recorded.