Rule 31, THE CENTRAL MOTOR VEHICLES RULES, 19891: Syllabus for imparting instructions in driving of motor vehicles
THE CENTRAL MOTOR VEHICLES RULES, 19891 - Rule 31
Text of rule 31
Syllabus for imparting instructions in driving of motor vehicles
31. Syllabus for imparting instructions in driving of motor vehicles.—(1) The
syllabus for imparting instructions in driving of motor vehicles of the schools or
establishments shall be as follows (see tables below):—
A. DRIVING THEORY—I
1. Know your vehicle control: Simple introduction to automobile engines and their
working.
2. Foot controls Foot brake, accelerator, clutch-dipper (not in present
models).
Hand controls Steering wheel, hand brake, horn, light, wipers, ignition
switch, starter, dipper and indicators.
Other controls Rear-view mirror (right and left side),
instrument cluster, gauges, dials, windscreen—their
purpose.
3. Pre-driving checks (i) Before sitting on driver's seat and
(ii) After sitting on driver's seat.
4. Beginning to drive Precautions just before moving,
While moving
Bitting point,
Moving,
Steering control,
Changing of gear,
Stopping,
Braking,
Accelerator (gradual, sudden)
Traffic sense, road sense, judgment, parking and
positioning according to road users,
Reversing.
5. Driving on the road Anticipation, judgment and road positioning according to
other road users.
6. Driving at inter-sections Mirror Signal and Maneuver (MSM) and Position Speed
and Look (PSL).
Zone of vision:
7. Maneuvers Merging and diverging maneuvers—turning maneuvers to
left, right, about, 3-point turn, 5-poinl turn and U-turn,
overtaking stationary vehicle, moving vehicle in left side
and right side.
8. Reversing Locating reverse gear in sitting position, speed control,
steering in reverse gear, weaving the 'S' bend and
common errors.
9. Parking Parallel, angular, perpendicular, parking facing uphill,
parking facing downhill, common errors.
11. Priority for certain vehicles Emergency vehicles Fire engines, and Ambulance.
62 Inserted by G.S.R. 589(E),dated 16-9-2005 (w.e.f. 16-10-2005).
25
B. TRAFFIC EDUCATION—I
1. Driving regulations
2. Hand signals
3. Traffic signs
4. Hand signals of T raffic constables/T raffic
warden.
5. Introduction to automatic light signals.
6. Introduction to road markings.
7. Speed regulations on highways and city
roads.
8. Parking at objectionable places.
9. Some important provisions of the Motor
Vehicles Act, 1988—Sections 122, 123,
125, 126 and 128 of the Motor Vehicles
Act, 1988.
10. Test of competence to drive
C. LIGHT VEHICLES DRIVING PRACTICE
Road use regulations made under section
118 of the Motor Vehicles Act, 1988.
Schedule to the Motor Vehicles Act, 1988.
Sub-rule (3) of rule 15 of the Central Motor
Vehicles Rules, 1989.
1. Identification of various parts of the
vehicles.
2. Pre-driving checks (i) Before sitting on driver's seat, and
(ii) After sitting on driver's seal.
6. Steering practice —Push and pull method.
4. Bitting point
5. Moving and gear changing
6. Stopping: —Normal stopping —Emergency
stopping.
7. Developing judgment and anticipation to
drive on road.
8. Reversing —In straight
—in S bends.
9. Turning about and parking.
10. Licensing.
D. VEHICLE MECHANISM AND REPAIRS
1. Layout of vehicle.
2. Function of diesel and petrol engine.
3. Fuel system
4. Cooling system
—Fuel lines
—Fuel injection pump
—Automiser
—Airlock —Oil block.
—Purpose —Radiator
—Water pump
—Fan leaf/fan belt
—Radiator water boiling
—Rectification.
26
5. Lubrication system —Purpose
—Engine lubrication
—Chassis lubrication
—Oil grade numbers unilwise.
6. Transmission system (a) Clutch:
—Function
—Slip
—Rising
—Linkages
(b) Gearbox:
—Function
—Purpose
—Parts
(c) Propeller shaft:
—Function / purpose
—Yoke joint
—C.J. bearing slip
—"U" joint
—Lubrication
(d) Differential:
—Purpose
—Function/Noise.
7. Suspension system —Purpose
—Springs
—Shackle, shackle pinbushes
—Shock absorber and its bushes.
8. Steering system —Purpose
—Steering geometry
—Steering linkages
—Steering box
9. Brake system —Purpose
—Hydraulic brake andits know-how
—Air assisted hydraulic brake and its know-how
—Air brake and its know-how
10. Electrical system —Brake adjustment of the entire system.
—Battery and its condition
—Dynamo/Alternator
—Self motor—Starter motor regulators
—Lights—Knowledge to read the charging rate in the Ampere
meter.
11. Tyres —Study of tyres
—Maintenance
—Effect of defective tyres and wheel alignment.
12. Instruments cluster, dash
board meters and their
purposes and functions.
27
E. MEDIUM AND HEAVY VEHICLE DRIVING:
DRIVING THEORY—II
1. Qualities of a good driver —Patience, responsibility, self-confidence, anticipation,
concentration, courtesy, defensive driving, knowledge of
road rules/regulations, knowledge of vehicle controls,
maintenance and simple mechanism.
2. Knowledge of vehicle controls —Major controls
—Minor controls.
3. Response to controls —Accelerator
—Brake—Gradual /Sudden /Sudden tierce
—Clutch
—Steering.
4. Pre-driving checks (i) Before sitting on driver's seat, and (//) after sitting on
driver's seat.
5. Holding steering wheel —Push and pull method practice —on the move
—while gear changing
—while turning
—while sounding horn
—while operating dash board switches
—while signalling
—on emergency.
6. Gear changing —Double de-clutching, importance and procedure single
clutching
—Gear up procedure, shifting to lower gears
—Gear down procedure, shifting to higher gears.
7. Beginning to drive —I gear
—II gear
—Ill gear
—IV gear
—V gear
—Reverse gear
—Over drive/optional.
8. M.S.M. and P.S.L. Routines.
9. Manoeuvres —Passing
—Merging
—Diverging
—Overtaking
—Crossing
—Turning
—Cornering
—Reversing
—Parking.
10. Slopping —Normal stopping
—Emergency stopping
—Use of engine brake/ exhaust brake.
11. Stopping distance —Reaction distance
—Braking distance.
12. Following distance —Meaning
—Distance method
—Car length method
—2seconds time rule method.
13. Identification, prediction,
decision and execution (IPDE)
principle.
14. Defensive driving techniques Judgment Anticipation Escape route.
28
15.
16.
17.
18.
19.
20.
21.
1.
2.
3.
4.
5.
Fuel saving methods
Reports—discussions
Night driving Location of head light switch
Procedure
Obligation to light the lamps, restriction on lighting
the lamps.
Hill driving Starling in hill using the parking brake method
Slipping the clutch method Driving uphill Driving
downhill.
Emergency manoeuvres Prevention is better than cure in case of skidding,
horn
stuck
Fire, wheels coming out
Brake failure
Broken stub axle Burst of front tyre Steering
wobbling
Snapping of steering linkages Jamming of
accelerator pedal
Snapping of clutch rod
Under special circumstances like chances of
collision with a disabled vehicle.
Brake failure during downhill
Sudden obstruction in front of the vehicle
Driving under special
conditions In wet weather
Towing (trailer driving)
In dawn, dusk and misty roads In dense traffic.
Procedure On tow board
Speed of towing
Reversing and positioning the vehicle with trailers.
F. TRAFFIC EDUCATION—II
Know your road Functional classification
Design speeds
Road geometries
Surface types and characteristics
Slopes and elevation.
Slight distance At bends
At intersections.
Road junctions Principles and types
I junctions
Y junctions
4-Arm junctions
Staggered junctions
Controlled junctions
Uncontrolled junctions.
Traffic islands
Bye-pass, subway,
over-bridge and flyovers
Types of round about Channelisers, median.
Purpose
Driving procedures.
29
G. PUBLIC RELATIONS FOR DRIVERS
Some basic aspects about ethical and courteous behaviour with other road users
H. HEAVY VEHICLE DRIVING PRACTICE
1.
2.
Introduction of various instruments
Pre-driving checks
3. Beginning to drive
Dial gauges and controls.
(i) Before sitting on driver's seat, and (ii)
After sitting on driver's seat.
Bitting point, moving, changing
gear including
steering, stopping, hand signals.
Application of IBDE—principle.
double de-clutch
4. Rural road driving
5. Development of judgment:
6. Development of anticipation:
Passing, overtaking, merging,
diverging, M.S.M. and P.S.L. routine
method of practice, defensive driving
technique, proper following.
Turning, meeting, entering and emerging
in junctions, lane selection and lane
discipline, intersection, observa Hon.
7.
8.
9.
10.
11.
12.
Developing skill to drive in crowded streets.
Nigh l driving.
Cross country practice and hill driving.
Internal-trade test.
Reversing and parking practice.
Licensing.
I. FIRE HAZARDS
Fire-fighting and prevention methods on vehicle.
J. VEHICLE MAINTENANCE
1. Factors affecting the vehicle parts due to
bad and negligent driving.
2. General day-to-day maintenance and
periodical maintenance.
3. Battery maintenance.
4. Tyre maintenance and tube vulcanizing.
5. Engine tune up.
6. Checking wheel alignment.
7. Brake adjustment.
8. Accelerator, brake, clutch-pedal
adjustment.
9. Fan belt adjustments.
10. Observation of dash-board meters.
11. Lubrication.
12. Removal of air lock and oil block.
K. FIRST-AID
1. Introduction to first-aid.
2. Outline of first-aid.
3. Structure and functions of the body.
4. Dressings and bandages.
5. The circulation of the blood.
6. Wounds and haemorrhage.
7. Haemorrhage from special regions.
8. Shock.
30
9. Respiration.
10. Injuries to bones.
11. Burning scales.
12. Unconsciousness (insensibility).
13. Poisons.
[(2) The lessons for training drivers of non-transport vehicles shall cover Parts A, B, C, F,
G and K of the syllabus referred to in sub-rule (1) and the training period shall not be
less than twenty-one days:
Provided that in case of motor cycles, it shall be sufficient compliance with the
provisions, if portion of Part C of syllabus as applicable to such vehicles are covered.
(3) The lessons for training drivers of transport vehicles shall cover Parts E, F, G, H, I, J
and K of the syllabus referred to in sub-rule (1) and the training period shall not be less
than thirty days:
Provided that this sub-rule shall not apply in respect of drivers holding driving licence to
drive medium goods vehicle or medium passenger motor vehicle who had undergone
the lessons after the commencement of tins rule, and desiring to obtain a driving licence
to drive heavy goods vehicle or heavy passenger motor vehicle.
(4) The actual driving hours for trainees in driving non-transport vehicles shall not be
less than ten hours and actual driving hours for trainees in driving transport vehicles
shall not be less than fifteen hours:
Provided that in the case of drivers holding driving licence to drive medium goods
vehicle or medium passenger motor vehicles undergoing training for heavy motor
vehicles, it shall be sufficient if they undergo training in driving for a period of not less
than five hours.
63[(5) Nothing in this rule shall apply in the case of an applicant whose driving licence
authorises him to drive a motor cycle or a three-wheeler non-transport vehicle or a motor
car, applying for a licence to drive a motor cab of the respective type, or in the case of
an applicant holding a driving licence to drive a tractor, applying for a licence to drive a
tractor-trailer combination.]
(6) Where any trainee possesses first-aid certificate issued by St. John Ambulance
Association, he need not undergo Part K of the syllabus referred to in sub-rule (1).]
64[31-A. Temporary licence.—(1) Where there is no school or establishment as is
referred to in sub-section (4) of section 12 or granted a licence under sub-rule (4) of rule
24, in any Taluk within the jurisdiction of the licensing authority, the licensing authority
63 Substituted by G.S.R. 338(E), dated 26-3-1993 (w.e.f. 26-3-1993).
64 Inserted by G.S.R. 933(E), dated 28-10-1989 (w.e.f. 28-10-1989).
31
may, notwithstanding any tiling contained in sub-rules (3) and (4) of rule 24 or rule 25,
grant a temporary licence to any establishment or any person for imparting instructions
in the driving of a transport vehicle, subject to the following conditions, namely:—
(a) the temporary licence shall be valid for a period of one year from the date of its issue:
Provided that as long as the Taluk does not have any school or establishment, the
licensing authority may renew a temporary licence granted under this sub-rule for a
further period not exceeding one year at a time;
(b) the person imparting instructions in the driving of a transport vehicle shall possess
the following qualifications, namely:—
(i) a minimum driving experience of five years in the class of vehicles in which
instructions are proposed to be imparted;
(ii) adequate knowledge of the regional language of the region in which the
school or establishment is situated;
(iii) thorough knowledge of traffic signs specified in the Schedule to the Act and
the Regulations made under section 118;
(iv) ability to demonstrate and explain the functions of different components and
parts of a vehicle;
(c) the applicant shall maintain a motor vehicle each of the type in which the instruction
is imparted and also the following apparatus, namely:—
(i) a blackboard;
(ii) traffic sign chart;
(iii) a service chart depicting a detailed view of all the components of a motor
vehicle;
(iv) puncture kit with tyre lever, wheel brace, jack;
(v) spanners (a set each of fixed spanners, box spanners, screw driver, screw
spanners and hammer).
(2) The driving schools run by a State Transport Undertaking or an Industrial Training
Institute set up by the Central Government or any State Government and other
establishments run by the Central Government or a State Government which have
facilities for imparting training for drivers, shall be authorised to issue driving certificates
in Form 5, subject to the condition that the training imparted in these schools shall be in
accordance with the syllabus referred to in rule 31.]
Previous and next
Questions people ask
Is rule 31 of THE CENTRAL MOTOR VEHICLES RULES, 19891 still in force?
No repeal of the CENTRAL MOTOR VEHICLES RULES, 19891 is recorded.