Section 7, SAW MILLS RULES
SAW MILLS RULES (76 of 2019) - Section 7
Text of section 7
7. Grant, renewal and revocation of a license or Registration certificate
and 35 A
to a Wood Based Industry.-(1)No license to a Wood Based Industry
shall be granted or renewed without obtaining prior approval of State
Level Committee. However, State Level Committee may delegate the
power of renewal of license to a Wood Based Industry to the Divisional
Forest Officer of the concerned Division in which the Wood Based
Industry is located.
(2) All Wood Based Industries are required to be licensed or registered
under these rules.
(3) No person shall establish, expand the installed capacity, shift location
or operate Wood Based Industries, including the existing unit, unless
a license or registration certificate is previously obtained by him in
accordance with these rules.
(4) Following Industries or Processing units shall not require license
under these rules, namely :-
(i) Industries or processing units not operating with a band saw
or process already sawn wood;
(ii) Industries or processing units operating with a circular saw
PUNJAB GOVT. GAZ., DECEMBER 13, 2019 675
(AGHN 22, 1941 SAKA)
upto thirty centimeter diameter;
(iii) Industries having specialized requirement (as decided by the
State Level Committee) and using circular-saw upto sixty
centimeter diameter;
(iv) Industries or Processing units not using round logs of domestic
origin i.e. using imported wood or timber from outside the
country irrespective of size and type of saw. However, such
Industries or processing units shallbe required to provide the
requisite documentation regarding this as may be specified by
the State Level Committee; and
(v) Industries or processing units using round logs of the species
notified as agriculture or agroforestry produce and/or exempted
from the regime of felling and transit regulations,irrespective
of size and type of saw.
(5) All Industries or processing units mentioned in sub-rule (4) which have
been exempted from licensing shall, however, be required to get themselves
registered with the Department of Forests and Wildlife Preservation under
rule 10 of these rules and shall also have to establish the source of raw
material for their industry. Irrespective of the exemptions listed in sub-
rule (4), all existing units shall also be required to register themselves with
the Department of Forests and Wildlife Preservation within a period of
six months from the date of coming into force of these rules. If any unit
fails to get itself registered, such unit shall be deemed to be violating
these rules and shall, hence, be liable for action.
(6) Transfer of licence or registration certificate on sale/succession etc. shall
be done only with the prior approval of State Level Committee.
(7) The Wood Based Industry shall have to be set up within six months from
the date of grant of license or registration certificate, as the case may be,
failing which the license or registration certificate, as the case may be,
may be extended; or revoked by the Divisional Forest Officer after three
months' notice under intimation to the State Level Committee :
Provided that in case it is extended, not more than three months'
extension shall be granted by the Divisional Forests Officer.
676 PUNJAB GOVT. GAZ., DECEMBER 13, 2019
(AGHN 22, 1941 SAKA)
(8) All Wood Based Industries shall follow all environmental and
other regulations laid down by the Punjab Pollution Control
Board, Central Pollution Control Board and Ministry of
Environment, Forest and Climate Change, as applicable to these
industries under the Environment (Protection) Act, 1986
(Central Act No. 29 of 1986) and other Central and State Acts.
Sections 32,
Previous and next
Questions people ask
Is section 7 of SAW MILLS RULES still in force?
No repeal of SAW MILLS RULES is recorded.