Rule 53, THE ARMS RULES, 2016 1: Applications for a licence in Form VII
THE ARMS RULES, 2016 1 - Rule 53
Text of rule 53
Applications for a licence in Form VII
53. Applications for a licence in Form VII.– (1) Every manufacturer applying for
a fresh licence under these rules shall be an Indian company incorporated under
the Companies Act, 2013 (18 of 2013):
1. Omitted by G.S.R. 1342 (E) dated 27.10.2017
2. Substituted by G.S.R. 1342 (E) dated 27.10.2017
41
Provided that the applicant company is owned and controlled by resident
Indian citizens or by Indian companies, owned and controlled by resident
Indian citizens except in respect of a company having Foreign Direct
Investment (FDI) beyond forty-nine percent:
Provided further that the Chief Executive of the company is a resident Indian
and the management of the applicant company is in Indian hands with majority
representation on the Board excluding nominee or independent directors except
in respect of a company having Foreign Direct Investment (FDI) beyond forty-
nine percent.
(2) The company applying for a licence in Form VII under these rules shall
provide –
(a) original or certified copies of the company’s founding documents
including Memorandum and Articles of Association, Certificate of
Registration of the company under the Companies Act, 2013 (18 of 2013),
CIN (Corporate Identification Number), proof of address of its registered
office, Permanent Account Number (PAN) card and certified lists of
directors and shareholders as on the date of application;
(b) copy of Director Identification Number (DIN) of all the
directors;
(c) identification proof along with two recent photographs of all the directors
and the responsible person as under:-
(i) Aadhar Card; or
(ii) in case the director or the responsible person does not have Aadhar
Card, a written declaration in the form of an Affidavit to be submitted
in this regard along with an alternative identification proof which may
include Passport or Voter’s Identification Card or Permanent Account
Number (PAN) card or official Identity Card;
(d) residence proof –
in case the director or responsible person does not have Aadhar Card or
Passport, alternative residence proof to be submitted which may include
Voter’s Identification Card or Electricity Bill or Landline Telephone Bill
or Rent Deed or Lease Deed or Property documents or any other document
to the satisfaction of the licensing authority;
(e) copy of the latest balance sheet of the company and audited copy of the
Net-worth certificate duly certified by a Chartered Accountant;
(f) estimated project outlay and means of finance for funding the project duly
certified by a Chartered Accountant;
(g) certified copy of the board resolution for making an application under
these rules along with full particulars of the responsible person authorised
to sign the same;
42
(h) details of foreign control and/or ownership in the applicant company, as
applicable, duly certified by a Chartered Accountant;
(i) complete details of the arms and/or ammunition intended to be
manufactured or proof-tested or both, including their types and quantities;
(j) a declaration with proof thereof to the effect that it has acquired the land
for setting up the manufacturing plant or for setting up proof-test facility
along with details of an access road to the proposed site, installation of
electricity and water connection, particulars of land development carried
out and any other information deemed necessary by the licensing
authority.
54. Procedure for grant of licence in Form VII.─ (1) The licence for
manufacture or proof-test or both shall be granted by the licensing authority to
an applicant who fulfills the eligibility criteria laid down in these rules
provided that no adverse remarks are received from various government
agencies entrusted for verifying the antecedents of the applicant company or its
directors or responsible person, as the case may be.
1[(2) A licence granted in Form VII shall be valid for the life time of the
licensee company:
Provided that the licensee shall be required to setup the facility
for manufacture or proof test of arms and/or ammunition, recruit technical and
administrative staff, develop and proof test proto-types of arms and
ammunition, conduct trial runs and any other activity related to the setting up
of the facility for the manufacture or proof-test of arms and ammunition, within
a period of seven years from the date of grant of a licence:
Provided further that the licensing authority may extend the
period of seven years by a further period of three years, on the basis of a
written representation received from the licensee and after recording reasons
for granting such an extension:
Provided also that if during the period of seven years or the
extended period of three years, as the case may be, the licensee fails to setup
the manufacturing or proof-test facility or is unable to take other operating
steps required for starting commercial production, the licence shall be
suspended or revoked.]
(3)(a) No manufacturing facility shall be set-up in the border areas, restricted
areas or prohibited areas and any area declared as ‘disturbed area’ by the
Central Government.
(b) The manufacturer applicant may setup the facilities in Special Economic
Zones (SEZ), Industrial Parks and other industrial areas in addition to any other
location duly approved by the State Government concerned for this purpose.
1. Substituted by G.S.R. 1342 (E) dated 27.10.2017
43
(4) The licensee shall make an application on its letter head for commencement
of commercial production accompanied by –
(i) a declaration to the effect that the licensee has installed the plant and
machinery, successfully carried out the trial run and is ready for
commencement of commercial production of the items licensed for
manufacture or proof-test;
(ii) a declaration to the effect that the licensee has installed
and applied the requisite quality control system for
manufacture or proof test of firearms or ammunition;
(iii) a list of particulars of the key technical personnel employed by the licensee
for carrying out manufacture or proof-test facility along with the proof of
their professional expertise and training undergone and identification
documents as specified for directors in rule 53;
(iv) a declaration to the effect that the licensee has fully complied with the
security guidelines as contained in the Security Manual prepared by the
Ministry of Defence, Department of Defence Production, for licensed
defence industries.
(5) The licensing authority shall get conducted a security and appraisal audit to
ensure that the applicant licensee has complied with the declaration specified in
clause (iv) of sub-rule (4).
55. Other requirements as to licences granted in Form VII.─ (1) The licensee
shall preferably be self-sufficient in areas of product design and development
and have maintenance and life cycle support facility of the product to be
manufactured and the items to be manufactured shall meet the International or
Indian accredited quality standards and norms with special emphasis on
indigenous designing:
Provided that no infringement of patents or copyrights, shall be permissible.
(2) The licensee shall submit the standards and testing procedures for
manufacture of firearms and ammunition to the Government nominated
Quality Assurance Agency, which will inspect the finished product in the trial
run and conduct audit of the Quality Assurance Procedures in respect of
design, workmanship, aesthetics and other related parameters:
Provided that the quality specifications for manufacturing, shall be as
specified by the Bureau of Indian Standards (BIS) and the Director General of
Quality Assurance, Department of Defence Production or any other
international quality assurance agency.
(3) The manufactured products shall contain the warranty clause accompanied
by service and safety manuals and listing of parts at the time of every sale.
44
(4) Any restrictions under a joint venture agreement which may be imposed by
the foreign partner shall have no legal consequence on the Indian entity that is
granted a licence under these rules.
(5) The licensing authority may impose such additional restrictions in case of
certain sensitive type of arms and ammunition, such as those configured for use
by armed forces or not permitted to be possessed by civilians.
1[(6) The small arms and light weapons produced by the manufacturers may be
allowed for export subject to the approval of the Ministry of Home Affairs in
consultation with the Ministry of External Affairs, the Ministry of Defence and
the Ministry of Commerce, on a case to case basis.]
(7) The permissible category of arms and ammunition specified in Schedule I
may be permitted for sale to persons or dealers, holding a valid arms licence
under these rules, with the prior approval of the Central Government in the
Ministry of Home Affairs.
(8) Prior approval of the licensing authority shall be mandatory for any change
in the directorship of the company or any change in the key managerial
personnel as defined in clause (51) of section 2 of the Companies Act, 2013
(18 of 2013) or any change in the responsible person of the company.
(9) Prior approval of the licensing authority shall be mandatory for any change
in control or ownership, either directly or indirectly, of the company or any
change in shareholding resulting into dilution of promoters share-holding (both
Indian and foreign) or any change in shareholding of the company or any
change in the beneficial interest in the shareholding of the company beyond
five percent (5%).
(10) (a) A licence granted in Form VII shall not be transferable from the
licensee to another company, without the written authorisation of the licensing
authority.
(b) An application for transfer shall be accompanied by complete documents
and be subject to the same conditions as applicable at the time of initial grant
of licence specified in rule 53.
(c) While considering an application for transfer of a manufacturing licence,
the licensing authority shall assess the eligibility of the company, to whom the
licence is to be transferred.
2[(11) A licensee company having a licence in Form VII shall be permitted to
have enhanced annual production of firearms and/or ammunition upto fifteen
percent of the quantity endorsed on his licence by giving a prior intimation to
the licensing authority for which no further endorsement on the licence as to
capacity shall be required.]
_______________________________________________________________
1. Substituted by G.S.R. 1342 (E) dated 27.10.2017
2. Inserted by G.S.R. 1342 (E) dated 27.10.2017
45
56. Obligations of licensees having licensee Form VII. ─ (1) The validity of a
licence granted in Form VII shall be subject to the manufacturer’s compliance
with the conditions contained in these rules and in the licence.
(2) The licensee having a licence in Form VII shall mark all firearms and
ammunition that it manufactures in the manner as specified in rule 58.
(3) The licensee company shall comply with the Foreign Direct Investment
(FDI) policy of the Government of India and the regulations framed under the
Foreign Exchange Management Act, 1999 (42 of 1999) as notified by the
Reserve Bank of India in case of foreign direct investment in the said company.
(4) The licensee shall comply with the security guidelines as contained in the
Security Manual prepared by the Ministry of Defence, department of defence
production, for licensed defence industries.
(5) The licensee shall maintain records of all firearms, their parts, components
and/or ammunition manufactured by it as specified in rule 65 in addition to the
conditions specified or forming part of the licence in Form VII.
(6) The licensee shall store all firearms, their parts, components and/or
ammunition manufactured by it as specified in Form VII.
(7) The licensee shall permit, and shall cooperate fully with, inspections carried
out by the licensing authority (or such other body as may be designated by it)
of the licensee’s facilities, particularly in respect to the safe and secure storage
of firearms and ammunition.
(8) The licensee shall immediately notify the licensing authority on occurrence
of any theft, loss or unintentional destruction of firearms or ammunition stored
at its premises.
(9) The licensee shall notify the licensing authority within three working days
on occurrence of any of the following events, namely:-
(i) change of address of its registered office;
(ii) change in the directors, in which case the licensee shall provide the
licensing authority with the names and addresses of each new director,
along with the particulars and documents specified in rule 53 for directors.
(10) The licensee shall ensure that all employees who have access to completed
manufactured firearms or ammunition within the manufacturing or proof-
testing facility are technically competent to handle the same.
(11) The work-in-progress and finished goods inventory for each type of
firearm and ammunition at any given time shall not exceed two times of the
total annual turnover in the last financial year or annual licensed capacity,
whichever is lower:
Provided that in case of a company having multi-unit facility, total of
the annual licensed capacity or total turnover of the company shall be
considered.
46
(12) The licensee shall maintain complete database of inventory and
distribution chain down to the dealer/end user for domestic distribution and end
users in case of export.
(13) The licensee shall carry out only batch production in a manufacturing
cycle.
57. Import of machinery for manufacturing arms and ammunition and other
parts etc.─ (1) The licensee having a licence in Form VII shall submit an
application along with the complete list of machinery to be installed, to be
procured locally or imported.
(2) The licence for acquisition, possession, import or transport of machinery
shall be issued in Form I.
(3) Import of arms specified in category II of Schedule I and raw material in
the form of metal, alloy, fiber, polymers, wood and other allied items, for
manufacturing of such arms, shall be allowed subject to the provisions of the
Foreign Trade Policy notified under the Foreign Trade (Development and
Regulation) Act 1992 (22 of 1992) from time to time by the Directorate
General of Foreign Trade (DGFT) and on the recommendations of the Ministry
of External Affairs (MEA) taking into account international obligations and
commitments.
(4) The Ministry of Home Affairs may, on an application containing full
technical details allow import of such parts of arms and ammunition which are
not possible to be manufactured locally, after obtaining the opinion of the
Department of Defence Production by grant of an authorisation for such import
in accordance with the procedure for import under these rules.
58. Marking of firearms and ammunition at the time of manufacture.─ (1) All
firearms shall have applied to them, at the time of their manufacture, unique
markings containing the following information, namely:-
(i) the country of manufacture;
(ii) the name of the manufacturer;
(iii) a serial number unique to the manufacturer;
(iv) year of manufacture;
(this information may be incorporated into the serial number)
(v) firearm type/model;
(vi) caliber;
(vii) proof-marks; and
(viii) such other additional information if the firearm is intended for an
Indian domestic State entity viz. military, Central Armed Police Forces,
Police etc.
47
(2) Markings shall be expressed alphanumerically (i.e. they may consist of both
letters and numbers) in the format given in the table below:–
Table
(1) (2) (3) (4) (5) (6)
XX XXXX 99 99 99999 99
Country of
Manufacture
(2 digit ISO
Country Code)
IN for India
Manufacturer’s
Name or code
Year of
manufacture
(2 numbers)
Type/
Model/
Code
Serial
Number
Caliber
(3) Markings shall be applied to a component of the firearm that is essential to
its operation, such as ─
(i) the frame/receiver;
(ii) barrel;
(iii) slide, cylinder, bolt or breech block; and
(iv) any other part or component essential to the operation of the firearm.
(4) Markings shall be applied to an exposed surface of the firearm by using
the stamping method at the time of their manufacture and stamped marking
shall have a depth of at least 0.20 mm.
(5) The applied marking shall be ─
(i) conspicuous without technical aids or tools;
(ii) easily recognisable;
(iii) readable;
(iv) durable; and
(v) recoverable (as far as is technically possible).
(6) The smallest packaging units of ammunition for firearms shall be marked
containing the following information, namely:-
(i) country of manufacture;
(ii) name of the manufacturer;
(iii) lot or batch number unique to the manufacturer;
(iv) year of manufacture;
(this information may be incorporated into the lot or batch number),
(v) caliber; and
(vi) type.
(7) Individual cartridges may also be marked, which may include the following
information, namely: –
48
(i) country of manufacture;
(ii) name of the manufacturer;
(iii) lot or batch number unique to the manufacturer;
(iv) caliber; and
(v) type.
59. Proof test of firearms.─ (1) A new manufacturer may set up a proof test
facility for gun barrels or completed firearms.
(2) The facility shall be located within its premises separately from its arms
manufacturing unit.
(3) A manufacturer who intends to set-up a proof testing facility shall make an
application in Form A-6 along with the application for arms and ammunition
manufacturing licence.
(4) The application under sub-rule (3) for proof-testing facility shall be
examined by the Ministry of Home Affairs in consultation with the Directorate
General of Quality Assurance (DGQA), Ministry of Defence and in accordance
with the guidelines specified for manufacturing licence.
(5) The existing manufacturers shall get their barrels or completed firearms
proof tested either from the ordnance factories or other proof houses having
proof test facilities under these rules.
(6) Every licensee having proof-testing facility shall be responsible for the
security and disposal of waste such as rejected barrels or completed firearms.
(7) 1[Every licensee holding a licence in Form VII] shall maintain a proof test
register in the format of a secure electronic database in addition to the records
specified in rule 65 for sale or disposal of completed arms and ammunition.
(8) The record to be maintained by the licensee under sub-rule (7) shall include
the following particulars, namely:-
(i) Serial numbers of gun-barrels or completed firearms manufactured;
(ii) Date, month and year of manufacture;
(iii) Date of despatch of gun-barrels or completed firearms to proof house;
(iv) Number and date of licence (Transport Licence in Form XIII) under
which gun-barrels or completed firearms sent for proof test;
(v) Date of receipt of gun-barrel or completed firearms after proof test;
(vi) Result of proof test;
(vii) Date of completion of gun if only the gun-barrel has been proved;
(viii) Date on which completed firearm transferred to register for sale or
transfer maintained under rule 65;
_______________________________________________________________
1. Substituted by G.S.R. 1342 (E) dated 27.10.2017
49
(ix) Serial number in rectification register in case gun-barrel or completed
firearm was not accepted in proof on initial submission;
(x) Remarks of inspecting officer;
(9) 1[Every licensee having a licence in Form VII] shall maintain a rectification
register containing details of the barrels or completed firearms not passed by
proof house, which shall include the following particulars, namely:-
(i) Serial number;
(ii) Serial number stamped on gun-barrel or completed firearm to be
rectified;
(iii) Number and date of proof house communication indicating
rectifications to be made;
(iv) Date on which gun-barrel or completed firearm re-submitted for proof
test after rectification;
(v) Date of receipt of gun-barrel or completed firearm after proof test and
the result of proof test;
(vi) Date of completion of firearm if gun-barrel or completed firearm has
been proved;
(vii) Date on which completed firearm transferred to Register for sale and
transfer maintained under rule 65;
(viii) Remarks
(10) The proof-test and the rectification records shall be inspected by the
district magistrate of the area, or by an officer nominated by him in this behalf,
during July and January every year and during one surprise inspection in a
calendar year to verify the following, namely:-
(i) serial numbers on gun-barrels or completed firearms are stamped in the
strict order in which they are manufactured;
(ii) entries of sale or transfer are made promptly and tally with record of such
transactions under rule 65;
(iii) the conditions of the licence are strictly complied with.
(11) A Transport licence in Form XIII may be issued by the licensing authority
on an application for transport of gun-barrels or completed firearms to proof
house provided the licence in Form VII is valid on the date of issuance of such
Transport licence.
_______________________________________________________________
1. Substituted by G.S.R. 1342 (E) dated 27.10.2017
50
(12) Transport licence issued under sub-rule (11) for transport of gun-barrels or
completed firearms to proof houses shall indicate separately total quantity of
gun-barrels or completed firearms to be despatched for proof test for the first
time and for rectification of defects.
(13) The licensee shall be eligible to submit gun-barrels or completed firearms
for proof test after rectification of defects without any limit on the number of
occasions for such submission:
Provided that the licensee shall complete the necessary rectifications
within a period of two years from the date of communication of first test results
of the defects issued by the concerned proof house.
(14) The gun-barrels or completed firearms for proof test which are unfit or
beyond rectification, shall be mutilated by the proof house and the decision of
the officer-in-charge of proof house concerned in this regard shall be final:
Provided that the mutilated parts that are capable of being utilised, shall
be returned by the proof house to the licensee.
(15) The sale or transfer of proof tested gun-barrels alone shall be prohibited
and the gun-barrels after proof test shall be assembled as a complete gun only
by the licensee authorised to manufacture it.
(16) The gun-barrels or completed firearms manufactured during a calendar
year shall be proof-tested within a period of eighteen months from the date of
the manufacture, failing which, it shall be considered to have been
manufactured during the calendar year of the proof-test.
60. Capacity revision and applicability of new norms to existing
manufacturers.─ (1) The existing manufacturers may apply for grant of a
fresh licence in Form VII in accordance with the procedure specified in rule 51.
(2) The existing manufacturer may apply for enhancement or restoration or
revision or re-fixation of its licensed capacity by an application made in this
regard with the Government of India in the Ministry of Home Affairs with the
recommendation of the State Government concerned, along with the following
documents, namely:-
(i) a copy of the existing manufacturing licence;
(ii) certified copies of the annual accounts of the licensee for the last five
years duly certified by a Chartered Accountant;
(iii) details of the plant and machinery and manufacturing facility;
(iv) certified copies of the stock records, manufactured items and sales
turnover for the last five years duly certified by a Chartered
Accountant;
51
(v) detailed proposal for enhancement of manufacturing capacity, project
outlays, means of finance and justification for economic viability and
market demand projections for enhancement in capacity production
duly certified by a Chartered Accountant;
(vi) track record and preparedness to comply with the security guidelines
for manufacturers in Micro, Small and Medium Enterprise (MSME)
sector;
(vii) declaration to comply with the provisions contained in these rules.
(3) Every application under sub-rule (2), shall be examined by the licensing
committee referred to in sub-rule (6) of rule 51, which may allow the capacity
revision provided the existing licensed capacity is fully utilised by the
manufacturer.
1[(4) Every existing manufacturer shall be issued a fresh licence in Form VII,
within a period of two years of the notification of these rules, by the licensing
authority and any permission or any exemption granted for procurement of raw
materials to the existing manufacturers under the Arms Rules, 1962 or under
the Industrial Development (Regulation) Act, 1951 or rules framed thereunder,
shall be deemed to have been issued under the corresponding provisions of
these rules.
(5) Every fresh licence issued in Form VII under sub-rule (4), shall be valid for
the life time of the licensee and such licensee shall be permitted to have
enhanced annual production of firearms and/or ammunition upto fifteen per
cent of the quantity endorsed on his licence by giving prior intimation to the
licensing authority and for which no further endorsement on the licence as to
capacity, shall be required.]
61. Licence in case of an individual or a sole proprietor.─ (1) In case the
existing manufacturer having a licence in Form IX under the Arms Rules, 1962
is an individual or a sole-proprietorship concern, the licence shall expire ipso-
facto on the death of the licensee.
(2) The legal heirs of the licensee under this rule may prefer an application for
grant of a fresh licence in Form VII to the Central Government in the Ministry
of Home Affairs, which may consider such application on case to case basis.
62. Admission of partners in case of existing manufacturer.─ (1) In case the
existing manufacturer having a licence in Form IX under the Arms Rules, 1962
is a partnership firm, additional partners may be admitted in case of death of a
partner wherein legal heirs of the deceased partner may be admitted as a
partner or partners in the firm subject to prior approval of the Central
Government in the Ministry of Home Affairs.
_______________________________________________________________
1. Substituted by G.S.R. 1342 (E) dated 27.10.2017
52
(2) An existing partner, during his life time, may induct his legal heirs as an
additional partner under this rule, on obtaining written consent of all other
existing partners, if any, in the partnership firm subject to prior approval of the
Central Government in the Ministry of Home Affairs.
63. Conversion of partnership firm into a private limited company.─ (1) Any
existing manufacturer, being a partnership firm, may make an application to
the Central Government in the Ministry of Home Affairs with the
recommendations of the State Government concerned for grant of permission
to convert the firm into a private limited company and the Central Government
may grant such permission provided that the Memorandum and Articles of
Association of the newly incorporated Company contain that─
(a) only the existing partners or family members are on the Board of Directors
of the company;
(b) restriction on the directors to transfer shares, assets or profits of the
company to any outside person and on submission of an undertaking to the
effect that the applicant company has complied with the relevant provisions of
the Companies Act, 2013 (18 of 2013) in this regard.
(2) No sale or transfer of the factory premises, inventory, machinery or other
assets of the private limited company, referred to in sub-rule (1) shall be
permissible without the prior approval of the Central Government.
64. Restoration of licence of a discontinued business of an existing
manufacturer.─ In case of a discontinued business, the legal heir of the
deceased licensee, if he is a major, may make an application for the grant of a
fresh licence in Form VII to the Central Government in the Ministry of Home
Affairs within twelve months of the death of the licensee and in case the legal
heir is a minor, within twelve months from the date of his attaining majority.
65. Record of transactions to be maintained by licensees holding licence in
Form VII.─ (1) The manufacturer shall keep a register in the format of a
secure electronic database known as the ‘Firearms Stock Register’, wherein the
following particulars shall be recorded: –
(a) on the debit side, against a stock number, the date of manufacture, make,
caliber, model and manufacturer’s serial number; and
(b) on the credit side, against the stock number referred to in sub-rule (a), –
(i) the date of sale of firearm;
(ii) the name and address and licence number of the dealer to whom the
firearm is sold;
(iii) the particulars of the Government department to whom the firearm is
sold;
53
(iv) the particulars and address of the person to whom the firearm was
exported together with the particulars of the export licence issued
under these rules by the licensing authority.
(2) The manufacturer shall keep a register in the format of a secure electronic
database known as ‘the Ammunition Stock Register’, wherein the following
particulars shall be recorded:–
(a) on the debit side,–
(i) the caliber, make and quantity of all ammunition manufactured,
purchased or acquired;
(ii) the lot number and the date of manufacture or receipt; and
(iii) in the case of the ammunition being purchased or acquired –
(A) the person from whom it was purchased or acquired; and
(B) the reason for the purchase or acquisition.
(b) on the credit side, –
(i) the lot number and the date of sale or use by the manufacturer of the
ammunition;
(ii) the caliber, make and quantity of ammunition sold or used by the
manufacturer;
(iii) the name, address and licence number of the dealer to whom the
ammunition is sold; or
(iv) the particulars of the Government department to whom the ammunition
is sold; or
(v) the name and address of the person to whom the ammunition was
exported together with the particulars of the export licence issued under
these rules by the licensing authority;
(vi) the date of collection and the signature of the dealer or relevant
Government official to whom the ammunition was delivered.
(3) (a) The manufacturer shall keep updated stock sheets of all manufactured
firearms and main firearm components.
(b) The registers referred to in sub-rules (1) and (2) shall be kept at the
business premises specified in the licence.
(c) All particulars of firearms and ammunition shall be recorded immediately
by the licensee on manufacture, receipt, transfer or use, as the case may be.
(4) (a) The manufacturer shall establish an online electronic connectivity under
his user id with the NDAL system and shall provide for a weekly electronic
online transfer of data regarding firearms manufactured and sold or transferred
and ammunition manufactured and sold or transferred or consumed for the
week, as recorded in the registers referred to in sub-rules (1) and (2) .
54
(b) If any circumstances occur which prevent a licensee to submit online
returns on NDAL system by means of electronic network connectivity, the
local licensing authority shall be informed immediately in order to establish
alternative means to submit the weekly returns.
(c) Weekly returns for the current week shall be submitted by the close of
business hours on every Saturday.
66. Enforcement powers as to inspection and confiscation.─ (1) (a) The
licensing authority shall from time to time, conduct inspections of
manufacturing facilities and records, in order to ensure compliance with the
conditions of the licence under the Act.
(b) The inspection may include verification of inventory records, mechanism of
marking of firearms, review of security norms, personnel records and any other
areas of relevance deemed appropriate by the inspecting team or as per the
instructions contained in the audit and inspection programme decided by the
licensing authority.
(2) Firearms, their parts, components or ammunition that have been illicitly
manufactured shall be permanently confiscated by the enforcement agencies.
(3) (a) Firearms, their parts, components or ammunition that are suspected of
having been illicitly manufactured may be seized temporarily in respect of the
following cases, namely:-
(i) if a manufacturing licence is suspended, revoked or cancelled, or if it
expires; or
(ii) the holder of a manufacturing licence is convicted of an offence; or
(iii) the licensing authority has grounds to believe that an offence has been
or is about to be committed and that the items to be seized are either
evidence of this or are themselves the subject matter of the offence
involved.
(b) Seized items that are found to have been illicitly manufactured shall be
confiscated and the items that are found not to have been illicitly manufactured
shall be promptly returned to their owner.
(4) (a) Firearms, their parts, components or ammunition that have been illicitly
manufactured shall be promptly disposed of, preferably through destruction in
accordance with these rules.
(b) A method of disposal other than destruction may be used, provided that the
firearms are first marked and registered, and the method of disposal is
recorded.
PART II
Manufacture of Replica of Firearms
55
67. Licence to manufacture replica of firearms.─ (1) A licence in Form VII-B
may be granted to any person, to manufacture replicas of antique (muzzle
loading) and contemporary (breech-loading) firearms for domestic market and
export purposes.
(2) The persons not holding any licence or persons holding a licence in Form I
for possession of machinery, or in Form IX for manufacture of firearms, under
the Arms Rules, 1962 shall apply for a new licence in Form VII-B for
manufacture and sale of replica of firearms within one year from the date of the
notification of these rules.
68. Inspection of samples of replica of firearms.─ (1) The manufacturers of
replicas of firearms shall keep not more than fifty samples of each type of
replicas at any given time.
(2) The manufacturer of replica of firearms shall, before commencement of
manufacture, cause inspection by Directorate of Inspection, Department of
Defence Production, Ministry of Defence of sample of each type of replica at
the cost to be borne by the manufacturer, by submitting to the Directorate of
Inspection ─
(i) three specimens of each type of replica proposed to be manufactured;
(ii) five copies of photos or drawings of each type of replica describing its main
parts; and
(iii) the original and one copy of the licence issued in Form VII-B.
(3) After inspection, the Directorate of Inspection shall certify on the photos or
drawings the innocuousness of the replicas and such certificates shall be sealed
on each of the three specimens of replica submitted for inspection.
(4) One sample of each type of replica inspected along with a certified copy of
its photo or drawing shall be delivered to the Ministry of Home Affairs for
retention.
(5) The original licence in Form VII-B along-with the remaining two samples
of inspected replicas and two copies of certified photos or drawing shall be
sealed and delivered to the manufacturer who shall deposit one inspected
specimen, one certified copy of its photo or drawing with the district magistrate
of the district in which the replicas are to be manufactured.
(6) The third inspected specimen and one copy of the certified photo or
drawing shall be retained by the manufacturer.
(7) The Directorate of Inspection shall retain the copy of the licence in Form
VII-B and two copies of the certified photos or drawing.
69. Markings of replicas of firearms.─ (1) The name of manufacturer shall be
engraved on each replica manufactured for sale as below:
“Replica of fire-arm manufactured by Messrs
(Name of the firm and city) India”.
56
(2) The manufacturer shall also engrave on each replica –
(i) type of replica;
(ii) manufacturer’s serial number; and
(iii) date of the inspection of the specimen by the Directorate of
Inspection.
Illustration:
If four different types are approved after inspection, the specimens will be
described as A, B, C and D and the following shall be engraved on each replica
in addition to the name of manufacturer vide sub-rule (1):-
"A/001 (DD-MM-YYYY)" where,─
‘A' represents the type of approved replica;
'001' represents the serial number; and
the date within brackets indicates the date of certificate of inspection recorded
by the Directorate of Inspection.
70. Maintenance of records by manufacturer of replicas of firearms.─ (1) The
manufacturer shall maintain records of manufacture and sale of replicas in the
format given in the following table, namely:-–
Table
(
2
)
The records shall be inspected by the licensing authority of the jurisdiction of
the licensee.
(3) The replicas manufactured, which correspond to inspected samples shall be
allowed to be sold in India or exported to foreign countries.
(4) (a) The licensee shall establish an online electronic connectivity under his
user-id with the NDAL system and provide for a weekly electronic online
transfer of data regarding replicas of firearms manufactured and sold for the
week, as recorded in the register referred to in sub-rule (1).
(b) If any circumstances occur which prevent a licensee to submit online
returns on NDAL system by means of electronic network connectivity, the
local licensing authority shall be informed immediately in order to establish
alternative means for submission of the weekly returns.
Serial
No. of
firearm
replica
manufa
ctured
Date of
manuf
acture
Date of
disposal
Name and
address of
purchaser
if sold to
individual
in India
Name and
address of
arms
dealers to
whom
supplied
for sale or
export
Particulars
of export
permission
received if
exported
directly
Particulars
of
certificate
of
innocuous-
ness
Balance
Stock in
hand
(1) (2) (3) (4) (5) (6)
(7) (8)
57
(c) Weekly returns for the current week shall be submitted by the close of
business hours on every Saturday.
Previous and next
← Rule 52Type of firearms for grant of a licence in Form VII for manufacture and proof test.─ The licensing authority may grant a licence in Form VII for the following types of arms for manufacture or proof test or both, namelyRule 71 →Procedure for making replicas of firearms innocuous.− The replicas of firearms may be made innocuous through any of the following methods, namely
Questions people ask
Is rule 53 of THE ARMS RULES, 2016 1 still in force?
No repeal of the ARMS RULES, 2016 1 is recorded.