Form OF RENEWAL OF LICENCE, THE ARMS RULES, 2016 1: FORM OF RENEWAL OF LICENCE
THE ARMS RULES, 2016 1 - Form OF RENEWAL OF LICENCE
Text of form OF RENEWAL OF LICENCE
FORM OF RENEWAL OF LICENCE
FORM OF RENEWAL OF LICENCE
Date and year of
renewal
Date on which the
renewed licence
expires
Signature and designation of
renewing authority
SEAL
1 2 3 4
119
Conditions
1. (a) This licence is granted subject to all the provisions of the Arms Act, 1959
and of the Arms Rules, 2016.
(b) This licence entitles the licensee to manufacture or proof-test firearms or
ammunition as specified in column 3 and 5 respectively.
2. The licensee shall be required to construct the factory premises, set-up plant
and machinery within 7 years of the grant of licence.
3. The licensee is permitted to conduct trial runs and develop proto-types within
the initial validity period of licence.
4. The licensee should preferably be self-sufficient in areas of product design and
development and should have maintenance and life cycle support facility of
the product to be manufactured or proof-tested.
5. The standards and testing procedures for firearms and ammunition to be
produced under licence from foreign collaborators or from indigenous research
and development shall be provided by the licensee to the Government
nominated Quality Assurance Agency, which will inspect the finished product
in the trial run and conduct surveillance and audit of the Quality Assurance
Procedures before the licensee applies for permission for commencement of
commercial production.
6. The licensee setting up a new manufacturing or proof test facility shall fully
comply with the security conditions contained in the Security Manual prepared
by the Department of Defence Production, Ministry of Defence before filing
intimation for commencement of commercial production for manufacture of
firearms and ammunition.
(a) This licence entitles the licensee to take any arms or ammunition for
testing to an accredited shooting range with prior permission of the
licensing authority.
(b) This licence is valid only so long as the licensee carries on the
manufacture and/or proof-test in the premises shown in column 1
thereof, and will ipso facto lapse if the business is discontinued for a
continuous period exceeding six months.
(c) The licensee shall not enter into any partnership connected with this
licence without the approval of the licensing authority.
7 The licensee shall maintain registers of all arms manufactured or proof-tested,
of all ammunition manufactured, or transferred, of all stock in hand, and of all
sales, showing the particulars in such forms as prescribed in the rules. Further,
the licensee shall carry on the work of proof testing and stamp proof-marks on
the firearms, which are proved, in accordance with rule 59 of these rules.
120
8 The licensee shall make available for inspection his stock and his registers on
the demand of any magistrate or any police officer of a rank not below that of
Inspector, or, if the Central Government so directs, of Sub-Inspector.
9 The licensee shall affix on a conspicuous part of his place of business and
factory a signboard on which shall be painted in large letters in English / Hindi
and in the language of the district his name and the words “Licensed to
manufacture and/or proof test Firearms and Ammunition”
10 The licensee shall not manufacture firearms and ammunition of any category
or description other than those allowed to be manufactured under column 2
and 4; nor expand his business, except with the prior permission of the Central
Government and subject to such conditions as may be prescribed by the
Central Government.
11 The licensee shall not sell to anyone any firearm manufactured by him unless
such firearm -
(a) is duly proof-tested at a Government establishment or a proof house
licensed under these rules or in case of a composite licence proof-tested
in house;
(b) bears proof-mark; and
(c) bears identification marks required by rule 58.
12 The licensee shall not sell firearms or ammunition elsewhere than at the place
of business or factory specified in column 1.
13 The licensee shall at the time of sale or transfer of a firearm enter in his
register the manufacturer’s serial number and other identification marks, if
any, stamped on the fire-arm at the time of manufacture or otherwise.
14 The licensee shall give information of all sales or transfers of arms and
ammunition, to such persons and in such manner as the Central Government
may direct.
15 The licensee shall not sell or transfer any quantity of ammunition to any
person licensed to possess or carry arms or ammunition without his first
obtaining a written certificate from such person to the effect that, with the
quantity of ammunition proposed to be purchased by him, the total quantity in
his possession will not exceed the maximum quantity which he is entitled to
possess at any one time or his total allowance for the year:
Provided that he shall not, in any case, sell or transfer to any
person any quantity of ammunition in excess of the maximum which may be
fixed by the Central Government for such person or which is endorsed on such
person’s licence.
121
16 The licensee shall, at the time of sale or transfer of any arms or ammunition to
a person holding a licence in Form III, Form IV or Form V endorse on the
licence -
(a) the name, description and residence of the person who takes delivery
of the articles sold or transferred,
(b) the nature and quantity of the articles sold or transferred, and
(c) the date of sale or transfer; and
shall sign the endorsement (and affix his seal).
17 The licensee shall not sell firearms and ammunition to an officer, non-
commissioned officer or soldier of the armed forces of the Union, unless such
person produces a written pass or permit signed by his Commanding Officer,
and then only to the extent and on the conditions specified in such pass or
permit.
Conditions related to Inventory Management System as per rule 56(5)
1.1 Separation of powers
Checks and balances should be put in place to ensure that personnel involved
in the management of manufacturing of arms and ammunition facility do not
simultaneously hold responsibilities that would make it easier for them to steal
or otherwise divert firearms while hiding their malfeasance from view.
For example, -
(a) the same personnel should not be responsible simultaneously for
conducting storekeeping, accounting and auditing functions;
(b) personnel responsible for physically verifying the transfer of
firearms should not be responsible for compiling the physical
records of the firearm transfers;
(c) Personnel responsible for firearms accounting should not participate in
stock checks without the direct supervision of storage personnel;
(d) Regular external audits of firearms stocks should be carried out by
independent bodies.
1.2 Firearms Account
An account shall be maintained at each manufacturing facility that records the
following information for each firearm in storage:
(a) make;
(b) model;
(c) caliber;
(d) serial number;
(e) date entered into finished stock;
122
(f) date transferred/sold/exported;
(g) record of modifications and/or repairs; and
(h) overall quantity of firearms, disaggregated by type.
The firearms account should be in electronic form and shall be ‘backed up’.
Backups should be in both electronic and hard copy, but may be only in hard
copy. In addition uploading of data on NDAL for the current week
transactions is mandatory by the close of business hours on every Saturday.
Whatever form the backups take, they shall be stored separately from the
original and from each other in order to prevent the loss of all data in the event
of theft, fire, etc. at the weapons accounting office. Firearms accounts should
be kept indefinitely.
1.3 Issue of firearms
Only authorised officials shall remove firearms and ammunition from
manufacturing unit’s storage areas. A system to positively identify and
authenticate persons authorised to remove firearms from storage areas shall be
developed and implemented.
Such a system should include a register or log, which can be easily cross-
referenced with the firearms account that records at least the following
information:
(a) name and signature of individual removing firearm(s);
(b) date and time of issue and return of firearm(s);
(c) make, model and serial number of firearm(s) removed and
returned; and
(d) purpose of removal of firearm(s).
1.4 Stock checks
The contents of firearms stock shall be verified on a regular basis against the
firearm account, specifically, -
(a) a physical stock check by quantity and type of firearms should be
conducted –
- every day in the case of smaller volume manufacturing unit;
- every week in the case of larger volume manufacturing unit.
(b) a physical stock check by serial number should be conducted on at least
10% of the firearms in stock –
- every week in the case of smaller volume manufacturing unit, and
- every month in the case of larger volume manufacturing unit
123
(c) a 100% physical stock check by quantity, type and serial number
should be conducted –
- every six months, regardless of the quantity of firearms in storage, and
- whenever the custody of keys is permanently transferred between an in-
coming and outgoing key custodian.
1.5 Reporting of losses and investigations
Any suspected loss or theft of a firearm shall immediately be reported to the
appropriate authority, which should immediately instigate an independent
investigation by an individual or organisation unconnected with the firearms
management system.
An investigation report should be compiled, including the following
information:
(a) identity of the firearm, including its
(1) make,
(2) model,
(3) caliber,
(4) serial number
(b) date, location and unit involved;
(c) summary of circumstances of loss;
(d) explanation of loss (e.g. negligence, theft, etc.);
(e) disciplinary and/or criminal action taken;
(f) recommendations to prevent a reoccurrence;
(g) date and location of recovery of the firearm(s) (if applicable);
(h) summary of circumstances of recovery (if applicable)
The identity of lost or stolen firearms, as set out in (a) above, shall be recorded
and retained in NDAL system in order to facilitate their timely identification
upon recovery.
When processing inventory adjustments, no firearm loss shall be attributed to
an accounting or inventory discrepancy unless an investigation has determined
that the loss was not a result of theft.
1.6 Determination of surplus stocks
It is the prerogative of the manufacturing units to review the types and
numbers of firearms with a view to determining the types and numbers of
firearms that have become surplus to national/international requirements.
124
Surplus stocks are understood as functioning firearms (including their parts,
components and ammunition) that are no longer required by the armed
services of the State in order to ensure internal and external security nor could
be exported to legitimate buyers. Firearms determined to be surplus should be
-
(a) officially declared as surplus;
(b) recorded as surplus in the firearms account;
(c) taken out of service;
(d) stored separately; and
(e) destroyed in accordance with the guidelines
125
Previous and next
Questions people ask
Is form OF RENEWAL OF LICENCE of THE ARMS RULES, 2016 1 still in force?
No repeal of the ARMS RULES, 2016 1 is recorded.