LawGrids logoLAWGRIDS.ORG

Rule 22, E-Waste (Management) Rules, 2016: Appeal

E-Waste (Management) Rules, 2016 - Rule 22

Text of rule 22

Appeal

22. Appeal.- (1) Any person aggrieved by an order of suspension or cancellation or refusal of authorisation or its renewal passed by the Central Pollution Control Board or State Pollution Control Board may, within a period of thirty days from the date on which the order is communicated to him, prefer a appeal in Form 7 to the Appellate Authority comprising of the Environment Secretary of the State. (2) The Appellate Authority may entertain the appeal after expiry of the said period of thirty days if it is satisfied that the appellant was prevented by sufficient cause from filing the appeal in time. (3) Every appeal filed under this rule shall be disposed of within a period of sixty days from the date of its filing. 23. The collection, storage, transportation, segregation, refurbishment, dismantling, recycling and disposal of e-waste shall be in accordance with the procedures prescribed in the guidelines published by the Central Pollution Control Board from time to time. Implementation of e-waste (Management and Handling) Amendment Rules, 2011 shall be in accordance with the guidelines prescribed by the Central Pollution Control Board from time to time. 24. Urban Local Bodies (Municipal Committee or Council or Corporation) shall ensure that e-waste pertaining to orphan products is collected and channelised to authorised dismantler or recycler. ****** 17 SCHEDULE I [See rules 2, 3(j), 3(y), 3(aa) and 3(ff); 5; 9; 11(10); 13 (1) (i), 13 (1) (vii) and 16(1), 16(11)] Categories of electrical and electronic equipment including their components, consumables, parts and spares covered under the rules Sr. No. Categories of electrical and electronic equipment Electrical and electronic equipment code i. Information technology and telecommunication equipment : Centralised data processing: Mainframes, Minicomputers ITEW1 Personal Computing: Personal Computers (Central Processing Unit with input and output devices) ITEW2 Personal Computing: Laptop Computers(Central Processing Unit with input and output devices) ITEW3 Personal Computing: Notebook Computers ITEW4 Personal Computing: Notepad Computers ITEW5 Printers including cartridges ITEW6 Copying equipment ITEW7 Electrical and electronic typewriters ITEW8 User terminals and systems ITEW9 Facsimile ITEW10 Telex ITEW11 Telephones ITEW12 Pay telephones ITEW13 Cordless telephones ITEW14 Cellular telephones ITEW15 Answering systems ITEW16 ii. Consumer electrical and electronics: Television sets (including sets based on (Liquid Crystal Display and Light Emitting Diode technology) CEEW1 Refrigerator CEEW2 Washing Machine CEEW3 Air-conditioners excluding centralised air conditioning plants CEEW4 Fluorescent and other Mercury containing lamps CEEW5 18 SCHEDULE II [See rules 16 (3), 16 (4) and 16 (11)] Applications, which are exempted from the requirements of sub-rule (1) of rule 16 Substance 1 Mercury in single capped (compact) fluorescent lamps not exceeding (per burner): 1(a) For general lighting purposes <30 W : 2.5 mg 1(b) For general lighting purposes ≥ 30 W and <50 W : 3.5mg 1(c) For general lighting purposes ≥ 50 W and <150 W : 5mg 1(d) For general lighting purposes ≥150 W : 15 mg 1(e) For general lighting purposes with circular or square structural shape and tube diameter ≤17 mm : 7mg 1(f) For special purposes:5 mg 2(a) Mercury in double-capped linear fluorescent lamps for general lighting purposes not exceeding (per lamp): 2(a)(1) Tri-band phosphor with normal life time and a tube diameter < 9mm (e.g. T2): 4mg m mm mmkh mmmmmmm (e.g.T2) : 4 mg 2(a)(2) Tri-band phosphor with normal life time and a tube diameter ≥ 9 mm and ≤ 17 mm (e.g. T5): 3 mg 2(a)(3) Tri- band phosphor with normal life time and a tube diameter >17 mm and ≤ 28 mm(e.g. T8): 3.5 mg 2(a)(4) Tri-band phosphor with normal life time and a tube diameter >28 mm (e.g. T 12):3.5 mg 2(a)(5) Tri-band phosphor with long life time (≥25000 h):5mg 2(b) Mercury in other fluorescent lamps not exceeding(per lamp): 2(b)(1) Linear halophosphate lamps with tube >28 mm (e.g. T 10 and T12):10 mg 2(b)(2) Non-linear halophosphate lamps(all diameters):15mg 2(b)(3) Non-linear tri-band phosphor lamps with tube diameter >17 mm(e.g.T9): 15 mg 2(b)(4) Lamps for other general lighting and special purposes (e.g. induction lamps):15mg 3 Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL)for special purposes not exceeding (per lamp): 3(a) Short length( < 500 mm):3.5mg 3(b) Medium length(>500 mm and<1500 mm): 5mg 3(c) Long length(>1500 mm): 13mg 4(a) Mercury in other low pressure discharge lamps (per lamp): 15mg 4(b) Mercury in High Pressure Sodium(vapour) lamps for general lighting purposes not exceeding (per burner)in lamps with improved colour rendering index Ra>60: 19 4(b)-I P ≤155 W : 30 mg 4(b)-II 155 W < P <405 W : 40 mg 4(b)-III P >405 W: 40 mg 4(c) Mercury in other High Pressure Sodium(vapour)lamps for general lighting purposes not exceeding (per burner): 4(c)-I P<155 W:25mg 4(c)-II 155 W < P < 405 W:30 mg 4(c)-III P >405 W:40 mg 4(d) Mercury in High Pressure Mercury (vapour) lamps (HPMV) 4(e) Mercury in metal halide lamps (MH) 4(f) Mercury in other discharge lamps for special purposes not specifically mentioned in this Schedule 5(a) Lead in glass of cathode ray tubes 5(b) Lead in glass of fluorescent tubes not exceeding 0.2% by weight 6(a) Lead as an alloying element in steel for machining purposes and in galvanized steel containing up to 0.35% lead by weight 6(b) Lead as an alloying element in aluminium containing up to 0.4% lead by weight 6(c) Copper alloy containing up to 4% lead by weight 7(a) Lead in high melting temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead) 7(b) Lead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signalling, transmission, and network management for telecommunications 7(c)-I Electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound. 7(c)-II Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher 7(c)-III Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC 8(a) Cadmium and its compounds in one shot pellet type thermal cut-offs 8(b) Cadmium and its compounds in electrical contracts 9 Hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0.75% by weight in the cooling solution 9(b) Lead in bearing shells and bushes for refrigerant-containing compressors for heating, ventilation, air conditioning and refrigeration (HVACR) application. 20 11(a) Lead used in C-press compliant pin connector systems 11(b) Lead used in other than C-press compliant pin connector systems 12 Lead as a coating material for the thermal conduction module C- ring 13(a) Lead in white glasses used for optical applications 13(b) Cadmium and lead in filter glasses and glasses used for reflectance standards. 14 Lead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors with a lead content of more than 80% and less than 85% by weight 15 Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages. 16 Lead in linear incandescent lamps with silicate coated tubes 17 Lead halide as radiant agent in high intensity discharge (HID) lamps used for professional reprography applications. 18(a) Lead as activator in the fluorescent powder (1% lead by weight or less) of discharge lamps when used as specialty lamps for diazoprinting reprography, lithography, insect traps, photochemical and curing processes containing phosphors such as SMS ((Sr, Ba)2Mg Si2O7:Pb) 18(b) Lead as activator in the fluorescent powder (1% lead by weight or less) of discharge lamps when used as sun tanning lamps containing phosphors such as BSP (Ba Si2O5:Pb) 19 Lead with PbBiSn-Hg and PblnSn-Hg in specific compositions as main amalgam and with PbSn-Hg as auxiliary amalgam in very compact energy saving lamps (ESL) 20 Lead oxide in glass used for bonding front and rear substrates of flat fluorescent lamps used for Liquid Crystal Displays (LCDs) 21 Lead and cadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses 23 Lead in finishes of fine pitch components other than connectors with a pitch of 0.65 mm and less 24 Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors 25 Lead oxide in surface conduction electron emitter displays (SED) used in structural elements, notably in the seal frit and frit ring. 26 Lead oxide in the glass envelope of black light blue lamps 27 Lead alloys as solder for transducers used in high-powered (designated to operate for several hours at acoustic power levels of 125 dB SPL and above) loudspeakers 29 Lead bound in crystal glass 21 30 Cadmium alloys as electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB(A) and more 31 Lead in soldering materials in mercury free flat fluorescent lamps (which e.g. are used for liquid crystal displays, design or industrial lighting) 32 Lead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes 33 Lead in solders for the soldering of thin copper wires of 100 µm diameter and less in power transformers 34 Lead in cermet-based trimmer potentiometer elements 36 Mercury used as a cathode sputtering inhibitor in DC plasma displays with a content up to 30 mg per display 37 Lead in the plating layer of high voltage diodes on the basis of a zinc borate glass body 38 Cadmium and cadmium oxide in thick film pastes used on aluminium bonded beryllium oxide 39 Cadmium in colour converting II-VI LEDs (<10 µg Cd per mm2of light- emitting area) for use in solid state illumination or display systems. 22 SCHEDULE III [See rules 5 (1) (a) and 13 (1) (ii)] Targets for Extended Producer Responsibility - Authorisation No. Year E-Waste Collection Target (Number/Weight) (i) During first two year of implementation of rules 30% of the quantity of waste generation as indicated in Extended Producer Responsibility Plan. (ii) During third and fourth years of implementation of rules 40% of the quantity of waste generation as indicated in Extended Producer Responsibility Plan. (iii) During Fifth and Sixth years of implementation of rules 50% of the quantity of waste generation as indicated in Extended Producer Responsibility Plan. (iv) Seventh year onward of implementation of rules 70% of the quantity of waste generation as indicated in Extended Producer Responsibility Plan. 23 SCHEDULE IV [See rule (17)] LIST OF AUTHORITIES AND CORREPONDING DUTIES Sr. No AUTHORITY CORRESPONDING DUTIES 1. Central Pollution Control Board, Delhi (i) Grant and Renewal of Extended Producer Responsibility - Authorisation and monitoring of its compliance. (ii) Maintain information on Extended Producer Responsibility - Authorisation on its web site. (iii) Set and revise targets for collection of e-waste from time to time. (iv) Coordination with State Pollution Control Boards (v) Preparation of Guidelines for Environmentally Sound Management of e-waste. (vi) Conduct random check for ascertaining compliance of the e-waste rules and identification of such importers or producers who have not applied for Extended Producer Responsibility authorisation or are not complying with RoHS provision. Wherever necessary, Central Pollution Control Board will seek the help of customs department or any other agency of the Government of India. (vii) Conduct random inspection of dismantler or recycler or refurbisher. (viii) Documentation, compilation of data on e-waste and uploading on websites of Central Pollution Control Board (ix) Actions against violation of these rules. (x) Conducting training programmes. (xi) Submit Annual Report to the Ministry. (xii) Enforcement of provisions regarding reduction in use of hazardous substances in manufacture of electrical and electronic equipment. (xiii) Interaction with IT industry for reducing hazardous substances. (xiv) Set and revise targets for compliance to the reduction in use of hazardous substance in manufacture of electrical and electronic equipment from time to time. (xv) Any other function delegated by the Ministry under these rules from time to time. 2. State Pollution Control Boards or Committees of Union territories (i) Inventorisation of e-waste. (ii) Grant and renewal of authorisation to manufacturers, dismantlers, recyclers and refurbishers. (iii) Monitoring and compliance of Extended Producer Responsibility - Authorisation as directed by Central Pollution Control Board and that of dismantlers, recyclers and refurbishers authorisation. (iv) Conduct random inspection of dismantler or recycler or refurbisher. (v) Maintain online information regarding authorisation granted to manufacturers, dismantlers, recyclers and refurbishers. 24 Sr. No AUTHORITY CORRESPONDING DUTIES (vi) Implementation of programmes to encourage environmentally sound recycling. (vii) Action against violations of these rules. (viii) Any other function delegated by the Ministry under these rules. 3. Urban Local Bodies (Municipal Committee or Council or Corporation) (i) To ensure that e-waste if found to be mixed with Municipal Solid Waste is properly segregated, collected and is channelised to authorised dismantler or recycler. (ii) To ensure that e-waste pertaining to orphan products is collected and channelised to authorised dismantler or recycler. 4. Port authority under Indian Ports Act, 1908 (15 of 1908) and Customs Authority under the Customs Act, 1962 (52 of 1962) (i) Verify the Extended Producer Responsibility - Authorisation. (ii) Inform Central Pollution Control Board of any illegal traffic for necessary action. (iii) Take action against importer for violations under the Indian Ports Act, 1908/Customs Act, 1962. **** 25

Previous and next

All provisions of E-Waste (Management) Rules, 2016

Questions people ask

Is rule 22 of E-Waste (Management) Rules, 2016 still in force?

No repeal of E-Waste (Management) Rules, 2016 is recorded.