Rule 5, E-Waste (Management) Rules, 2016: Responsibilities of the producer
E-Waste (Management) Rules, 2016 - Rule 5
Text of rule 5
Responsibilities of the producer
5. Responsibilities of the producer. - The producer of electrical and electronic
equipment listed in Schedule I shall be responsible for -
(1) implementing the Extended Producers Responsibility with the following
frameworks, namely:-
(a) collection and channelisation of e-waste generated from the ‘end-of-life’ of their
products or ‘end-of-life’ products with same electrical and electronic equipment
code and historical waste available on the date from which these rules come into
force as per Schedule I in line with the targets prescribed in Schedule III in
Extended Producer Responsibility - Authorisation;
(b) the mechanism used for channelisation of e-waste from ‘end-of-life’ products
including those from their service centres to authorised dismantler or recycler shall
be in accordance with the Extended Producer Responsibility - Authorisation. In
cases of fluorescent and other mercury containing lamps, where recyclers are not
available, channelisation may be from collection centre to Treatment, Storage and
Disposal Facility;
(c) for disposal in Treatment, Storage and Disposal Facility, a pre-treatment is
necessary to immobilise the mercury and reduce the volume of waste to be
disposed off;
(d) Extended Producer Responsibility - Authorisation should comprise of general
scheme for collection of waste Electrical and Electronic Equipment from the
Electrical and Electronic Equipment placed on the market earlier, such as through
dealer, collection centres, Producer Responsibility Organisation, through buy-back
arrangement, exchange scheme, Deposit Refund System, etc. whether directly or
through any authorised agency and channelising the items so collected to
authorised recyclers;
(e) providing contact details such as address, e-mail address, toll-free telephone
numbers or helpline numbers to consumer(s) or bulk consumer(s) through their
website and product user documentation so as to facilitate return of end-of-life
electrical and electronic equipment;
(f) creating awareness through media, publications, advertisements, posters, or by
any other means of communication and product user documentation
accompanying the equipment, with regard to -
6
(i) information on address, e-mail address, toll-free telephone numbers or helpline
numbers and web site;
(ii) information on hazardous constituents as specified in sub-rule 1 of rule 16 in
electrical and electronic equipment;
(iii) information on hazards of improper handling, disposal, accidental breakage,
damage or improper recycling of e-waste;
(iv) instructions for handling and disposal of the equipment after its use, along with
the Do’s and Don’ts;
(v) affixing a visible, legible and indelible symbol given below on the products or
product user documentation to prevent e-waste from being dropped in garbage
bins containing waste destined for disposal;
(vi) means and mechanism available for their consumers to return e-waste for
recycling including the details of Deposit Refund Scheme, if applicable;
(g) the producer shall opt to implement Extended Producer Responsibility individually
or collectively. In individual producer responsibility, producer may set up his own
collection centre or implement take back system or both to meet Extended
Producer Responsibility. In collective system, producers may tie-up as a member
with a Producer Responsibility Organisation or with e-waste exchange or both. It
shall be mandatory upon on the individual producer in every case to seek
Extended Producer Responsibility - Authorisation from Central Pollution Control
Board in accordance with the Form-1 and the procedure laid down in sub-rule (1)
of rule 13;
(2) to provide information on the implementation of Deposit Refund Scheme to ensure
collection of end-of-life products and their channelisation to authorised dismantlers
or recyclers, if such scheme is included in the Extended Producer Responsibility
Plan.
Provided that the producer shall refund the deposit amount that has been taken
from the consumer or bulk consumer at the time of sale, along with interest at the
prevalent rate for the period of the deposit at the time of take back of the end-of-
life product;
(3) the import of electrical and electronic equipment shall be allowed only to producers
having Extended Producer Responsibility authorisation;
(4) maintaining records in Form-2 of the e-waste handled and make such records
available for scrutiny by the Central Pollution Control Board or the concerned
State Pollution Control Board;
(5) filing annual returns in Form-3, to the Central Pollution Control Board on or before
the 30th day of June following the financial year to which that return relates. In
case of the Producer with multiple offices in a State, one annual return combining
information from all the offices shall be filed;
7
(6) the Producer shall apply to the Central Pollution Control Board for authorisation in
Form 1, which shall thereafter grant the Extended Producer Responsibility -
Authorisation in Form 1(aa).
(7) Operation without Extended Producer Responsibility-Authorisation by any
producer, as defined in this rule, shall be considered as causing damage to the
environment.
Previous and next
Questions people ask
Is rule 5 of E-Waste (Management) Rules, 2016 still in force?
No repeal of E-Waste (Management) Rules, 2016 is recorded.