Rule 6, Punjab Legal Metrology (Enforcement) Rules 2013 with amendments: Verification and inspection of weights or measures
Punjab Legal Metrology (Enforcement) Rules 2013 with amendments - Rule 6
Text of rule 6
Verification and inspection of weights or measures
6. Verification and inspection of weights or measures. -(1) Every
person using any weight or measure in any transaction or for protection shall
present such weight or measure for verification / re-verification, at the office
of the legal metrology officer or at such other place as the legal metrology
officer may specify in this behalf on or before the date on which the verification
falls due:
Provided that where any weight or measure is such that it cannot
or should not be moved from its location, the person using such weight or
measure shall report to the legal metrology officer at least thirty days in
advance of the date on which the verification falls due.
(2) Where any weight or measure is such that it cannot, or should not,
be moved from it’s location, legal metrology officer shall take necessary steps
for the verification of such weight or measure at the place of its location.
(3) For the verification of weight or measure referred to in sub-rule
(2), the user shall provide such facilities as may be specified by the Controller.
(4) Every weight or measure presented for verification shall be complete
in itself.
(5) Every weight or measure shall be verified in a clean condition, and
if necessary, the legal metrology officer shall require the owner or user to
make necessary arrangement for the purpose.
(6) A legal metrology officer may visit, as frequently as possible during
the period specified in rule 27, of the Legal Metrology (General) Rules, 2011,
framed by the Central Government, every premise within the local limits of his
jurisdiction to inspect and test any weight or measure which is being or is
intended or likely to be used in any transaction or for protection.
(7) The legal metrology officer shall obliterate the stamp on any weight
Sections 17(1)
and 53(2)(b)
Sections 24(1)
and 53(2)
PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013
(KRTK 22, 1935 SAKA)
1301
or measure, if during inspection, it is found that,-
(a) Any weight or measure which being due for re-verification has not
been presented for such re-verification.
(b) Any weight or measure, which does not conform to the standards,
established by or under the Act:
Provided that where the legal metrology officer is of the opinion
that the defect or error in such weight or measure is not such as to
require immediate obliteration of the stamp, he shall inform the
user, of the defect or error found in the weight or measure and call
upon the user to remove the defect or error within such time not
exceeding eight days and shall –
(i) if the user fails to remove the defect or error within that
period, obliterate the stamp; or
(ii) if the defect or error is so removed as to make the weight or
measure conform to the standards established by or under
the Act, verify and stamp such weight or measure.
Explanation:- The obliteration of the stamp on any weight or measure shall
not take away or abridge the power of the legal metrology officer to seize
such weight or measure in accordance with the Provisions of the Act.
Previous and next
All provisions of Punjab Legal Metrology (Enforcement) Rules 2013 with amendments
Questions people ask
Is rule 6 of Punjab Legal Metrology (Enforcement) Rules 2013 with amendments still in force?
No repeal of Punjab Legal Metrology (Enforcement) Rules 2013 with amendments is recorded.