LawGrids logoLAWGRIDS.ORG

Form LD-3, Punjab Legal Metrology (Enforcement) Rules 2013 with amendments: Form - LD-3

Punjab Legal Metrology (Enforcement) Rules 2013 with amendments - Form LD-3

Text of form LD-3

Form - LD-3

Form - LD-3 Government of Punjab Office of the controller of legal metrology, Punjab License to a dealer in weights, measures, weighing instruments or measuring instruments License No…………… Year…….. 1- The Controller of legal metrology hereby grants to…………………… (Name and address of Party or Parties) a license to deal in the following (Indicate details of the types weights, measures, weights, or measuring instru- ments that are licensed to be dealt by the party) 2- The license is valid for the party named above in respect of his premises located at………… 3- This license is valid from ……………….. to ……………….. 4- The dealer shall comply with the conditions noted below. If he fails to comply with any one of those his license is liable to be cancelled. (Signature) Controller of legal Metrology, Punjab (Seal) Date…………… Place…………. Note: In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph (1). CONDITIONS OF LICENSE 1. The person in whose favour this license is issued shall:- (a) Comply with all the relevant provisions of the Act and Rules for the time being in force; (b) Not encourage or countenance any infringement of the provisions of the Act, or the Rules for the time being in force; PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1323 (c) Exhibit this license in some conspicuous part of the premises to which it relates; (d) Comply with any general or special directions that may be given by the Controller of legal metrology; (e) Surrender the license in the event of closure of business and / or cancellation of License; (f) Submit the application for renewal of this license as required under the rules within thirty days of expiry of the validity of the license. (g) Not sell or offer, expose or possess for sale any non-standard weight or measure. 2. Every condition prescribed after the issue of this license shall, if notified in the Official Gazette, be binding on the persons to whom the license has been granted. Renewal entries Current No…… Date………. Renewed for Seal Controller of Legal Metrology Current No…… Date………. Renewed for Seal Controller of Legal Metrology Current No…… Date………. Renewed for Seal Controller of Legal Metrology Current No…… Date………. Renewed for Seal Controller of Legal Metrology Current No…… Date………. Renewed for Seal Controller of Legal Metrology Current No…… Date………. Renewed for Seal Controller of Legal Metrology PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1324 SCHEDULE – X [See rule 3 (3) (4) ] Government of Punjab Office of the controller of legal metrology, Punjab, License and renewal fees for manufacturers, repairers of dealers of weights and measures 1. Issue of license / renewal of license to: (i) Manufacturers Rs. 5000/- per year (ii) Repairers Rs. 2000/- per year (iii) Dealers Rs. 1000/- per year 2. Alteration of license: Rs. 500/- 3. Issue of duplicate license: Rs. 100/- PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1325 SCHEDULE – XI [See rule 3 (4] Form LM – 2 [Application for renewal of License as Manufacturer of Weights and Measures under the Legal Metrology Act, 2009] To, The Controller, Legal Metrology, Punjab, To be filled by the Comments of the Applicant Inspection officer (1) (2) (3) 1. Name and complete address of the manufacturing concern for which renewal of license is desired. …………………… 2. Manufacturing License No. …………………… 3. Name (s) and address (s) along with their father’s/ husband\s name of proprietor(s) and/or Partners and Managing Director(s) in the case of Limited company. …………………… 4. (a) Type of weights and measures which are manufactured as per license granted. …………………… (b) Do you propose any change? …………………… 5. The monogram or trade marks used on weights and measures manufactured by you. …………………… 6. Details of workshop facilities available. …………………… 7. Details of production and sales in the last 5 years. …………………… 8. Number and date of shop/establishment Registration Number. …………………… PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1326 9. Registration Number of VAT/Sales Tax/ CST/ Professional Tax/Income Tax. …………………… To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Punjab Legal Metrology (Enforcement) Rules, 2013 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposited the Scheduled license fees of Rs……………. (Rupees ……………………………………………………) to the Sub- Treasury/Bank on ………………………………… and the original challan is enclosed. All the information furnished above is true to the best of my/our knowledge. Place: …………………… Date: Signature and Designation PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1327 SCHEDULE – XII [See rule 3 (4] Form LR – 2 [Application for renewal of License as repairer of Weights and Measures under the Legal Metrology Act, 2009] To, The Controller, Legal Metrology, Punjab, To be filled by the Comments of the Applicant Inspection officer (1) (2) (3) 1. Name and complete address of the ……………… repairing concern for which renewal of license is desired. 2. Repairer’s License Number …………………… 3. Name (s) and address (s) along with .…………………… their father’s/ husband\s name of proprietor(s) and/or Partners and Managing Director(s) in the case of Limited company 4. Registration Number and date of …………………… current shop/establishment / Municipal Trade License. 5. Registration Number of VAT/Sales …………………… Tax/CST/ Professional Tax/Income Tax 6. (a) The type of weights and measures …………………… repaired as per license granted. (b) Do you propose any change. …………………… 7. Area in which you are operating …………………… 8. Have you sufficient stock of loan/test weights, etc.? …………………… PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1328 9. Please give details with particular of stamping. …………………… To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Punjab Legal Metrology (Enforcement) Rules, 2013 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposited the Scheduled license fees of Rs……………. (Rupees ……………………………………………………) to the Sub- Treasury/Bank on ………………………………… and the original challan is enclosed. All the information furnished above is true to the best of my/our knowledge. Place: …………………… Date: Signature and Designation PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1329 SCHEDULE – XIII [See rule 3 (4] Form LD – 2 [Application for renewal of License as Dealer in Weights and Measures under the Legal Metrology Act, 2009] To, The Controller, Legal Metrology, Punjab To be filled by the Comments of the Applicant Inspection officer (1) (2) (3) 1. Name of the establishment/shop/person seeking the renewal of license. …………………… 2. Dealer’s License Number …………………… 3. Date of establishment. …………………… 4. Name (s) and address (s) along with their father’s/ husband\s name of proprietor(s) and/or Partners and Managing Director(s) in the case of Limited company. …………………… 5. Registration Number and date of shop/ establishment/ current Municipal Trade License. …………………… 6. Categories of weights and measures sold at present. …………………… 7. Registration Number of VAT/CST/Sales Tax/ Professional Tax/Income Tax. …………………… 8. Are you intending to import weights and measures etc. from places outside the State/Country? If so, indicate sources of supply from the State(s)/Country (s), (Give details of manufacturer’s trade mark/ monogram and his license number.) …………………… PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1330 To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Punjab Legal Metrology (Enforcement) Rules, 2013 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposited the Scheduled license fees of Rs……………. (Rupees ……………………………………………………) to the Sub-Treasury/Bank on ………………………………… and the original challan is enclosed. All the information furnished above is true to the best of my/our knowledge. Place: …………………… Date: Signature and Designation PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1331 SCHEDULE – XIV [See rule 3 (5)] Government of Punjab Office of the controller of legal metrology, Punjab, Register of licensed manufacturers/Repairers/Dealers of weights, measures, weighing / measuring instruments Office of …………………… License Date of Name and Place where Articles to be Number issue / complete work shop/ manufactured/ renewal address of factory is repaired/ sold the manufac- situated ture/ repairer / dealer 1 2 3 4 5 Trade mark/ Orders regar- Result of Signature of Remarks mono-gram ding cancel- appeal competent being used lation of authority license 6 7 8 9 10 Note: Column (4) does not apply to dealers; column (6) does not apply to repairers and dealers. PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1332 SCHEDULE – XV [See rule 3 (7)] Government of Punjab Office of the controller of legal metrology, Punjab Security deposit to be made by licensed repairer Repairer of weights and measures including Rs.5000.00 weighing and measuring instruments. PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1333 SCHEDULE – XVI [See rule 7 (3)] Government of Punjab Office of the Controller, Legal Metrology, Punjab, Certificate of verification Name of Legal Metrology Officer ……………………………………… No…………………………. I hereby certify that I have this day verified and stamped / rejected the under mentioned weights, measures etc. Belonging to ……………………….. Locality………………………….. Quant Denomination Weighing instruments Measu Verifi Carriage, ity ring cation convey Weig Measu Instru Fee Rs. ance hts res ments P adjusting charges etc. 1 2 3 4 5 6 7 8 9 10 Total Rs……… deposited vide T.Receipt/Money receipt No………. dated…….. Repaired by / Used by ……………………. (Signature) Next verification due on………………… Legal Metrology Officer Note:- (1) In the case of rejected weights, measures, etc. the legal metrology officer shall give separate Certificate of rejection mentioning the rea- sons of rejection against each item. (2) The certificate of verification shall be displayed in conspicuous place where the Weights and measures are used. (Rule 14) PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1334 Schedule – XVII [See rule 9(1)] Fee payable for verification and Stamping of Weights and Measures and Weighing and Measuring Instruments 1- (a) Bullion Weights: Denomination Fee per piece (Rs.) (1) (2) 10 Kg. 60.00 5 Kg. 40.00 2 Kg. 40.00 1 Kg. 40.00 500 g. 30.00 200 g. 30.00 100 g. 30.00 50 g. 30.00 10 g. 30.00 5 g. 30.00 2 g. 30.00 1 g. 30.00 500mg to 1mg 30.00 (b) Carat Weights: 100g (500 c) 40.00 40g (200 c) 40.00 20g (100 c) 40.00 10g (50 c) 40.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1335 4g (20 c) 40.00 2g (10 c) 40.00 1g (5 c) 40.00 400mg (2 c) 40.00 200mg (1 c) 40.00 100mg (0.5 c) 40.00 40mg (0.02 c) 40.00 20mg (0.01 c) 40.00 4mg (0.02 c) 40.00 2mg (0.01 c) 40.00 1mg (0.005 c) 40.00 (c) Cylindrical knob type Weights: Denomination Fee per piece (Rs.) (1) (2) 10 kg. 40.00 5 Kg. 40.00 2 Kg. 30.00 1 Kg. 20.00 500 g. 10.00 200 g. 10.00 100 g. 10.00 50 g. 10.00 20 g. 10.00 10 g. 10.00 5 g. 10.00 2 g. 10.00 1 g. 10.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1336 (d) Sheet metal Weights (other than Bullion) Denomination Fee per piece (Rs.) (1) (2) 500 mg. 10.00 200 mg. 10.00 100 mg. 10.00 50 mg. 10.00 20 mg. 10.00 10 mg. 10.00 5. mg. 10.00 2 mg. 10.00 1 mg. 10.00 (e) Iron hexagonal, knob type weights and parallelepiped Weights: Denomination Fee per piece (Rs.) (1) (2) 50 kg. 50.00 20 Kg. 40.00 10 Kg. 40.00 5 Kg. 40.00 2 Kg. 30.00 1 Kg. 20.00 500 g. 10.00 200 g. 10.00 100 g. 10.00 50 g. 10.00 20 g. 10.00 10 g. 10.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1337 5 g. 10.00 2 g. 10.00 1 g. 10.00 (e) Standard weights for testing of high capacity weighing machines: Denominations Fee corresponding to Fee corresponding to Max Max permissible relative permissible relative error error 0.5/10000 in Rs. 3.3/10000, 1.7/10000 and 1.0/10000 in Rs. 100 Kg 75.00 50.00 200 Kg 150.00 100.00 500 Kg 300.00 200.00 1000 Kg 750.00 500.00 2000 Kg 1500.00 1000.00 5000 Kg 3000.00 2000.00 2- Capacity Measures: Denomination Fee per piece (Rs.) (1) (2) 100 litre and above Rs.50 for the Ist 100 litre plus Rs.7 for every additional 100 litre or part thereof subject to maximum of Rs.5000. 501 100.00 201 40.00 101 40.00 51 20.00 21 20.00 11 20.00 500 ml 20.00 200 ml 20.00 100 ml 20.00 50 ml 20.00 20 ml 20.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1338 10 ml 20.00 5 ml 20.00 2 ml 20.00 1 ml 20.00 3- Length Measures: (a) Non-Flexible – Denomination Fee per piece (Rs.) (1) (2) 2 m. 20.00 1 m. 20.00 0.5 m. 40.00 1 m. graduated (at every cm) 40.00 0.5 m. graduated (at every cm) 40.00 (b) Fabric Plastic / Woven / Steel tapes - Accuracy Class Fee per metre in Rs. (1) (2) Class-I 2.00 Class-II 2.00 Class-III 1.00 (c) Folding Scales – Denomination Fee per piece (Rs.) (1) (2) 1 m. 20.00 0.5 m. 20.00 (d) Surveying Chain – Denomination Fee per piece (Rs.) (1) (2) 30 m. 200.00 20 m. 200.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1339 4- Beam Scale Class A & B. Denomination Fee per piece (Rs.) (1) (2) 200 Kg. 800.00 100 Kg. 600.00 50 Kg. 300.00 20 Kg. 300.00 10 Kg. 300.00 5 Kg. 200.00 2 Kg. 200.00 1 Kg. 200.00 500 g and below 120.00 5- Beam Scales Class C&D: Denomination Fee per piece (Rs.) (1) (2) 1000 Kg. 400.00 500 Kg. 400.00 300 Kg. 400.00 200 Kg. 200.00 100 Kg. 200.00 50 Kg. 40.00 20 Kg. 40.00 10 Kg. 40.00 5 Kg. 30.00 2 Kg. 30.00 1 Kg. 30.00 500 g and below 20.00 6- Non-Automatic Weighing Instruments – Mechanical (analogue) Class III and IV: 400 t 4000.00 300 t 3000.00 200 t 3000.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1340 150 t 2000.00 100 t 2000.00 80 t 2000.00 60 t 2000.00 50 t 2000.00 40 t 2000.00 30 t 2000.00 25 t 2000.00 20 t 2000.00 15 t 2000.00 10 t 1000.00 5 t 500.00 3 t 400.00 2 t 400.00 1500 Kg 300.00 1000 Kg 300.00 500 Kg 300.00 300 Kg 200.00 250 Kg 200.00 200Kg 100.00 150 Kg 100.00 100 Kg 100.00 50 Kg 100.00 30 Kg 100.00 25 Kg 60.00 20 Kg 60.00 15 Kg 30.00 10 Kg 30.00 5 Kg 30.00 3 Kg 30.00 2 Kg 30.00 1 Kg 30.00 500g and below 15.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1341 7- Non-Automatic Weighing Instruments – Electronic Class III and IV: 400 t 4000.00 300 t 3000.00 200 t 3000.00 150 t 2000.00 100 t 2000.00 80 t 2000.00 60 t 2000.00 50 t 2000.00 40 t 2000.00 30 t 2000.00 25 t 2000.00 20 t 2000.00 15 t 2000.00 10 t 1000.00 5 t 1000.00 3 t 500.00 2 t 500.00 1500 kg 250.00 1000 kg 250.00 500 kg 250.00 300 kg 200.00 250 kg 200.00 150 kg 200.00 100 kg 200.00 50 kg 200.00 30 kg 200.00 25 kg 200.00 20 kg 100.00 15 kg 100.00 10 kg 100.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1342 5 kg 100.00 3 kg 100.00 2 kg 100.00 1 kg 100.00 500gm and below 100.00 8- Non Automatic Weighing instruments both mechanical and electronics Class I and II. Capacity Fee (Rs.) Exceeding 50 t 3000.00 Not exceed 50t but exceed 10t 2000.00 Not exceed 10 t but exceed 1t 1000.00 Not exceed 1t but exceed 50 kg 500.00 Not exceed 50 kg but exceed 10 kg 250.00 Not exceed 10 kg 200.00 9- Automatic Weighing Instrument: Capacity Fee (Rs.) Exceeding 100 t 4000.00 Not exceed 100t but exceed 50t 3000.00 Not exceed 50t but exceed 10t 2000.00 Not exceed 10 t but exceed 1t 1000.00 Not exceed 1t but exceed 50 kg 500.00 Not exceed 50 kg but exceed 10 kg 250.00 Not exceed 10 kg 200.00 10- Volumetric measuring instruments: (a) Dispensing pumps each pump : Rs. 1000.00 per unit (b) Totalizing counter : Rs. 500.00 per unit (c) Other instruments : PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1343 Capacity Fee in Rs. Exceeding 100 litre Rs. 500 for the Ist 100 litres plus Rs.250 for every additional 100 litre or part thereof No exceeding 100 litre but exceeding 500.00 50 litre Not exceeding 50 litre but exceeding 250.00 20 litre Not exceed 20 litre 200.00 11- Flow metres: Flow rate up to 100 litre/min. Rs. 2000.00 Above 100 litre/min. upto 500 litre/min. Rs. 3000.00 Above 500 litre / min. Rs. 5000.00 12- Linear Measuring Instruments: Taxi, Autorikshaw metres Rs.100.00 Other metres Rs.50 for the Ist 1000 m. or part there of plus Rs.5.00 for every additional 100 m. or part thereof 13- Clinical Theremometer Rs. 1.00 per unit 14- Water meter Rs. 25.00 per unit 15- Peg Measure: 30 ml 50.00 60 ml 50.00 100 ml 50.00 16. CNG Dispensers: Rs.3000.00 per unit 17. LPG Dispensers: Rs.3000.00 per unit 18. Counter Machine: Upto capacity 10 Kg. 60.00 Above 10 Kg. 100.00 PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1344 SCHEDULE – XVIII [See rule 16)] Form of appeal against an order of a Legal Metrology Officer / Controller Legal Metrology:- 1- Name and address of the appellant 2- No. and date of order of Legal Metrology Officer / Controller of Legal Metrology against which the appeal is preferred. 3- Whether the appellant desires to be heard in person or through an authorized representative. 4- Grounds of appeal PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1345 SCHEDULE – XIX [See rule 17] Compounding fees for various offences Sr. Name of offence Section Penal Compounding fee No. Section Individual/HUF Company Prop/Firm/ Director of Partner of firm/ Company Society/Director Government/ of Society/ Local Trust/Trustee Authority. 1 Use of weight, measure S .8(3) 25 2500-00 15000-00 or numeration other than the Standard weight, measure or numeration 2 Manufacture of weight or S. 8(4) 27 2000-00 15000-00 measure not conforming to Standards 3 Transaction or dealing or S. 10 28 2000-00 5000-00 contract in respect of goods etc. by weight, measure or number otherwise than prescribed. 4 Quote or make announce- S. 11 29 2000-00 5000-00 ment or issue or exhibit of price list or charging of price otherwise than in accordance with standard unit of weight or measure or numeration. 5 Demanding or receiving S. 12 30 5000-00 10000-00 any articles or thing or service in excess or less than the quantity specified by contract or agreement. PUNJAB GOVT. GAZ. (EXTRA), NOVEMBER 13, 2013 (KRTK 22, 1935 SAKA) 1346 6 Maintenance of records, S. 17 31 2000-00 5000-00 registers by manufacturer, dealer or repairer and production of weight, measure document, register on demand 7 Compliance of declaration S. 18(1) 36(1) 2500-00 15000-00 in respect of pre- packaged commodity by manufactured/ dealer 8 Compliance of net quantity – S. 18(1) 36(2) 10000-00 20000-00 requirement of pre-packaged commodity by manufacturer 9 Manufacturer of weight or S. 23 45 5000-00 20000-00 measure without license 10 Repair / sale of weight or S. 23 46 2000-00 5000-00 measure without license 11 Use of unverified weight S. 24 33 2000-00 5000-00 or measure in transaction or protection 12 Sale of weight or measure S. 33 33 3000-00 5000-00 without verification 13 Sale or delivery of S. 34 34 2000-00 5000-00 commodities by non standards weight or measure 14 Rendering service by non S. 35 35 2000-00 5000-00 standard weight or measure 15 Tampering with license S. 47 . 47 5000-00 15000-00 16 Provision of any rule made S. 53(3) . 53(3) 2000-00 5000-00 under the Act D.S. GREWAL, Secretary to Government of Punjab, Department of Food, Civil Supplies and Consumer Affairs. 0360/11-2013/Pb. Govt. Press, S.A.S. Nagar ·-" GOVf. ( IAZ. (EXTRA), APRIL 9. 2014 (CHTR 19, 1936 SAKA) GOVERNMENT OF PUNJAB fENT OF FOOD, CIVIL SUPPLI ES AND CO SUMER AFFAIRS NOTI"FICATION The 4th April, 2014 465 _ ' G:S..R.n/C.A.l/2010/S.53/Amd.(l)/2014 .-With reference to the ~ ofPnoj ab, Department of Food, Civil Supplies and Consumer ~~No. G. S. R. 59/C.A .I/2010/S.53/2013 dated the 28th ~13 and in exercise of the powers conferred by section 53 of the l.c§!IJI6:Glrology Act,2009 (Central Act No. I of 20 I 0), and all other powers ~g · in this behalf, the Governor ofPunjab, after due consultation with dte·Gnll\:cmmeot of India, is pleased to make an amendment in the Punjab ~ Mdrology (Enforcement) Rules, 2013 , namely: - RULES L ( 0 These rules may be called the Punjab Le g al Metro logy (Enforcement) (First Amendment) Rules, 2014 . (2) They shall come into force on and w ith effect from the date of their p!!bl ication in the Official Gazette. ~ - - - 2. In the "Punjab Legal Metrology (Enforcement) Rules,20 13 (here in after referred mas the said rules), in rule 3, in sub-rule (4 ), in the proviso for the word "f ee"' the words "additional fee at half the rates" shall be substituted 3 lntbesaid rules after rule 17, the following rule shall be added, namely <>1 8 Repeal and saving :-The Punjab Weights and Measures (Enforcemen t) Ru les, 1993, are hereby repeal ed. Provided that any orde r issued or any action taken under the said rules shall be deemed to have been issued or taken under the corresponding prov is ions ofthese rules" 4 In the said rules, in Schedule XVII , in item 3, in sub items (b), for the existing column (2), the following column shall be substituted, namely: "Fee per meter in Rs (2) 1.00 1.00 0.50" D.S. GREWAL, Secretary to Government of Punjab, Department of Food, Civil Supplies and Consumer Affairs, 473104-2014/Pb. Govt. Press, S.A.S. Nagar PUNJAB GOVT. GAZ. (EXTRA), SEPTEMBER 9, 2014 889 (BHDR 18, 1936 SAKA) PART III GOVERNMENT OF PUNJAB DEPARTMENT OF FOOD, CIVIL SUPPLIES AND CONSUMER AFFAIRS NOTIFICATION The 2nd September, 2014 No.G.S.R.45/C.A.l/201 O/S.53/ Amd.(2)/2014.- With reference to Government of Punjab, Department of Food, Civil Supplies and Consumer Affairs, Notification No. GSR.40/C.A.J/20 I O/S .53 /Amd./20 14 dated 8th July, 2014, and in exercise of the powers conferred by section 53 of the Legal Metrology Act, 2009 (Central Act I of 20 I 0), and all other powers enabling him in this behalf, after consultation with the Central Government, the Governor of Punjab is pleased to make the following rules, namely:- RULES I. (I) These rules may be called the Punjab Legal Metrology (Enforcement) Second Amendment Rules , 2014. (2) They shall come into force on and with effect from the date of their publication in the Official Gazette. 2. In the Punjab Legal Metrology (Enforcement) Rules, 2014, in Schedule XVII, in item 3, for the existing sub-item (b), the following sub­ item shall be substituted namely:- "(b) Fabric Plastic/Woven /Steel tapes- Size of measuring tapes Fee (in rupees) Up to 5 meter 0.50 Above 5 meter and up to I 0 meter 1.00 Above I 0 meter and up to 50 meter 5.00 Above 50 meter and up to I 00 meter 10.00 Above I 00 meter and up to 200 meter 20.00." . D.S. GREWAL, Secretary to Government of Punjab, Department of Food, Civil Supplies and Consumer Affairs. 583109-2014/Pb. Govr. Press, S.A.S. Nagar 208 PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) PART I] Regd. No. NW/CH-22 Regd. No. CHD/0092/2018-2020 Published by Authority No. 17] CHANDIGARH, FRIDAY, APRIL 24, 2020 (VAISAKHA 4, 1942 SAKA) CONTENTS Pages PART I—Punjab Government Notifications and Orders .. 209-221 PART I-A—Notifications by Local Government .. Nil PART I-B—Notifications by Commissioners and Deputy Commissioners .. Nil PART II—Statutory Notifications and Republications from Gazette of India/Punjab .. Nil PART III—Notification by High Court, Labour Commissioner ; Advertisements ; .. Nil Director of Lotteries, Punjab and Notices etc. PART III-A—Notifications by Universities .. Nil PART III-B—Court Notices .. Nil PART IV—Acts and Bills .. Nil PART V—Notification by Punjab State Legislature .. Nil SUPPLEMENT PART I—Statistical .. Nil SUPPLEMENT PART II—General .. Nil LEGISLATIVE SUPPLEMENT—Contents .. Nil Ditto PART I—Acts .. Nil Ditto PART II—Ordinances .. Nil Ditto PART III—Delegated Legislation .. Nil Ditto PART IV—Correction slips, Republications and Replacements .. Nil PART I] PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) 209Regd. No. NW/CH-22 Regd. No. CHD/0092/2018-2020 Published by Authority No. 17 ] CHANDIGARH, FRIDAY, APRIL 24, 2020 (VAISAKHA 4, 1942 SAKA) PART I Punjab Government Notifications and Orders ( 209 ) GOVERNMENT OF PUNJAB DEPARTMENT OF FOOD, CIVIL SUPPLIES AND CONSUMER AFFAIRS (CPA Branch) NOTIFICATION The 19th March, 2020 No.5/9/2017-5CPA/227.-With reference to the Government of Punjab, Department of Food, Civil Supplies and Consumer Affairs, Notification. No. 5/9/2017-5CPA/51, dated the 18th November, 2019 and in exercise of the powers conferred by section 53 of the Legal Metrology Act, 2009 (Central Act No.1 of 2010), and all other powers enabling him in this behalf, the Governor of Punjab after consultation with the Central Government is pleased to make the following rules further to amend the Punjab Legal Metrology (Enforcement) Rules, 2013, namely:- RULES 1. (1) These rules may be called the Punjab Legal Metrology (Enforcement) (Amendment) Rules, 2020 (2) They shall come into force on and with effect from the date of publication of this notification on the official Gazette. 2. In the Punjab Legal Metrology (Enforcement) Rules, 2013, (hereinafter referred to as the said rules), in rule 3,- (A) in sub rule (1), for the words “him in this behalf”, the words and sign “him in this behalf, along with fee as specified in Schedule X,” shall be substituted; (B) for sub rule (2), the following sub-rules shall be substituted, namely; “(2) (i) On receipt of application for grant of license under sub-rule (1) in the form as specified in Schedule IV, V and VI, it shall be examined by the Controller and if it is found to be in order, the Controller shall issue a license to the applicant of manufacturer, repairer or dealer, as the case may be, in form as specified in Schedule VII, VIII and IX, respectively. (ii) In case the license issued under sub-rule 2 (i) is required to be amended on following grounds, namely:- 210 PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) PART I] (a) Change in the name and address of the firm;or (b) change in the proprietors, partners and change in the name of company’s Director, as the case may be; or (c) change in weight and measures; or (d) the licensee intends to get a duplicate license issued; or (e) any other reason, such licensee, shall make an application to the Controller specifying the reasons for the proposed amendment or a duplicate license, as the case may be, respectively.”; and (C) for sub-rule (7), the following sub-rule shall be substituted, namely:- “(7) Every Manufacturer, Dealer and Repairer licensed under this rule shall furnish a security deposit to the Government as specified in the Schedule –XV." 3. In the said Rules, in Rule 9, in sub-rule (2),- (i) for the words "rupees one hundred", the words “rupees two hundred and fifty” shall be substituted; and (ii) In the first proviso, for the sign, letters and figures “@ Rs. 3000/-”, the words “at the rate of four thousand and five hundred rupees” shall be substituted . 4. In the said Rules, for Rule 17, the following Rule shall be substituted, namely:- “17. Fee for compounding of offences. The fee for compounding of an offence under the said Act, shall be such as specified in Schedule-XIX , for respective category of offenders, subject however, to the maximum fine as specified under the relevant provisions of the Act, under which such offence falls.” 5. In the said Rules for the existing Schedules X, XV, XVII and XIX, the following Schedules shall, respectively, be substituted, namely :- “Schedule– X [ Rule 3(1), (2), (3) & (4) ] License and renewal fees for manufacturers, repairers and dealers of weights and measures Serial No. Name of License Fee per year(in rupees) 1 2 3 1 Manufacturers 10,000.00 2 Repairers 4,000.00 3 Dealers 2,000.00 Schedule –XV [See rule 3(7)] Security to be deposited by existing/ new license issued to Manufacturer, Dealer and Repairer of Weights and Measures Serial No. License Security Deposit (in rupees) 1 2 3 1 Manufacturer License 15,000.00 2 Repairer License 7,500.00 3 Dealer License 5,000.00 PART I] PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) 211 Schedule-XVII [ See rule 9(1) ] Fee payable for verification and stamping of weights and Measures and weighing and Measuring Instruments 1. (A) Bullion Weights Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 10 kg 60.00 2 5 kg 40.00 3 2 kg 40.00 4 1 kg 40.00 5 500 g 30.00 6 200 g 30.00 7 100 g 30.00 8 50 g 30.00 9 20 g 30.00 10 10 g 30.00 11 5 g 30.00 12 2 g 30.00 13 1 g 30.00 14 500 mg 30.00 15 200 mg 30.00 16 100 mg 30.00 17 50 mg 30.00 18 20 mg 30.00 19 10 mg 30.00 20 5 mg 30.00 21 2 mg 30.00 22 1 mg 30.00 (B) Carat Weights Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 100 g (500 c) 40.00 2 40 g (200 c) 40.00 3 20 g (100 c) 40.00 4 10 g (50 c) 40.00 212 PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) PART I] 5 4 g (20 c) 40.00 6 2 g (10 c) 40.00 7 1 g (5 c) 40.00 8 400 mg (2 c) 40.00 9 200 mg (1 c) 40.00 10 100 mg (0.5 c) 40.00 11 40 mg (0.2 c) 40.00 12 20 mg (0.1 c) 40.00 13 10 mg (0.05 c) 40.00 14 4 mg (0.02 c) 40.00 15 2 mg (0.01 c) 40.00 16 1 mg (0.005 c) 40.00 (C) Cylindrical Knob Type Weights Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 10 kg 40.00 2 5 kg 40.00 3 2 kg 30.00 4 1 kg 20.00 5 500 g 10.00 6 200 g 10.00 7 100 g 10.00 8 50 g 10.00 9 20 g 10.00 10 10 g 10.00 11 5 g 10.00 12 2 g 10.00 13 1 g 10.00 (D) Sheet Metal Weights (other than Bullion) Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 500 mg 10.00 2 200 mg 10.00 3 100 mg 10.00 4 50 mg 10.00 PART I] PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) 213 5 20 mg 10.00 6 10 mg 10.00 7 5 mg 10.00 8 2 mg 10.00 9 1 mg 10.00 (E) Iron hexagonal, knob type weights and parallelepiped weights Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 50 kg 50.00 2 20 kg 40.00 3 10 kg 40.00 4 5 kg 40.00 5 2 kg 30.00 6 1 kg 20.00 7 500 g 10.00 8 200 g 10.00 9 100 g 10.00 10 50 g 10.00 11 20 g 10.00 12 10 g 10.00 13 5 g 10.00 14 2 g 10.00 15 1 g 10.00 (F) Standard Weights for testing of high capacity Weighing Machines Serial No. Denominations Fee Corresponding Fee corresponding to to Max permissible Max relative error 0.5/10000 permissible relative (In rupees) error 3.3/10000,1.7/10000 & 1.0/10000 (in rupees) (1) (2) (3) (4) 1 100 kg 75.00 50.00 2 200 kg 150.00 100.00 3 500 kg 300.00 200.00 4 1000 kg 750.00 500.00 214 PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) PART I] 5 2000 kg 1500.00 1000.00 6 5000 kg 3000.00 2000.00 2. Capacity Measures Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 100 litre and above 200 for the 1st 100 litre plus 12 for every additional 100 litre or part thereof subject to maximum of 5000. 2 50 L 100.00 3 20 L 40.00 4 10 L 40.00 5 5 L 20.00 6 2 L 20.00 7 1 L 20.00 8 500 ml 20.00 9 200 ml 20.00 10 100 ml 20.00 11 50 ml 20.00 12 20 ml 20.00 13 10 ml 20.00 14 5 ml 20.00 15 2 ml 20.00 16 1 ml 20.00 3. Length Measures: (A) Non-Flexible Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 2 m 20.00 2 1 m 20.00 3 0.5 m 20.00 4 1 m graduated (at every cm) 40.00 5 0.5 m graduated (at every cm) 40.00 (B) Fabric Plastic/Woven/Steel tapes Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 Up to 5 m 1.00 2 Above 5 m and up to 10 m 2.00 3 Above 10 m and up to 15 m 3.00 PART I] PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) 215 4 Above 15 m and up to 30 m 6.00 5 Above 30 m and up to 50 m 10.00 6 Above 50 m and up to 100 m 20.00 7 Above 100 m and up to 200 m 40.00 (C) Folding Scales Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 1 m 20.00 2 0.5 m 20.00 (D) Surveying Chain Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 30 m 200.00 2 20 m 200.00 4. Beam Scale Class A & B. Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 200 kg 800.00 2 100 kg 600.00 3 50 kg 300.00 4 20 kg 300.00 5 10 kg 300.00 6 5 kg 200.00 7 2 kg 200.00 8 1 kg 200.00 9 500g and below 120.00 5. Beam Scale Class C & D Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 1000 kg 400.00 2 500 kg 400.00 3 300 kg 400.00 4 200 kg 200.00 5 100 kg 200.00 216 PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) PART I] 6 50 kg 40.00 7 20 kg 40.00 8 10 kg 40.00 9 5 kg 30.00 10 2 kg 30.00 11 1 kg 30.00 12 500 g and below 20.00 6. Non automatic Weighing Instruments- Analogue(Mechanical) Class III and IV Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 Above 300 t up to 400 t 6000.00 2 Above 150 t up to 300 t 4500.00 3 Above 10 t up to 150 t 3000.00 4 Above 5 t up to 10 t 1500.00 5 Above 3 t up to 5 t 750.00 6 Above 1500 kg up to 3 t 600.00 7 Above 300 kg up to 1500 kg 450.00 8 Above 200 kg up to 300 kg 300.00 9 Above 25 kg up to 200 kg 150.00 10 Above 15 kg up to 25 kg 100.00 11 Above 500 g up to 15 kg 50.00 12 Up to 500 g 25.00 7. Non-automatic Weighing Instruments (Digital) Class III and IV Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 Above 300 t up to 400 t 6000.00 2 Above 150 t up to 300 t 4500.00 3 Above 10 t up to 150 t 3000.00 4 Above 3 t up to10 t 1500.00 5 Above 1500 kg up to 3 t 750.00 6 Above 300 kg up to 1500 kg 400.00 7 Above 20 kg up to 300 kg 300.00 8 Up to 20 kg 150.00 PART I] PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) 217 8. Non-automatic Weighing Instruments- both Analogue(Mechanical) and Digital (Electronic) Class I and II . Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 Above 50 t 4500.00 2 Above 10 t up to 50 t 3000.00 3 Above 1 t up to 10 t 1500.00 4 Above 50 kg up to 1 t 750.00 5 Above 10 kg up to 50 kg 400.00 6 Up to 10 kg 300.00 9. (A) Automatic Weighing Instrument Serial No. Denomination Fee per piece (in rupees) (1) (2) (3) 1 Above 100 t 6000.00 2 Above 50 t up to 100 t 4500.00 3 Above 10 t up to 50 t 3000.00 4 Above 1 t up to 10 t 1500.00 5 Above 50 kg up to 1 t 750.00 6 Above 10 kg up to 50 kg 400.00 7 Up to 10 kg 300.00 (B) Automatic Rail weighbridge: Rs 5000.00 for each load receptor Rs 5000.00 for totalizing device (C) Automatic Instrument for Weighing Road Vehicles in Motion Rs 5000.00 for each load receptor 10. Volumetric measuring instruments A Dispensing pumps each pump with Rs 2250.00 per unit totalizing counter Additional Totalizing counter Rs 750.00 per unit B Other instruments Exceeding 100 litre Rs 750.00 for the 1st 100 litre plus Rs. 350.00 for every additional 100 litre or part thereof per unit Not exceeding 100 litre but exceeding 50 litre Rs 750.00 per unit Not exceeding 50 litre but exceeding 20 litre Rs 400.00 per unit Not exceeding 20 litre Rs 300.00 per unit 218 PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) PART I] 11. Flow Metres Flow rate up to 100 litre/min. Rs 3000.00 per unit Above 100 litre/min up to 500 litre/min Rs 4500.00 per unit Above 500 litre/min Rs 7500.00 per unit 12. Linear Measuring Instruments Taximeters , Auto rickshaw meters Rs 150.00 per unit Other meters Rs 75.00 for the 1st 1000 m or part thereof plus Rs. 7.50 for every additional 100 m, or part thereof per unit 13. Clinical Thermometer Clinical thermometer Mercury in glass Rs 5.00 per unit Digital type Rs 10.00 per unit 14. Water Meter (Domestic Type) Rs 40.00 per unit 15. Peg Measure Capacity 30 ml , 60 ml, 100 ml Rs. 75.00 per unit 16. CNG Dispensers Dispenser Rs. 5000.00 per nozzle Totalizer Rs. 1000.00 per totalizing unit 17. LPG Dispensers Dispenser Rs. 5000.00 per nozzle Totalizer Rs. 1000.00 per totalizing unit 18. Counter Machine Serial No. Capacity Fee per unit(in rupees) 1 Up to 10 kg 100.00 2 Above 10 kg 150.00 19- Blood Pressures Measuring Instrument: Rs 20.00 per unit. SCHEDULE – XIX [See rule 17] Compounding fee for various offences Sr. Name of offence Section Penal Compounding fee No. Section (in rupees) Individual or HUF or Company or Director of Prop or Firm or Partner of Company or Government firm or Society or Director of or Local Authority Society or Trust or Trustee 1 Use of weight, measure 8(3) 25 5000.00 25000.00 PART I] PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) 219 or numeration other than the Standard weight, measure or numeration 2 Manufacture of weight 8(4) 27 10000.00 20000.00 or measure not conforming to Standards 3 Transaction or dealing 10 28 5000.00 10000.00 or contract in respect of goods etc. by weight, measure or number otherwise than prescribed. 4 Quote or make 11 29 5000.00 10000.00 announcement or issue or exhibit of price list or charging of price otherwise than in accordance with standard unit of weight or measure or numeration. 5 Demanding or receiving 12 30 5000.00 10000.00 any articles or thing or service in excess or less than the quantity specified by contract or agreement. 6 Maintenance of records, 15(2), 31 3000.00 5000.00 registers by 17 manufacturer, dealer or repairer and production of weight, measure document, register on demand 7 Manufacturer of weight 23 45 10000.00 20000.00 or measure without license 8 Repair / sale of weight 23 46 3000.00 5000.00 or measure without license 220 PUNJAB GOVT. GAZ., APRIL 24, 2020 (VYSK 4, 1941 SAKA) PART I] 9 Use of unverified weight 24(1) 33 2000.00 10000.00 or measure in transaction or protection 10 Sale of weight or 33 33 2000.00 10000.00 measure without verification 11 Sale or delivery of 34 34 3000.00 5000.00 commodities by non-standards weight or measure 12 Rendering service by 35 35 3000.00 5000.00 non-standard weight or measure 13 Tampering with license 47 47 10000.00 20000.00 14 Provision of any rule 53(3) 53(3) 3000.00 5000.00 made under the Act Note : Compounding fee for offences relating to Packaged Commodities falling under section 18 read with sub-section (1) and (2) of section 36 and section 29 of the Legal Metrology Act, 2009, shall be as prescribed under the Legal Metrology Packaged Commodities Rules 2011. Sd/- K.A.P SINHA, Principal Secretary to Government of Punjab, Chandigarh Department of Food, Civil Supplies The 12th March, 2020 and Consumer Affairs. 2008/4-2020/Pb. Govt. Press, S.A.S. Nagar

Previous and next

All provisions of Punjab Legal Metrology (Enforcement) Rules 2013 with amendments

Questions people ask

Is form LD-3 of Punjab Legal Metrology (Enforcement) Rules 2013 with amendments still in force?

No repeal of Punjab Legal Metrology (Enforcement) Rules 2013 with amendments is recorded.