LawGrids logoLAWGRIDS.ORG

Form LD-3, Gujarat Legal Metrology (Enforcement) Rules, 2011: FORM LD-3

Gujarat Legal Metrology (Enforcement) Rules, 2011 - Form LD-3

Text of form LD-3

FORM LD-3

FORM LD-3 OFFICE OF THE CONTROLLER OF LEGAL METROLOGY, GUJARAT STATE Licence to a dealer in weights, measures, weighing or measuring instruments, Licence No___...-...... ta The Controller of Legal metrology hereby grants lO ...,...-....-0.2-2eeeeeneeeees (Name and address of party or parties) a licence to deal in the following:- 343-39 (Include details of the weights, measures, weighting instruments or measuring instruments). Weights _ Measures Weighing Instruments | Measuring instruments The licence is valid for the party named above in respect of his premises located at Address of branch office if any: ee ee ee Re ee ees Die dicerne is Vale TR cccgeeccrecawe RS peexccccaneesseae Details of employees Sr. | Nameof | Joining | Birth | Education Designation Monthly | EPF | Remarks No. | Employee | Date date | Qualification — Salary | No. | 2 3 4A | 5 6 < 8 9 | _ La The dealer shall comply with the conditions noted below. If he fails to comply with anyone of these, his licence is liable to be cancelled, (Seal) ENS este reageneeee Plates (Signature) Controller of legal Metrology Gujarat State Note: In the case of firm, its name with the names of all names of all persons having interest in the business should be given in paragraph 1. 33-40 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A CONDITIONS OF LICENCE 1. The person in whose favour this licence is issued shall. - {a} Comply with all the relevant provisions of the Act and Rules for the time being in force; (b) Not encourage or countenance any infringement of the provisions of the Act. or the Rules amended from time to time: (c) Exhibit this licence im some conspicuous part of the premises to which it relates; (d) Comply with any general or special directions that may be given by the Controller of legal metrology; (¢) Surrender the licence in the event of closure of business and/ or cancellation of Licence: (f) Present the weights, measures, weighing or measuring instruments as the case may be manufactured and meant for use within the State, to the legal metrology officer for verification and stamping before sale; (2) Submit the application for renewal of this licence as required under the rules within thirty days of expiry of the validity of the licence. 2. Every condition prescribed after the issue of this licence shall if notified in the Official Gazette, be binding on the persons to whom the licence has been granted. Renewal entries Current Nowesci2iiseens Date scien Gurtent Bosscccasccncs Date enc. Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology Current: N@scscacecivacaress Date ...cccs05. Cairent Nos ecu edabeosniscs Renewed for Renewed for Seal Seal Controller Controller of Legal Metrology of Legal Metrology Current Now.......0..0.060. Date .......... Current NO............e006 Date cca aceesas Renewed for Renewed for Seal Seal | Controller Controller of Legal Metrology || of Legal Metrology PART IV-A] , GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-41 SCHEDULE IV (See rule Ii (4) and 11 (3)) Office of Controller of Legal Metrology, Gujarat State Licencing and renewal fees for manufacturers of, or repairers of, or dealers in weights and measures Issue of licence / renewal of licence to: Fee per year (i) Manufacturers Rs. 500/- (11) Repairers Rs. 100/- (111) Dealers Rs. 100/- SCHEDULE V - (See rule I (6)) Office of Controller of Legal Metrology, Gujarat State Register of licenced Manufacturers/ Repairers’ Dealers of weights, measures, weighing / measuring instruments CHOOT tHe Ln. lene ed : — Ju cq — -—, rs To — = a mam oO a = 2 |¢% a 2 | & 8 Seles | 3 = = re -_ = = ow rs rai a = Ee a) Pr eS — 2 i a =F 2 4 Pye a = a i | = a = = tee o| “ D 2 oie | Seat tendered = a = a aS = haw! o Su a a 2 op Go oa) = ~~ Sw Es a = ao D o £ oom me] = o o ooo 5 r= oD cL 2 2 ae = a/ of a o Pe =| oe = 2] 2 =o = “a A 3 = oo 5 3 es an o = = = o Z| & 4/838) 2.4 a ee ee | ee | ay pee eae ea! = = = Qo oss go moa 5 oO wo Og a = oF a 8) Go| 5| 8e8|/ FR | 8S | 23) pSl2 | 2S] 23] 22) e i Se s| 2s eek ow! Fe] Ss fee Tete | S| s8| 2) 85s5| 22 |2ey Bs 82/2 | Bs) 28 8) BS] E Pies ed la oo oo pie a = = BR oo LF ogo} a oO S| Eel Ole Se ela e@ |aaeeee | os) ng) ase) a S| me | ut 3 4 4 6 7 & 9 10 i 12 13 Note: Column (5) does not apply to dealers; column (7) does not apply to repairers and dealers. 33-42 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A SCHEDULE ¥I1 See rule iis) Office of Controller of Legal Metrology, Gujarat State Security deposit to be made by licencee repairer Repairer of weights and measures including weighing Rs, 5000.00 and measuring instruments. I) 2) 4) 5(a) 5(b) 5(c) 3(d) 3(e) a(f) SCHEDULE VIA (See rule LE(LL)) BASIC MINIMUM REQUIREMENTS FOR LICENCE HOLDERS The workshop of the repairer shall not be in a residential premises. The workshop should be having minimum 50 sq.m. areas and shall be preferably located on the ground floor or the basement. However, workshop will be permitted above ground floor if lifi is provided in working condition in the building, The present licensee repairers shall comply with this provision within a time frame of 12 months from the date of notification of this Rules. Minimum experience required : ‘The owner / partner in the repairer licence for repairing electronic balance class-11] _ and class-IV (load cell based technology) may be a diploma holder in Electronic / Electrical / Instrumentation Engineering in a government recognized institute. The skilled workers employed by him shall be holding Government recognized ITI electronic / electrical / instrumentation trade certificate. The owner / partner in the repairer licence for repairing electronic balance class-I and class-IT (magnet based technology) may be a diploma holder in Electrome / Electrical / Instrumentation Engineering in a government recognized institule. The skilled workers employed by him shall be holding Government recognized ITI electronic / electrical / instrumentation trade certificate. Also skilled workers having experience of more than | year as Service Engineer / Service Technician in the manufacturing company of such magnet based electronic balances will be preferable. However, in case the owner/partner does not have the prescribe dqualifications, an employee having such qualifications may be employed. All skilled workers of the licence holder will be issued a photo ID by the licence holder and hotographs will also be affixed in the licence itself. Only such authorised skilled workers can present the weights and measures to the concerned Legal Metrology Officer for verification and stamping. The equipments and machineries required for repairing mechanical weighing instruments shall be as per TABLE-A The equipments and machineries required for repairing electronic weighing instruments shall be as per TABLE-B All licencee repairers shall be required to keep loan sets as per TABLE-C for repairing of mechanical weighing instruments. All licencee repairers shall be required to keep loan sets as per TABLE-D for repairing of electronic weighing instruments. All licencee repairers shall be required to keep test weights and measures as per TABLE-E. All licencee manufacturers shall be required to keep tools and accessories as per TABLE-F in their production workshop, PART IV-A] * GUIARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-43 TABLE-A UIPMENTS AND MACHINERIES REQUIRED FOR REPAIRING MECHANICAL WEIGHING INSTRUMENTS SR. NO. " PARTICULARS SIZE NOS. — SET l VISE 75 mm - ; 1 no. 100 mm | no. 7 2 SCISSOR. - 75 mm 7 | no. 100 mm L no, 3 SPANNER SET 410 12 mm 1 no. - 4 PLIER | 38 mm me 1 no. 5 FIX PLIER Medium 1 no. 6 ROUND FILE a 3mm if a 12 mm I no. t HALF ROUND FILE / smm 3 To! 12 mm 1 no. 8 | FLAT FILE 7 4mm | I no. 12 mm 1 no. 9 DISMISS (SCREW DRIVER) i 1 set 10 | BLOWSTOVE A 1No. II FLAT PUNCH | 10 to 38 mm i | set 7 no. 12 ROUND PUNCH - For 1 kg to 20 gram and for | 1 set 7 no. Th bullion weight and scale 13 / RECTANGULAR PUNCH For 5 keto 50 kilogram set 4 nos. 14 |NUMBERPUNCH-ENGLISH | 0109 1 set 19 nos. 15 HINDI TYPE For Kilogram and for series of | 1 no, each oram 16 | MELTING POT FOR MELTING OF | Medium 1 No. LEAD 17 | HACKSAW WITH BLADE ~ | 300 mm 1 No. 18 | EMERY STONE 300mm 1 No. 19 | WIRE BRUSH | | 2No. 0 ENGLISH LETTERS (A.B,C.D,| AtoZ CAPITAL ic 4 TYPE SET) PUNCH SET atoz SMALL. I set 21 HAND DRILL WITH SPANNER LA No. | 22 HA MMERS 200 | eram, 200 gram, 100 | 4 Nos. gram, 50 gram 2B LADLE SO 1 No. 24 |JACK FOR WEIGHBRIDGE| 1 No. PLATFORM ; 33-44 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A TABLE-B LIST OF EQUIPMENTS AND MACHINERIES REQUIRED FOR REPAIRING ELECTRONIC WEIGHING INSTRUMENTS (1) DIGITAL MULTI METER (2) SOLDERING IRON (3) DESOLDERING GUN (4) SOLDERING WIRE (5) NUMBER PUNCH SET - 0 to 9 (6) | NOSE PLIER AND PLIER (7) SCREW DRIVER SET (8) ALLEN KEY (9) DRILL MACHINE (10) | FLAT AND ROUND FILE SET (11) BULLION WEIGHT BULLION FROM 1 KILOGRAM to 1 MILLIGRAM (12) C.l. WEIGHTS — 20 KILOGRAM, 10 KILOGRAM, 5 KILOGRAM, 2 KILOGRAM to 500 GRAM (13) HAMMER SET (14) CUTTER (13) SPANNER SET (16) LEAD SEAL (SQUARE) (17) SEAL WIRE (8) ABCD TYPE SET (CAPITAL SET-1, SMALL SET-1) PUNCHES PART IV-A] =: GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-45 TABLE-C LIST OF EQUIPMENTS FOR ALL LICENSED REPATRERS SHALL BE REQUIRED TO KEEP LOAN SETS FOR REPAIRING OF MECHANICAL WEIGHING INSTRUMENTS. (a) LICENCE FOR GUJARAT STATE (1) SCALE-—C CLASS 100 KILOGRAM 1 NO 50 KILOGRAM | NO. 20 KILOGRAM | NO. 10 KILOGRAM I NO, 5 KILOGRAM 3 NOS. ? KILOGRAM 4 NOS. 1 KILOGRAM 4 NOS. TOTAL ; 15 SET (2) WEIGHTS 500 GRAM 15 NOS, 200 GRAM 15 NOS 10 KILOGRAM 15 NOS § KILOGRAM 15 NOS. 20 KILOGRAM 15 NOS. TOTAL 75 NOS. (3) CONICAL MEASURE 2 LITRE | NO. 1 LITRE | NO. 500 MILLILITRE I NO. 200 MILLILITRE | NO. 100 MILLILITRE 1 NO, TOTAL 5 NOS. (4) DIPPING MEASURE 2 LITRE 1 NO. | LITRE 1 NO, 500 MILLILITRE LNO, 200 MILLILITRE 1 NO, 100 MILLILITRE | NO. 50 MILLILITRE | NO. 20 MILLILITRE 1 NO, TOTAL 7 NOS. (5) CLOTH METER | NO, (6) COUNTER MACHINE 2 KILOGRAM 5 NOS, 5 KILOGRAM 3 NOS. 33-46 (B) GUIARAT GOVERNMENT GAZETTE, EX,, 31-03-2011 LICENCE FOR A DISTRICT : (1) SCALE —C CLASS (2) WEIGHTS (3) METER ie} (4) CONICAL MEASURE (5) DIPPING MEASURE (6) COUNTER BALANCE C7} BULLION WEIGHTS ($) SCALE B CLASS 20 KILOGRAM 10 KILOGRAM 5 KILOGRAM | NO. 2 KILOGRAM I NO. 1] KILOGRAM 1 NO. TOTAL 20 KILOGRAM 10 KILOGRAM 5 KILOGRAM I NO, 2 KILOGRAM TO 50 GRAM WEIGHTS TOTAL CLOTH METER 1 LITRE NO. | 300 MILLILITRE 200 MILLILITRE 100 MILLILITRE TOTAL 1 LITRE 300 MILLILITRE 200 MILLILITRE 100 MILLILITRE TOTAL 2 KILOGRAM 3 NOS. 5 KILOGRAM 2 NOS. TOTAL 1 KILOGRAM TO [PART IV-A | NO. 1 NO, 5 NOS. | NO. I NO. 5 SETS 10 NOS. NO.1 NO.1 NO.] NO. 4 NOS. NO.1 NO.1 NO.1 NO] 4 NOS. 3 NOS. [MILLIGRAM —2 SET. 5 KILOGRAM 1 NO, | KILOGRAM 2 NOS. 500 GRAM 100 GRAM _ TABLE-D 2 NOS. 2 NOS. LIST OF EQUIPMENTS FOR ALL LICENSED REPATRERS SHALL BE REQUIRED TO KEEP LOAN SETS FOR REPAIRING OF ELECTRONIC WEIGHING INSTRUMENTS. (1) (2) (3) (4) (3) (6) 300 GRAM / 10 MILLIGRAM 5 KILOGRAM / 500 MILLIGRAM lO KILOGRAM / | GRAM 30 KILOGRAM / 2 GRAM 30 KILOGRAM 35 GRAM 30) KILOGRAM / 3 GRAM REPAIRER HAS TO KEEP MINIMUM OF ONE ELECTRONIC BALANCE EACH OF ABOVE AS LOAN SET. PART IV-A] | GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-47 TABLE-E LIST OF EQUIPMENTS FOR ALL LICENSED REPAIRERS SHALL BE REQUIRED TO KEEP TEST WEIGHTS AND MEASURES (1) ELECTRONIC BALANCES FOR WEIGHT TESTING : (1) 200 GRAM/ 1 MILLIGRAM (2) 2KILOGRAM/ 10 MILLIGRAM (3) 20KILOGRAM/ 100 MILLIGRAM (4) 50 KILOGRAM /1GRAM (2) WEIGHTS FOR TESTING OF ELECTRONIC BALANCE 20 KILOGRAM 4NO8. 10 KILOGRAM 2 NOS. 5S KILOGRAM - 2 NOS. 2 KILOGRAM 2 NOS. | KILOGRAM 2 NOS. 500 GRAM TO 1 GRAM 2 SET (3) 2? KILOGRAM TO 20 MILLIGRAM BULLION WEIGHTS — ONE SET (4) METER CLOTH METER (3) CONICAL MEASURE 10 LITRE NO.1 5 LITRE © NO.1 2 LITRE NO.1 1 LITRE NO.1 500 MILLILITRE NOL1 200 MILLILITRE NO! 100 MILLILITRE NO. (6) DIPPING MEASURE 2 LITRE NO.I 1 LITRE NO. 1 500 MILLILITRE NO. 200 MILLILITRE NO. 100 MILLILITRE NOI 50 MILLILITRE NO.1 20 MILLILITRE NO.1 33-48 GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 [PART IV-A TABLE-F LIST OF TOOLS AND ACCESSORIES FOR THAT ALL THE LICENCEE MANUFACTURER SHALL BE REQUIRED IN THEIR PRODUCTION WORKSHOP. (1) PORTABLE DRILL MACHINE (2) BENCH TYPE DRILL MACHINE (3) WELDING MACHINE (4) PORTABLE DISC GRINDER (5) BENCH GRINDER (6) GAS CUTTING SET WITH PUG MACHINE (7) MAGNET DRILL FOR WEIGHBRIDGE MANUFACTURING (8) DIGITAL MULTI COLOUR (9) SOLDERING IRON (10) DESOLDERINGGUN (11) SOLDERING WIRE (22) NUMBER PUNCH SET AND ABCD PUNCH SET (13) NOSE PLIER AND PLIER (i4) SET OF SCREW DRIVER (15) ALLEN KEY SET (16) DRILL MACHINE SPANNER SET (17) FLAT AND ROUND FILE SET (18) BULLION WEIGHT ~2kg TO 1 mg (19) CL WEIGHTS — 20 KILOGRAM, 10 KILOGRAM, 5 KILOGRAM, 2 KILOGRAM TO 50 GRAM SET (20) HAMMER SET (21). CUTTER (22) SPANNER SET (23) LID SHEEL (SQUARE) (24) SEAL WIRE (25) WEIGHBRIDGE MANUFACTURER WILL HAVE TO FACILITATE OVERHEAD CRANE FOR MORE THAN 5 TON CAPACITY WEIGHBRIDGE (26) TESTING WEIGHTS SHALL BE OF MINIMUM 1/4TH CAPACITY OF THE MAXIMUM CAPACITY OF WEIGHBRIDGE TO BE MANUFACTURED. PART IV-A] | GUJARAT GOVERNMENT GAZETTE, EX., 31-03-2011 33-49 SCHEDULE VII (See rule £3)

Previous and next

All provisions of Gujarat Legal Metrology (Enforcement) Rules, 2011

Questions people ask

Is form LD-3 of Gujarat Legal Metrology (Enforcement) Rules, 2011 still in force?

No repeal of Gujarat Legal Metrology (Enforcement) Rules, 2011 is recorded.