Rule 10, The Chandigarh Legal Metrology (Enforcement) Rules, 2011: Use of weights only or measures only or number only in certain cases
The Chandigarh Legal Metrology (Enforcement) Rules, 2011 - Rule 10
Text of rule 10
Use of weights only or measures only or number only in certain cases
10. Use of weights only or measures only or number only in certain
cases. - Except in the cases of commodities specified in Schedule I, the
declaration of quantity in every transaction, dealing or contract, or for
protection shall be terms of the unit of -
(a) weight, if the commodity is solid, semi-solid, viscous or a
mixture of solid and liquid;
(b) length, if the commodity is sold by linear measure;
(c) area, if the commodity is sold by area measure;
(d) volume, if the commodity is liquid or is sold by cubic measure;
or
(e) number, if the commodity is sold by number.
11. Licencing of manufacturer, repairer and dealer of Weights and
Measures -
(1) Every manufacturer or repairer of, or dealer in, 'veight or
measure shall make an application for the issue of a licence to the
Controller Legal Metrology or such other officer as may be
authorized by him in this behalf, in the appropriate form set out in
Schedule II-A.
Provided that no licence to repair shall be required by a
manufacturer to repair weight or measure manufactured by him and used
in a State other than the State of manufacture of the :)dn12, but the
manufacturer has to inform in advance the concerned L.egal Metrology
Officer about the repairing.
(2) Every manufacturer or repairer of, or dealer in weight or measure shall
make an application for the renewal of a licence within thirty days before
the expiry of validity of the licence to the Controller Legal Metrology or
such other officer as may be authorized by him in this behalf, in the
appropriate form set out in Schedule II-B.
(3) Every licence issued to a manufacturer, repairer or dealer shall be in
the appropriate form set out in Schedule III.
(4) Every licence issued to a manufacturer, repairer, or dealer shall be
valid for a minimum period of one calendar year and may be renewed for
a period of one to five years ,by the Controller or such other officer as
may be authorized by him in this behalf on payment of necessary fee as
specified in the Schedule IV.
(5) The fee payable for the alteration of a licence or for the issue of a
duplicate licence shall be one half of the licence fee as specified in
Schedule IV.
Provided that an additional fee at full the rates specified in Schedule IV
shall be paya.ble by the applicant if he is permitted by the Controller to
make an application for the renewal of a licence within a period of three
months from the date of expiry of the licence.
(6) The Controller or such other officer as may be authorized by him in
this behalf shall maintain a register of licenced manufacturers, dealers and
repairers in the form set out in Schedule V.
(7) Every manufacturer / repairer / dealer licenced under the Act and
these Rules shall maintain such workshop / equipments / tools/ registers
etc. as the case may be, as per the terms and conditions of the licence.
(8). Every repairer licenced under the Act and these Rules snail furnish a
security deposit for each licence to the State Government as specified in
Schedule VI.
3
,
(9) Every license issued or renewed under this Act shall be displayed in a
conspicuous place in the premises where the licencee carries on business.
(10) A licence issued or renewed under this Act shall not be saleable nor
transferable.
12. Suspension and cancellation of licence granted:
(1) The Controller or such other officer authorized by him in this behalf
may, if he has any reasonable cause to believe that the holder of any
licence issued, renewed or continued under this Act has made any
statement in, or in relation to, any application for the issue, renewal or
continuance of the licence, which is incorrect or false in any material
particular or has contravened any provision of the Act or any Rules or
order made there under, suspend such licence, pending the completion of
any inquiry against the holder of such licence:
Provided that no such licence shall be suspended unless the holder
thereof has been given a reasonable opportunity of showing cause against
the proposed action:
Provided further that where the inquiry referred to in this sub-rule
is not completed within a period of three months from the date of
suspension of a licence, such suspension shall, on the expiry of the period
aforesaid, stand vacated.
(2) The Controller or such other officer authorized by him in this behalf
may, if he is satisfied, after making such inquiry as he may think fit, that
the holder of a licence has made a false or incorrect statement of the
nature referred to in sub-rule (1), or has contravened any law or order
referred to in that sub-rule, cancel such licence:
Provided that no such licence shall be cancelled unless the holder
thereof has been given a reasonable opportunity of shovving cause against
the proposed action.
(3) Every person whose licence has been suspended shail, immediately
after such suspension, stop functioning as such licencee and shall not
resume business as such licencee until the order of such suspension has
been, or stands, vacated.
(4) Every licencee whose licence has been suspended or cancelled shall,
after such suspension or cancellation, as the case may be, surrender such
licence to the authority by which such licence was issued.
(5) Every licencee whose licence has been cancelled shall, ,vitrin a period
of thirty days from the date of such cancellation, or within su'.=h further
period, not exceeding three months from such date, as the Controller or
such other officer authorized by him in this behalf may, on sufficient cause
being shown, allow, dispose of the weights or measures which were in his
possession, custody or control on the date of such cancellation and in the
event of his failure to do so, the Controller or any other officer authorized
by him, in writing, in this behalf, may seize and dispose Of the same and
distribute the proceeds thereof in such manner as may be prescribed.
13. Records to be maintained by manufacturers, etc - Every
manufacturer or repairer of, or dealer in weight or measure licer,ced under
the Act and these Rules shall maintain records and registers in the
appropriate form set out in Schedule VII and also submit such periodical
report / returns as may be specified.
14. Periodical interval for the verification of weights or measures shall be such
as may be prescribed under the Legal Metrology (General) Rules, 2011.
15. Verification and inspection of weights or measures -
(1) Every person using any weight or measure in any transaction or for
protection shall present such weight or measure for verification / re
verification, at the office of the Legal Metrology Officer or at such other
place as the Legal Metrology Officer may specify in this behalf on or
before the date on which the verification falls due;
Provided that where any weight or measure is such that it cannot, or
should not be moved from its location, the person using such weight or
measure shall report to the Legal Metrology Officer at least thirty days in
advance of the date on which the verification falls due.
(2) Where any weight or measure is such that it cannot, or should not, be
moved from it's location, Legal Metrology Officer shall take necessary
steps for the verification of such weight or measure at the place of its
location.
(3) For the verification of weight or measure referred to in sub-rule (2)
the user shall proVide such facilities as may be specified by the Controller.
(4) Every weight or measure presented for verification shall be complete
in itself.
(5) Every weight or measure shall be verified in a clean condition, and if
necessary, the Legal Metrology Officer shall require the owner or user to
make necessary arrangement for the purpose.
(6) A Legal Metrology Officer may visit, as frequently as possible during
the period specified in Rule 14, every premise within the local limits of his
jurisdiction to inspect and test any weight or measure which is being or is
intended or likely to be used in any transaction or for protection.
(7) The Legal Metrology Officer shall obliterate the stamp on any weight
or measure, if it is found during inspection that:-
(a) Any weight or measure which being due for re-verification has not
been submitted for such re-verification.
(b) Any weight or measure which does not conform to the Standards
established by or under the Act.
Provided that where the Legal Metrology Officer is of opinion that the
defect or error in such weight or measure is not such as to require
immediate obliteration of the stamp, he shall inform the user, of the
defect or error found in the weight or measure and call upon user to
remove the defect or error within such time, not exceeding e:ght days and
shall-
(i) if user fails to remove the defect or error within that period, obliterate
the stamp, or
(ii) if the defect or error is so removed as to make the weight or measure
conform to the standards established by or under the Act, verify and
stamp such weight or measure.
Explanation: The obliteration of the stamp on any weight or measure shall
not take, away or abridge the power of the Legnl Metrology Officer to
seize such weight or measure in accordance with the Provisions of the Act.
16. Stamping of weights or measures - (1) The Legal Metrology Officer
shall stamp every weight or measure, if after testing and verification, he is
satisfied that such weight or measure conforms to the standards
established by or under the Act, with a stamp of uniform design, issued by
. the Controller, which shall indicate the number allotted for adrninistrative
purpose to the Legal Metrology Officer by whom it is stamped.
Provided that if by reason of the size or nature of any weight or
measure it is not desirable or practicable to put a stamp thereon, the
Legal Metrology Officer shall take such action as may be directecJ by the
Controller by a general or a special order in writing.
(2) The Legal Metrology Officer shall also mark the year and its quarter of
stamping on every verified weight or measure except when the size or
nature of such weight or measure makes it impracticable.
Explanation - A year shall be deemed to consist of four quarters of which
first quarter shall be of the months of January, February and March which
shall be marked as A; second quarter shall be of the months of April, May
and June which shall be marked as 6, third quarter shall be of the months
of July, August and September which shall be marked as C and fourth
quarter shall be of the months of October, November and December
which shall be marked as D.
(3) On completion of verification and stamping the Legal ~1etrology Officer
shall issue a certificate of verification in the form set out in Schedule VIII.
(4) Where a certificate of verification is lost or destroyed, the holder of the
certificate of verification shall forthwith apply to the Legal Metrology
Officer who had issued the certificate, for the issue of a duplicate
certificate, of verification. Every such application for the issue of a
duplicate certificate shall be accompanied by a fee of rupees ten.
(5) On receipt of an application under sub-rule (4), the Legal Metrology
Officer shall issue to the applicant a duplicate copy of the certificate of
verification marked 'DUPLICATE'.
17. Fee for verification - (1) Fees payable for verification and stamping of
weight or measure at the office or camp office of the Legal Metrology
Officer shall be as specified in Schedule IX.
(2) If, at the request of the user of weight or measure, verification is
done at any premises other than the office or camp office of the Legal
Metrology Officer, an additional fee shall be charged at half the rate
specified in the Schedule IX and the user of the v!eight 0:- :;;e3sure shall
pay the expenses incurred by the Legal Metrology Officer for visiting the
premises including the cost of transporting and handling the Working
Standard and other eqUipment subject to a minimum of rupees one
hundred.
Provided that no additional fee shall be charged for verification and
stamping of weights and measures in situ of,-
(i) vehicle tanks for petroleum products and other liquicls, Meter for
Liquids Other than Water (Fuel Dispenser, Liquid Petroleum Gas, Milk
Dispensers), Compressed Natural Gas Dispensers, Non-3utomatic
Weighing Instruments like weighbridges, platform machines, crane scale,
Automatic Gravimetric Filling Instruments, Automatic Rail-weighbridge,
Discontinuous Totalizing Automatic Weighing Instruments, and such other
weight or measure which cannot, and should not be moved from its
location;
(ii) Weight or measure in the premises of manufacturer or oealer of such
weight or measure.
(3) If a weight or measure is presented to the Legal Metrology Officer for
re-verification after expiry of the validity of the stamp, an additional fee at
half the rates specified in Schedule IX shall be payable for every quarter
of the year or part thereof.
(4) Full fee shall be payable for re-stamping any weight or r1lea:~ure held
in stock with manufacturer or dealer within the period specif:cd, :n rule 14
from the date on which it was last stamped, provided that the original
stamp was not obliterated
(5) A weight or measure which on verification/inspection is found to be
incorrect shall be returned to the person concerned for adjustment
informing him, in a proforma specified by the Controller: of the defects
found in the weight or measure, and calling upon him to rel.'ove the
defects within a period not exceeding seven days. When the necessary
adjustment has been carried out, such weight or measure shall be verified
6
-
on payment of the fees specified in schedule IX and if found correct shall
be stamped.
18. Collection of fees and deposit into the Treasury - (1) Before
commencing the work of verification or re-verification, the Legal Metrology
Officer shall inform the person concerned of the fees payable by him and
shall receive the same in the manner as authorized by the Controller and
issue a receipt on the form approved by the Controller, one copy of such
receipt being kept on record.
Provided that fees payable by a department of the Central or State
Government under these rules may be realized in such manner as may be
directed by the Controller.
(2) The Legal Metrology Officer shall maintain a register, in the form
approved by the Controller, which shall be written up from day··to-day and
shall show the amount of fees and other charges collected during the day.
(3) All payment received by the Legal Metrology Officer during the week
shall be paid into the Government Treasury under the appropriate "Head
of Account" on such dates or days as may be specified by the Controller
from time to time, and a receipt thereof be obtained and an intimation to
that effect be sent to the Controller or other officer authorized by him in
this behalf.
Previous and next
All provisions of The Chandigarh Legal Metrology (Enforcement) Rules, 2011
Questions people ask
Is rule 10 of the Chandigarh Legal Metrology (Enforcement) Rules, 2011 still in force?
No repeal of the Chandigarh Legal Metrology (Enforcement) Rules, 2011 is recorded.