Rule 2, The Haryana Legal Metrology (Enforcement) Rules, 2011: (1) In these rules, unless the context otherwise requires,
The Haryana Legal Metrology (Enforcement) Rules, 2011 - Rule 2
Text of rule 2
(1) In these rules, unless the context otherwise requires,
2. (1) In these rules, unless the context otherwise requires, — Definitions. |
(a) “Act” means the Legal Metrology Act, 2009 (Central Act | of
2010) ;
(b) “Reference Standards Laboratory” means a laboratory set up
by the Central Government where reference standards, |
secondary standards and working standards are maintained;
(c) “Schedule” means a schedule appended to these rules;
(d) “State Government” means the Government of the State of
Haryana in the Administrative Department.
(2) Words and expressions used in these rules and not defined but
defined in the Act shall have the meanings respectively assigned to them in the
Act.
3. Except in the cases of commodities specified in Schedule I, the Use of weights or
measure or
declaration of quantity in every transaction, dealing or contract, or for protection jumber in certain
shall be terms of the unit of— cases.
section 10. |
(a) weight, if the commodity is solid, semi-solid, viscous or a mixture
of solid and liquid ;
4 |
il
|
[
426 HARYANA GOVT. GAZ. (EXTRA.), MAY 12, 2011
(VYSK, 22, 1933 SAKA)
(b) length, if the commodity is sold by linear measure;
(c) area, if the commodity is sold by area measure;
(d) volume, if the commodity is liquid or is sold by cubic measure; or
(e) number, if the commodity is sold by number.
Licencing of 4. (1) Every manufacturer, repairer or dealer shall make an application
umes st for the issue of a licence to the Controller legal metrology in schedule-II, III or IV
repairer and
dake as the case may be :
ee Provided that no licence to repair shall be required by a manufacturer
to repair weight or measure manufactured by him and used in a State other than
the State of manufacture of the same, but the manufacturer has to inform in advance
the concerned legal metrology officer about the repairing.
(2) Every manufacturer, repairer or dealer shall make an application
for the renewal of a licence within thirty days before the expiry of validity of the
licence to the Controller legal metrology in Schedule V, VI or VII, as the case may
be :
Provided that an additional fee at full the rates specified in
Schedule XI shall be payable by the applicant if he is permitted by the Controller
to make an application for the renewal of a licence within a period of three months
from the date of expiry of the licence.
(3) Every licence issued to a manufacturer, repairer or dealer shall be
in the appropriate form set out in Schedule VIII, IX or X, as the case may be.
(4) Every licence issued to a manufacturer, repairer or dealer shall be
valid for a minimum period of one calendar year on payment of fee as specified in
the Schedule XI and may be renewed for a period of one year to maximum of five
years.
(5) The fee payable for the alteration of a licence or for the issue of a
duplicate licence shall be one half of the licence fee as specified in Schedule XI.
(6) The Controller shall maintain a register of licenced manufacturers,
dealers and repairers in the form set out in Schedule XII.
(7) Every manufacturer, repairer or dealer licenced under the Act and
these rules shall maintain such workshop/equipments/tools/registers etc., as the
case may be, as per the terms and conditions of the licence.
(8) Every repairer licenced under the Act and these rules shall furnish
a security deposit for each licence to the State Government as specified in
Schedule XIII.
(9) Every licence issued or renewed under this Act shall be displayed
in a conspicuous place in the premises where the licencee carries on business.
HARYANA GOVT. GAZ. (EXTRA.), MAY 12, 2011 427
(VYSK. 22, 1933 SAKA)
(10) A licence issued or renewed under this Act shall neither be saleable
nor transferable.
§. (1) The Controller, if he has reasonable cause to believe that the holder
of any licence issued, renewed or continued under this Act has made any statement
in, or in relation to, any application for the issue, renewal or continuance of the
licence, which is incorrect or false in any material particular or has contravened
provision of the Act or any rule or order made there under, suspend such
licence :
Provided that no such licence shall be suspended unless the holder
thereof has been given a reasonable opportunity of showing cause against the
proposed action.
(2) The Controller may cause an enquiry to be held before taking final
decision in the matter :
Provided that where the inquiry referred to is not completed within
a period of three months from the date of suspension of a licence, such suspension
shall, on the expiry of the period aforesaid, stand vacated.
(3) The Controller may, if he is satisfied, after making such inquiry, as
he may think fit, that the holder of a licence has made a false or incorrect statement
of the nature referred to in sub-rule (1), or has contravened any law or order
referred to in that sub-section, cancel such licence :
Provided that no such licence shall be cancelled unless the holder
thereof has been given a reasonable opportunity of showing cause against the
proposed action.
(4) Every person whose licence has been suspended or cancelled shall,
immediately after such suspension, stop functioning as such licencee and shall
not resume business as such licencee until the order of such suspension has been,
or stands, vacated.
(5) Every licencee whose licence has been suspended or cancelled
shall, after such suspension or cancellation, as the case may be, surrender such
licence to the authority by which such licence was issued.
(6) Every licencee whose licence has been cancelled shall, within a
period of thirty days from the date of such cancellation, or within such further
period, not exceeding three months from such date, as the Controller may, on
sufficient cause being shown, allow, dispose of the weights or measures which
were in his possession, custody or control on the date of such cancellation and in
the event of his failure to do so, the Controller in writing, in this behalf, may seize
and dispose of the same.
6. Every manufacturer or repairer or dealer licenced under the Act and
these rules shall maintain records and registers in the appropriate form set out in
Schedule XIV, XV or XVI, as the case may be and also submit such periodical
report/returns to the Controller.
Suspension and
cancellation of
licence granted.
section 23.
Records to be
maintained by
manufacturers.
section 17.
Verification and
inspection of
weights or
measures.
section 24.
428 HARYANA GOVT. GAZ. (EXTRA.), MAY 12, 2011
(VYSK. 22, [933 SAKA)
7. (1) Every person usin
protection shail present such we
at the office of the legal metrol
verification falls due :
g any weight or measure in any transaction or for
ight or measure for verification /re-verification,
ogy officer on or before the date on which the
Provided that where any weight or measure is such that it cannot be moved from its location, the Person using such weight or measure shall report to the kc cal metrology officer at least thirty days in advance of the date on which the veri ication falls due. :
(2) Where any weight or measure is such that it cannot, or should not, from it’s location, legal metrology officer shall take necessary steps for ation of such weight or measure at the place of its location.
be moved
the verific
(3) For the verification of weight or measure referred to in sub-rule (2), the user shall provide such facilities as may be specified by the Controller.
4) Every weight or measure presented for verification shall be complete in itself.
(5) Every weight or measure shall
if necessary, the legal metrology officer shal
l.2cessary arrangement for the purpose.
be verified in a clean condition, and
I require the owner or user to make
(6) A legal metrology officer
premise vithin the local limits of his
measure which is being or is intende
p otection.
may visit, as frequently as possible every
jurisdiction to inspect and test any weight or
d or likely to be used in any transaction or for
(7) The legal metrology officer shall obliterate the stamp on any weight or measure, if it is found during inspection that :—
(a) any weight or measure which being due for re-verification has not been submitted for such re- verification; ;
(b) any weight or measure which does not conform to the standards established by or under the Act :
Provided that where the legal metrology officer is of the opinion that the defect or error in such weight or measure is not such as to require immediate obliteration of the stamp, he shall inform the user, of the defect or error found in the weight or measure and call upon user to remove the defect or error within such time, not exceeding eight days and shall—
(i) if user fails to remove the defect or error within that period. obliterate the stamp; or
i
(ii) if the defect or error is so removed as to make the weight or measure conform to the standards established by or under the Act, verify and stamp such weight or measure.
HARYANA GOVT. GAZ. (EXTRA.), MAY 12, 2011 429 (VYSK. 22, 1933 SAKA)
Explanation :—The obliteration of the stamp on any weight or measure shall not take, away or abridge the power of the legal metrology officer to seize such weight or measure.
8. (1) The legal metrology officer shall Stamp every weight or measure, if after inspection and verification, he is satisfied that such weight or measure
Provided that if by reason of the size or nature of any weight or measure it is not desirable or practicable to puta stamp thereon, the legal metrology officer shall take such action, as may be directed by the Controller by a general or 4 special order in writing.
(2) The legai metrology officer shall also mark the year and its quarter of stamping on every verified weight or measure except when the size or nature of such weight or measure makes it impracticable.
(3) On completion of verification and stamping the legal metrology officer shall issue a certificate of verification in the form set out in Schedule XVII.
(5) On receipt of an application under sub-rule (4), the legal metrology officer shall issue to the applicant a duplicate copy of the certificate of verification marked ‘DUPLICATE’.
9. (1) Fees payable for verification and stamping of weight or measure at the office of the Legal Metrology Officer shall be as specified in Schedule XVIII.
the user of the weight or measure shall pay the expenses incurred by the Legal Metrology Officer for Visiting the premises including the cost of transporting and
Stamping of
weights or
measures,
Section 24.
Fee for
verification.
section 24.
Collection of fees
and deposit into
Treasury.
section 24.
430 HARYANA GOVT. GAZ. (EXTRA.), MAY 12, 2011
(VYSK. 22, 1933 SAKA)
handling the Working Standard and other equipment subject to a minimum
of = 100 :
Provided that no additional fee shall be charged for verification
and stamping of weights and measures in situ of —
(i) Vehicle tanks for petroleum products and other liquids, Meter
for Liquids Other than Water (Fuel Dispenser, Liquid Petro-
leum Gas, Milk Dispensers), Compressed Natural Gas Dispens-
ers, Non-automatic Weighing Instruments like weighbridges,
platform machines, crane scale, Automatic Gravimetric Fill-
ing Instruments, Automatic Rail-weighbridge, Discontinuous
Totalizing Automatic Weighing Instruments, and such other
weight or measure which cannot, and should not be moved
from its location;
(ii) Weight or measure in the premises of manufacturer or dealer of
such weight or measure.
(3) If a weight or measure is presented to the legal metrology officer
for re-verification after expiry of the validity of the stamp, an additional fee at
half the rates specified in Schedule XVIII shall be payable for every quarter of the
year or part thereof.
(4) Full fee shall be payable for re-stamping any weight or measure
held in stock with manufacturer or dealer from the date on which it was last
stamped, provided that the original stamp was not obliterated.
(5) A weight or measure which on verification/inspection is found to
be incorrect shall be returned to the person concerned for adjustment informing
him, of the defects found in the weight or measure, and calling upon him to
remove the defects within a period not exceeding eight days. When the necessary
adjustment has been carried out, such weight or measure shall be verified on
payment of the fees specified in Schedule XVIII and if found correct shall be
stamped.
10. (1) Before commencing the work of verification or re-verification, the
legal metrology officer shall inform the person concerned of the fees payable by
him and shall receive the same in the manner as authorized by the controller and
issue a receipt on the form approved by the Controller, one copy of such receipt
being kept on record :
Provided that fees payable by a department of State Government
under these rules may be realized in such manner, as may be directed by the
Controller.
(2) The legal metrology officer shall maintain a register, in the
form approved by the Controller, which shall be written up from day-to-day and
shall show the amount of fees and other charges collected during the day.
HARYANA GOVT. GAZ. (EXTRA.), MAY 12, 2011 431
(VYSK. 22, 1933 SAKA)
(3) All payment received by the legal metrology officer during the
week shall be paid into the Government Treasury under the appropriate “Head of
Account” on such dates or days, as may be specified by the Controller from time
to time, and a receipt thereof be obtained and an intimation to that effect be sent
to the Controller or other officer authorized by him in this behalf.
11. Whoever contravenes any provision of these rules, for the contravention
of which no punishment has been separately provided in the Act, shall be punished
with fine, which may extend to five thousand rupees.
12. (1) Every appeal under the Act and these rules shall be preferred in the
form set out in Schedule XIX, and shall be accompanied by a copy of the order
appealed against.
i
(2) An application for appeal to State Government shall be
accompanied by fee of & 500 and for appeal to Controller shall be accompanied
by fee of & 200 paid either by cash or by affixing court fee stamp for the said
value as the case may be.
13. The fee for compounding of offences committed under the Act shall be
as specified in Schedule XX.
14. The Haryana Standard of Weights and Measures (Enforcement) Rules,
1995, are hereby repealed :
Provided that any order made or action taken under the rules so repealed
shall be deemed to have been made or taken under the corresponding provision of
these rules.
Penalty for
contravention of
rules.
section 53.
Form of appeal.
section 50.
Fee for
compounding
offences.
section 48.
Repeal and
savings.
432 HARYANA GOVT. GAZ. (EXTRA.). MAY 12, 2011
(VYSK. 22. 1933 SAKA)
SCHEDULE -1I
(See Rule 3)
The following commodities shall be sold by weight, measure or number as shown against the commodity.
Sr. Commodity
Whether declaration to No.
be expressed in terms of
Weight, measure or
number or two or more
of them. 1 2
3
I. Aerosol products
weight 2. Acids in liquid form
weight or volume 3. Compressed or liquified gas (but not liquified weight and equivlent petroleum gas)
volume at stated
temperature 4. Butter (incl. peanut butter), cheese, curd, ghee weight 5. Electric cables
length or weight 6. Electric wire
length or weight 7. Fencing wire
length or weight 8. Hair oil, un perfumed
weight or volume 9. Fruits and vegetables
number or weight 10. Furnace oil
weight or volume Il. Linseed oil and other vegetable oils weight or volume 12. Heavy residual fuel oil
weight 13. Industrial diesel fuel
volume 14. Honey, malt extract, golden syrup treacle weight 15. Ice cream and other similar frozen products weight or volume 16. Liquid chemicals
weight or volume 17. Liquid petroleum gas
weight 18. Nails, wood screw
fumber or weight 19. Paint (other than Paste paints or solid paint), varnish and volume varnish stairs, enamels
: 20. Papad
number and weight 21. Paste paint, solid paint
weight 22. Ressogulla, Gulabjamun and other Sweet preparations weight 23. Ready made garments
number and size 24. Sauce, all kinds
weight 25. Tyres and tubes
number 26. Yarn
weight or length of yarn
HARYANA GOVT. GAZ. (EXTRA.), MAY 12. 2011 433
(VYSK. 22, 1933 SAKA)
SCHEDULE -II
[See rule 4(1)]
Form - LM -1
Application form for licence as manufacturer
To,
Sr. Entry
To be filled Comments of the
No.
by the Inspection
applicant Officer
1 2
3 4
i. Name of the manufacturing concern for which svsssrssrysseseesesssereereermnnenesreemnrsrnnnnn
licence is desired.
2. Complete address of the concern. Whether premise -ssssesscsssssessesssssneseessrsnsnneseseecentanenersenenenns
are owned/rented/taken on lease/leave licence, duly
supported by documents.
Date of Establishment of workshop/factory, §——_sss+sssssrsssssesssesseevererrntennnneenrenstersetnnnnnrn
4, Name(s) and address (s) along with their father’s/ — sssssssssessseesnesnsnersseossesnnectsnnsnrennnaseensctansens
husband’s name of proprietor (s) and/or Partners
and Managing Director (s) in the case of Limited
company
5. The date and current registration number of Factory/
Shop/Establishment/ Municipal Trade licence.
6. Nature of manufacturing activities at present.
The type of weights and measures proposed to be
manufactured viz ¢
(i) Weights
(ii) Measures
(iii) Weighing Instruments
(iv) Measuring Instruments with details in each
case.
8. The number of persons employed/proposed to be employed
(i) Skilled
(ii) Semi-skilled
(iii) Unskilled
(iv) Specialist trained in the line
434 HARYANA GOVT. GAZ. (EXTRA.), MAY 12, 2011
(VYSK. 22, 1933 SAKA)
Previous and next
All provisions of The Haryana Legal Metrology (Enforcement) Rules, 2011
Questions people ask
Is rule 2 of the Haryana Legal Metrology (Enforcement) Rules, 2011 still in force?
No repeal of the Haryana Legal Metrology (Enforcement) Rules, 2011 is recorded.