Rule 33, Legal Metrology (National Standards) Rules,2011: Repeal and savings
Legal Metrology (National Standards) Rules,2011 - Rule 33
Text of rule 33
Repeal and savings
33. Repeal and savings.- (1) The Standardsof Weightsand Measures(National
Standards) Rules, 1988 (herein under referred to as the said rules) are hereby
repealed.
Providedthat such repealshall not affect:
(a) the previous operationsof the said rules or anything done or omitted to be
dOrleor suffered therein; or
(b) any right, privilege, obligatIonor liability acquired,accruedor incurred under
the said rules; or
(c) any penalty, forfeiture or punishment incurred in respect of any offence
committed againstthe said rules; or
['lJ7T II--~ 3(ii)J
57
(d) any investigation, legal proceedingsor remedy in respect of any such right,
privilege,obligation, liability, penalty, forfeiture or punishmentas aforesaid.
And any such investigation, legal proceedingsor remedy may be instituted,
continued or enforced and any such penalty, forfeiture or punishmentmay be
imposedas if the said ruleshad not beenrescinded.
(2) Notwithstandingsuchrepealanythingdoneor any action taken or purportedto
have been done or taken including approval of letter, exemption granted, fees
collected, any adjudication, enquiry or investigation commenced, license and
registration of manufacturers, dealers, importers of weights and measures,or
show cause notice, decision,determination, approval, authorisation issued,given
or done under the said rules shall if in force at the commencementof the said
rulescontinue to be in force and haveeffect as if issued,given or done under the
correspondingprovisionsof these rules.
(3) The provisions of these rules shall apply to any application made to the
CentralGovernmentor as the casemay be the State Governmentunder the said
rules for licence, registration of manufacturers, importers, dealers, repairers of
weights and measurespending at the commencementof these rules and to any
proceedingsconsequent thereon and to any registration granted in pursuance
thereof.
(4) Any legal proceeding pending in any court under the said rules at the
commencementof these rulesmay be continuedin that.court as if these ruleshad
not beenframed.
(5) Any appeal preferred to the CentralGovernmentor as the casemay be the
StateGovernmentunder the said rulesand pendingshall be deemedto havebeen
madeunder the correspondingprovisionsof theserules.
58
THE GAZEITE OF INDIA: EXTRAORDINARY [PARTII-SEC. 3(iiH
THE FIRST SCHEDULE
(See rule 12)
Supplementary Units and their symbols
1. Unit of plane angle- The unit of plain angle shall be the radian. (symbol: rad)
The radian is the plane angle between two radii of a circle which cutoff, on the
circumference, an arc equal in length to the radius.
2. Unit of solid-angle- The unit of solid angle shall be the steradian. {S'fIllbol: sr)
The steradian is the solid angle which, having its vertex in the centre of a sphere,
cuts off an area of the surface of the sphere equal to that of a square with sides of
length equal to the radius of the sphere.
THE SECOND SCHEDULE
(See rule 13)
Derived Units and Their Symbols
Part I
Derived Unit in relation to Space and Time
1. Unit of Area: The unit of area shall be the square metre. (Symbol: rrr)
The square metre is the area of a square with sides of one metre each.
2. Unit of Volume: The unit of volume shall be the cubic metre. (Symbol: m3)
I The cubic metre is the volume of a cube with sides of one metre each.
3. Unit of frequency: The unit of frequency shall be the hertz. (Symbol: Hz)
The hertz is the frequency of a periodic phenomenon, the period of which is one
second.
IHz= 1/15.
4. Unit of angular velocity: The unit of angular velocity shall be the radian per
second. (Symbol: rad/s)
The radian per second ~sthe angular velocity of a body, rotating around the fixed
axis, which rotates through one radian in one second, when set in uniform
rotation.
['qJlj 1I-~ 3(ii)]
5. Unit of angular acceleration: The unit of angular acceleration shall be the radian
per second square. (Symbol: rad/s')
The radian per second squared is the angular acceleration of a body, rotating
around the fixed axis, which when set in uniform varying rotation, changes angular
velocity at the rate of one radian per second in one second.
6. Unit of speed and velocity: The unit of speed and velocity shall be the metre per
second. (Symbol: m/s or ms')
* •
* •
The metre per second is the velocity (speed) of a body, in motion which traverse a
distance of one metre in one second when set in uniform motion.
7. Unit of acceleration: The unit of acceleration shall be the metre per second
squared. (Symbol: m/s2 or rns")
The metre per second squared is the acceleration of a body in motion which, when
set in uniformly varying motion, changes its velocity at the rate of one metre per
second in one second.
8. Unit of rotational frequency: The unit of rotational frequency shall be the
second raised to the power minus one. (Symbol: s')
The second raised to the power minus one is the rotational frequency of a uniform
rotatory movement which produces one complete revolution in one second.
9. Unit of wave number: The unit of wave number shall be the metre raised to the
power minus one. (Symbol: rn')
The metre raised to the power minus one is the number of waves of a
monochromatic radiation which can be accommodated, in the direction of its
propagation, in a length equal to one metre.
10. Unit of vergency of optical system: The unit of vergency of optical system shall
be the metre raised to the power minus one. (Symbol: rn')
The metre raised to the power minus one is the vergency of an optical system,the
focal distance of which is one metre in a medium having refractive index of unit.
THE GAZE'fTE Of INDIA: EXTRAORDINARY
IPAln II . SEC. 3(ii)1
=
Note 1: This unit is also called 'per metre' or 'dioptre'.
Note 2: The metre raised to the power minus one symbol mol is the unit of wave
number as well as that of vergency of optical system. The context in which the
said unit is used will indicate whether the unit relates to the wave number or
vergency of optical system.
PART II
Derived Units in Relation of Mechanics
1. Unit Qf density and mass density - The unit of densitY..and mass
density shall be the kilogram per cubic metre. (Symbol: kg/m3 or Kgm·3)
The kilogram per cubic metre is the density or mass density of a
homogenous body having a mass of one kilogram and a volume of one
cubic metre.
2. Unit of concentration - The unit of concentration shall be the kilogram
per cubic metre (Symbol: kg/m3 or Kgm.3)
The kilogram per cubic metre is the concentration of a homogenous
solution having a total volume of one cubic metre and containing a •
mass of one kilogram of the given substance
3. Unit of force - The unit of force shall be the newton (Symbol: N)
The newton is the force which gives to a mass of one kilogram an
acceleration of one metre per second squared
1 N = 1 kg. 1m/s"
4. Unit of moment of force - The unit of moment of force shall be the
newton metre.
(Symbol: Nm)
The newton metre is the moment of force produced in a body by a
force of one newton acting at a perpendicular distance of one metre
from the fixed axis around which the body turns
1 N.m = m2 kg s'L
Note: The unit of moment of force shall not be written as joule (J)
because it is Nm.
5. Unit of Pressure - The unit of pressure shall be the Pascal (Symbol:
Pa)
The Pascal is the pressure which, acting on plane surface of one
square metre exerts on that area a total force of one newton
1 Pa = 1 N/m2 or 1 N m·2
6. Unit of tensile strength - The unit of tensile strength shall be Mega
Pascal (Symbol: MPa or M N/m2)
The tensile strength is the highest force, when applied normal to the
cross-section of a test piece which it can Withstand, divided by the
original area of the cross section.
7. Unit of dynamic viscosity - The unit of dynamic viscosity shall be the
Pascal second. (Symbol: Pa.S)
('WT II-~ 3(ij)]
61
The Pascal second is the dynamic viscosity of a homogenous liquid in
which the straight and uniform movement of a plane surface of one
square metre produces a retarding force of one newton, when there is
a velocity difference of one metre per second between two parallel
planes separated by one metre.
1 Pa. s = 1 Pa.1m
1m/s
8. Unit of kinematic viscosity - The unit of kinematic viscosity shall be the
square metre per second.(Symbol: m2/s or m2 s')
The square metre per second is the kinematic viscosity of a liquid
which has a dynamic viscosity of one Pascal second' arid a density of
one kilogram per cubic metre.
1 m2 = 1 Pa.1s
1'S 1kg/m3
9. Unit of surface tension - The unit of surface tension shall be the
newton per metre. (Symbol: N/m).
The newton per metre is the surface tension produced when a force of
one newton acts over a length of one metre on the surface of a liquid
separating that liquid from the material surrounding it.
10. Unit of work, energy and quantify otbeet - The unit of energy, work
and quantity of heat shall be the joule. (Symbol: J)
The joule is the work done when the polnt of application of one newton
moves a distance of one metre in the direction of the force.
1 J = 1 N.1m.
11. Unit of power, radiant flux and heat flux - The unit of power, radiant
flux and heat flux shall be the watt. (Symbol: W)
The watt is the power of an energy system in which one joule of energy
is uniformly transferred in one second.
1W = 1 J/1s.
12. Unit of volume flow - The unit of volume flow shall be cubic metre per
second. (Symbol: m3/s or m3s 1)
The cubic metre per second is the volume delivered by the uniform
discharge of one cubic metre traversing the given cross-section in one
second.
13. Unit of mass flow - The unit of mass flow shall be the kilogram per
second. (Symbol: kg/s or kg.s·1)
The kilogram per second is the mass delivered by the uniform
discharge of a mass of one kilogram traversing the given cross-section
in one second
14 Unit of specific volume - The unit of specific volume shall be the cubic
metre per kilogram. (Symbol: m3/kg)
The cubic metre per kilogram is the specific volume of a homogenous
body having a volume of one cubic metre and a mass of one kilogram
62 THE GAZETfE OF INDIA: EXTRAORDINARY
PART III
Derived Units in Relation to Heat
1. Unitof entropy- The unit of entropy shall be the joule per kelvin.
(Symbol: J/K)
The joule per kelvin is the increase of entropy of a system receiving a
quantity of heat equal to one joule at the constant thermodynamic
temperature of one kelvin, provided that no irreversible change takes
place in the system.
2. Unit of specificentropy - The unit of specific entropy shall be the joule
per kilogram kelvin. [Symbol: JI (kg.K)].
The joule per kilogram kelvin is the specific entropy of a system of
horrfog*enousmass of one kilogram receiving a quantity -of -heat equal
to one joule at the constant thermodynamic temperature of one kelvin,
provided that no irreversible change takes place in the system.
3. Unit of heat capacity - The unit of heat capacity shall be the joule per
kelvin. (Symbol: J/K).
The joule per kelvin is the heat capacity of a homogenous body in
which a quantity of heat equal to one joule produces an increase of one
kelvin in the thermodynamic temperature.
4. Unit of specific heat capacity - The unit of specific heat capacity shall
be the joule per kilogram kelvin. [Symbol: JI (kg.K)].
The joule per kilogram kelvin is the specific heat capacity of a
homogenous body having a mass of one kilogram in which quantity of
heat equal to one joule produces an increase of one kelvin in the
thermodynamic temperature.
5. Unitof latent heat - The unit of latent heat shall be the joule per
kilogram. (Symbol: J/kg)
The joule per kilogram is the heat exchanged by one kg of substance
to change from one phase to another at the temperature of its changing
phase
6. Unit of specific energy - The unit of specific energy shall be the joule
per kilogram. (Symbol: J/kg)
The joule per kilogram is the specific energy of a system of
homogenous mass of one kilogram having the internal energy of one
joule.
7. Unit of thermal conductivity - The unit of thermal conductivity shall be
the watt per metre kelvin. [Symbol: WI (m.K)]
The watt per metre kelvin is the thermal conductivity of a homogenous
body in which a difference of one kelvin in the thermodynamic
temperature produces a radiant flux of one watt between two parallel
planes, each having an area of one square metre, placed one metre
apart.
1W/m.K = 1W/m2
1K11m
['qf1T H-l§q' 3(ii)}
8. Unit of energy densfty - The unit of energy density shall be the joule
per cubic metre. (Symbol: J/m3)
The joule per cubic metre is the energy density of a. system of
homogenous mass of volume one cubic metre and having the radiant
energy of one joule.
9. Unit of heat flux density- The unit of heat flux density shall be the watt
per square metre. (Symbol: W/m2)
The watt per square metre is heat flux density of a surface of one
square metre in area radiating out energy at the rate of one joule per
second.
PART IV
Derived units in relation of Electricity and Magnetism
1. Unit of quantity of electricityand electric charge - The unit of quantity
of electricity and electric charge shall be the coulomb. (Symbol: C).
The coulomb is the quantity of electricity carried in one second by a
current of one ampere.
1C=1A.1s
2. Unit of electric chargedensity- The unit of electric charge density shall
be the coulomb per cubic metre. (Symbol: C/m3)
The coulomb per cubic metre is the electric charge density of a
homogenous mass or system of volume one cubic metre and having a
charge of one coulomb.
3. Unit of electric flux density - The unit of electric flux density shall be
coulomb per square metre. (Symbol: C/m2)
The coulomb per square metre is the electric flux density when a
condenser, having plates of infinite area/size, parallel to each other, is
charged, in vacuum, with a quantity of electricity equal to one coulomb
per one square metre of area of the plates
4. Unit of electric tension, electricpotential and electromollveforce_ The
unit of electric tension, electric potential and electromotive force shall
be the volt. (Symbol: V).
The volt is the potential difference between two points of a condUcting
wire carrying a constant current of one ampere, when the power
dissipated between these paints is equal to one watt.
1V=1W/1A
5. Unit of electric field strength- The unit of electric field strength shall be
the volt per metre. (Symbol: VIm)
The volt per metre is the electric field strength of an electric field which
produces a force equal to one newton in a body charge with a quantity
of electricity equal to one coulomb .
.1Y = 1 N
1m 1C
THE GAZEITE OF INDIA: EXTRAORDINARY
[PART II-SEC. 3(i;)1
6. Unit of electricresistance- The unil of electricreslslance shall be Iheohm.
(Symbol: 0)
The ohm is the electric resistance between two pOints of a conductor
when a constant potential difference of one volt: applied to these
pOints, produces in the conductor a current of one ampere, the
conductor not being the seat of any electromotive force.10 = 1V 11A.
7. Unit of conductance- The unit of conductanceshall be the siemens.(Symbol: S)
The siemens is the conductance of a conductor having a resistance ofone ohm.
1S = 1 0-1 = 1_.0
8. Unit of capacitance- The unit of capacitance shall be the farad.(Symbol: F)
The farad is the capacitance between the conductors of a capacitor
across which there appears a potential differenc~ of one volt when it is
charged by a quantity of electricity of one coulomb.1 F = 1C 11V
9 Unitofpermittivity- The unit of permittivity shall be farad per metre.(Symbol: Fzrn).
The farad per metre is the permittivity of the medium which gives a
capaCitance of one farad per square metre of area of two para"el
prates separated by a distance of one metre.
10. Unit of inductance - The unit of inductance shall be Ihe henry(Symbol: H)
The henry is the inductance of a closed circuit in which an
electromotive force of one volt is produced when the electric current in
the circuit varies uniformly at the rate of one ampere per second.1 H = 1V 1s
1A
11. Unit of permeability- The unit of permeabilityshall be the henry permetre. (Symbol: HIm)
The henry per metre is the permeabilityof a mate"al surroundedby a
single turn of nal sheet conductor inCludingan area of one square
metre and length one metre which gives an inductance of one henry.
12. Unit of magnetic nux and nux of magnetic induction _ The unit of
magnetic flux and flux of magnetic induction shall be the weber.(Symbol: Wb)
The weber is the magnetic nux which, linking a circuil of one turn,
would produce in it an electromotive force of one volt if it were reducedto zero at a uniform rate in one second.
1Wb = 1 V.1s
65
13. Unit of magnetic induction and magnetic flux density - The unit of
magnetic induction and magnetic flux density shall be the tesla.
(Symbol: T)
The tesla is the uniform magnetic induction which, distributed evenly
over a surface of one square metre, produces a total magnetic flux of
one weber while passing over the surface.
1T = 1Wb/1m2
14. Unit of magnetic field strength - The unit of magnetic field strength
shall be the ampere per metre. (Symbol AIm or Am01)
The ampere per metre is the magnetic field strength produced in
vacuum along the surface of a circular cylinder with a circumference of
one metre, by a current of intensity of one ampere, maintained in a
straight conductor of infinite length, of negligibl~ circular cross-section,
which forms the axis of the said cylinder.
15. Unit of current density - The unit of current density shall be the ampere
per square metre. (Symbol: Alm2)
The ampere per square metre is the current density in a linear
conductor when a current of Intensity one ampere flows uniformly
through a cross-section of the conductor equal to one square metre,
perpendicular to the direction of flow of the
current
PARTV
Derived Units in Relation to Electromagnetic Radiation and Light
1. Unit of radiant intensity - The unit of radiant intensity shall be the watt
per steradian. (Symbol: W/sr).
The watt per steradian is the radiant intensity of a point source
uniformly emitting a radiant flux of one watt within a solid angle of one
steradian.
2. Unit of irradiance - The unit of irradiance shall be the watt per square
metre. (Symbol: W/m2)
The watt per square metre is the irradiance produced by a radiant flux
of one watt, distributed uniformly over an element having a surface of
one square metre.
[See also (1) above]
3. Unit of radiance - The unit of radiance shall be the watt per square
metre steradian. (Symbol: W/m2.sr)
The watt per square metre steradian is the radiance of a source
radiating one watt per steradian per square metre of projected area.
4 Unit of luminance - The unit of luminance shalf be the candela per
square metre. (Symbol: cd/m2)
-------------------------------------- -
THE GAZETTE OF INDIA: EXIRJ\OIWINARY
The candela per square metre is the luminance perpendicular to the
plane surface of one square metre of a source, the luminous intensity
of which perpendicular to this source is one candela,
5. Unit of luminous flux - The unit of luminous flux shall be the lumen
(Symbol: 1m)
The lumen is the luminous flux emitted in a solid angle of one steradian
by a uniform point source having a luminous Intensity of one candela.
1 1m= 1 cd. 1 sr
6, Unit of illuminance- The unit of illuminance shall be the lux, (Symbol:
Ix)
~Tae lux is the illuminance produced by a luminous flux of one lumen,
uniformly distributed over a surface of area one square "metre,
1 Ix = 1 1m/1m2
PART VI
Derived Unit in Relation to ionizing Radiations
1, Unit of activity (radioactivity) - The unit of activity (of a radioactive
source) shall be the becqueral (Symbol:Bq)
The becqueral is the activity of a radioactive source in which one
transformation or one transition takes place in one second
1 8q = 1/1.s
2, Unitof absorbeddose - The unit of absorbed dose shall be gray which
is equivalent to one joule per kilogram (Symbol: Gy)
The gray is the dose absorbed in an element of substance of mass one
kilogram to which an energy of one joule is communicated by an
ionizing radiation, having a constant density of radiant flux,
1 Gy = 1 J/1 kg
PART VII
Derived Units in Relation to Physical Chemistry and Molecular
Physics
1. Unit of concentration (of amount of substance) - The unit of
concentration (of amount of substance) shall be the mole per cubic
metre. (Symbol: motrrr')
The mole per cubic metre is the concentration of a homogenous
solution having a total volume of one cubic metre and containing one
mole of the given substance,
2. Unit of molar energy - The unit of molar energy shall be the joule per
mole. (Symbol: J/mol)
The joule per mole is the molar energy of one mole of substance
having the energy of one joule.
['IlJ1l ,,-~ 3(ii)]
67
3. Unit of molar entropy - The unit of molar entropy shall be the joule per
mole kelvin. (Symbol: J/molK)
The joule per mole kelvin is the molar entropy of a system of
homogenous mass having a substance equal to one mole receiving a
quantity of heat equal to one joule at the constant thermodynamic
temperature of one kelvin provided that no irreversible change takes
place in the system.
4. Unit of molar heat capacity - The unit of molar heat capacity shall be
the joule per mole kelvin. (Symbol: J/mol.K)
The joule per mole kelvin is the molar heat capacity of a homogenous
body having an amount of substance equal to one mole, in which a
~ • quantity of heat equal to one joule produces an Jncrease of one kelvin
in the thermodynamic temperature.
THE THIRD SCHEDULE
(See rule 14)
NAMES, MAGNITUDES AND SYMBOLS OF SI PREFIXES
AND PRINCIPLES OF USE OF SI PREFIXES
1. Names, Magnitudes and Symbols of SI Prefixes - The names of
prefixes, their magnitudes and symbols shall be as given in Table 1
Nm fP fi
TABLE 1
th . M l d d S b 1a eso re txes, elf C!IJnI u es an !f_m os
Name of Prefix Magnitude of Prefix S.x_mbolof Prefix
exa 10111 E
~ta 10'" p
tera 10'" T
giga 1011 G -j~a 10° Mkilo 103 k )-
hecta 10" h J.-deca 10 da _Jdeci 10-' d Jcenti 10-': 1 c I.-
Imilli 10-" m10-0--+ imicro J! !nano 10-" n
~~co 10"" _p_
1femto 10-';) f
atto 10-'0 a J
Explanation: The unit of length is metre with symbol m: after adding a
prefix c' for centi we get "ern" as new unit symbol. This can be raised to
a positive exponent 3 to give the unit of volume. Similarly this can be
combined with another unit say 'kg' and by giving it negative exponent
3 to indicate density in kg per crrr'.
68
THE GAZETTE OF INDIA: EXTRAORDINARY
[PARr 1I--Sll. 3(ii)1
Kg/cm3 = kg/ 10-6m3 = 106 kg/m3
Similarly g/cm3 = 1000 kg/m3
2, Symbolhow to be combinedwith units - (a) The symbol of the prefix
shalf be placed before the unit symbolwithout any intermediary spaceor dot.
(b) The combination shall form the symbol of the multiple and submultiple of the
unit
'o.'_' (c) The symbol for the prefix shall be considered to be combined with
the symbol of the unit to which it is directly linked together, forming a
new unit symbol, which can be combined with other unit symbols toform composite unit symbols,
3. Errors how to be avoided - To avoid errors in calculations, all
quantities shall be expressed in SI units, and powers of 10 shall beused,
4. Exponents - An exponent affixed to a symbOl containing a prefix
indicates that the multiple or sub-multiple of the unit is raised to the
power expressed by tlie exponent.
ILLUSTRATION
1 em = 10-2m gives 1 crrr' = 10-6m3 and 1 em:' = 102 rn'
5. Compoundunits how to be formed- Only one prefix shall be used in
forming the multiples of a compound unit, and compound prefixes shallnot be used.
ILLUSTRA TlON
Write nm (nano metre), instead of mum.
6. Use of prefixes with unit mass - Notwithstanding that the base unit of
mass contains a prefix, names of deCimal multiples or sub-multiples of
the unit of mass shall be formed by attaching prefixes to the wordgram
ILLUSTRATION
Write milligram (mg) but not micro kilogram (j.Jkg)
7. Printing:(1) Symbols of units _
(a) Shall be printed in roman (upright) type irrespective of the type usedin the rest of the text;
(b) Shall remain unaltered in the plural;
(c) Shall be written, without a final full stop (periOd) unless the contextotherwise requires; and
(d) shall be placed after the comp~etenumerical value in the expression
for a quantity, leaving a space between the numerical value and theunit.
(2) The symbol for units of weight or measure shall be printed in lower
case letters except that the first letter shall be printed in Upper case
when the name of the unit is derived from a proper name
['WT Il-~ 3(ii)]
ILLUSTRATION
m - metre
s - second
A - Ampere
Wb - weber
8. Multiplication of units - (1) When a compound unit is formed by
multiplication of two or more units, the multiplication may be indicated
in one of the following ways:
m. N, Nrn, Nm
(2) In using a symbol of a unit of weight or measure which coincides
with the symbol for a prefix, special care shall be~ta.ken to avoid
confusion.
ILLUSTRATION
The unit 'newton metre' shall be written Nm or rn.N to avoid confusion
with mN, the millinewton.
9. Division of Units - (1). When a compound is formed by divIding one
unit by another the division shall be indicated in one of the following
ways: -
m/s or by writing the product of m and S·1 as ms'
(2) The letter p shall not be used to denote division.
ILLUSTRA TION
Do not write kmph, write km/h or km.h'
(3) In no case shall more than one solidus (oblique stroke) on the
same line be included in such a combination unless a parenthesis is
inserted to avoid ambiguity:
ILLUSTRATION
Write m/s2 or rn.s" but not m/s/sl
(4) In complicated cases, negative powers or parenthesis shall be
used.
ILLUSTRATION
Write m.kg/(s3.A) or m.kg.s·3A1 but not m.kg/s3A
10. Expression of results - (1) The appropriate integral multiple and sub
multiple to which a unit is to be expressed shall be selected in such a
manner that the numerical value to be expressed is between 0.1 and
1000
ILLUSTRA TlON
1.2 x 104Nmay be written as 12 kN
000394 m may be written as 3.94 mm
1 40 1 Pa may be written as 1401 kPa
3.1 x 1O.8smay be written as 31 ns
(2) In a table of values for the same quantity or in a discussion of such
values within a given context the same integral multiple or sub-multiple
of a unit may be used for all items, even when some of the numerical
values may be outside the range of 0 1 to 1000
(3) For the purpose of expression of dimensions in mechanical
engineering drawings only the millimetre .shall be used.
70
THE GAZETTE OF INDIA: EXTRAORDINARY
4,
IPAin II--SI(, 3(ii)111. Expression of Numbers _
(1) To express numbers in connection with units of weights and
measures, the dot shall be used to separate the integral part of
numbers from the decimal part,
(2) Numbers shall be divided in groups of three starting from the
decimal point in order to faCilitate regarding and neither dots nor
commas shall be inserted in the space between such group ofnumbers,
ILLUSTRA TION
Write 3211 468,02282
Not 3,211.468,022,82
or 3,211,468,022,82
=
THE FOURTH SCHEDULi •
(See rule 15)
Units Permitted to be used with base, Supplementary or Derived
Units
1
Permitted units of time - (1) The permitted units in relation to time shallbe as follows, namely: _ '
(i) the minute, equal to 60 second (Symbol: min),
(ii) the hour, equal to 3600 seconds or 60 minutes (Symbol: h), and
(iii) the day, equal to 86,000 seconds or 24 hours (Symbol: d)
The week, month and year shall correspond to the saka Calendar orthe Gregonan calendar,
2,
Permitted units of plane angle - The permitted units in relation to plane
angle shall be as follows, namely: _
(i) The degree, equal to rr/180 radian (Symbol: 0),
(ii) The minute, equal to rr/l0800 radian or (1/60) 0 (Symbol: ), and
(iii) The second equal to rr/648000 radian or (1/60) (Symbol: ),
3
Permitted unit of volume - (1) The permitted unit of volume shall be
litre (Symbol: I), The litre shall be equal to one thousand part of thecubic metre
1 I = 1 dm:' = 10-3m3
(2) The litre shall not be used for work involving precisemeasurements
Permitted unit of mass - (1) The permitted unit of mass shall be the
tonne (Symbol: t). The tonne shall be equal to 1000 kilograms
(2) Only the prefixes "kilo", "mega", "giga" and "tera" specified in the
Third Schedule may be used with the tonne,
THE FIFTH SCHEDULE
(See Rule 16)
SpeCial Units and their Symbols
1, Speciet unit of energy -The special unit of energy acquired by an
electron shall be the electron volt. (Symbol: eV)
The electron volt is the energy acquired by an electron in paSsing
through a potential difference of one volt in vacuum
1 eV = 1 602 177 33 x 10 19 J
1'qJTf 1I-~ 3(ii)] 71
2. Special unit of atomic mass- The special unit of mass of an atom shall
be unified atomic mass unit. (Symbol u)
The unified atomic mass unit is equal to the fraction 1/12 of the mass of
an atom of the nucleus 12C
1 u = 1.6605402 x 10.27 kg
3. Special units of stellar distance - (1) The first special unit of stellar
distance shall be the astronomical unit. (Symbol: AU)
The astronomical unit of distance is the length of the radius of the
unperturbed circular orbit of a body of negligible mass moving round
the Sun with a sidereal angular velocity of 0.017 202 098 950 radian
per day of 86 400 ephemeris seconds.
1 AU = 149600 x 106 m
Note: The symbol for stellar distance is not internationally uniform, for
example the symbol used for stellar distance is uA in France, Au in
England and AE in Germany.
(2) The second special unit of stellar distance shall be parsec. (Symbol
pc)
The parsec is the distance at which one astronomical unit subtends an
angle of one second of arc.
1 pc = 206265 Au = 30857 X 1012 m.
THE SIXTH SCHEDULE
(See Rule 17)
Temporarily accepted Units
1. Unit of nautical distance - The unit of distance for use in marine and
aerial navigation shall be the nautical mile is equal to a distance of
1852 metres.
2. Unit of nautical velocity - The unit of nautical velocity for use in marine
and aerial navigation shall be the knot. The knot is the velocity equal to
one nautical mile per hour.
1 kont = (1852 13600) m/s, i.e 0514444 rn/s.
3. Unit of wavelength of /ight-(1)The unit of wavelength of light shall be
the angstrom. (Symbol: A) The angstrom is equal to 0.1 nanometre.
1A = 0.1nm = 10·10m
4. Unit of land measurement - (1) The first unit for measurement of land
area shall be the 'are' (Symbol. a)
The 'are' is the area of a square with sides of length 10 metres.
(2) The second unit for measurement of land area shall be hectare
(Symbol: ha) The hectare is the area of a square with sides of length
100 metres.
1 ha = 1hm2 = 104 m2
(3) The prefixes specified in the Third Schedule shall not be used with
the 'are' or hectare.
72
5. Unit of nuclear cross-section-The unit of nuclear crosS-section shall be
the bam. (Symbol: b) The barn is the nuclear crOSS-sectionarea equalto 100 SQuarefemtometres.
1 b = 10-28m2
THE GAZETTEOF INDIA: EXTRAORDINARY
IP,\RI If Su. 3{ii)1
--===---=
6. Unit of pressure of flUid- The unit of pressure of fluid shall be the bar(Symbol: bar)
The bar shall be equal to 100 000 pascals
7.
Unit of standard atmosphere- The unit of Standard atmosphere shallbe 101 325 pascals.
The standard atmosphere is the pressure exerted by air at mean sea
level under the standard conditions -s~ecified by the GeneralConference on Weights and Measures.
8. Special unit for acceleration due to gravity _ The Special unit for
acceleration due to graVity for use in geodesey and geophYSics shallbe the gal. (Symbol: Gal).
The gal is equal to 1/100 metre per second square.
9. Unit of activity of radio-nuclides- The unit of activity of radio-nuclides'shall be the curie. (Symbol Ci)
The curie is the quantity of any radioactive nuclide in which the number
of disintegrations per second is 3.7)( 1010 or
1 Ci = 3.7x 1010Sq
10. Unit of exposure dose - The unit of exposure dose shall be theroentgen. (Symbol: R)
The roentgen ;s the exposure dose of an ionizing radiation which can
produce in a quantity of air having a mass of one kilogram, ions of the
same Sign carrying a total charge 2.58 x 10-4 coulomb, the density of
energy flux being the same throughout the quantity of air taken.R = 2.58x10-4 Clkg
11. Unit of velocity - The unit of velocity shall be kilometre per hour.
(Symbol: kmlh) The kilo~e per hour is the velocity of a bOdy in
motion which When set in a uniform traverses a distance of onekilometre in one hour.
12. Unit of mass of special value - The unit of mass of special value shallbe the caret. (Symbol: c)
The caret is equal to five thOUsandth part of the kilogram It shall be
used for commercial transaCtions in diamonds, pearls and preciousstones ..
tc = 200mg
13. Unit of mass for speCialuse - The unit ot mass for special use shall bethe quintal. (Symbol: q)
The quintal is equal to 100 kilograms. The qUintal may be USedin large
commerCial transactions in food grain, farm produce and otherconsumer commodities.
r Wi II -~ 3(ii)J
THE SEVENTH SCHEDULE
(See rule 18)
C.G.S units with special names
---- 1
---~
---_ ..._-------'
• is value is that of the 'IT' calorie (5th International Conference on
Properties of Steam, London, 1956)
,o* This soectat unit was employed to express wavelengths of X-rays
*** This special unit was used to measure firewood
74
THE GAZETTE OF INDIA: EXTRAORDINARY
[PARTII-SEC 3(ii)J
::
THE NINTH SCHEDULE
(See Rule 19)
Important Physical Constants
(JJ~=-(hG/~=)1/2 _ _1_' r i_ .~' ._
- -- --ELECTROMAGNETIC CONSTANTS
~entary charge-'_ e 1.6-02-1--7-73-~-4-~-)_--1-'-i-10-.1""yc----,_l-0-.3-0---
I eth 2.41798836(72), /.1014AJ 10.30
f---- -- 206783461(61) i 10-1SWb -+-1 -----1
!~.~.f;~~:UX~;;~~~~:~_~'4~~. -.767(14)~~'H.'. V' i:::--c:-=-----j
~antized Hall conductanc~ e Ih 3.87404614(17) . 10' S .__ ~0.045 J
.
' qu.antized Hall r.e...Sistance, ~. RH ..25812.8056(12) 10 0.045 ~
lJ:!!e2= 1/2fJoe/a . ----c-::-----+i--::-...-r-=-r_--+- ---t
i Bohr magneton, IJB i 9.2740154(31) I 1O-<!4Jr1 0.34
'eli/2me ~ I
~----- ..----.--- ---. -.- -- ----------t--."..-=-r--+ -II in electron volts, I 5.78838263(52) 110-:> eVT·1 0.089
~B/~ __ ...__. j. I
J_!ll:!_ertz,lJB~ .
in wavenumbers, J..lB/hc__
in kelvinsc.!JB/k
L__Q_l:J_~learIf1~n~ton,__~_h/?!!1
U~'.~~t9J:l~~.t~,_IJN/_{E!}__
~rtz, I-IN~_b__ _
~in wavenuf"!1bE!r:.?~N/h£.
I in kelvins,~ _
! Quantity Symbol Value I Units Relative
1 Uncertainty
- J ]ppm)I GENERAL CONSTANTS
Universal Constants
speed of 'ight in vacuum c J299792458 ms-l (exact)i permeability of vacuum 1-10 I 4rr x 10-7 NA·t: (exact)I
f12566370614 .. 10-7NA2i permittivity of vacuum ,
i Eo i1~- , 10'u Frn' (exact)o ~ •
,
iG =8.854187817 Ii ..INewtonian constant of 6.67259(85) 110-11 128i graVitation i m3kg-1s·2: Planck constant Ih 6.6260755( 40) ! 10'J4Js 0.60
'1O-15evs
,UI} electron volts, hi {e! 4.135669~12j_ 0.30 i-- ..---I hi (2rr) Ii 1 05457266(63) 10·34Js 0.60I in electron volts h / {e1 6.5821220120j_ 1O-16eVs 0.30I Planck mass, m, 2.17671(14) 10-8kg 64(!:lEIG~ i
•i., - ---.---.-------+0
.1.61605(10) fO-35m ---~Planck length I Ip
64: him c = (hG/c3) 1/2 . !r-:--~---.........----------_.__.....___.____.._________.__ -----_ ..._ .. ,.
1O-44s 164
-"-J Planck time t 539056(34)
- i~=::+l 39962418142) IW"Hzp--l030
. 46.686437(14) _ I m' r': t 0.30
0.6717099(57) J Kr' 8.5
--P----i -~ f\J -_ - - ___j__§ ',Q_507866_O_D___ _J__~rl 0.34 J-- 1-- ---- ___j_:U_~2451~28J- __ J 10- eVT-1 0.089±= 7.6225914_(_23l__ i MHzr' 0.30 J-- ------ 2.54262281(77) , 10-2m-' r1
0.30 !--1 . ------r3:658246(31) --rw-4Krl
8.5 --- ..
J
ATOMIC CONSTANTS F------1----...:...__~--~
I 'I1fTf II-~ 3(ii)J
75
; fine-structure constant. , a
; ~lJoce2/h I 729735308(33) 10045
Ii inverse fine-structure
constant
! RYdberp, constant.
; ~meca Ih
0.045137.0359895(61)
0.001210973731.534(13)
, in hertz, Rooc 3.2898419499(39) I 1015Hz 0.0012
i in joules. Roohc I 2.1798~41(13~ ,1Q"OJ 0.60
I in eV. Roohcl{e} 136056981(81) leV 0.30
r Bohr radius. a/4lTR.. a, 0.529177249(24) I 1Q-10m 0.045
----------------- - -
nu: GAlErrE Of INDIA: EXTRAORDINARY
....___
nCT;{e} i I 939.56563(28l _ i Mev 0.30
mass ra~io I mnl me_ 11838.683662(40) -L- 0.022
ass_Latio-=bm, I mp ~01378404(9) ~ i 0.009
ss ___ _M(n), f\.'1n . .1008664904(~ ___+_!Q;:5kg/mol 0.014
! Ac,n I 1 31959110(12) • 10 -m 0.089
C J: :
- =tAc, n 2.10019445(19) 116~- 0.089
0.41moment _I:!n 0.96623707(40) /10-"° rr'
s.; I I:!n I ~B 1 04187563(25) _ I 10-J 0.24--'---_----_
..
['qj1f 11-"&116 3(ii)]
77
I~e~~~~:::I:.;,~~e~;~netiCj~:;~.-++g~~-- i1=CP--ig~:=----=I
I moment ratio !, : +- I
! neutron-protonmagnetic --nJn-T~;----tO.68497934(16f --+ I 024-----1
i moment ratio ..... ._.__ ... 1 .. .___ . J__________ __ ~
DEUTRERON
i deuteron mass lr:!:l_Q_ L}.3435860(20)--- : 1O.27kg ; 0.59 ~
. - .-.1--- 12.013553214(24) i U 10.012 i
lIn electron mass, m~L_/ i 1875.61339(57) : MeV i 0.30 ---1
! ~~~eron-electron mass i md/ me /3670483014(75) --.--L I 0.020 !
_ I deuteron-proton mass---Tmd / mp --I-T999007496(6) I 0.003 --I
i ratIo ! i _ • i ,"~~:~:=~entJ~~'~!!~~=~1£~{!=·-=l
i~e:~~~:,:~~e~~r1etic---~t~-7t~--tg~~~~~~~~6~~h--'-.L16~--------1 g~~~--j
: moment ratio . i!
,.---- ---.--.-.-~.---".-.-.--.,... - -- ----~----- ._-_ -~-+-- -.---- ------t" -----. -- ---1
j deutron-proton magnetic I IJd / IJp I 0 3070122035(51) I 0.017 :
moment ratio ! I . I !
-:-_--:- -_-=---pj::f'lSlCO-CHEMICAlCONS:rOOS-------.-:--.---- ---l
~og.adro constant _ INA, L 16 022J3367(36) ---L 1023 morr ! 0.59 1
atomic mass constant 1m, 11.6605402(10) ! 10-27 kg I 0.59 '
rn, = 1/12m(12C) f: : i i
:-in electronvolts, m:-c2fe '-T- --.. '---r93f494322a -- ...- - ,-M-ev ------- - -t 6.30--------1
iFa;:a(TaYcor,-stant-----~-·1···_~_~ :_~~~D-648K369~~--~::rcmoi:l---:----t-6~30---=~ __-1
i molar Planck constant fNAh ! 3.99031323(36) , '1Q-l(jJSmorrn.:.~ 1
I NAhc O,1196265811l_' Jm mOrT _~089 J
LD1olar~s constant _: R 8314510(7QL__ I Jmol"K-1 18.4 . I
~.oltznan~_corl~!~Qt_~/~~ _ I k l1.380658{12) • 10.23 J ~ I 8.5 ---.~
-:~~~.w°kihvO'tsk/{~ .. f - . : ~ ~~~~~fi~~l···..~§~~~ f~L=~-;
; in wavenum~~j~__k7h~ __ --L-~:~__. r6g-~()~~I($·9.) ---~~:TK~_'_-- .J.~-~-.___ __~;
molar volume (ideal gas). I Vm i 2241410(19) Llmol 184
! ~~i73.15 K I "
Ip=101325Pa . !
; Loschmidtconstant~-'- --I no ---'T 26S-Er763(-23)----
; NANm I
T=273.15K, p=100"kPa" ---Tv~------' T 2-i7110aTfg)
i I
i~~~~~~~!e~~~~:~~o-ns-ta-n-t- jSJR -- Tn-5-1693(-2-1-) -- --- -........... - --- T1S---'- ----j
I constant)" I
------- ---.------ '2\Jff-----'" +
: 5/2 + In {(2ITmukTl/h ) I
kT1/po} I
T = 1 k, I
= 100 kPa L _
Llmol
--. ._-
, -1 164856(21) 18
78
THE GAZEITE OF INDIA: EXTRAORDINARY
(P,\lU II - SIC 3(ii)/
s: --------------.- ---T ---~---------_--.--.
I~~e~a~~~~r:,:a~nconstant:ta ---- -----1567051 (19)-- --tw;m ~l4' (rr2/602k4/h3c2 i I
_
if ~~~~~diatiOnconstant· '--rc;---'-- -t-I--=-3.-:::7:-;4-~17:::7:-:4;-;;:9-;:(2;;-::2:-;--)--_ i; 10- m _--=-0-=.6:-:-0--
~- - --. - - I ----:;:-;-__
i second radiation constant, i C2 1001438769(12) ! mK . 8.4
I hc/k _ I' !
t Wien displacement law I b 2.897756(24) _1O-3mK 8.4! constant,
~--"-----'-------j------j----------+----b:: AmaxT::
i C2/4.96511423 ...
.'
. The scalar magnitude of the neutron moment is listed here. The neutron
magnetic dipole is directed oppositely to that of the proton..and corresponds
to the dipole associaled with a spinning negative charge distribution. The
vector sum lid :: lip + lin, is approximately satisfied.
" The entropy of an ideal monoatomic gas of relative atomic weight Ar is given
by S :: So+ 3/2 RhAr - RIA(p/po)+ 3/2 Rln (T/K)
THE TENTH SCHEDULE
(See Rule 20)
The fOllowingco-efficients shall be used for the purpose of these rules: _
1. Alcoholic strength - (a) The "alcoholic strength by volume" of a mixture of
water and alcohol is the ratio of the volume of alcohol, measured at 200C,
contained in the mixture to the total volume of the mixture measured at the
same temperature The symbol is "%Vol".
(b) The "alcoholic strength by mass" of a mixture of water and alcohol is the
ratio of the mass of alcohol contained in the mixture to the total mass of themixture. The symbol is "%mass".
For the purpose of the inter-relation between these two strengths and
between the density of the aqueous solution of alcohol, the International
Recommendation No. 22 on Alcoholometry, together with the International
Alcoholometric Tables, shall be used.
2. Hardness numbers for materials - (a) Brinel/ Hardness Number _ A
number related to the size of the permanent impression made by a ball
indenter of specIfied size, pressed into the surface of the material under a
specified load. The surface area of the impression is determined from the
average measured diameter of the rim of the impression and from the ball
diameter. In reporting Brinell hardness number, the International
Recommendation No.9, on Verification and Calibration of Brine" HardnessStandards Blocks, shall be used
(b) Diamond Pyramid or Vickers Hardness Number _ A number obtained by
dividing the load in kilograms applied to a square-based pyramidal diamond
indenter having included face angles of 136° by the surface area of the
impression calculated from the measured diagonal of the impression. In
reporting·diamond pyramid hardness, the International Recommendation No.
10, on Verification and Calibration of Vickers Hardness Standards BlOcks,shalf be used.
(c) Rockwell Hardness NUmber - A number derived from net increase in
depth of impression as the load on an indenter is increased from a fixed
minimum load to high load and then returned to the minimum load. In
['qJTf II-~ 3(ii)] 79
reporting Rockwell hardness number on Rockwell B scale, the International
Recommendation No, 11, on Verification and Calibration of Rockwell B
Hardness Standardised Blocks, shall be used.
Similarly, in reporting Rockwell hardness number on Rockwell C scale,
the International Recommendation No. 12, on Verification and Calibration of
Rockwell C Hardness Standardised Blocks, shall be used
3. For the purpose of determining the sugar content present in the sugar
solutions either of the two following coefficients may be used. Degree Brix or
sugar degree (oS):_
(a) Degree Brix is the percentage of sucrose present by mass in the sugar
solution. In reporting the degree Brix, Indian Standard specification for Brix
hydrometers: (IS 7324-1974) shall be used, till such time, the Director of
Legal Metrology or the International Organisation of Legal Metrology prepares
such document. ~ •
(b) Sugar degree on the international sugar scale is defined as follows:-
The 100° S point of the International Sugar Scale is fixed by the optical
rotation 'IJ' undergone by the polarized light of the green line of the mercury
isotope 198 (1J-546.2271mm in vacuum). When passing through a 200.000
mm length of sucrose solution in pure water, kept at a temperature of
20.000C.and containing 26.0160 g, weighed in a vacuum of pure sucrose per
100.000 em" of solution 'normal' sugar solution.
A mass of 26.0160 9 of sucrose corresponds to 26.000 9 when this
sucrose is weighed in air by means of weights with a density of 8000 kg/m3 fn
air, at a standard pressure of 101325 Pascal, at a temperature of 20°C and a
relative humidity of 50%. the density of this air therefore being 1.2 kg/m3.
4. Relative Humidity - It is the ratio of the actual vapour pressure of water
vapours present in air at the temperature of measurement of the saturation
vapour pressure over a plane liquid water surface at the same temperature.
This is expressed as a pure number as percentage.
5. ph is the logarithm to the base 10 of the inverse ofthe hydrogen ion
concentration in a dilute ionic solution
Explanation.
A 0.04 molar hydrochloric acid solution will have hydrogen ion
concentration of 10-14 mol and its ph value is 1.4. Similarly. 0.001 mol
hydrochloric acid solution will have the hydrogen ion concentration of 10-3 mol
and its ph value is 3.
[F. No.WM-9(6)/2010-Pt]
RAKESH KACKER, Addl. Secy.
------_ ..._--
Printed by the Manager. Government of IndIa Press. Ring Road. Mayapun. New Dcllu-}I OOM
and Published by the Controller of Publications. DclI1I-IIOO;4
Previous and next
All provisions of Legal Metrology (National Standards) Rules,2011
Questions people ask
Is rule 33 of Legal Metrology (National Standards) Rules,2011 still in force?
No repeal of Legal Metrology (National Standards) Rules,2011 is recorded.