Rule 34, The Legal Metrology (Packaged Commodities) Rules, 2011.: Repeal and savings
The Legal Metrology (Packaged Commodities) Rules, 2011. - Rule 34
Text of rule 34
Repeal and savings
34. Repeal and savings.-
Page 26 of 43
(1) The Standards of Weights and Measures (Packaged Commodities) Rules, 1977 are
hereby repealed.
Provided that such repeal shall not affect:
(a) the previous operations of the said rules or anything done or omitted to be done or
suffered therein; or
(b) any right, privilege, obligation or liability acquired, accrued or incurred under the said
rules; or
(c) any penalty, forfeiture or punishment incurred in respect of any offence committed
against the said rules; or
(d) any investigation, legal proceedings or remedy in respect of any such right, privilege,
obligation, liability, penalty, forfeiture or punishment as aforesaid.
And any such investigation, legal proceedings or remedy may be instituted, continued or
enforced and any such penalty, forfeiture or punishment may be imposed as if the said
rules had not been rescinded.
(2) Notwithstanding such repeal anything done or any action taken or purported to have
been done or taken including approval of letter, exemption granted, fees collected, any
adjudication, enquiry or investigation commenced, license and registration of
manufacturers, dealers, importers of pre-packaged commodities, or show cause notice,
decision, determination, approval, authorization issued, given or done under the said rules
shall if in force at the commencement of the said rules continue to be in force and have
effect as if issued, given or done under the corresponding provisions of these rules.
(3) The provisions of these rules shall apply to any application made to the Central
Government or as the case may be the State Government under the said rules for licence,
registration of manufacturers, importers, dealers of pre-packaged commodities pending at
the commencement of these rules and to any proceedings consequent thereon and to any
registration granted in pursuance thereof.
(4) Any legal proceeding pending in any court under the said rules at the commencement
of these rules may be continued in that court as if these rules had not been framed.
(5) Any appeal preferred to the Central Government or as the case may be the State
Government under the said rules and pending shall be deemed to have been made under
the corresponding provisions of these rules.
Page 27 of 43
THE FIRST SCHEDULE
[See Rule 2(e)]
1. Maximum permissible errors on net quantity declared by weight or volume.-
(1) The maximum permissible error, in excess or in deficiency, in the net quantity by
weight or volume of any commodity shall be as specified in Table I below:-
TABLE-I
Maximum permissible errors on net quantities declared by weight or by volume
Sl. No. Declared quantity
g or ml
Maximum permissible error in excess or in deficiency
As percentage of declared
quantity
g or ml
(i) up to 50 9 -
(ii) 50 to 100 - 4.5
(iii) 100 to 200 4.5 -
(iv) 200 to 300 - 9
(v) 300 to 500 3 -
(vi) 500 to 1000 - 15
(vii) 1000 to 10000 1.5 -
(viii) 10000 to 15000 - 150
(ix) More than 15000 1.0 -
(2) The maximum permissible error specified as percentage shall be rounded off to the
nearest one-tenth of a g or ml, for a declared quantities less than or equal to 1000 g or ml
and to the next whole g or ml for declared quantities above 1000 g or ml.
Page 28 of 43
2. The maximum permissible errors on net quantity declared by length, area or number. -
(1) The maximum permissible error, in excess or in deficiency, in the net quantity
declared in terms of length, area or number of any commodity not specified in the First
Schedule shall be as specified in Table II below:-
TABLE -II
The maximum permissible errors on net quantities declared by length, area or number
Sl. No. Quantity Declared Maximum permissible error in excess or in deficiency
(i) in units of length 2% of declared quantity up to 10 metre and thereafter 1% of declared
quantity.
(ii) in units of area 4% of declared quantity up to 10 sq. metre and thereafter 1% of declared
quantity.
(iii) by number 2% of declared quantity.
THE SECOND SCHEDULE
(See rule 5)
Commodities to be packed in specified quantities
The following commodities shall be packed in such quantities by weight, measure or
number as are specified in the corresponding entries against them.
Sl. No. Commodities Quantities in which to be packed
1. 2. 3.
1. Baby food
100g, 200g, 300g, 400g, 500g,
600,g, 700 g, 800 g, 900g, 1 kg,
2kg, 5 kg and 10 kg.
Page 29 of 43
Weaning food.
100g, 200g, 300g, 400g, 500g,
600g, 700g, 800g, 900g, 1 kg, 2 kg,
5 kg and 10 kg.
2.
Biscuits
25g, 50g, 75g, 100g, 150g, 200g, 250g, 300g and thereafter in multiples
of 100g up to 1 kg.
3.
Bread including brown
bread but excluding
bun.
100g and there after in of multiples 100g. 4.
Un-canned packages
of butter and
margarine
25 g, 50 g, 100 g, 200 g, 500 g, 1 kg, 2 kg, 5 kg, and thereafter in
multiples of 5 kg.
5.
6. Cereals and Pulses 100g, 200g, 500g, 1 kg, 2 kg, 5 kg and thereafter multiples of 5 kg
7. Coffee 25g, 50g, 100g, 200g, 250g, 500g, 1kg and thereafter in multiples of 1kg.
8. Tea 25g, 50g, 100g, 125g 250g, 500g, 1kg and thereafter in multiples of 1kg.
Materials which may
be constituted or
reconstituted as
beverages.
25 g, 50 g, 100 g, 200 g, 500 g, 1 kg and thereafter in multiples of 1 kg. 9.
10
Edible Oils Vanaspati,
ghee, butter oil
50 g, 100 g, 200 g, 500 g, 1 kg, 2 kg, 3 kg, 5 kg and thereafter in
multiples of 5 kg If net quantity is declared by volume the same number
in milliliters or liters, as the case may be. If the net quantity is declared
by volume, then the equivalent quantity in terms of mass to be declared
Page 30 of 43
in brackets in same size of letters/ numerals
Milk Powder.
Below 50g no restriction, 50 g, 100g, 200g, 500 g, 1 kg and thereafter in
multiples of 500 g.
11.
Non-soapy detergents
(powder)
Below 50 g no restriction, 50g, 100g, 200g, 500g,
700g, 1kg, 1.5 kg, 2 kg and thereafter, in multiples
of 1 kg.
12.
Rice(powdered), flour,
atta, rawa
and suji.
100g, 200g, 500g, 1kg, 2kg, 5 kg and
thereafter in multiples of 5 kg.
13.
Salt
Below 50g in multiples of 10g, 50g, 100g, 200g, 500g, 750g, 1 kg, 2 kg,
5 kg and thereafter in multiples of 5 kg.
14.
15. Soaps
(a) Laundry Soap 50g, 75g, 100g, and thereafter in multiples of 50g.
(b) Non-soapy
detergent cakes/ bars.
50g, 75g, 100g, 125g, 150g, 200g, 250g, 300g and thereafter in multiples
of 100g
(c) Toilet Soap
including all kinds of
bath soap (cakes).
25g, 50g, 75g, 100g, 125g, 150g and thereafter in multiples of 50g.
16.
Aerated soft drinks,
non-alcoholic
beverages.
65 ml (fruit based drinks only), 100 ml, 125ml(fruit based drinks only),
150 ml, 200 ml, 250 ml, 300 ml, 330ml(in cans only), 500 ml, 750 ml, 1
litre, 1.5 litre, 2 litre, 3 litre, 4 litre and 5 litre.
Page 31 of 43
17.
Mineral water and
drinking water
100 ml, 150 ml, 200 ml, 250 ml, 300 ml, 500 ml, 750 ml, 1 litre, 1.5 litre,
2 litre, 3 litre, 4 litre and 5 litre.
Cement in bags.
1 kg, 2 kg, 5 kg, 10 kg, 20 kg, 25 kg, 40 kg (for White cement only) and
50 kg.
18.
19. Paint varnish etc.
(a) Paint (other than
paste paint or solid
paint) varnish, varnish
stains, enamels.
50 ml, 100 ml, 200 ml, 500 ml, 1 litre, 2 litre, 3 litre, 4 litre, 5 litre and
thereafter in multiples of 5 litre.
(b) Paste paint and
solid paint
500g, 1 kg, 1.5 kg, 2 kg, 3 kg, 5 kg, 7kg and thereafter multiple of 5 kg.
(c) Base paint:
450 ml, 500 ml, 900 ml, 925 ml, 950 ml, 975 ml, 1 litre, 3.6 litre, 3.7
litre, 3.8 litre, 3.9 litre and 4 litre and no restriction above 4 litre.'
THE THIRD SCHEDULE
(See Rule 11(4))
Declaration of quantity in relation to commodities (sold by weight or volume) which may be qualified by the words
“When packed”
Sl. No. Name of commodity
1. All kinds of Soaps
2. Lotions
3. Cream (other than cream of milk)
Page 32 of 43
THE FOURTH SCHEDULE
(See Rule 12(2))
Exceptions referred to in Rule 12(2)
1. The following commodities in packaged form may be sold by weight, measure or
number as shown against the commodity:-
TABLE
----------------------------------------------------------------------------------------------------------------------------------------------------
Sl. Commodity Whether declaration to be expressed in terms
No. of weight, measures or number or two or more of
them
----------------------------------------------------------------------------------------------------------------------------------------------------
1. 2. 3.
----------------------------------------------------------------------------------------------------------------------------------------------------
1. Aerosol Products Weight
2. Acids in liquid form Weight or volume
3. Compressed or liquefied Weight and equivalent volume
gas (but not liquefied petroleum gas) at stated temperature and pressure
4. Curd Weight
5. Electric Cables Length or weight
6. Electric wire Length or weight
7. Fencing wire Number or weight
8. Fruits, all kinds Number or weight
9. Furnace oil Weight or volume
10. Non edible vegetable oil Weight or volume
11. Edible oil, Vanaspati Weight or volume
ghee and butter oil
12. Heavy residual fuel oil Weight
13. Industrial diesel fuel Volume
14. Honey, malt-extract, Weight
golden syrup treacle
Page 33 of 43
15. Ice cream and other * Volume
similar frozen products
16. Liquid chemicals Weight or volume
17. Liquefied petroleum gas Weight
18. Nails, wood screws Number or weight
19. Paints other than paste Volume
paint or solid paint) Varnish
varnish stains, enamels
20. Paste paint, solid paint Weight
21. Rasgulla, Gulabjamun Weight
and other sweet preparations
22. Ready-made garments Number
23. Sauces, all kinds Weight
24. Tyres and tubes Number
25. Yarn Weight or length of yarn.
26. Cosmetics including Weight or measure
creams, shampoo, lotions and perfumes
* Provision will stand amended wef 01.07.2012 vide GSR 748(E) dated 24.10.2011.
Volume will be replaced by Weight.
THE FIFTH SCHEDULE
(See Rule 19)
Manner of Selection of Sample Packages
1. For determination of the net quantity for any commodity contained in a package, the
sample size shall be such as is specified in the corresponding entry column 2 of the Table
below against the lot size specified in Column 1 of the said Table.
Page 34 of 43
TABLE
Lot Size Sample Size
(1) (2)
Less than 4000 32
More than 4000 80
2. The sample shall be selected at random in accordance with the manner specified in
paragraphs 3 and 4.
3. Where, for the determination of the net quantity of any commodity contained in a
package it is necessary to take samples of packages stored by the manufacture or packer
in a ware house, go-down or at any other place, the sample shall be selected at random,
from ever lot of packages and shall be picked out from the top, bottom, center, right, left,
front and rear of the stocks so that the samples may adequately represent the packages in
the lot.
4. Where, for the determination of the net quantity of any commodity contained in a
package it is necessary to take samples form the place where the package is being filled
such samples shall be selected from among the package which have already been filled,
or in the alternatively, the requisite number of empty containers may be taken over and
each of them shall be adequately marked for proper identification and the tare weight of
each container shall be accurately noted and thereafter the marked containers shall be
introduced at random in the packing process so that, after the packages are filled in may
be possible to determine the net quantity
Explanation: In this schedule 'Sample size' means the umber of packages to be selected as
sample.
Page 35 of 43
THE SIXTH SCHEDULE
(See Rule 19)
Determination of the Net Quantity of Commodities in Packages
Part-I – Equipment
1. Equipments required-
(1) The Director, Controller or any Legal Metrology Officer authorized by or under the
Act, to determine the net quantity; of commodity contained in any package, shall be
provided by the concerned Government with adequate equipments and facilities to
carry out his work to the required degree of accuracy in an Expedient and efficient
manner.
(2) The equipments, referred to in sub-paragraph (1), shall ordinarily consist of working
standard weights and balances, or any other weight or measure declared by the Director
to be suitable for determining the net quantity contained in the concerned package.
(3) The Director, Controller or any Legal Metrology Officer shall, before determining the
net quantity contained in any package, ensure that the working standards and other
equipments are functioning properly.
2. Working standards to be ordinarily used.-(1) Ordinarily, working standards and other
weights and measures, duly verified shall be used for determining the net quantities
contained in packages and the errors, if any, in relation to the net quantity declared on
the package.
Provided that, where it is necessary to use the weights and measures, owned or controlled
by the manufacturer, packer or wholesale dealer as the case may be such weights and
measures, shall be used unless the maximum permissible error of such weights and
measures is twenty per cent or less of the maximum error permitted n relation to the net
quantity of the commodity contained in the packages.
(2) It shall be the duty of every manufacturer, packer or wholesale dealer to render such
assistance the Director, Controller or any Legal Metrology Officer as the Director or
other authorized person may require in order carrying out his duties expeditiously and
efficiently.
Page 36 of 43
(3) Where any weight, measure or other equipment, owned or controlled by the
manufacturer, packer or wholesale dealer is used by the Director, Controller or any Legal
Metrology Officer for the determination or the net quantity contained in any package,
such weight, measure or other equipment shall not be released by the Director or other
authorized person until his work is completed.
Part-II - Instructions with regard to the determination of quantity and error at
manufacturer's or packer's premises.
3. (1) If empty tare packages are available, one such package shall be taken and tare
package weight determined. If the tare package weight is equal to or less than three-
tenths of the maximum permissible error for the concerned commodity of that quantity, it
shall be assumed that the tare package weight so determined is valid for all the other
packages in the sample, and the sample packages shall then be weighed for gross weight,
and thereafter the net weight of commodity contained in each package shall be obtained
by subtracting the tare package weight from the gross package weight. If the tare package
weight so determined is more than three tenths of the maximum permissible error in
relation to the commodity for that quantity, weight of four emptier tare packages shall be
determined. If the difference between the maximum tare package weight and the
minimum tare package weight of the five samples is equal to or less than four tenths of
the maximum permissible error allowed for that commodity for that quantity, the tare
weight of the package shall be taken as equal to the average of the five tare package
weights. The gross weight of the package in the sample shall then be determined and the
average tare package weight shall be subtracted from the gross package weight to obtain
the net contents of the commodity in each package, in the sample. However, when the
difference in the five individual tare weights of the packages exceeds the limit of four
tenths of the maximum permissible error specified above, the procedure specified in sub-
paragraph (4) or sub-paragraph (5), as the case may be, shall be adopted for determining
the net quantity of individual packages.
(2) In the absence of empty tare packages, one package from the sample shall be opened
and the net weight of the commodity and the tare weight of the package determined. If
Page 37 of 43
the tare weight of the package is equal to or less than three-tenth of the maximum
permissible error for that concerned commodity of that quantity, it shall be assumed that
the tare weight of one package so determined is valid for all the other packages in the
sample, and the remaining packages shall then be weighed for gross weight, and
thereafter the net weight of commodity contained in each package shall be obtained by
subtracting the tare weight from the gross weight.
(3) If the tare weight of the package specified in sub-paragraph (2) is more than three-
tenths of the maximum permissible error in relation to that commodity, four more
packages in the samples shall be opened and the net weight of the commodity in each
package as well as the tare weight of each package shall be determined. If the difference
between the maximum tare weight and the minimum tare weight of five samples is equal
to or less than four-tenths of the maximum permissible error for that commodity of that
quantity, the tare weight of the package shall be taken as equal to the arithmetic mean of
the five tare weights. The gross weight of the packages in the sample shall then be
determined to the requisite accuracy and the average tare weight of the contained shall be
subtracted from the gross weight to obtain the net contents of the commodity in each
package in the sample.
(4) Where it is found on examining the first package, as described in sub-paragraph (2)
that the tare weight of the container exceeds the limits specified in sub-paragraph (2) and
sub-paragraph (3) and the determination of net contents, cannot be carried out without
opening the remaining packages, or it is not, possible to use the procedure to use the
procedure described in sub-paragraph (5) the size of the sample to be examined shall be
restricted to that indicated in column (2) , in accordance with the lot indicated in
column(1) of Table of the Fifth Schedule and the determination of net quantity shall be
carried out by opening all the packages in the sample.
(5) Where it is likely that the process of determination of the actual net quantity may be
destructive and it is possible to feed empty package into the packing process without
affecting the results, the following procedure shall be used:
(a) the number of empty packages, depending upon the size of the lot, in accordance with
columns (1) and (2) of Table of the Fifth Schedule shall be selected;
(b) the empty package shall be marked suitably to identify them from the other packages;
Page 38 of 43
(c) the weight of each empty package, with its other parts which are to be fitted on it
after it is filled shall be determined and the weight suitably recorded on the empty
package and also on the Form specified in the Seventh Schedule;
(d) the empty package shall then be filled by introducing them in a random manner in
the packing process, and such introduction shall be adequately spread over the duration
in accordance with which ;the size of the lot is determined;
(e) the marked packages shall be taken out after completion of the filling and sealing
operations and each such filled package shall be weighed again to the requisite accuracy;
(f) the net quantity shall be obtained by deducting the tare weight determined in
accordance with clause (c) from the gross weight.
(6) The Director, Controller or any Legal Metrology Officer shall enter results of this
examination of gross weight, net weight and tare weight in the Form specified in the
Eleventh Schedule along with such other observation as he may wish to make on the
basis of his examination.
4. Determination of liquid contents by volume.-(1) If the specific gravity of the liquid
commodity filled in packages remains sufficiently constant for a lot and it is possible to
determine accurately its specific gravity the method of determination of net contents by
weight, described in paragraph 3 may be used.
(2) If the method described in sub-paragraph (1) is not feasible the containers shall be
opened and the contents of each package poured out carefully into the appropriate
volume measure.
(3) The reading of the actual net volume of the commodity in every package shall be
noted carefully and recorded in the Form specified in the Seventh Schedule.
5. Verification of length of commodities.-(1) The sample shall be selected in the manner
specified in the Fifth Schedule.
(2) If it is not possible to measure the dimensions with out opening the package, the
package shall be opened.
(3) The length of the commodity shall be measured by means of a calibrated steel tape of
suitable length.
Page 39 of 43
(4) If the actual length of the commodity is so great that it is not possible to measure it
with the tape measure and a suitable length measuring instrument is available on the
premises, that instrument shall be use, after duly calibrating it by suitable means, with
the steel tape serving ala working standard of length.
(5) The reading of the actual length of the commodity in every package shall be noted
carefully and recorded in the Form specified in the Seventh Schedule.
(6) Verification of commodities packed by number. The Director, Controller or any Legal
Metrology Officer shall take packages from the sample drawn by him in the manner
specified in the Fifth Schedule and determine the extent of error, by actual counting in
each such package and may, for that purpose open all packages.
7. Checking of other declarations.-(1) The declarations made on the package or on the
label affixed thereto, shall be examined with a view to ascertaining whether such
declarations conform to these rules and may be ensured either at the factory level or at
the depot of the factory .
(2)The additional declarations made on the package or on the label affixed thereto in
respect of item (g) and (h) of sub-rule (1) of rule 6 shall also be examined to ascertain
whether they are adequate.
THE SEVENTH SCHEDULE
Previous and next
All provisions of The Legal Metrology (Packaged Commodities) Rules, 2011.
Questions people ask
Is rule 34 of the Legal Metrology (Packaged Commodities) Rules, 2011. still in force?
No repeal of the Legal Metrology (Packaged Commodities) Rules, 2011. is recorded.