Rule 20, The Legal Metrology (Packaged Commodities) Rules, 2011.: Action to be taken on completion of inspection of packages at the premises of the manufacturer or the packer
The Legal Metrology (Packaged Commodities) Rules, 2011. - Rule 20
Text of rule 20
Action to be taken on completion of inspection of packages at the premises of the manufacturer or the packer
20. Action to be taken on completion of inspection of packages at the premises of the
manufacturer or the packer.-
(1) If it appears from the report referred to in sub-rule (3) of rule 19 that,-
(a) the statistical average of the net quantity contained in the packages drawn as samples
under that rule is lesser than the quantity declared on the packages or on the labels affixed
thereto, or any such package shows an error in deficiency greater than the maximum
permissible error, or
(b) any such package does not bear thereon or on label affixed thereto the declarations to
be made under these rules, the Director, Controller or any Legal Metrology Officer shall
take action the following action, namely:-
Page 19 of 43
(i) seize the packages drawn by him as samples and shall take adequate steps for the safe
custody of the seized packages until they are produced in the appropriate court as
evidence;
(ii) based on the evidence initiate action for violations of the provisions of the Act and
these rules:
Provided that no such action shall be taken if fresh tests are carried out under sub-rule (4)
of rule 19, but if after such fresh tests any such error or omission as is referred to in this
sub-rule is detected, the Director, Controller or any Legal Metrology Officer shall take
appropriate action as specified in this sub-rule in accordance with the provisions of the
Act against the manufacturer or, as the case may be, the packer.
(2) The disposal of the seized packages shall be made in accordance with the provisions
of the Code of Criminal Procedure, 1973 (2 of 1974).
21. Inspection of quantity and error in packages at the premises of the wholesale
dealer or retail dealer
(1) Ordinarily, any test in relation to the net quantity contained in a package shall not be
carried out at the premises of the retail dealer or the wholesale dealer, unless-
(i) a complaint is received by the Director or the Controller or any Legal Metrology
Officer to the effect that the package sold or delivered to the complainant does not
contain the quantity declared on such package or on the label affixed thereto;
(ii) the Director or the Controller or any Legal Metrology Officer has reason to suspect
that any package has been tampered with or that there has been any pilferage or leakage
of the commodity contained in the packages
(iii) the Director or the Controller or any Legal Metrology Officer and any package, or
any label affixed thereto, does not bear thereon all or any of the declarations which are
required to be made under these rules.
(2) Where any test is carried out in pursuance of the provisions of sub-rule (1), the
Director, Controller or any Legal Metrology Officer shall verify whether the quantity
contained in the package corresponds to the quantity declared on such packages or any
label affixed thereto and where quantity contained in package is less than the declared
Page 20 of 43
quantity, whether the deficiency is more than the maximum permissible error in relation
to that commodity.
(3) Where the Director, Controller or any Legal Metrology Officer finds on a test carried
out under this rule that the error in deficiency in any package kept or stored for sale,
distribution or delivery at the premises of the retail or wholesale dealer is more than the
maximum permissible error in relation to that commodity, he shall seize such package
and take appropriate action against the retail dealer or the wholesale dealer, as the case
may be, in accordance with the provisions of the Act:
Provided that where the package bears the legend 'when packed', no punitive action shall
be taken against the retail dealer or wholesale dealer if the Director, Controller or any
Legal Metrology Officer is satisfied after necessary test that the deficiency in the net
quantity contained in package is due to environmental conditions.
(4) Where as a result of any test made under this rule, it is found that the net quantity
contained in the package conforms to the declared quantity or where there is a deficiency,
such deficiency is not more than the maximum permissible error, the retail dealer shall be
at liberty to sell or deliver or distribute such commodity at the price determined on the
basis of the quantity found on such tests.
(5)Where, as a result of any test made under this rule, it is found that any package, or any
label affixed thereto, does not bear thereon all or any of the declarations required to be
made under these rules, it shall be lawful for the Director, Controller or any Legal
Metrology Officer to make such enquiries as to the source from which such package was
received by the whole sale dealer or the retail dealer as the case may be, as he may think
fit.
Previous and next
← Rule 19Inspection of quantity and error in packages at the premises of the manufacturer or packerRule 22 →Establishment of maximum permissible error on package
All provisions of The Legal Metrology (Packaged Commodities) Rules, 2011.
Questions people ask
Is rule 20 of the Legal Metrology (Packaged Commodities) Rules, 2011. still in force?
No repeal of the Legal Metrology (Packaged Commodities) Rules, 2011. is recorded.