Rule 12, The Legal Metrology (Packaged Commodities) Rules, 2011.: Manner in which declaration of quantity shall be
The Legal Metrology (Packaged Commodities) Rules, 2011. - Rule 12
Text of rule 12
Manner in which declaration of quantity shall be
12. Manner in which declaration of quantity shall be.—
(1) The declaration of quantity shall be expressed in terms of such unit of weight,
measure or number or a combination of weight, measure or number as would give an
accurate and adequate information to the consumer with regard to the quantity of the
commodity contained in the package.
(2) Except in the cases of commodities specified in the Fourth Schedule, the declaration
of quantity shall be in terms of the unit of -
(a) mass, if the commodity is solid, semi-solid, viscous or a mixture of solid and liquid;
(b) length, if the commodity is sold by linear measure;
(c) area, if the commodity is sold by area measure;
(d) volume, if the commodity is liquid or is sold by cubic measure; or
(e) number, if the commodity is sold by number:
(3) Where the declaration of quantity has been made in terms of mass, the manufacturer
or importer, as the case may be, the packer may, at his option make an additional
declaration on the package as to the number of commodities contained in the package.
(4) Where the declaration of quantity by weight or measure or number is not sufficient to
give to the consumer full information with regard to the dimensions or number of
commodity contained in the package, such declaration shall be accompanied by a
Page 12 of 43
declaration of the dimensions or number, or both, where necessary, of the commodity
contained in the package.
(5)Where it is necessary to communicate to the consumer any additional information
about the commodity contained in a package, such information shall also appear on the
same panel in which the other information, as required by these rules, have been
indicated.
*(6) The declaration of quantity shall not contain any word or expression which tends to
create an exaggerated, misleading or inadequate impression as to the quantity of the
commodity contained in the package, for example, words or expressions like-'minimum',
'not less than', 'average', 'about', approximately' or other words of a similar nature.
(7) For packages having capacity 5 cubic cm or less, the declaration of quantity shall be
made on a tag, card, tape, or any other similar device affixed to the container in such a
manner that it cannot be removed without opening the container and every such tag, card,
tape or other device shall contain mark or inscription which will enable the consumer to
identity the manufacturer or packer, as the case may be.
* Provision will stand amended wef 01.07.2012 vide GSR 748(E) dated 24.10.2011. It
will read “The declaration of quantity under these Rules shall not contain any word or
expression of any sort, whatsoever, which tends to create or likely to create an
exaggerated, misleading or inadequate expression as to the quantity of the commodity
contained in the package.
Previous and next
← Rule 11General provisions relating to declaration of quantityRule 13 →Statement of units of weight, measure or number
All provisions of The Legal Metrology (Packaged Commodities) Rules, 2011.
Questions people ask
Is rule 12 of the Legal Metrology (Packaged Commodities) Rules, 2011. still in force?
No repeal of the Legal Metrology (Packaged Commodities) Rules, 2011. is recorded.