Rule 12, Legal Metrology (Approval of models) Rules 2011: Mark of approval
Legal Metrology (Approval of models) Rules 2011 - Rule 12
Text of rule 12
Mark of approval
12. Mark of approval. - (1) The mark assigned to the model shall contain the national
identification letters, namely, IND, the last two digits of the year of the issue (for
example, 77), the code number assigned to . the laboratory and the code number
assigned to the model.
(2) The mark assigned to the approved model shall be clearly and legibly affixed at
such of the model as may be specified in the certificate of approval and also on
each weight or measure produced by the maker or manufacturer in accordance with the
- -- - - - - - -- - - -- -.- ._- -_ . _.- -- -
23 3(0]
approved model:
Provided that if the approved model -of the weight or measure to such
model is such that the mark assigned to the approved model cannot be affixed on it
(for example, where it is fragile or too small), that mark may be associated with the
conditions specified in the certificate of approval: .
Provided further that, where the approval is of a limited character, the mark of approval
shall be accompanied by a special mark indicating the limitations of the approval and
ditferent special marks may be made for different limitations.
Previous and next
All provisions of Legal Metrology (Approval of models) Rules 2011
Questions people ask
Is rule 12 of Legal Metrology (Approval of models) Rules 2011 still in force?
No repeal of Legal Metrology (Approval of models) Rules 2011 is recorded.