Rule 8, Legal Metrology (Approval of models) Rules 2011: Procedure for the issue of certificate of approval
Legal Metrology (Approval of models) Rules 2011 - Rule 8
Text of rule 8
Procedure for the issue of certificate of approval
8. Procedure for the issue of certificate of approval. - (1) After the completion of
the tests, the recognized laboratory shall send a report of its findings to the Director
with its recommendations whether the model satisfies the requirements of the Act and
the rules made there under.
• .. . ___
I
,
I
L
21 3(i)]
(2) The recognized laboratory may in an appropriate case, ' recommend that the
approval may be accorded provisionally to enable it to conduct detailed tests and where
in pursuance of such recommendation, provisional .approval is granted, test may be .
carried out on such number of instruments under such conditions of installation and
use, as may be specified by the Director, and such tests may be continued, where
the recognized laboratory thinks fit so to do, in the use of the weight or
measure, and the tests at such place of use shall be detailed ones and of such duration
and carried out on such number of weights or measures as may. be specified by the
Director. .
(3) The Director may require the recognized laboratory to send to him the detailed test
procedure adopted by thaf laboratory in approving the concerned model.
(4) On examination of report made by the recognized laboratory, the Director shall,
, where he is of opinion that no further test is required to be carried out, submit the
report to the Central Government and where he is of the opinion that further tests are
required, remit the report back to the recognized laboratory for carrying out such
further tests; there upon the recognized laboratory shall, after carrying out further
tests, submit a report to the Director.
(5) Where consideration of the report of the recognized laboratory, the Director is of
the opinion that a certificate of approval in relation to that model should be issued, it
shall recommend to the Central Government the issue of the certificate and shall also
forward to that Government a copy of the report submitted to it by the recognized
laboratory.
(6) The Central Government may, if the issue of a certificate or provisional certificate of
approval has been recommended by the Director, issue such certificate and authorize
the Director to authenticate the certificate for and on behalf of the Central Government.
(7) No provisional certificate issued under sub-rule (6) shall remain valid for a period '._
exceeding one year from the date of its issue.
Provided that the Central Government may, if is satisfied, on the recommendation of
the recognized laboratory, it necessary in the public interest so to do, extend the
period of validity of the provisional certificate for such period as it may think fit;
Provided further that the Central Government may also, on an application made to it by
the concerned manufacturer, extend the period of validity of the provisional certificate
for such further period as it may think fit if it is satisfied that the recognized laboratory,
haVing failed to complete the tests before the expiry of the period of validity the
provisional certificate, has unreasonably omitted to recommend the extension of such
period.
(8) A code number shall be assigned to each approved model and the code number
.
assigned shall indicated in the certificate, or provisional certificate of .approval, as
the case may be.
(9) Where the model any weight or measure to which these rules are' applies has
been approved, the models of different denominations of such weight or measure shall
not require any approval of such denominations which are manufactured in accordance
with the same principles according to which, and the same material with which the
approved model has been manufactured.
22 THE'GAZEITE OF INDIA: EXTRAORDINARY [PART II-SEC. 3(i)]
9. Procedure where issue of certificate of approval is not recommended.
Where the r.ecognized labor.atory does not recommend the issue of a certificate of
approval in relation any model, it shall specify its reasons therefore to the Director
who shall communicate reasons to the applicant with such directions as he may
think fit and.t hereupon the applicant may make a representation to the to the
effect that issue of the certificate of approval should have been recommended by
the recognized laboratory and on considering such representation, the Director may
either rejectit or recommend to the Central Government the issue of certificate of
approval.
Previous and next
All provisions of Legal Metrology (Approval of models) Rules 2011
Questions people ask
Is rule 8 of Legal Metrology (Approval of models) Rules 2011 still in force?
No repeal of Legal Metrology (Approval of models) Rules 2011 is recorded.