LawGrids logoLAWGRIDS.ORG

Rule 26, The Delhi Legal Metrology (Enforcement) Rules 2011: Repeal and Savings

The Delhi Legal Metrology (Enforcement) Rules 2011 - Rule 26

Text of rule 26

Repeal and Savings

26. Repeal and Savings.– (1) The Delhi Standards of Weights and Measures (Enforcement) Rules, 1988 shall cease to have effect from the date of issue of these rules. (2) Notwithstanding any such repeal, anything done or any action taken or purported to have been taken or any licence granted under the rules repealed by sub-rule (1), shall in so far as these are not inconsistent with these rules or the Legal Metrology Act, 2009 (1 of 2010), be deemed to have been done, taken or granted under the corresponding provisions of these rules. SCHEDULE – I (See rule 10) Exceptions referred to in Rule 10 1- The following commodities may be sold by weight, measure or number as show against the commodity. TABLE --------------------------------------------------------------------------------------------------------------------- Sr. No. Commodity Whether declaration to be expressed in terms of weight, measure or number or two or more of them. -------------------------------------------------------------------------------------------------------------------- (1) (2) (3) -------------------------------------------------------------------------------------------------------------------- 1- Aerosol products weight 2- Acids in liquid form weight or Volume 3- Compressed or liquified weight and equivalent volume at stated temperature Gas (but not liquified and pressure Petroleum gas) 4- Butter (incl. peanut butter), weight Cheese, curd, ghee 5- Electric cables length or weight 6- Electric wire length or weight 7- Fencing wire length or weight 8- Hair oil, un-perfumed weight or volume 9- Fruits and vegetables number or weight 10- Furnace oil weight or volume 11- Linseed oil and other weight or volume vegetable oils 12- Heavy residual fuel oil weight 13- Industrial diesel fuel volume 14- Honey, malt extract, golden weight syrup treacle 15- Ice cream and other similar weight or volume frozen products 16- Liquid chemicals weight or volume 17- Liquid petroleum gas weight 18- Nails, wood screws number or weight 19- Paint (other than paste paints volume or solid paints), varnish and varnish stairs, enamels 20- Papad number and weight 21- Paste paint, solid paint weight 22- Ressogulla, Gulabjamun weight and other sweet preparations 23- Ready made garments number and size 24- Sauce, all kinds weight 25- Tyres and tubes number 26- Yarn Weight or length of yarn --------------------------------------------------------------------------------------------------------------------- SCHEDULE – II–A [See rule 11 (1)] Form – LM – 1 [Application form for licence as Manufacturer of weights & measures under the Legal Metrology Act, 2009] To, To be filled by the Comments of the Applicant inspection officer (1) (2) (3) 1. Name of the manufacturing concern for which licence .......................................... is desired. 2. Complete address of the concern. Whether premises ............................................ are owned/rented/taken on lease/leave licence, duly supported by documents. 3. Date of Establishment of workshop/factory. ....................................... 4. Name (s) and address (s) along with their father's/ .......................................... husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company 5. The date and current registration number of factory/ .................................... shop/ establishment/ Municipal Trade licence. 6. Nature of manufacturing activities at present. .......................................... 7. The type of weights and measures proposed to be ......................................... manufactured viz : (i) Weights (ii) Measures (iii) Weighing Instruments (iv) Measuring Instruments with details in each case. 8. The number of persons employed/proposed to be employed ........................... (i) Skilled (ii) Semi-skilled (iii) Unskilled (iv) Specialist trained in the line 9. The monogram or trade mark intended to be imprinted ....................................... on weights and measures to be manufactured. 10. Details of machinery, tools accessories, owned and ........................................... used for manufacturing weights measures etc. 11. Details of foundry/workshop facilities arranged. .......................................... Whether ownership, long term lease etc. 12. Facilities of steel casting and hardness testing of ....................................... Vital parts etc or other means. 13. Availability of electric energy. ........................................... 14. Details of loan received from Government or financial .............................................. Institution. If so, give details. 15. Name of bankers, if any. ............................................ 16. VAT/ Sales Tax Registration Number/CST Number/ ........................................ Professional Tax registration Number/IT Number. 17. Have you applied previously for a manufacturer's .............................................. licence? If so, when and with what results? 18. (a) Whether the item (s) proposed to be ..................................... manufactured will be sold within the State or out side the state or both. (b) Details of Model Approval received from Government of India; (c) When can you produce for inspection samples of your products for which licence is desired ? To be certified by the applicant (s) Certified that I/We have read the Legal Metrology Act, 2009 and the Delhi Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by the Licensing Authority. All the information furnished above is true to the best of my/our knowledge. Place : ................................... Date : Signature and Designation To be filled in by Departmental Officer of the Government of National Capital Territory of Delhi Date of Receipt of Application: Serial Number of application: Date of inspection: Recommendation of Inspecting Officer: Place: .................................. Date: Signature and Designation of Inspecting Officer Final orders of Licensing Authority Licence granted / refused: Licence Number: Valid till: Place: Date: Signature and Designation SCHEDULE – II-A [See rule 11 (1)] Form LR – 1 [Application for licence as Repairer of Weights & Measures under the Legal Metrology Act, 2009] To, To be filled by Comments of the the applicants inspecting officer 1 2 3 1. Name of the concern seeking the licence. .................................. 2. Complete address of the workshop. .................................. 3. (a) Whether premises are owned/rented/taken. on .................................. lease dully supported by documents. (b) Date of establishment. 4. Name (s) and address (s) along with their father's/ .................................. husband's name of proprietor (s) and/or Partners and Managing Director (s) in the case of Limited company. 5. Number and date of shop/establishment/current .................................. Municipal Trade Licence. 6. Professional Tax/IT Tax registration Number etc if any. .................................. 7. The type of weights and measures proposed to repaired. .................................. 8. Area in which you wish to operate. .................................. 9. Previous experience in the line. .................................. 10. Number of skilled staff employed or proposed to be .................................. employed: (i) Skilled (ii) Semi-skilled (iii) Unskilled (iv) Employees trained in the line 11. Details of machinery/tools/accessories available. .................................. 12. Availability of electric energy. .................................. 13. Have you sufficient stock of loan/test weights. etc.? .................................. Give details. 14. Have you applied previously for a repairer's licence? .................................. If so, When and with what results? To be certified by the applicant(s) Certified that I/We have read the Legal Metrology Act, 2009 and the Delhi Legal Metrology (Enforcement) Rules, 2011 and agree to abide by the same and also the administrative orders and instructions issued or to be issued there under. I/We agree to deposit the Scheduled licence fees with Government as soon as required to do so by the Licensing Authority. All the information furnished above is true to the best of my/our knowledge. Place: ................................... Date: Signature and Designation To be filled in by Departmental Officer of the Government of National Capital Territory of Delhi Date of Receipt of Application: Serial Number of Application: Date of Inspection : Recommendation of Inspecting Officer: Place: ................................... Date: Signature and Designation of Inspecting Officer Final orders of Licensing Authority Licence granted/refused: Licence Number: Valid till: Place: Date: Signature and Designation SCHEDULE – II–A [See rule 11 (1)]

Previous and next

All provisions of The Delhi Legal Metrology (Enforcement) Rules 2011

Questions people ask

Is rule 26 of the Delhi Legal Metrology (Enforcement) Rules 2011 still in force?

No repeal of the Delhi Legal Metrology (Enforcement) Rules 2011 is recorded.