Rule 17, The e-Waste (Management and Handling) Rules, 2010: Accident reporting and follow-up
The e-Waste (Management and Handling) Rules, 2010 - Rule 17
Text of rule 17
Accident reporting and follow-up
17. Accident reporting and follow-up.- where an accident occurs at the facility
processing e-waste or during transportation of e-waste, the producer, transporter,
dismantler, or recycler, as the case may be, shall report immediately to the State
Pollution Control Boards or Committees of Union territories about the accident.
18. The collection, storage, transportation, segregation, refurbishment,
dismantling, recycling and disposal of e-waste shall be in accordance with the
procedures prescribed in the guidelines published by the Central Pollution Control
Boards from time to time.
[Sm 11-- 3(ii)] O m a - d i l V f W : ~ . 37
SCHEDULE l
(see rules 2 (I), 3(j) and (k))
Categories of electrical and electronic equipment covered under the rules
~ r . 1 Categories of electrical and electronic equipment
Information technology and telecommunication equipment :
Centralised data processing:
Mainframes, Minicomputers
Personal computing:
Personal Computers (Central Processing Unit with input and output devices)
Laptop Computers(Central Processing Un$ with input and output devices)
Notebook Computers
Notepad Computers
Printers including cartridges
Copying equipment
Electrical and electronic typewriters
User terminals and systems
Facsimile
Telex I
Telephones
Pay telephones
Cordless telephones
Cellular telephones
Answering systems
SCHEDULE ll
[See rule 13(2)]
ii.
Applications, which are exempted from the requirements of sub-rule (1) of rule
13 (applicable to categories of electrical and electronic equipment as listed in
Schedule I) \
Consumer electrical and electronics:
Television sets (including sets based on (Liquid Crystal Display and Light Emitting
Diode technology), Refrigerator, Washing Machine, Air-conditioners excluding
centralised air,conditioning plants
1
1 (a)
l (b)
1 (c)
1 (d)
l(e)
1 (f)
2(a)
Exemption /
Mercury in single capped (compact) fluorescent lamps not exceeding (per
burner): $
For general lighting purposes < 30 W:5 mg
For general lighting purposes r 30 Wand < 50 W:5 mg
For general lighting purposes 2 50 W and < 150 ,W:5 mg
For general lighting purposes r 150 W: 1 5 mg
For general lighting purposes with circular or square structural shape and tube
diameter s 17 mm: 7mg
For'special purposes: 5 mg
Mercury in double-capped linear fluorescent lamps for general lighting purposes
38 THE GAZETTE OF INDIA : EXTRAORDINARY [PART 11-SEC. 3(ii)]
2(a)(l)
2(a)(2)
2(a)(3)
2(a)(4)
2(a)(5)
2(b)
2(b)(l)
2(b)(2)
2(b)(3)
2(b)(4)
3
3(a)
3(b)
3(c)
4(a)
4(b)
4(b)-I
4(b)-II
4(b)-Ill
4(c)
4(c)-I
4(c)- 11
4(c)-Ill
4(d)
4(e)
4(f)
5(a)
5(b)
6(a)
6(b)
6(c)
7 (a)
7(b)
7(c)- I
7(c)-ll
,
not exceeding (per lamp):
Tri-band phosphor with normal lifetime and a tube diameter > 9 mm (e.g. T2): 4
mg
Tri-band phosphor with normal lifetime and a tube diameter 2 9 mm and 2 17 mm
(e.g. T5): 3 mg
Tri-band phosphor with normal lifetime and a tube diameter > 17 mm and S 28
mm (e.g. T8): 3.5 mg
Tri-band phosphor with norrnat lifetime and a tube diameter > 28 mm (e.g. T12):
5 mg
Tri-band phosphor with long lifetime (2 25000 h): 8 mg
Mercury in other fluorescefit lamps not exceeding (per lamp):
Linear halopkosphalte lamps with tube > 28 mm (e.g T 10 and T12): 10 mg
Non- linear halophosphate lamps (all diameters): 15 mg
Non- linear tri-band phosphor lamps with tube diameter > 17 mm (e.g. T9):15 mg
Lamps for other general lighting and special purposes (e.g. induction lamps):
15mg.
Mercury in cold cathode fluorescent lamps and external electrode fluorescent
lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):
Short length (S 500 mm): 3.5mg
-
Medium length (> 500 mm and S 1500 mm): 5mg
Long length (> 1500 mm): 13mg
Mercury in other low pressure discharge lamps (per lamp)
Mercury in High Pressure Sodium (vapour) lamps for general lighting purposes
not exceeding (per burner) in lamps with improved colour rendering index
Ra>60: I
I
P S 155 W: 30mg I
155 W < P S 405 W: 40mg
P > 405 W: 40mg
Mercury In other High Pressure Sodium (vapour) lamps for general lighting
purposes not exceeding (per burner):
P S 155 W: 25mg
155 W eP4 405 W: 30mg
P> 405 W: 40mg
Mercury in High Pressure Mercury (vapour) lamps (HPMV)
Mercury in metal halide lamps (MH)
Mercury.in other discharge lamps for special purposes not specifically mentioned
in this Schedule
Lead in glass of cathode ray tubes
Lead in glass of fluorescent tubes not exceeding 0.2 % by weight -
Lead as an alloying element in steel for machining purposes and in galvanized
steel containing up to 0.35% lead by weight
Lead as an alloying element in aluminum containing up to 0.4%lead by weight
Copper alloy containing up to 4% lead by weight
Lead in high melting temperature type solders (i.e. Izad-based alloys containing
85% by weight or more lead)
Lead in solders for servers, storage and storage array systems, network
infrastructure equipment for switching, signaling, transmission, an3 network
management for telecommuni~ins
Electrical and electronic components containing lead in a glass or ceramic other
than dielectric ceramic incapacitors, e.g. piezoelectronic devices, or in a glass or
ceramic matrix compound.
Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V
DC,or higher -
C
[Tl 11-WS 3(ii)] om?rWGlTT:WrrW 39
-- - - - - - - - - - - - - - - -
7(c)-Ill Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V
ne
8(a)
8(b)
9
9(b)
11 (a)
1 1 (b)
12
13(a)
13(b)
14
semiconductor die and carrie; within integrated circuit flip chip packages.
Lead in linear incandescent lamps with silicate coated tubes
Lead halide as radiant agent in high intensity discharge (HID) lamps used for
W b
Cadmium and its compounds in one shot pellet type thermal cut-offs.
Cadmium and its compounds in electrical contacts
Hexavalent chromium as an anticorrosion agent of the carbon steel qooling
system in absorption refrigerators up to 0,75 % by weight in the cooling solution
Lead in bearing shells and bushes for refrigerant-containing compressors for
heating, ventilation, air conditioning and refrigeration (HVACR) application.
Lead used in C-press complaining pin connector systems
Lead used in other than C-press complaint pin connector systems
Lead as a coating material for the thermal conduction module C-ring
Lead in while glasses used for optical applications
Cadmium and lead in filter glasses and glasses used for reflectance standards.
, Lead in solders consisting of more than two elements for the connection between
15
professional reprography applications.
Lead as activator in the fluorescent powder (1 % lead by weight or less) of
the pins and the package of microprocessors with a lead content of more than
80% and less than 85% by weight
Lead in solders to com~lete a viable electrical connection between
discharge lamps when used as specialty lamps for diazoprinting reprography,
lithography, insect traps, photochemical and curing processes containing
phosphors such as SMS ((Sr, Ba)2MgSi207:Pb)
Lead as activator in the fluorescent powder (1 % lead by weight or less) of
discharge lamps when used as sun tanning lamps containing phosphors such as I
BSP (BaSi2OS:Pb)
Lead with PbBiSn-Hg and PblnSn-Hg in specific compositions as main amalgam
. . .
structural elements, notably in the seal frit and frii ring.
Lead oxide in the glass envelope of black light blue,lamps
Lead alloys as solder for transducers used in high- powered (designated to
operate for several hours at acoustic power levels of 125 dB SPL and above)
loudspeakers
Lead bound in crystal glass
Cadmium alloys as electricaVmechaqical solder joints to electrical conductors
located directly on the voice coil in transducers used in high-powered
loudspeakers with sound pressure levels of 100 dB (A) and more
Lead in soldering materials in mercurv free flat fluorescent lam~s(which e.a. are
and with PbSn-Hg as auxiliary amalgam 'in very compact energy saving lamps
(ESL)
Lead oxide in glass used for bonding front and rear substrates of flat fluorescent
lamps used for Liquid Crystal Displays (LCDs)
Lead and cadmium in printing inks for the application of enamels on glasses,
such as borosilicate and soda lime glasses
Lead in finishes of fine pitch components other than connectors with a pitch of
0.65 mm and less
Lead in solders for the soldering to machined through 'hole discoidal an planar
array ceramic multilayer capacitors
Lead Oxide in surface conduction electron emitter dis~lavs (SED) used in
- . . -
used for liquid crystal ,displays, design-or industrial lighting)
Lead oxide in seal frit used for making window assemblies for Argon and Krypton
.
laser tubes
40 THE GAZETTE OF INDL4 : EXTRAORDINARY [PART 11-SEC. 3(ii)]
33 1 Lead in solders for the soldering of thin copper wires of 100 pm diameter and I
( content up to 30 mg b r display
37 1 Lead in the plating layer of high voltage diodes on the basis of a zinc borate
34
36
less in power transformers
Lead in cermet-based trimmer potentiometer elements
Mercury used as a cathode sputtering inhibitor in DC plasma displays with a
SCHEDULE Ill
38
39
[See rule 14)]
LIST OF AUTHORITIES AND CORREPONDING DUTIES
I S I I AUTHORITY CORRESPONDING DUTIES
glass body
Cadmium and cadmium oxide in thick film pastes .used on aluminum bonded
beryllium oxide
Cadmium in colour converting Il-VI LEDs (e 10 pg Cd per mm2 of light-emitting
area) for use in solid state illumination or display systems.
Central Pollution
Control Board, Delhi
-. .
State Pollution Control
Boardsl Committees
of Union territories
(i) Coordination with State Pollution Control Boardsl
Committees of Union territories
(ii) Preparation of Guidelines for Environmentally Sound
Management of e-waste
(iii) Conduct assessment of e-waste generation and
processing
(iv) Recommend standards and specifications for
processing and recycling e-waste
(v) Documentation, compilation of data Qn e-waste and
uploading on websites of Central Pollution Control
Board
(vi) Conducting training & adareness programmes
(vii) Submit Annual Report to the Ministry
(viii) Any other function delegated by the Ministry under
these rules
(ix) Enforcement of provisions regarding reduction in use of
hazardous substances in manufacture of electrical and
electronic equipment
(x) Initiatives for IT industry for reducing hazardous
substances,
(xi) Set targets for compliance to the reduction in use of
hazardous substance in manufacture of electrical and
electronic equipment
(xii) Incentives and certification for green designlproducts
(i) lnventorization of e-waste.
(ii) Grant & renewal of Authorization
(iii) Registration of recyclers of e-waste
(iv) Monitoring compliance of authorization and registration
conditions
(v) Maintain information on the conditions imposed for
authorization etc.
(vi) Implementation of programmes to encourage
environmentally sound recycling
(vii) Action against violations of these rules
(viii) Any other function delegated by the Ministry under
these rules
[See rule 9(2)]
APPLICATION FOR OBTAINING AUTHORIZATION FOR GENERATION1
COLLECTION1 STORAGElDlSMANTLlNGlRECYCLlNGl OF E-WASTE*
From: ....................................
[~ 11-m 3(ii)] g m F 1 T 7 l W f : ~ 41
The Member Secretary,
- ,-
(Municipal
Committee/Council/
Corporation)
Pollution Control Board or .: ~ollution Control Committee ...-............. .......... ......
........................................................
........................................................
Sir,
Previous and next
All provisions of The e-Waste (Management and Handling) Rules, 2010
Questions people ask
Is rule 17 of the e-Waste (Management and Handling) Rules, 2010 still in force?
No repeal of the e-Waste (Management and Handling) Rules, 2010 is recorded.