LawGrids logoLAWGRIDS.ORG

Rule 2, Department of Technical education and Industrial Training(IT Wing) Rules 2001,2006,2009: Definitions

Department of Technical education and Industrial Training(IT Wing) Rules 2001,2006,2009 - Rule 2

Text of rule 2

Definitions

2. Definitions:- (1) In these rules, unless the context otherwise requires, - (a) ‗Appendix‘ means an appendix appended to thee rules; industrial training Punjab: (c) ‗ Government ‗ means the government of the state of Punjab in the department of technical education and industrial training: and (d) ‗Service‘ means the Punjab industrial training (class iii) technical service. (2) Unless otherwise provided in the rules. The expressions in the Punjab civil services (general and common conditions of service) rules,1994. 3. Number and characters of posts- The service shall comprise the posts shown in appendix ‗A‘: Provided that nothing in these rules shall affect the inherent right of the government to add to or Reduce the number of such posts or to create new posts with different designations and scales of pay. Whether permanently or temporarily. 4. Appointing authority- All appointments to the service shall be made by the director. 5. Qualifications, experience and method of appointment- (1) All appointments to the service shall be made in the manner specified in appendix- ‗B‘ . Provided that if. No suitable candidate is available for appointment by promotion and by direct appointment, as the case may be, then appointment to the service shall be made by transfer of a person holding similar or identical post under a state government or government of India. (2) No person shall be appointed to the service unless he possesses the qualifications and experience as specified in appendix- ‗B‘. (3) Appointment to the service by promotion shall be made on seniority –cum- merit basis. But no person shall have any right to claim promotion on the basis of seniority alone. (4) Whenever any vacancy in a post of the service occurs or is about to occur. The director shall determine by which manner the same shall be filled in. 6. Discipline ; punishment and appeal- (1) In the matters of discipline, punishment and appeal, the members of the service shall be governed by the Punjab civil services (punishment and appeal) rules,1970, as amended from time to time. (2) The authority empowered to impose penalties as specified in rule 5 of the Punjab civil service (punishment and appeal) rules. 1970, in respect of the members of the service4 shall respectively be the director and the government. 7.application of the Punjab civil services ( General and common conditions of service) rules, 1994-(1) . In respect of the matters which are not Specifically provided in these rules. The members of the service shall be governed by the provisions of the Punjab civil services ( General and common conditions of service) rules. 1994 as amended from time to time. (2) The Punjab civil services (general and common conditions of service) rules. 1994 for the time in force are contained in appendix ―C‖ 8. Interpretation- If any question arises to the Interpretation of these rules. The government shall decide the same. PUNJAB GOVT GAZ. , FEB .23 ,2001 (PHGN 4 , 1922 SAKA) APPENDIX ‘A’ (see rule (3) and 3) Seria l no. Designation of the posts Number of posts Scale of pay (in Rupees) Permanent Temporary total 1 Principal industrial training institute (women) (for the institutes running engineering trades). 2 3 5 7000-10980 2 Principal, industrial training (for women) (for the institutes running non- engineering trades). - 3 3 7000-10980 3 Superintendent (technical) industrial training institute. 2 2 4 6400-10640 4 Group instructor / mill wright Forman/ assistant apprenticeship advisor (junior). Industrial training institute/ surveyor / senior technical assistant / technical officer (h.q.)/ superintendent . industrial training institute formerly rural artisan training centers) / headmaster/headmistre 128 48 176 6400-10640 ss industrial training institute for women (running engineering trades)/industrial training institute for (schedule casts) 5 Headmaster/headmistr ess industrial training institute(for women) (institute running non engineering trades ) 20 6 26 6400-10640 6 CRAFT INSTRUCTORS (engineering trades industrial training institute, industrial training institute (women). Industrial training institute (formerly rural artisan training center) industrial training institute (for scheduled castes ), government industrial school for boys junior technical school specified as under- 5480-8925 5800-9200 (to the existing incumbents in the scale of 1800 as on a1-1-96 as a measure personal to them) i. Attendant operator instructor - 4 4 ii. Draughtsman civil instructor 23 17 40 iii. Draughtsman mechanical instructor 17 1 18 iv. Drawing instructor / draughtsman (mechanical) 53 24 77 v. Electrician instructor 70 20 99 vi. Electronic instructor 6 41 47 vii. Electroplater instructor 1 - 1 viii. Fitter instructor 76 4 80 ix. Instrument mechanical instructor 7 2 9 x. Laboratory assistant instructor - 4 4 xi. Math instructor 29 10 39 xii. Machinist (composite) instructor 54 1 55 Xiii. Machinist (grinder) instructor 8 - 8 xiv Mechanic Agriculture machinery instructor 6 8 14 xv. Motor mechanic instructor 56 9 65 xvi. Mill Wright instructor - 2 2 xvii. Painter (general) instructor / painter 2 2 4 xviii. Pattern maker instructor 2 - 2 xix. Radio and television instructor 44 12 56 xx. Refrigeration and air conditioning instructor 19 10 29 xxi. Surveyor instructor 18 4 22 xxii Tool and die maker instructor - 2 2 xxiii. Turner instructor 52 20 72 xxiv. Watch and clock repair instructor 4 - 4 xxv. Wireless mechanic- cum-operator instructor - 6 6 xxvi. Wireman instructor 20 11 31 xxvii . Allied trade instructor (mechanical electrical) 50 10 60 xxvii i. Leave reserve instructor 38 10 48 xxix. Boiler attendant instructor - 1 1 xxx. Carpenter instructor 27 - 27 xxxi. Computer instructor/ technical assistant (computer) 2 19 21 xxxii . Forger and heat treated instructor 6 - 6 xxiii. Hand composite and proof reading / letter press machine printing instructor 6 - 6 xxiv. Diesel mechanic instructor 9 6 15 xxxv . Tractor mechanic instructor 31 16 47 xxxv i. Moulder instructor 8 - 8 xxvii . Plastic processing operator instructor - 6 6 xxvii i. Plumber instructor 8 - 8 xxix. Pump mechanic instructor - 4 4 xl. Sheet metal instructor 4 - 4 xli. Welder instructor 36 12 48 xlii. Maintenance mechanic (mechanical) - 19 19 xliii. Maintenance mechanic (electrical) - 9 9 xliv. Technical assistant / 2 2 4 master craftsman xlv. Technical assistant government work center 1 - 1 xlvi. Desk top publishing instructor - - - Total 804 328 1132 7. INSTRUCTORS (non-engineering trades ) industrial training institute , industrial training institute (women) industrial institute (formely rural artisan training centers) . industrial training institute (for scheduled castes) , government industrial school for boys junior technical school government art and craft teacher training institute specified as under - 5480-8925 5800-9200 ( to the existing incumbents in the scale of 1800-3200 as on 1-1-96 as a measure personal to them) i. Dress making instructor - 9 9 ii. English stenography instructor 15 3 18 iii. Punjabi stenography instructor 32 41 73 iv. Hindi stenography instructor 4 2 6 v. Secretariat practice instructor - 6 6 vi. Bleaching dying and calico printing instructor 4 - 4 vii. Book binding instructor 2 - 2 viii. Cutting and tailoring instructor 127 8 135 ix. Embroidery instructor 78 4 82 x. Hair and skin instructor 3 2 5 xi. Knitting with hand machine instructor 4 - 4 xii. Photography instructor - 4 4 xiii. Preservation of fruit and vegetable instructor 4 - 4 xiv. Sports good (leather/wood) instructor 2 - 2 xv. Manufacture of footwear instructor 1 - 1 xvi. English teacher 12 6 18 xvii. Education mistress 7 1 8 xviii. Ivory inlay/lacquer turning instructor 2 - 2 xix. Instructor art and craft/ designer /drawing master. Government art and craft teacher training institute. Government industrial school (for boy). Industrial training institute (women) industrial training institute(schedule caste) 32 17 49 xx. Instructor mathematics and science. Junior technical school. 2 - 2 xxi. Instructor humanities / languages junior technical school 2 - 2 xxii. Instructor Punjabi junior technical school 1 - 1 xxiii. Instructor Hindi junior technical school 1 - 1 xxiv. Instructor social studies - - - total 335 103 438 8 VERNACULAR TEACHER , industrial training institute (scheduled castes) / language teacher , industrial training institute (women) 5 - 5 5000-8100 Serial no Designation of the posts Method of appointment Qualification and experience by Direct Appoin tment promotio n Direct Appointment promotion 1 2 3 4 1 Principal, industrial training institute (for women) (for the institute running engineering trades) Thirty – three percent Sixty- seven percent 1)should possess a degree in engineering or its equivalent from a recognized university or institution :and 2)should have an experience of working for a minimum period of three years in an organization registered under the factories act. 1948 or should have an experience of teaching for a minimum period of three years in a Government or recognized institute. Or 1)should possess a diploma in engineering or its equivalent from recognized university of institution :and 2)should have an experience of working for a minimum period of six years in an organization registered under the factories act. 1948 or should have an experience of teaching for a minimum period of six years in a government or an recognized institute. For amongst the superintendents (technical) having an experience of working as such for a minimum period of one year. Or From amongst the group instructor/ mill Wright for than / assistant apprenticeship advisor (junior) / surveyor / senior technical assistant / technical officer / superintendent / headmaster/ headmistress mentioned at Sr.no.4 of the appendix who have an experience of working as such for minimum period of five years . 2 Principal, industrial training institute (women) (for the institute running non engineering trades ) Thirty- three percent Sixty- seven percent 1)should possess B.Sc .(home science) or B.Sc./B.A. , B.ED. degree from recognized university or institution. 2)N.T.C. in one of the non-engineering trades and 3)should possess at least three years practical experience in an organization registered under the factories act. 1948 or three year teaching experience from a government or From amongst the headmaster /headmistress. Industrial training institute (for women) running non-engineering trades who have an experience of working as such for a minimum period of five year. recognized institute. 3 Superintendent (technical) , industrial training institute Hundred percent From amongst the group instructor /mill Wright Forman/ assistant apprenticeship advisor(junior), industrial training institute. Surveyor/senior technical assistant/ technical officer (H.Q.) superintendent industrial training institute (formerly rural artisan training center) / headmaster/head mistress, industrial training for women (running engineering trades)/ industrial training institute (for scheduled/casts) of the appendix. Who have an experience working as such for minimum period of three year. 4 Group instructor / mill Wright Forman /assistant apprenticeship advisor (junior). Industrial training institute . surveyor /senior technical assistant/ technical officer. Head quarter/ superintendent . Industrial training institute Thirty five percent Seventy five percent 1)should possess a degree in the relevant field of engineering or its equivalent from a recognized university or institute and 2)should possess at least one year teaching experience in a state government or institution recognized by the government. OR 1)should possess a diploma in engineering from a recognized university or institution and 2)should possess at least five year practical experience in an organization registered From amongst the craft instructor specified at sr.no.6 of the appendix ‘A’ who are matriculate and possesses diploma in engineering or national trade certificate/nationa l apprenticeship certificates in engineering trade and have an experience of working as such for a minimum period of five years . (formerly rural artisan training center) / headmistress/ headmasters industrial training institute for women (running engineering trades ). Industrial school for boys. Industrial training for (scheduled casts) under the factories act. 1948 or in a state government or institution recognized by the government which should include three years teaching experience. 5 Headmistress/ headmaster industrial training institute for women (institute running non engineering trades) Hundre d percent  From amongstthe instructors(non engineering trades ), industrial training institutes (for women ), industrial training institute (formerly artisans training center), industrial training institute (for scheduled casts), government industrial school for boys , junior technical school, government art and craft teachers training institutes specified at seial no. 7 of th appcndix ‘a’ who are matriculate and have an experience of working as such for aminimum period of fivf years. 6 Craft Instructor(Engi neering trades)industri al training institute industrial traning institute(wome n) industrial training institute (formerly Aural ArtisansTrainin g center’s) industrial Training institute (scheduled castes).govern ment industrjal school for boys, junior Technical school specified at serial no.6 of appendix ‘A’ IN THE following order namely i Attendant operator instructor Hundred percent (i). should posscs diploma in chemical engineering from a recognized university or institution and (ii) should possecss atleast two years . practical experience. In an organization rcgistered under the factories Act.1948 or atleast two year . teaching experience from a government or an institute recognized by the government or (i)should posscs national trade certificate/ national Apprenticeship certificate in attendant operator trade from national council for vocational training and (ii). Should have passed craft instructors training course from central training institute in attendant operator trade from national council for vocational training and (iii). Should posses atleast two year . practical experience in an organization registered under the factories act .. 1948 or atleast two years teaching experience in the time in a government institution or an institution recoganised by the government. Ii Draughtsman civil instructor Hundred percent (i). should posses diploma in civil engineering from a recognized university or or institution and (ii) should possess atleast two year practical experience. In an organization registered under the factories Act 1948 or atleast two years. Teaching experience in a government institution or an institution recognized by the government or (i) should possess national trade certificate/ national apprenticeship certificate in draughtsman Civil from national council for vocational training and (ii) should have passed craft instructors training course from central training institute/ advance training institute in draughtsman civil trade from vocational training. (iii) should possess atleast two years practical experience in the line in an organization registered under the factories act. 1948 or atleast two years. Teaching experience in a government institution or an institution recognized by the government (iii) Draughtsman (Mechanical) Instructor Hundred percent (i)Should posses diploma in mechanical engineering from a recognized university or institution and (ii). Should possess atleast two year. Practical experience. In an organization registered under the factories Act.1948 or atleast two years teaching experience in a government institution or an institution recognized by the government or (i) should possess national trade certificate/ national apprenticeship certificate in draughtsman mechanical trade from national council for vocational training and (ii) should have passed craft instructors training course from central training institute / advance training institute in draughtsman mechanical trade from national council for vocational training (iii). Should possess atleast two year practical experience in the line in an organization registered under the factories act. 1948 or an institution or an institution recognized by the government. iv. Drawing instructor/ draughtsman (mechanical). Junior technical school. Hundred percent (i). should posses diploma in mechanical engineering or production and industrial engineering from a recognized university or institution and (ii) should posses atleast two years practical experience in an organization registered under the factories Act 1948 or atleast two years teaching experience in the line in a government institution or an institution recognized . v Electrician instructor Hundred percent (i)should posses diploma in electrical engineering from a recognized or institution and (ii)should posses atleast two year practical experience ,in an organization registered under the factories Act 1948 or atleast two year .teaching experience in the line in a government institution or an institution recognized by the government or . (i)should posses national trade certificate /national apprenticeship certificate in electrician trade from national council for vocational training and (ii)should posses atleast two years practical experience in an organization registered under the factories Act 1948 or atleast two year teaching experience in the line in government institution or an institution recognized by the government vi Electronic instructor Hundred percent (i)should posses diploma in electronic engineering or diploma in electronic and communication engineering from a recognized university institution and (ii)should posses atleast two year practical experience ,in an organization registered under the factories Act 1948 oratleast two years teaching experience in the line a government institution or an institution recognized by the government or (i)should posses national trade certificate /national apprenticeship certificate in electronics trade from national council for vocational training and (ii)should have passed craft instructor training course from central training institute /advance training institute in electronic trade from national council for vocational training and (iii) should posses latest two year . practical experience in an organization registered under the factories Act 1948 or atleast two year teaching experience in the line in a government institution or an institution recognized by the government . vii Electroplater instructor Hundred percent (i)should posses diploma in chemical/metallur gy engineering from a recognized university or institution and (ii)should posses atleast two years practical experience in an organization registered under the factories act1948 or atleast two years teaching experience in as 118 PUNJAB GOVT GAZ., FEB. 23, 2001 (PHGN 4 , 1922 SAKA) 1 2 3 4 Government Institution Or an Institution Recognized by the Government Or (i)Should possess National Trade Certificate National Apprenticeship Certificate in Electroplater Instructor Trade from National Council for Vocational Training . and (ii)Should have Passed Craft instructor Training course from Central Training Institute Advance Training Institute in Electroplater Trade From National Council For Vocational Training. and (iii)Should possess Atleast two years. Practical experience in The line in a Government Institution Or an Institution Recognized by the Government. Viii Fitter Instructor Hundred percent (i)Should Posses Diploma in Mechanical Engineering from a Recognized university Or Institution: and (ii)Should posses Atleast two years. Practical experience in An organization Registered under the Factories Act 1948 or Atleast two years Teaching experience in a Government Institution Or an Institution Recognized by the Government or 119 PUNJAB GOVT GAZ ., FEB. 23, 2001 (PHGN 4 , 1922 SAKA) 1 2 3 4 (i)Should Possess National Trade Certificate/ National Apprenticeship Certificate in Fitter Trade From National Council For Vocational Training and (ii)Should ha ve Passed Craft Instructors Training Course from Central Training Institute / Advance Training Institute In Fitter Trade from National Council for Vocational Training : and (iii)Should Possess Atleast Two Years. Practical experience in An Organisation Registered under The Factories Act 1948 or Atleast Two Years. Teaching experience in The Line in a Government Institution Or an Institution Recognized By The Government Ix Insirument Machanic Instructor Hundred Percent (i)Should Posses Diploma In Mechanical Engineering or Diploma In Instrument Technology From a Recognized University Or Institution: and (ii)Should Possess Atleast Two Years. Practical experience in An Organisation Registered Under the Factories Act 1948 or Atleast two Years. Teaching experience in a Government Institution or an institution recognized by the Government. or 120 PUNJAB GOVT GAZ . , FEB. 23, 2001 (PHGN 4, 1922 SAKA) 1 2 3 4 (i)Should possess National Trade Certificate/ National Apprenticeship Certificate in Mechanic Trade from National Council for Vocational Training: (ii)Should have Passed Craft Instructor Training Cource from Central Training Institute/ Advance Training Institute in Mechanic Trade from National Council for Vocational Training: and (iii)Should Possess Atleast two years. Practical experience in An organization Registered under the Factories Act.1948 or Atleast two years. Teaching experience in The line in a Government Institution Or an Institution Recognized by the Government. x. Laboratory Assistant Instructor Hundred Percent (i)Should possess Diploma in Chemical Engineering from a Recognized university Or Institution: and (ii)Should possess Atleast two years Practical experience in An organization Rcgistered under the Factories Act 1948 or Atleast two years. Practical experience in An organization Registered under the Factories Act 1948 or Atleast two years. Teaching experience in A Government Institution or an Institution recognized By the Government or 121 PUNJAB GOVT GAZ , FEB . 23 , 2001 (i) Should prossec national trade certificate/ national apprenticeship certificate in laboratory assiatant trade from national council for vocational training and (ii) Should have passed craft instructors training course from central training institute in laboratory assistant trade from national council for vocational training and (iii) Should prossess atlest two years. Practical experience in an origanisation regisitered under the factories act 1948 or atiest two years. Teaching experience in the line in a government institution or an institution recoganised by the government . (xi) Math instructor Hundred precent - (i) Should posses diploma in engineering from a recoganised university or institution : and (ii) Should posses atiest two years. Practical experience . in an organisation registered under the factories act . 1948 or should possess atleast two years teaching experience in a government instruction recognized by the government . (xii) machinist (composite) instructor Hundred percent - (i) Should posses diploma in mechanical engineering from a recoganised university or institution: and (ii) Should posses atiest two years. 122 PUNJAB GOVT GAZ . , FEB . 23, 2001 Practical experience. in an organization registered under the factories act . 1948 or artiest two years . teaching experience in a government instruction recognized by the government . Or (i) Should posses national trade certificate/ national apprenticeship certificate in machinist composite trade from national council for vocational training and (i) Should have passed craft instructors training course from central training institute/ advance training institute in machinist composite trade from national council for vocational training and (ii) Should posses atiest –two years , pratical experience in registered under the factories act , 1948 or atlest two years .teaching experience in the in a government institution recognized by the government. (xiii) machinist (grinder) instructor Hundred percent - (I) Should posses diploma in mechanical engineering from a recoganised university or institution and (ii) Should possess atleast two years .practical experience. In an organisation registered under the 123 PUNJAB GOVT GAZ. , FEB. 23 , 2001 Factories act 1948 or atleast two years . teaching experience in a government institution or an institution recoganised by the government. or (iii) Should possess national trade certificate / national council for vocational training : and (i) Should have passed craft instructors training institute / advance training institute in machinist grinder trade from national council for vocational training and (ii) Should possess atieast two years practical experience in an organisation registered under the factories act 1948 or atiest two yers . teaching experience in the line in a gonernment instituton or an institution recoganised by the government . (xiv) mechanic agriculture machinery instructor Hunderd percent - (i) Should possess diploma in mechanical engineering from a recoganised university or institution : and (ii) Should posses atleast two years. Practical experience . in an organisation registered under the factories act . 1948 or atleast two years. Teaching experience in a 124 PUNJAB GOVT GAZ . , FEB . 23. 2001 1 2 3 4 Government institute or an instruction recoganised by the government . Or (i)Should posses national trade certificate / national apprenticeship certificate in mechanic agriculture mechaniery or farm mechanic trade from national council for vocational training : and (ii)Should have passed craft instructors training course from central training institute / advance training institute in mechanic agriculture mechinary or farm mechanic trade from national council for vocational training and (iii)Shold posses atieast two years practical experience in an organisation registered under the faclories act . 1948 or atleast two year teaching experience in the line in a government institution or an institution recoganised by the government . must possess driving licence for heavy vehicle driving. (xv) mechanic motor instructor Hunderd percent - (i)should posses diploma in mechanical/ automobile engineering from a recoganised university or institution : and (ii)should posses atleast two years . practical experience , in an organisation 125 PUNJAB GOVT GAZ . , FEB . 23. 2001 Registered under the factories act. 1948 or atleast two years. Teaching experience in a government institution or an institution recoganised by the government. Or (i)should posses national trade certificate /national apprenticeship certificate in motor mechanic trade from national council for vocational training (ii)should have passed craft instructor training course from cental training institute/ advance training institute in motor mechanic trade from national council for vocational training: and (iii)should posses atleast two years experience in an organization registered under the factories act. 1948 or atleast two years. Teaching experience in the line in a government institution or an institution recognized by the government. Must posses driving license for vehicle driving. (xvi) mill wright instructor Hundred percent - (i)should posses diploma in mechanical engineering from a recogenised university or institution . and (ii)should posses atleast two years practical experience in the organization registerd under the 126 PUNJAB GOVT GAZ . , FEB . 23. 2001 Factories act. 1948 or atieast two years. Teaching experience in a government institution or an institution recoganised by the government. Or (i)Should posses national trade certificate / national apprenticeship certificate in mail wright trads from national council for vocational training (II)should have passed craft instructors training course from central training institute/advance training institute in mill wright trade from national council for vocational training : and (iii)should posses atleast two years. Practical experience in an organization registered under the factories act. 1948 or atleast two years. Teaching experience in the line in a government institution or an institution recoganised by in the government (xvii) painter (genral) instructor/painter Hunderd percent - (i) Should posses diploma in appropriate branch of technology from a recoganise d university or institution : and (ii) Should posssess atleast two years. Practical experience in an organisatio n registered under the factories act. 1948 or atleast two years. Teaching experience in an 127 PUNJAB GOVT GAZ . , FEB . 23. 2001 Government institution or an institution reorganized by the government . or (i)should posses national trade certificate /national apprenticeship certificate in painter (gernal) trade from national council for vocational training (ii)should have passed craft instructor training course from centeral training institute /advance training institute in painter (gernal) trade from national council for vocational traninig and (iii)should posses atleast two year practical experience in an organization registered under the factories act. 1948 or atleast two years teaching experience in the line in a government institution or an institution reorganized by the government . (xvii) pattern marker instructer Hundred percent (i)should posses diploma in approtriate branch of technology from a reorganized university or instruction and (ii)should posses atleast two years practical experience in an organization registerd under the factories act. 1948 or atleast two year teaching experience in a government institution or an institution 128 PUNJAB GOVT GAZ., FEB. 23, 2003 (PHGN 4, 1992 SAKA) Recognized by the government Or (I) should possess national trade certificate / national apprenticeship certificate in pattern maker trade from national council for vocational training ; (ii) Should have passed craft instructors training course from central training institute/ advance training institute in pattern maker trade from national council for vocational training. (iii) Should possess at least two years. Practical experience in an organization registered under the factories act. 1948 or at least two years. Teaching experience in the line in a government institution or an institution or an institution recognized by the government. Xix Radio and television instructor Hundred percent (I) should possess diploma in electronic engineering or diploma in electronic and television engineering / technology from a recognized university or institution ; and (ii) Should possess at least two years. Practical experience in an organization registers under the factories act. 1948 or at least two years teaching experience in a government institution or an institution. Recognized by the government Or (I)should possess national trade certificate/ national apprenticeship certificate in radio and television trade from national council for national training : (ii)should have passed craft instructors training course from central training institute/ advance training institute in radio and television trade from national council for vocational: and (iii) Should possess at least two years. Practical experience in an organization registered under the factories act 1948 or at least two years teaching experience in the line in a government institution or an institution recognized by the government. Xx Refrigeration and Air conditioning instructor Hundred percent (I) should possess diploma in mechanical engineering (with specialization in refrigeration and air conditioning )from a recognized university or institution ;and (ii) should possess at least two years practical experience in an organization registered under the factories act 1948 or at least two years teaching experience in a government institution or an institution recognized by the government or (I)should possess national trade certificate/ national apprenticeship certificate in air refrigeration and air conditioning trade from national council for vocational training (ii)should have passed craft instructors training course from central training institute /advance training institute in refrigeration and air conditioning trade from national council for vocational training :and (iii) should possess at least two years practical experience in an organization registered under the factories act 1948 or at least two years teaching experience in the line in a government institution or an institution recognized by the government ; Xxi Surveyor Instructor Hundred percent (I) should possess diploma in civil engineering from a recognized university or institution: and (ii) Should posses at least two years .Practical experience. In an organization registered under the factories Act.1948 or at least two years. Teaching experience in a government institution or an institution recognized by the government. Or (i) should posses National Trade certificate/ National apprenticeship certificate in surveyor trade from national council for vocational training: (ii) should have passed craft instructors training course from central training institute in surveyor trade from national council for vocational training : and (iii) should posses at least two years .Practical experience in an organisation registered under the factories Act. 1948 or at least two years. Teaching experience in the line in a government institution or an institution recognised by the government. xxii. Tool and Die Maker Instructor Hundred percentage (i) should posses Diploma in mechanical engineering or diploma in machine tool and die making engineering from a recognised university or institute: and (ii) should posses at least two years. Practical experience . in an organisation registered under the Factories Act. 1948 or at least two years . teaching experience in a government institution or an institution recognised by the government. Or (i) should posses National Trade certificate National Apprenticeship certificate in tool and die maker trade from national council for vocational training . (ii) should have passed craft instructors training course from central training institute/ Advance training institute in tool and die marker trade from national council for vocational training :and (iii) should posses at least two years. Practical experience in an organisation registered under the factories 1948 or at least two years. Teaching experience in the line in a government institution or an institution recognised by the government xxiii. turner instructor Hundred percent (i) should posses diploma in mechanical Engineering from a recognised university or institution :and (ii) should posses at least two years. Practical experience ,in an organisation registered under the Factories Act .1948 or at least two year .teaching experience in a government institution or an institution recognised by the government. Or (i) should possess National trade certificate/National apprenticeship certificate in turner trade from national council for vocational training : (ii) should have passed craft instructors training course from central training institute /Advance Training Institute in watch and clock repair trade from national council for vocational training : and (iii) should posses at least two years. Practical experience in an organisation registered under the factories act. 1948 or atleast two years .teaching experience in the line in a government institution or an institution recognised by the government . xxv. wireless mechanic-cum operator instructor Hundred percent (i)should possess diploma in electronic and communication engineering from a recognised university or institution :and (ii)should possess at least two years practical experience in an orgnisation registered under the factories act 1948 or at least two years teaching experiencxe in a government institution recognised by the government. Or (i) should possess national trade certificate/ national apprenticeship certificate in wireless mechanic- cum- operator trade from national council for vocational training and (ii) should have passed craft instructors training course for central training institute/ advance training institute in wirless mechanic-cum- operator trade from national council for vocational training :and (iii) should posses at least two years practical experience in an organisation registered under the factories act 1948 or atleast two years teaching experience in the line in a government institution or an institution recognised by the government . Xxvi Wireman instructor Hundred percent (i) should possess diploma in electrical engineering from a recognised university or institution : and (ii) should possess at least two years practical experience in an organisation registered under the factories act 1948 or at least two years teaching experience in a government institution or an institution recognised by the government . Or (i) should possess national certificate/ national apprenticeship certificate in wireman trade from national council for vocational training (ii) should have passed craft instructor training course from central training institute/ advanced training institute in wireman trade from national council for vocational training and (iii) should possess at least two years practical experience in an organisation registered under the factories act 1948 or at least two years teaching experience in the line in a government institution or an institution recognised by the government . Xxvii Allied trade instructor (mechanical/electrical) Hundred percent (i) should possess diploma in mechanical/ electrical engineering from a recognised university or institution and (ii) should possess at least two years experience. in an organisation registered under the factories act 1948 or at least two years teaching experience in a government institution or an institution recognised by the government Xxviii Leave reserve instructor Hundred percent (i) should possess diploma in concerned branch of engineering from a recognised university or institution and (ii) should possess at least two years practical experience in an organisation registered under the factories act 1948 . or at least two years teaching experience in a government institution or an institution recognised by the government Or (i) should posses national trade certificate/ national apprenticeship certificate in concerned trade from national council for vocational training. (ii) should have passedcraft instructors training course from central training institute/ Advance training institute in concerned trade from national council for vocational training and . (iii)Should posses atleast two years practical experience in an organisation registered under the factories act 1948 or atleast two years teaching experience in the line in a government institution or an institution recognised by the government xxix Boiler attendant instructor Hundred percent (i)should posses diploma in mechanical engineering with “a”grade proficiency certificate from director of boiler (chief inspector of boiler ) and (ii)should posses atleast two years practical experience in an organisation registered under the factories Act 1948 or atleast two years teachimg experience in a government institution PUNJAB GOVT GAZ., FEB. 23, 2001 138 1 2 3 4 5 Or an institution recognized by the government after acquiring “B” Grade Certificate Or (I) should posses national Trade Certificate/ national apprenticeship certificate in boiler attendant trade from national council for vocational training. (ii) should possess “A” grade proficiency Certificate from director of boilers (chief inspector of boilers); and (iii) Should possess at least two years. Practical experience in an organization registered under the factories Act.1948 or at least two years. Teaching experience in the line in a government institution or an institution recognized by the government after acquiring “B” grade certificate. xxx. Carpenter instructor. Hundred percent (I) should possess diploma in wood work from a recognized university or institution : and (ii) Should possess at least two years. Practical experience. In an organization registered under the factories act. 1948 or at least two years. Teaching experience in a government institution or an institution recognized by the Government. Or (I)should posses national trade Certificate/ National Apprenticeship Certificate in Carpenter Trade From national Council for Vocational training. (ii) should have passed Craft instructor Training institute course-from Central training institute/ Advance training institute in Carpenter Trade from national Council for Vocational Training and (iii) Should posses at least three years. Practical experience in an organization registered under the factices act.1948 or at least three years. Teaching experience in the line in a Government institution or an institution recognized by the Government xxxi computer Instructor/ Technical Assistant(computer) Hundred Percent (I) should posses Degree in computer Applicant from a recognized University or Institution and (I) should posses Diploma in Computer Applicant from a recognized University or institute: and (I) should posses at least two years. Practical experience in an organization registered under the factories act 1948 or at least two years. Teaching experience in a Government Institution or an Institution Recognized by the Government. or (I) should posses post diploma in computer Applications from a government of any recognized Institute: (ii) Should posses at least two years. Practical experience from a Concern registered under the factories act 1948. Or two years teaching experience in a Government institution or an institution recognized by the government. Or (I) Diploma in Computer Engineering from a Government or any recognized institute : and (ii)should posses at least two years practical experience in a organization registers under the factories Act1948 or at least two years teaching experience in the line in a government institution or an institution recognized by the Government Xxxii Forger and heat Traitor instructor Hundred percent (I) should posses Diploma in Mechanical Engineering or advanced Diploma in forging Technology from a recognized university or institution. and (ii) should posses at least two years practical experience in an organization registered under the factories Act 1948 or at least two years teaching experience in a Government institution or an institution recognized by the government Or (I)should posses National Trade Certificate/Nationa l Apprenticeship Certificate in Forger and Heat Treated / Black Smith trade from National Council for Vocational trraining:and (ii)should have passed Craft Instructor training Course from Central Training institute / Advance training in forger and Heat Treated Trade from Notational Council for vocational training :and (ii) Should posses at least three years teaching experience in an organisation registered under the factories act 1948 or at least three years teaching experience in the line in a Government institution or an institution recognized by the Government. (I)should posses Diploma in Printing technology and Allied Technology /Engineering from a recognized university or institution :and (ii) Should posses at least two years practical experience in an organisation registered under the factories Act 1948 or at least two years teaching experience in a G government or an institution recognized by the Government. Or (I)should posses Notational Trade Certificate /National apprenticeship Certificate in Hand Composite /Letter Press Machine Minder Trade from National council for National Council for Vocationa Training (ii) should have passed Craft instructor Central training course from Central training institute/Advance training institute in Hand Composite/letter Press machine minder Trade From National council for vocational Training and (iii) Should posses at least three years. Practical experience in an organization registered under the factories Act1948 or at least three years. Teaching experience in the line in a Government institution or in institution recognized by the Government. xxiv Diesel Mechanic Instructor Hundred Percent (I)should posses Diploma in Mechanical /Automobiles engineering from recognized university or institution and (ii) Should posses at least two years Practical Experience in an organization registered under the factories act 1948 or at least two years teaching experience in a Government institution or an institution recognized by the Government. Or (I) should posses National Trade Certificate /National Apprenticeship Certificate in Mechanic Diesel Trade from national Council for Vocational Training (ii) should have passed Craft Instructors Training Course from Central Training institute /Advance Training institute in Mechanic Diesel Trade for National Council For Vocational Training and (I) should posses at least three years Practical Experience in an organization registered under the factories Act 1948 or at least three years teaching Experience in line in a Government Institute or an institution recognized by the Government. Must posses driving license for heavy vehicle driving Xxxv Tractor Mechanic Instructor Hundred Percent (ii) Should posses diploma in mechanical automobile Engineering from a recognized university or institution; and (ii) Should posses at least two years, practical experience in an Organization registered under the factories act. 1948 at least two years. Teaching experience in a Government institution recognized by the Government . Or (I) should possess national trade certificate/ national apprenticeship certificate in mechanic tractor trade from national council for vocational training. (ii) should have passed craft instructions training course from central training institute / advance training institute in mechanic tractor trade from national council for vocational training ; and (iii) Should possess at least three years. Practical experience in an organization registered under the factories act. 1948 or at least three year’s .teaching experience in the line in a government institution or an institution recognized by the government. Must possess driving license for heavy vehicle driving. Xxxvi Moulder instructor Hundred percent (I) should possess diploma in mechanical engineering or advance diploma in foundry technology from a recognized university or institution. and (ii) Should possess at least two years. Practical experience in an organization under the factories act. 1948 or at least two years. Teaching experience in a government institution recognized by the government. Or (I) should possess national trade certificate/ national apprenticeship certificate in molder trade from national council for vocational training ; (ii) should have passed craft instructors training course from central training institute / advance training institute in molder trade from national council for vocational training and (iii) Should possess at least three years practical experience in an organization registered under factories act. 1948 or at least three years teaching experience in the line in a government institution or an institution recognized by the government Xxxvii Plastic processing operator instructor Hundred percent (I) Should possess diploma in mechanical engineering / three years diploma in plastic technology from a recognized university or institution and : (ii) Should possess at least two years. Practical experience in an organization registered under the factory act. 1948 or at least two years. Etching experience in a government institution or an institution recognized by the government Or (I) should possess national trade certificate/ national apprenticeship certificate in plastic processing operator trade from national council for vocational training. (ii)should have passed craft instructors training course from central training institute / advanced training institute in plastic processing operator trade from national council for vocational training ; and (iii) Should possess at least three years, practical experience in an organization registered under the factories act. 1948 or at least three years teaching experience in the line in a government institution or an institution recognized by the Government. Xxxvii Plumber instructor Hundred percent (I) should possess Diploma in mechanical/ Civil engineering from a recognized university or institution ; and (ii) Should possess at least two years, practical experience in an organization registered under the factory act. 1948 at least two years, teaching experience in a government institution or an institution recognized by the government. Or (I) should possess national trade certificate/ national apprenticeship certificate in plumber in trade from national council for vocational training ; (ii) should have passed craft instructors training course from central training institute/ advanced training institute in plumber trade from national council for national training ;and (iii) Should possess at least three years practical experience in an organization registered under the factories act. 1948 or at least three years. Teaching experience in the line in a government institution or an institution recognized by the Government. Xxxiii Hand composite / letter press machine minder instructor Hundred percent (I) should possess diploma in printing technology and allied technology / engineering from a recognized university or institution ; and (ii) Should possess at least two years practical experience in an organization registered under the factories act. 1948 or at least two years teaching experience in a government institution or an institution recognized by the government Or (I) should possess national trade certificate / national apprenticeship certificate in an hand composite / letter press machine minder trade from national council for vocational training (ii) should have passed craft instructors training course from central training institute / advance training institute in hand composite/ letter press machine minder trade from national council for vocational training and (iii) Should possess at least three years practical experience in an organization register under the factories act .1948 or at least three years teaching experience in the line in a government institution or an institution recognized by the government. (PHGN 4, 1922 SAKA) 148 PUNJAB GOVT GAZ., FEB .23 .2001 (PHGN .4 1922 SAKA) 1 2 3 4 xxxix. pump mechanic instructor hundred percent (i) should posses diploma in mechanical/automobile engineering from a recognized university or institution and (ii) should posses at least two year . practical experience in an organization registered under the factories Act1948 or at least two years teaching experience in a government institution or an institution recognized by the government or (i)should posses national trade certificate /national apprenticeship certificate in pump mechanic trade from national council for vocational training (ii) should have passed craft instructor training course from central training institute / advance training institute in pump mechanic trade from national council for vocational training and (iii) should posses atleast three years practical experience in an organisation registered under the factories act 1948 or atleast three years. teaching experience in the line in a government institution or an institution recognized by the government 149 PUNJAB GOVT GAZ .,.FEB .23 ,2001 (PHGN 4,1922 SAKA) 1 2 3 4 xl sheet metal instructor hundred percent (i) should posses diploma in mechanical engineering from a recognized university or institution and (ii) should posses atleast two years .practical experience in an organisation registered under the factories Act 1948 or atleast two years .teaching experience in a government institution or an institution recognized by the government Or (i) should posses national trade certificate /national apprenticeship certificate in sheet metal trade from national council for vocational training (ii) should have passed craft instructor training course from central training institute/advance training institute in sheet metal trade from national council for vocational training and (iii) should posses atleast three years practical experience in an organisation registered under the factories Act1948 or atleast three years .teaching experience in the line in a government institution or an institution recognized by the government 150 PUNJAB GOVT GAZ., FEB.23 2001 (PHGN .4 1922 SAKA) 1 2 3 4 xli welder intructor hundred percent (i) should posses diploma in mechanical engineering from a recognized university or institution and (ii)should posses atleast two years ,practical experience in an organisation registered under the factories act 1948 or atleast two years ,teaching experience in a government institution or an institution recognized by the government .Or (i) should posses national trade certificate /national apprenticeship certificate in welder trade from national council for vocational training (ii) should have passed craft instructors training course from central training institute /advance training in welder trade from national council for vocational training .and (iii) should posses atleast three years .practical experience in an organisation registered under the factories Act 1948 or atleast three years. Teaching experience in the line in a government institution or an institution recognized by the government . 151 PUNJAB GOVT GAZ., FEB.23 2001 (PHGN .4 1922 SAKA) 1 2 3 4 xlii maintenance mechanic (mechanical hundred percent (i)should posses diploma in mechanical engineering from recognized university or institution and (ii) Should posses atleast two years, practical experience .from an organisation under the factories Act 1948. xliii maintenance mechanic (electrical) hundred percent (i) should posses diploma in electrical engineering from recognized university or institution and (ii)should posses atleast two years ,practical experience, from an organisation under the factories Act,1948. xliv technical assistant /master craftman hundred percent (i) should posses diploma in engineering from recognized university or institution and (ii) should posses two years practical experience .from an organisation under the factories Act 1948 or atleast two years teaching experience in government institution or an institution recognized by the government . xiv technical assistant government work center,rajpura hundred percent (i) should posses diploma in mechanical/ production & industrial engineering from recognized university or institution and (ii)should posses two years practical experience, from an organisation under the factories Act 1948 152 PUNJAB GOVT GAZ., FEB.23 2001 (PHGN .4 1922 SAKA) 1 2 3 4 xlvi desk top publishing instructor hundred percent (i)should posses diploma in computer application or post diploma in computer engineering university or institution and (ii)should posses atleast three months course in desk top publishing from government institution or an institution by the government and (iii)should posses typing speed of 30 W.P.M in Punjabi language and (iv)should posses atleast two years practical experience in an organisation registered under the factories Act 1948 or two years teaching experience from a government institution or an institution recognized by the government 7 INSTRUCTOR (NON-ENGINEERING TRADES) industrial training institute industrial training institute (women) industrial training institute (formerly rural artisans training centers ) industrial training institute (for scheduled castes) government industrial school for boys .junior technical school. government art and craft teacher training institute specified at serial no.7 of appendix 'a' in the following order namely:- 153 GOVT G AZ., FEB.23 2001 PUNJAB (PHGN .4 1922 SAKA) 1 2 3 4 i dress making instructor hundred percent (i)should posses diploma in fashion technology or diploma in costume designing and dress making from a recognized university or institution and (ii) should posses atleast two years practical experience in an organisation registered under the factories Act 1948 or atleast two years .teaching experience from a government institution or an institution recognized by the government OR (i)should posses national trade certificate /national apprenticeship certificate in dress making trade from national council for vocational training (ii)should have passed craft instructor training course from central training institute in dress making trade from national council for vocational training and (iii) should posses three years practical experience in an organisation registered under the factories Act 1948 or atleast three years .teaching experience in the line in a government institution recognized by the government . 154 PUNJAB GOVT GAZ., FEB.23 2001 (PHGN .4 1922 SAKA) 1 2 3 4 ii English stenography instructor hundred (i) should be metric 2nd class or 10+2 or its equivalent from a recognized university or institute (ii) should possess national trade certificates in English stenography from national council for vocational training and (iii) should possess atleast five years experience as stenographer; (iv) should posses speed of 120 W.P.M in shorthand 40 W.P.M in English typing to be tested; and (v) should posses good knowledge of English and proficiency in language iii Punjabi stenography instructor hundred percent (i) should be metric 2nd class or 10+2 or equivalent from a recognized university or institution (ii) should possess state trade certificate in Punjabi stenography from state council for vocational training (iii) should possess atleast five years experience as stenographer (iv) should possess speed of 120 W.P.M in shorthanded 40 W.P.M in Punjabi typing and (v) should possess good knowledge of Punjabi and proficiency in language 155 PUNJAB GOVT GAZ., FEB.23 2001 (PHGN .4 1922 SAKA) 1 2 3 4 iv Hindi stenography instructor hundred percent (i) should be metric 2nd class or 10+2 or its equivalent from a recognized university or (ii) should possess national trade certificates in Hindi stenography from national council for vocational training (iii) should possess atleast five years experience as stenographer (iv) should possess speed of 120 W.P.M in Hindi typing ( to be tested ): and (v) should possess good knowledge of Hindi and proficiency in language v secretarial practices instructor hundred percent (i) should be B.A (with English as one of elective subject) B.ED from a recognized university or institute and (ii) should possess national trade certificate in secretarial practice with one year practical experience in an organisation registered under factories Act. 1948 or should possess atleast one year teaching experience from a government institution or an institution recognized by the government or (i) should possess in commercial practice & stenography (English) or diploma in modern office practice with four years. practical experience in an organisation registered under factories Act. 1948 or atleast four years teaching experience in the line in a government institution recognized by the government . (ii) speed in English stenography ,shorthand 100.30 15 W.P.M ( to be tested) 156 PUNJAB GOVT GAZ., FEB.23 2001 (PHGN .4 1922 SAKA) 1 2 3 4 VI bleaching dyeing and calico printing instructor hundred percent (i) should possess diploma in textile chemistry from a recognized university or institution and (ii) should possess atleast two years practical experience in an organisation registered under the factories act 1948 or atleast two years teaching experience from a government or an institute recognized by the government or (i) should possess national trade certificate / national apprenticeship certificate in bleaching dyeing and calico printing trade from national council for vocational training and (ii) should have passed craft instructors training course from central training institute/ advance training institute in bleaching dyeing and calico printing trade from national council for vocational training and (iii_ should possess three years practical experience in an organisation registered under the factories act 1948 or atleast three years teaching experience in the line in a government institution or an institution recognized by the government 157 PUNJAB GOVT GAZ., FEB.23 2001 (PHGN .4 1922 SAKA) 1 2 3 4 vii book binding instructor hundred percent (i) should possess diploma in appropriate branch of technology from a recognized university or institution and (ii) should possess at least two years practical experience in an organization registered under the factories act 1948 or at least two years teaching experience from a government or an institute recognize by the government or (i) should possess national trade certificate / national apprenticeship certificate in book binding trade from national council for vocational training (ii) should have passed craft instructor training course for central training / advance training institute in book binding trade from national council for vocational training (iii) should possess three years practical experience in ans 158 PUNJAB GOVT GAZ., FEB, 23, 2001 (PHGN 4, 1992 SAKA) 1 2 3 4 5 Organization registered under the Factories Act. Years, teaching experience in the line in a government institution or an institution recognized by the government. viii. Cutting and tailoring Instructor Hindered percent (I) should process Diploma in fashion Design Technology or diploma in costume Design and dress making from a recognized university or institution :and (ii) Should process at least two years. Practical experience in an organization registered under the Factories Act. 1948 or at least two years teaching experience from a government or an institute recognized by the government. Or (I) should posses national trade certificate / National Apprenticeship certificate in cutting & Tailoring and Embroidery trades from National council for vocational Training ; (ii) should have passed craft instructors Training course from central Training institute / Advance Training institute or teacher training course from industrial training institute in Punjab in cutting & Tailoring And Embroidery trade and 159 PUNJAB GOVT GAZ., FEB. 23 , 2001 (PHGN 4, 1922 SAKA) 1 2 3 4 (iii) Should posses at least two years .Practical experience in an organization registered under the Factories act. 1948 or at least two years. Teaching experience in the line in a government Institution or an institution recognized by the government. Ix Embroidery instructor Hundred percent (I) should posses diploma in fashion design Technology or Diploma in costume Design and dress making from a recognized university or institute and (ii) Should posses at least two years. Practical experience in an organization registered under the Factories Act 1948 or at least two year .teaching experience from a government or an institute recognized by the government. Or (I)should posses National trade certification / National Apprenticeship certificate in embroidery and cutting for vocational training; (I) should have passed craft instructors training course from central training institute / Advance training institute or teacher institute. In Punjab in Embroidery and cutting & tailoring Trades. And…. 160 PUNJAB GOVT GAZ., FEB. 23. 2001 (PHGN 4, 1992 SAKA) 1 2 3 4 (iii) Should posses at least two years. Practical experience in an organization registered under the Factories act .1948 or at least two years. Teaching experience in the line in a government institution or an institution recognized by the government. X Hair and skin Instructor Hundred percent (I) should posses Diploma in cosmetology or Diploma in beauty culture from a recognized university or institute ;and (ii) Should posses at least two years. Practical experience from concern registered under the factories act. 1948 or at least two years. Teaching experience from a government or an institute recognized by the government. Or (I) should posses national trade certificate/ National Apprenticeship in hair and skin care trade from National council for Vocational training : (ii) should have passed craft instructors training course from central training institute / advance Training institute in hair and skin care trade from national council for vocational training and (iii_) should posses three years. Practical experience in an Organization registered under the factories act. 1948 or at least three years. Teaching experience in the line in a government institute recognized by the government. 161 PUNJAB GOVT GAZ., FEB .23. 2001 (PHGN 4, 1992 SAKA) 1 2 3 4 Xi Knitting with hand and machine instructor Hundred percent (I) should posses Diploma/ in knitting/ Hosiery Technology from a recognized university or institution ; and (ii) Should posses at least three years. Practical experience in an organization registered under the factories Act.1948 or at least three years. Teaching experience from a government or an institute recognized by the government. Or (I) should posses national trade certificate/ National apprenticeship certificate in knitting with hand and machine trade from national council for vocational training; (ii) should have passed craft Instructors training course from central training institute / advance training institute knitting with hand and machine trade from National council for Vocational training and. (iii) Should press three years. Practical experience in an organization registered under the factories Act. 1948 or at least three years teaching experience in the line in a government institution or an institution recognized by the government. 162 PUNJAB GOVT GAZ., FEB. 23, 2001 (PHGN 4, 1992 SAKA) 1 2 3 4 Xii Photography Instructor Hundred percentage (I) should posses Diploma in Photography or Diploma in Motion Picture Photography from a recognized university or institute and; (ii) Should posses at least two years. Practical experience in an organization registered under the factories Act 1948 or at least two year. Teaching experience from a government or an institute recognized by the government Or (I) should posses National Trade certificate/ National Apprenticeship certificate in Photography Trade from National Council for Vocational Training; (ii) should have passed craft Instructor training course from central Training institute / Advance Training Institute Photography Trade from National council for Vocational Training ;and (iii) Should posses three years .Practical experience in an organization registered under the Factories Act. 1948 or at least three years. Teaching 163 PUNJAB GOVT GAZ. , FEB .23, 2001 (PHGN 4, 1992 SAKA) 1 2 3 4 A Government Institution or an Institution recognized by the government. xiii. Preservation of fruit and vegetable Instructor Hundred percentage (I) should posses Diploma in Catering and food Technology from recognized university or institution : and (ii) Should posses three years practical experience. In an organization registered under the factories Act. 1948 or tallest three years teaching experience from a government Institution or an institute recognized by the Government. Or (I) should be B .sc. (Home Science); and (ii) Should posses National Trade Certificate / National Apprenticeship Certificate in Preservation of fruit and vegetable Trade from National Council for vocational Training. xiv. Sport Good (Leather instructor) Hundred Percentage (I) should posses Diploma in Appropriate Branch of Technology from a recognized university or Institution ; and (ii) should posses at least two years .Practical experience in an organization registered experience from a Government or an Institute recognized By the Government. OR 164 PUNJAB GOVT GAZ., FEB. 23, 2001 (PHGN 4, 1992 SAKA) 1 2 3 4 (I) should posses National trade certificate/ National Apprenticeship certificate in sports good Leather Trade from National Council for Vocational Training; (ii) should have passes craft Instructors Training Course from central Training Institute/ Advance Training Institute sports good Leather Trade; and (iii) Should posses at least three years. Practical experience in an organization registered under the Factories act .1948 or at least three years. Teaching Experience in a Government Institution or an Institution recognized by the Government. Xv Manufacture of footwear Instructor Hundred percentage (I) should posses diploma in leather Technology from a recognized university or institution : and (ii) Should posses at least two years. Practical experience in an organization registered under the Factories Act. 1948 or At least two year’s .teaching experience from a government or an institute recognized by the government. Or (I) should posses National Trade Certificate / National Apprenticeship Certificate in Footwear 165 PUNJAB GOVT GAZ., FEB. 23, 2001 (PHGN 4, 1922 SAKA) 1 2 3 4 Trade from National Council for Vocational Training: (ii) should have passed Craft Instructors Training Course from central Training Institute/ Advance Training Institute in the Manufacture of Footwear Trade: and (iii) Should posses three years. Practical experience in an organization registered under the factories Act.1948 or at least three years. Teaching experience in the line in a government institution or an institution recognized by the government Xvi English teacher Hundred percent (I) should be M.A (English ) B.A (with Hon’s in English): and (ii) should be B.Ed (with English as one of elective subject):and (iii) Should posses at least one year teaching experience in the line in a Government institution or an institution recognized by the government. Xvii Education Mistress Hundred percent (I) should be B.Sc.(home science ) or B.Sc. or B.A: and (ii) should be B .Ed: and Xvii Ivory inlay/ Lacquer Turning Hundred percent (I) should be Graduation of university in any discipline: and 166 PUNJAB GOVT GAZ., FEB. 23, 2001 (PHGN 4, 1922 SAKA) 1 2 3 4 Instructor (ii) should posses certificate in Ivory- in- lay/ Lacquer turning from state Council for vocational Training and (iii) Should posse’s atlas two years practical experience in an organization registered under factories Act. 1948 or teaching Experience in the line a government institution or an institution recognized by ht government. Xix Instructor Arts/ and craft/ Designer/ drawing Master/Arts and Craft teacher training institute /government industrial training institute (woman) Industrial Training Institute (scheduled Castes) Hundred percent (I) should posses five years Diploma in drawing and painting/Commercial Arts from Government recognized institution :and (ii) Should posses at least one year practical experience in an organization registered under Factories Act. 1948 0r one year teaching experience from a government institution or an institute recognized by the government. Or (I) should posses M.A (fine arts); (ii) should posses two years Diploma in Arts two years Diploma in Arts and crafts teacher training from a recognized university or institution : and (iii) Should posses at least one year. Practical/ teaching in an organization registered under Factories Act.1948 or teaching experience in the line in a 167 PUNJAB GOVT GAZ., FEB. 23, 2001 (PHGN 4, 1922 SAKA) 1 2 3 4 Government Institution or an institution recognized by the government. xx. Instructor Mathematics and Science ,junior Technical school Hundred percent (I) should be basking. (Non Medical). Bed: and (ii) should posses at least two years ,Practical / Teaching experience in the line in a government institution or an institution recognized by the government xxi. Instructor Humanities/ Language junior Technical School Hundred percent (I) should be B.A .or Bed: and (ii) Should posses at least two years. Practical/teaching experience in the line in a government institution or an institution recognized by the government. xxii. Instructor Punjabi junior Technical school Hundred percent (I) should be B.A (with Punjabi as elective subject ) Bed: and (ii) Should posses at least two years .Practical /Teaching experience in the line in a government institution or an institution recognized by the government. Xxiii Instructor Hindi junior technical school Hundred percent (I)should be B.A (with Hindi as elective subject ) Bed: and (ii) Should posses at least two years. Practical /teaching experience in the line in a government institution recognized by the government. Xxiv Instructor social studies Hundred percent (I) should be B.A (with sociology/ psychology/ social work as one of the subject): and 168 PUNJAB GOVT NGAZ. , FEB. 23, 2001 (PHGN 4, 1992 SAKA) 1 2 3 4 (ii) should be Bed (with social studies as one of the teaching subject ) 8. VERNACULAR TEACHER Industrial training institute (schedule caste) / language teacher Industrial training Institute (women) Hundred percent (I) should be B.A (Punjabi as one o the elective subject); (ii) should be Bed: and (iii) Should posses at least two years. Practical/ teaching experience in the line in a government institution or an institution recognized by the government. Punjab GOVT GAZ., FEB.23,2001 (PHGN 4, 1992 SAKA) GOVERNMENT OF PUNJAB DEPARTMENT OF TECHNICAL EDUCATION AND INDUSTRIAL TRIANING (TECHNICAL EDUCATION 1 BRANCH) NOTIFICATION The 25th January,2001 No-G.S.R. 16/Const./Art./309/2001.-In exercise of the powers conferred by the proviso to article 309 of the constitution of India . and all other powers enabling him in this behalf. the Governor of Punjab is pleased to make the following rules regulating the requirement and the conditions of service of the persons appointed to the Punjab industrial Training(ClassIII) Ministerial Service. Namely:- RULES 1. Short title, commencement and application.- (1)These rules may be called the Punjab Industrial Training (ClassIII) Ministerial Service Rules.2001. 2. They shall come into force on and with effects from the date of their publication in the official Gazette. 3. They shall apply to the posts specified in Appendix ’A’ to these rules. 2. Definition.- (I) In these rules, unless the context otherwise requires:- (a) ‘Appendix means an Appendix appended to these rules :- (b) ’Director’ means the Director Technical Education and Industrial Training Punjab: (c) ‘Government ‘ means the Government of the State of Punjab in the Department of Technical Education and industrial Training and (d) ‘Service’ means the Punjab Industrial Training (ClassIII) Ministerial Service. (2) Unless otherwise Provided in the rules the expressions used but not defined in these rules shall have the respective meanings assigned to the expressions in the Punjab Civil services (General and Common Conditions of Service) Rules,1994

Previous and next

All provisions of Department of Technical education and Industrial Training(IT Wing) Rules 2001,2006,2009

Questions people ask

Is rule 2 of Department of Technical education and Industrial Training(IT Wing) Rules 2001,2006,2009 still in force?

No repeal of Department of Technical education and Industrial Training(IT Wing) Rules 2001,2006,2009 is recorded.