Rule 15, Tripura Factories Rules, 2007: Planning machines
Tripura Factories Rules, 2007 - Rule 15
Text of rule 15
Planning machines
15. Planning machines. –
1) A planning machine (other than a planning machine which is mechanically
fed) shall not be used for overhead planning unless it is fitted with a
cylindrical cutter block.
2) Every planning machine used for overhand planning shall be provided
with a “bridge” guard capable of covering the full length and breadth of
the cutting slot in the bench, and so constructed as to be easily adjusted
both in a vertical and horizontal direction.
3) The feed roller of every planning machine used for thicknessing, except
the combined machine for overhead planning and thicknessing, shall be
provided with an efficient guard.
16. Vertical spindle moulding machines :
1) The cutter of every vertical spindle moulding machine shall be guarded by
the most efficient guard having regard to the nature of the work being
performed.
2) The wood being moulded at a vertical spindle moulding machine shall, if
practicable, be held in a jig or holder of such construction as to reduce as
far as possible the risk of accident to the worker.
Previous and next
Questions people ask
Is rule 15 of Tripura Factories Rules, 2007 still in force?
No repeal of Tripura Factories Rules, 2007 is recorded.