LawGrids logoLAWGRIDS.ORG

Form XXVI, Tamil Nadu Building And Other Construction Workers (Regulation Of Employment And Conditions Of Service) Rules,2006: FORM - XXVI

Tamil Nadu Building And Other Construction Workers (Regulation Of Employment And Conditions Of Service) Rules,2006 - Form XXVI

Text of form XXVI

FORM - XXVI

FORM - XXVI [ See rule 74(b) ] Register of Periodical Test/Examination of Lifting Appliance And Gears Etc. PART-1 Initial and periodical load test of lifting appliances and their annual thorough examination. "Thorough Examination" means a visual examination, supplemented, if necessary, by other means such as a hammer test, carried out as carefully as the conditions permit, in order to arrive at a reliable conclusion as to the safety of the parts examined, and if necessary, for such examination parts of the lifting appliances and gear shall be dismantled. (A) Initial and periodical load tests of lifting appliance Situation and description of lifting appliances tested with distinguishing number of marks if any. Number of certificate of test and examination of competent person. I certify that on the date on which I have appended by signature the lifting appliance shown in column (1) was tested and no defects affecting its safe working condition were found other than those shown in column (5) Remarks (to be signed and dated) Date and signature with seal Date and signature with seal (1) (2) (3) (4) (5) 1. 2. -149- (B) Annual thorough examination. I certify that on the date to which I have appended my signature, the lifting appliance shown in column(1) was thoroughly examined and no defects affecting its safe working conditions were found other than those shown in column(12). Date and Signature with seal Date and Signature with seal Date and Signature with seal Date and Signature with seal Date and Signature with seal Date and Signature with seal Ramarks (to be signed and dated) (6) (7) (8) (9) (10) (11) (12) 1. 2. Explanation:- If all the lifting appliances are thoroughly examined on the same date it will be sufficient to enter in column (1) "All lifting appliances", If not, the parts which have been thoroughly examined on the dates must be clearly indicated. PART-II Initial and periodical load test of loose gears and annual thorough examination List of loose gear: The following classes of loose gears namely- 1. Chains made of malleable cast iron; 2. Plate link chains; 3. Chains, rings, hooks, shackles and swivels made of steel; 4. Pitched chains; 5. Rings, hooks, shackles and swivels permanently attached to pitched chains, pulley blocks, container, spreaders, trays, slings, baskets, etc., and any other similar gear; 6. Hooks and swivels having screw-threaded parts or ball bearings or other case-heardened parts; and 7. Bordeaux connections. -150- Initial Test and periodical load test of loose gears. Distinguishing Number or marks Description of loose gear tested and examined Number of certificates of test and examination of competent person I certify that on the date to which I have appended my signature the loose gears shown in column (1) and (2) were tested and no defects affecting the safe working condition were found other than those shown in column (6) Date and signature with seal Date and signature with seal (1) (2) (3) (4) (5) 1. 2. 3. 4. 5. Annual thorough examination of loose gears. Remarks (to be signed and dated) I certify that on the date to which I have appended my signature the loose gears shown in column(1) and (2) were thoroughly examined by me and no defects affecting their safe working condition were found other than those shown in column(10). Remarks (to be signed and dated) Date and signature with seal Date and signature with seal Date and signature with seal (6) (7) (8) (9) (10) 1. 2. 3. 4. 5. -151- PART-III Annealing of Chains, Rings, Hooks, Shackles and Swivels (other than those exempted.) (See Part-II) 12.5 mm and smaller chains, rings, hooks, shackels and swivels in general use, Other chains, rings, hooks, Shackles and swivels in General use. If used with lifting appliance driven by power, must be annealed once atleast in every six months if used solely with lifting appliance worked by hand must be annealed once atleast in every twelve months. If used with lifting appliance driven by power, must be annealed once atleast in twelve months. If used solely with lifting appliance worked by hand, must be annealed once atleast in every two years. Explanation:- It is recommended though not required by rules that annealing should be carried out in a suitably constructed furnace heated to temperature between 1100 degree and 1300 degree Fahrenheit or 600 degree and 700 degree Centigrade, for a period between 30 and 60 minutes. Distinguishing Description Number of I certify that on the date to Remarks Number or of the which I have appended (to be mark gear certificate my signature, the gear described signed annealed of test and in columns 1 and 2 was and examination effectually annealed under dated) my supervision; that after being so annealed every article was carefully inspected and that no defects affecting its safe working condition were found other than those shown in column 7. Date and Date and Date and signature signature signature with seal with seal with seal (1) (2) (3) (4) (5) (6) (7) officers Typewritten text ] Preliminary. Responsibilities and duties of employers, architects, project engineers and designers, building workers, etc. State Advisory Committee, Registration of Establishments. Registration of Establishments. CHAPTER V. PART-111. Slipping, tripping, cutting, drowning and falling hazards.- Use of Safety Helmets and Shoes:-- Lifting Appliances And Gear. Runways and Ramps. Work on or adjacent to water. CHAPTER X. Concrete work Preparation and pouring of concrete and erection of concrete structures,—The Demolition. Excavation and Tunneling Works. CHAPTER XIV. Ladders and Step-Ladders. CHAPTER XVI. Structural Frame and Form Work. Stacking and Unstacking. Scaffold. Cofferdams and Caissons. CHAPTER XXI CHAPTER XXII, CHAPTER XXIII CHAPTER XXIV. CHAPTER XXV. PART IV . Weekly rest, payment for work done on the day of rest at overtime rate, etc.- Application of provisions of this chapter to certain classes of building workers,- CHAPTER XXVII CHAPTER - XXVIII CHAPTER XXIX. PARTY. Schedule-I TABLE TABLE TABLE TABLE Procedure for testing: The derricks tested under clause (3) shall not be used in union purchase rigs unless,- SCHEDULE-II. SCHEDULE-IlI SCHEDUI.E - IV SCHEDULE - V. SCHEDULE-VI . SCHEDULE-VII. SCHEDULE-VIII Appointment of Safety Officers. SCHEDULE -IX Hazardous process. SCHEDULE-X. SCHEDULE-XI SCHEDULE-XII. PERMISSIBLE LEVELS OF CERTAIN CHEMICAL SUBSTANCES IN THE WORK ENVIRONMENT Declaration by the employer-

Previous and next

All provisions of Tamil Nadu Building And Other Construction Workers (Regulation Of Employment And Conditions Of Service) Rules,2006

Questions people ask

Is form XXVI of Tamil Nadu Building And Other Construction Workers (Regulation Of Employment And Conditions Of Service) Rules,2006 still in force?

No repeal of Tamil Nadu Building And Other Construction Workers (Regulation Of Employment And Conditions Of Service) Rules,2006 is recorded.