Rule 186, THE BUILDING AND OTHER CONSTRUCTION WORKERS' (REGULATION OF EMPLOYMENT AND CONDITIONS OF SERVICE) JHARKHAND RULES, 2006: Erection or dismantling of steel and pre-fabricated structure
THE BUILDING AND OTHER CONSTRUCTION WORKERS' (REGULATION OF EMPLOYMENT AND CONDITIONS OF SERVICE) JHARKHAND RULES, 2006 - Rule 186
Text of rule 186
Erection or dismantling of steel and pre-fabricated structure
186. Erection or dismantling of steel and pre-fabricated structure. - The employer shall ensure at
a construction site of a building or other construction work that-
(a) the safety of building workers employed for the erection or dismantling of steel structures
and pre-fabricated structures is ensured from danger by using appropriate means such as
the following namely:-
(i) ladders, gangways or fixed platforms ;
(ii) platforms, buckets, boatswain's chair or other appropriate means suspended from
lifting appliances;
(iii) safety harness, life lines, catch net or catch platform ;
(iv) power-operated mobile working platforms.
73
(b) the work of erection or dismantling of buildings or structures or formwork or false work
or shoring or any other civil engineering work is carried out by trained building workers
under the supervision of a responsible person.
(c) steel or pre-fabricated structures are so designed and made that such structures can be
safely transported or erected ; and weight of each unit of such structures is clearly
marked on such unit ;
(d) the design of each such part maintains stability of each part of the structures referred to in
clause (a), clause (b) and clause (c), when erected, and to prevent danger, the design
shall explicitly take into account -
(i) the relevant conditions and methods of attachment in the operations of stripping,
transport, storing and temporary support during erection of such parts ; and
(ii) safe guards, such as provision of railing with working platforms, and for mounting
such railings and platforms easily on the structural steel or pre-fabricated parts.
(e) the hooks and other devices built in or provided on the structural steel or pre-fabricated
parts that are required for lifting and transporting such parts are so shaped, dimensioned
and positioned to withstand the stresses to which such hooks or other devices are
subjected;
(f) pre-fabricated parts made of concrete are not stripped or erected before such concrete has
set and hardened sufficiently to the extent provided for in the plants, and such parts are
examined by the responsible person for any sign of damage before their use ;
(g) store places are so constructed that -
(i) there is no risk of structural steel or pre-fabricated parts falling or overturning ;
(ii) storage conditions generally ensure stability and avoid damage having regard to
the method of storage and atmospheric conditions, and
(iii) racks are set on firm ground and designed so that units cannot move accidentally in
such store places ;
(h) structural steel or pre-fabricated parts are not subjected to stresses prejudicial to their
stability while they are stored or transported or raised or set down ;
(i) tongs, clamps and other appliances for lifting structural steel and pre-fabricated parts are-
a. in such shape and dimensions as to ensure a secure grip without damaging such
parts, and
b. marked with the maximum permissible load in the most unfavorable lifting
conditions;
(G) structural steel or pre-fabricated parts are lifted by such methods and appliances that
prevent them from spinning accidentally;
74
(k) structural steel or pre-fabricated parts are provided with railings and working platforms
before raising such parts to prevent any danger of falling of building workers, materials or
articles at the time of any work with such parts ;
(l) all reasonably practical measures are taken to avoid injury to building workers, building
structure or equipment while structural steel or pre-fabricated parts are handled or stored
or transported or raised or lowered ;
(m) structures are not worked on during violent storms or high winds or any other such
hazardous situation;
(n) the risk of falling to which building workers, moving on high or sloping girders, may be
exposed is limited by all means of adequate collective protection or by the use of a safety
harness which is well secured to a sufficiently strong support ;
(o) structural steel parts which are to be erected at a great height are, as far as practicable,
assembled on the ground ;
(p) when structural steel or pre-fabricated parts are being erected, a sufficiently extended area
underneath the workplace shall be barricaded or guarded ;
(q) steel trusses which are being erected are adequately shored, braced or guyed until they are
permanently secured in position ;
(r) structural members are not forced into place by the hoisting machine while any building
worker is in such a position that he is likely to be injured by such operation.
187. Formwork - The employer shall ensure at a construction site of a building or other construction
work that -
(a) all formwork are properly designed keeping in view the safety of building workers,
building or structures ;
(b) a responsible person for structural frame and formwork ;
(i) inspects and examines the material, timber, structural steel and scaffolding for its
strength and suitability before being taken into use ;
(ii) lays-down procedures to cover all stages of such structural frame and formwork;
(iii) supervises such structural frame and formwork ;
(iv) take all necessary steps or measures to correct any situation with a view to prevent
accident or dangerous occurrence
Previous and next
Questions people ask
Is rule 186 of THE BUILDING AND OTHER CONSTRUCTION WORKERS' (REGULATION OF EMPLOYMENT AND CONDITIONS OF SERVICE) JHARKHAND RULES, 2006 still in force?
No repeal of the BUILDING AND OTHER CONSTRUCTION WORKERS' (REGULATION OF EMPLOYMENT AND CONDITIONS OF SERVICE) JHARKHAND RULES, 2006 is recorded.