Regulation 4, Food Safety and Standard Act 2006: Any other Food Business Operator Rs. 2000/
Food Safety and Standard Act 2006 - Regulation 4
Text of regulation 4
Any other Food Business Operator Rs. 2000/
4. Any other Food Business Operator Rs. 2000/—
The fees paid by any applicant for a license shall not be refundable under any circumstances.
Issue of Duplicate registration or License
(1) Where a registration certificate or license is lost, destroyed, torn, defaced or mutilated, the applicant may
apply for a duplicate copy of the registration certificate or license during the validity period, accompanied
with a fee amounting to 10% of the applicable License fee.
(2) On receipt of such an application, the Licensing Authority shall grant a duplicate copy of the registration
certificate or license, as the case may be to the applicant with the word "Duplicate" appearing prominently
thereon.
Mode of Payment
The payment shall be made by the Food Business Operator through Bank draft or online transfer or treasury chalan or any
other suitable means as specified by the Licensing Authority.
Schedule 4
(See Regulation 2.1.2)
General Hygienic and Sanitary practices to be followed by Food Business operators
It is hereby recognized and declared as a matter of legislative determination that in the field of human nutrition, safe,
clean, wholesome food - is indispensable to the health and welfare of the consumer of the country; that - food is a
perishable commodity susceptible to contamination and adulteration; - and that - basic sanitary and hygienic conditions
are deemed to be necessary for the production and distribution of milk - Meat products, service establishments etc.
The establishment in which food is being handled, processed, manufactured, stored, distributed by the food business
operator whether holder of registration certificate or a license as per the norms laid down in these regulations and the
persons handling them should conform to the sanitary and hygienic requirement, food safety measures and other
standards as specified below. It shall also be deemed to be the responsibility of the food business operator to ensure
adherence to necessary requirements.
These are the basic - compulsory requirements for ensuring safety of the food manufactured in any premise and FBOs
shall continuously try to improve the sanitary and hygienic conditions at the premises with a goal of attaining India
HACCP standards within a - previously determined period.
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 87
Part I - General Hygienic and Sanitary practices to be followed by Petty Food Business Operators applying for
Registration
(See Regulation 2.1.1(2))
In case inspection of the units is directed by the Registering or Licensing Authority, the inspection should confirm
that the following measures are adopted by the unit as far as possible:
SANITARY AND HYGIENIC REQUIREMENTS FOR FOOD MANUFACTURER/ PROCESSOR/HANDLER
The place where food is manufactured, processed or handled shall comply with the following requirements:
1. The premises shall be located in a sanitary place and free from filthy surroundings and shall maintain overall
hygienic environment. All new units shall set up away from environmentally polluted areas.
2. The premises to conduct food business for manufacturing should have adequate space for manufacturing
and storage to maintain overall hygienic environment.
3. The premises shall be clean, adequately lighted and ventilated and sufficient free space for movement.
4. Floors, Ceilings and walls must be maintained in a sound condition. They should be smooth and easy to clean
with no flaking paint or plaster.
5. The floor and skirted walls shall be washed as per requirement with an effective disinfectant the premises shall
be kept free from all insects. No spraying shall be done during the conduct of business, but instead fly swats/
flaps should be used to kill spray flies getting into the premises. Windows, doors and other openings shall be
fitted with net or screen, as appropriate to make the premise insect free The water used in the manufacturing
shall be potable and if required chemical and bacteriological examination of the water shall be done at regular
intervals at any recognized laboratory.
6. Continuous supply of potable water shall be ensured in the premises. In case of intermittent water supply,
adequate storage arrangement for water used in food or washing shall be made.
7. Equipment and machinery when employed shall be of such design which will permit easy cleaning.
Arrangements for cleaning of containers, tables, working parts of machinery, etc. shall be provided.
8. No vessel, container or other equipment, the use of which is likely to cause metallic contamination injurious
to health shall be employed in the preparation, packing or storage of food. (Copper or brass vessels shall have
proper lining).
9. All equipments shall be kept clean, washed, dried and stacked at the close of business to ensure freedom from
growth of mould/ fungi and infestation.
10. All equipments shall be placed well away from the walls to allow proper inspection.
11. There should be efficient drainage system and there shall be adequate provisions for disposal of refuse.
12. The workers working in processing and preparation shall use clean aprons, hand gloves, and head wears.
13. Persons suffering from infectious diseases shall not be permitted to work. Any cuts or wounds shall remain
covered at all time and the person should not be allowed to come in direct contact with food.
14. All food handlers shall keep their finger nails trimmed, clean and wash their hands with soap, or detergent and
water before commencing work and every time after using toilet. Scratching of body parts, hair shall be
avoided during food handling processes.
15. All food handlers should avoid wearing, false nails or other items or loose jewellery that might fall into food
and also avoid touching their face or hair.
16. Eating, chewing, smoking, spitting and nose blowing shall be prohibited within the premises especially while
handling food.
17. All articles that are stored or are intended for sale shall be fit for consumption and have proper cover to avoid
contamination.
18. The vehicles used to transport foods must be maintained in good repair and kept clean.
19. Foods while in transport in packaged form or in containers shall maintain the required temperature.
20. Insecticides / disinfectants shall be kept and stored separately and `away from food manufacturing / storing/
handling areas.
88 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
A. SANITARY AND HYGIENIC REQUIREMENTS FOR STREET FOOD VENDORS AND UNITS OTHER THAN
MANUFACTURING/PROCESSING
1. Potential sources of contamination like rubbish, waste water, toilet facilities, open drains and stray animals
shall be avoided.
2. The surfaces of the Vending carts which come in contact with food or food storage utensils shall be built of
solid, rust/ corrosion resistant materials and kept in clean and good condition They shall be protected from
sun, wind and dust. When not in use, food vending vans shall be kept in clean place and properly protected.
3. Rubbish bin with cover shall be provided by food stall or vending cart owners for any waste generated in the
process of serving and eating by consumers.
4. Working surfaces of vending carts shall be clean, hygienic, impermeable and easy to clean (like stainless
steel), and placed at least 60 to 70 cm. from above ground.
5. Sale points, tables, awnings, benches and boxes, cupboards, glass cases, etc. shall be clean and tidy.
6. Cooking utensils and crockery shall be clean and in good condition. It should not be broken/ chipped.
7. All containers shall be kept clean, washed and dried at the close of business to ensure that there is no growth
of mould/ fungi and infestation.
8. Water used for cleaning, washing and preparing food shall be potable in nature.
9. Transporting of drinking water (treated water like bottled water, boiled/ filtered water through water purifier
etc.) shall be in properly covered and protected containers and it shall be stored in clean and covered
containers in a protected area away from dust and filth.
10. Cooking, storage and serving shall not be done in utensils of, cadmium, lead, non food grade plastic and other
toxic materials.
11. Utensils shall be cleaned of debris, rinsed, scrubbed with detergent and washed under running tap water after
every operation. Wiping of utensils shall be done with clean cloth. Separate cloths shall be used for wiping
hands and for clearing surfaces, cloth used for floor cleaning will not be used for cleaning surfaces of tables
and working areas and for wiping utensils Person cooking, handling or serving food should use hand gloves
and aprons, where necessary. He shall wear head gear and cover his mouth always while at work.
12. Removing dust or crumb from plates or utensils shall be done by using cloth or wiper into dustbin.
13. The person suffering from infectious disease shall not be permitted to work.
14. All food handlers shall remain clean, wear washed clothes and keep their finger nails trimmed, clean and wash
their hands with soap/ detergent and water before commencing work and every time after touching food or
using toilet.
15. All food handlers should avoid wearing loose items that might fall into food and also avoid touching or
scratching their face, head or hair.
16. All articles that are stored or intended for sale shall have proper cover to avoid contamination. Food should
be stored only in food grade plastic containers as steel containers to prevent leaking.
17. Eating, chewing, smoking, , spitting and nose blowing shall be prohibited within the premises.
18. Foods shall be prepared or cooked as per the day's requirement to avoid left over which might be used in the
next day without ascertaining its safety for consumption or use in food. Consumables left over shall be kept
in the refrigerator immediately after their intended use.
19. Adequate number of racks shall be provided for storage of articles of food, with clear identity of each
commodity. Proper compartment for each class shall also be provided wherever possible so that there is no
cross contamination.
20. Rubbish or garbage bin shall be with a tight cover and shall be cleaned everyday by transferring contents into
designated locations.
21. Vegetarian and non-vegetarian items should be segregated.
22. Fridge should be cleaned at least once a week to remove stains, ice particles and food particles. The temperature
in the fridge should be in the range of 4°C - 6°C.
23. The location of the vending unit should be in a place approved by the local authorities and not blocking traffic
or pedestrians or near unhygienic locations.
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 89
Part-II
(See Regulation 2.1.1(4))
General Requirements on Hygienic and Sanitary Practices to be followed by all Food Business Operators applying for
License
The establishment in which food is being handled, processed, manufactured, packed, stored, and distributed by the
food business operator and the persons handling them should conform to the sanitary and hygienic requirement, food
safety measures and other standards as specified below. It shall also be deemed to be the responsibility of the food
business operator to ensure adherence to necessary requirements.
In addition to the requirements specified below, the food business operator shall identify steps in the activities of
food business, which are critical to ensure food safety, and ensure that safety procedures are identified, implemented,
maintained and reviewed periodically.
1 LOCATION AND SURROUNDINGS
1.1 Food Establishment shall ideally be located away from environmental pollution and industrial activities that
produce disagreeable or obnoxious odour, fumes, excessive soot, dust, smoke, chemical or biological emissions and
pollutants, and which pose a threat of contaminating food areas that are prone to infestations of pests or where wastes,
either solid or liquid, cannot be removed effectively.
1.2 In case there are hazards of other environment polluting industry located nearby, appropriate measures should
be taken to protect the manufacturing area from any potential contamination.
1.3 The manufacturing premise should not have direct access to any residential area.
2 LAYOUT AND DESIGN OF FOOD ESTABLISHMENT PREMISES
As far as possible, the layout of the food establishment shall be such that food preparation / manufacturing
processes are not amenable to cross-contamination from other pre and post manufacturing operations like goods receiving,
pre-processing (viz. packaging, washing / portioning of ready-to-eat food etc).
2.1Floors, ceilings and walls must be maintained in a sound condition to minimize the accumulation of dirt,
condensation and growth of undesirable moulds. They should be made of impervious material and should be smooth and
easy to clean with no flaking paint or plaster.
2.2Doors shall also be made of smooth and non-absorbent surfaces so that they are easy to clean and wherever
necessary, disinfect.
2.3The floor of food processing / food service area shall have adequate and proper drainage and shall be easy to
clean and where necessary, disinfect. Floors shall be sloped appropriately to facilitate drainage and the drainage shall
flow in a direction opposite to the direction of food preparation / manufacturing process flow.
2.4Adequate control measures should be in place to prevent insects and rodents from entering the processing area
from drains.
2.5Windows, doors & all other openings to outside environment shall be well screened with wire-mesh or insect-
proof screen as applicable to protect the premise from fly and other insects / pests / animals & the doors be fitted with
automatic closing springs. The mesh or the screen should be of such type which can be easily removed for cleaning.
2.6No person shall manufacture, store or expose for sale or permit the sale of any article of food in any premises not
effectively separated to the satisfaction of the licensing authority from any privy, urinal, sullage, drain or place of storage
of foul and waste matter.
3 EQUIPMENT & CONTAINERS
3.1Equipment and containers that come in contact with food and used for food handling, storage, preparation,
processing, packaging and serving shall be made of corrosion free materials which do not impart any toxicity to the food
material and should be easy to clean and /or disinfect (other than disposable single use types).
3.2Equipment and utensils used in the preparation of food shall be kept at all times in good order and repair and in
a clean and sanitary condition. Such utensil or container shall not be used for any other purpose.
3.3 Every utensil or container containing any food or ingredient of food intended for sale shall at all times be either
provided with a properly fitted cover/lid or with a clean gauze net or other material of texture sufficiently fine to protect the
food completely from dust, dirt and flies and other insects.
90 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
3.4 No utensil or container used for the manufacture or preparation of or containing any food or ingredient of food
intended for sale shall be kept in any place in which such utensil or container is likely by reason of impure air or dust or any
offensive, noxious or deleterious gas or substance or any noxious or injurious emanations, exhalation, or effluvium, to be
contaminated and thereby render the food noxious.
3.5 Equipment shall be so located, designed and fabricated that it permits necessary maintenance and cleaning
functions as per its intended use and facilitates good hygiene practices inside the premise including monitoring and audit.
3.6Appropriate facilities for the cleaning and disinfecting of equipments and instruments and wherever possible
cleaning in place (CIP) system shall be adopted.
3.7Equipment and containers for waste, by-products and inedible or dangerous substances, shall be specifically
identifiable and suitably constructed.
3.8Containers used to hold cleaning chemicals and other dangerous substances shall be identified and stored
separately to prevent malicious or accidental contamination of food.
3.9 If required, a waste water disposal system / effluent treatment plant shall be put in place.
3.10 All items, fittings and equipments that touch or come in contact with food must be:
kept in good condition in a way that enables them to be kept clean and wherever necessary, to be
disinfected.
Chipped enameled containers will not be used. Stainless steel /aluminum / glass containers, mugs,
jugs, trays etc. suitable for cooking and storing shall be used. Brass utensils shall be frequently provided with
lining.
4 FACILITIES
4.1 Water supply
4.1.1 Only potable water, with appropriate facilities for its storage and distribution shall be used as an
ingredient in processing and cooking.
4.1.2 Water used for food handling, washing, should be of such quality that it does not introduce any hazard
or contamination to render the finished food article unsafe.
4.1.3 Water storage tanks shall be cleaned periodically and records of the same shall be maintained in a
register.
4.1.4 Non potable water can be used provided it is intended only for cleaning of equipment not coming in
contact with food, which does not come into contact with food steam production, fire fighting & refrigeration
equipment and provided that pipes installed for this purpose preclude the use of this water for other purposes and
present no direct or indirect risk of contamination of the raw material, dairy products or food products so processed,
packed & kept in the premise.
4.1.5 Non potable water pipes shall be clearly distinguished from those in use for potable water.
4.2 For Cleaning Utensils / Equipments
Adequate facilities for cleaning, disinfecting of utensils and equipments shall be provided. The facilities must
have an adequate supply of hot and cold water if required.
4.3 Washing of Raw materials
Adequate facilities for washing of raw food should be provided. Every sink (or other facilities) for washing
food must have an adequate supply of hot and/or cold water. These facilities must be kept clean and, where
necessary, disinfected. Preferably, sinks which are used for washing raw foods shall be kept separate and that
should not be used for washing utensils or any other purposes.
4.4 Ice and Steam
Ice and steam used in direct contact with food shall be made from potable water and shall comply with
requirements specified under 4.1.1. Ice and steam shall be produced, handled and stored in such a manner that no
contamination can happen
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 91
4.5 Drainage and waste disposal
4.5.1 Food waste and other waste materials shall be removed periodically from the place where food is being
handled or cooked or manufactured to avoid building up. A refuse bin of adequate size with a proper cover
preferably one which need not be touched for opening shall be provided in the premises for collection of waste
material. This shall be emptied and washed daily with a disinfectant and dried before next use.
4.5.2 The disposal of sewage and effluents (solid, liquid and gas) shall be in conformity with requirements of
Factory / Environment Pollution Control Board. Adequate drainage, waste disposal systems and facilities shall be
provided and they shall be designed and constructed in such manner so that the risk of contaminating food or the
potable water supply is eliminated.
4.5.3 Waste storage shall be located in such manner that it does not contaminate the food process, storage
areas, the environment inside and outside the food establishment and waste shall be kept in covered containers and
shall be removed at regular intervals.
4.5.4 Periodic disposal of the refuse / waste should be made compulsory. No waste shall be kept open inside
the premise and shall be disposed of in an appropriate manner as per local rules and regulations including those for
plastics and other non environment friendly materials.
4.6 Personnel facilities and toilets
4.6.1 Personnel facilities shall include those for proper washing and drying of hands before touching food
materials including wash basins and a supply of hot and /or cold water as appropriate; separate lavatories, of
appropriate hygienic design, for males and females separately; and changing facilities for personnel and such
facilities shall be suitably located so that they do not open directly into food processing, handling or storage areas.
4.6.2 Number of toilets should be adequate depending on the number of employees (male /female) in the
establishment and they should be made aware of the cleanliness requirement while handling food.
4.6.3 Rest and refreshments rooms shall be separate from food process and service areas and these areas shall
not lead directly to food production, service and storage areas.
4.6.4 A display board mentioning do's & don'ts for the workers shall be put up inside at a prominent place in
the premise in English or in local language for everyone's understanding.
4.7 Air quality and ventilation
Ventilation systems natural and /or mechanical including air filters, exhaust fans, wherever required, shall be
designed and constructed so that air does not flow from contaminated areas to clean areas.
4.8 Lighting
Natural or artificial lighting shall be provided to the food establishment, to enable the employees/workers to
operate in a hygienic manner. Lighting fixtures must wherever appropriate, be protected to ensure that food is not
contaminated by breakages of electrical fittings.
5 FOOD OPERATIONS AND CONTROLS
5.1 Procurement of raw materials
5.1.1 No raw material or ingredient thereof shall be accepted by an establishment if it is known to contain
parasites, undesirable micro-organisms, pesticides, veterinary drugs or toxic items, decomposed or extraneous
substances, which would not be reduced to an acceptable level by normal sorting and/or processing.
5.1.2 All raw materials, food additives and ingredients, wherever applicable, shall conform to all the Regulations
and standards laid down under the Act.
5.1.3 Records of raw materials, food additives and ingredients as well as their source of procurement shall be
maintained in a register for inspection.
5.1.4 All raw materials should be checked & cleaned physically thoroughly.
5.1.5 Raw materials should be purchased in quantities that correspond to storage/ preservation capacity.
5.1.6 Packaged raw material must be checked for 'expiry date'/ 'best before'/ 'use by' date, packaging integrity
and storage conditions.
92 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
5.1.7 Receiving temperature of potentially high risk food should be at or below 5 0C
5.1.8 Receiving temperature of frozen food should be -18 0C or below.
5.2 Storage of raw materials and food
5.2.1 Food storage facilities shall be designed and constructed to enable food to be effectively protected from
contamination during storage; permit adequate maintenance and cleaning, to avoid pest access and accumulation.
5.2.2 Cold Storage facility, wherever required, shall be provided to raw, processed / packed food according to
the type and requirement.
5.2.3 Segregation shall be provided for the storage of raw, processed, rejected, recalled or returned materials
or products which will be distinguishably marked and secured. Raw materials and food shall be stored in separate
areas from printed packaging materials, stationary, hardware and cleaning materials / chemicals.
5.2.4 Raw food, particularly meat, poultry and seafood products shall be cold stored separately from the area
of work-in-progress, processed, cooked and packaged products. The conditions of storage in terms of temperature
and humidity requisite for enhancing the shelf life of the respective food materials / products shall be maintained.
5.2.5 Storage of raw materials, ingredients, work-in-progress and processed / cooked or packaged food
products shall be subject to FIFO (First in, First Out), FEFO (First Expire First Out) stock rotation system as
applicable.
5.2.6 Containers made of non-toxic materials shall be provided for storage of raw materials, work-in-progress
and finished / ready to serve products. The food materials shall be stored on racks / pallets such that they are
reasonably well above the floor level and away from the wall so as to facilitate effective cleaning and prevent
harbouring of any pests, insects or rodents.
5.3 Food Processing / Preparation, Packaging and Distribution / Service
5.3.1.Time and temperature control
5.3.1.1 The Food Business shall develop and maintain the systems to ensure that time and temperature are
controlled effectively where it is critical to the safety and suitability of food. Such control shall include time and
temperature of receiving, processing, cooking, cooling, storage, packaging, distribution and food service upto the
consumer, as applicable.
5.3.1.2 Whenever frozen food / raw materials are being used / handled / transported, proper care should be
taken so that defrosted / thawed material are not stored back after opening for future use.
5.3.1.3 If thawing is required then only required portion of the food should be thawed at a time.
5.3.1.4 Wherever cooking is done on open fire, proper outlets for smoke/steam etc. like chimney, exhaust fan
etc. shall be provided.
5.4 Food Packaging
5.4.1 Packaging materials shall provide protection for all food products to prevent contamination, damage and shall
accommodate required labelling as laid down under the FSS Act & the Regulations there under.
5.4.2 For primary packaging (i.e packaging in which the food or ingredient or additive comes in direct contact with
the packaging material), only Food grade packaging materials are to be used . For packaging materials like aluminium
plastic and tin, the standards to be followed are as mentioned under the FSS Regulations and rules framed there under.
5.4.3 Packaging materials or gases where used, shall be non-toxic and shall not pose a threat to the safety and
suitability of food under the specified conditions of storage and use.
5.5 Food Distribution / Service
5.5.1 All critical links in the supply chain need to be identified and provided for to minimize food spoilage during
transportation. Processed / packaged and / or ready-to-eat food shall be protected as per the required storage conditions
during transportation and / or service.
5.5.2 Temperatures and humidity which are necessary for sustaining food safety and quality shall be maintained.
The conveyances and /or containers shall be designed, constructed and maintained in such manner that they can
effectively maintain the requisite temperature, humidity, atmosphere and other conditions necessary to protect food
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 93
conveyances and / or containers used for transporting / serving foodstuffs shall be non toxic, kept clean and maintained
in good condition in order to protect foodstuffs from any contamination.
5.5.3 Receptacles in vehicles and / or containers shall not be used for transporting anything other than foodstuffs
where this may result in contamination of foodstuffs. Where the same conveyance or container is used for transportation
of different foods, or high risk foods such as fish, meat, poultry, eggs etc., effective cleaning and disinfections shall be
carried out between loads to avoid the risk of cross- contamination. For bulk transport of food, containers and conveyances
shall be designated and marked for food use only and be used only for that purpose.
6 Management and Supervision
6.1 A detailed Standard Operating Procedure (SOP) for the processing of food as well as its packing, despatch and
storage will be developed for proper management which in turn would help in identifying any problem and the exact point,
so that damage control would be faster.
6.2 The Food Business shall ensure that technical managers and supervisors have appropriate qualifications,
knowledge and skills on food hygiene principles and practices to be able to ensure food safety and quality of its products,
judge food hazards, take appropriate preventive and corrective action, and to ensure effective monitoring and supervision.
7 Food Testing Facilities
7.1 A well equipped, laboratory for testing of food materials / food for physical, microbiological and chemical
analysis in accordance with the specification/standards laid down under the rules and regulations shall be in place inside
the premise for regular / periodic testing and when ever required.
7.2 In case of any suspicion or possible contamination, food materials / food shall be tested before dispatch from the
factory.
7.3 If there is no in house laboratory facility, then regular testing shall be done through an accredited lab notified by
FSSAI . In case of complaints received and if so required, the company shall voluntarily do the testing either in the in-
house laboratory or an accredited lab or lab notified by FSSAI.
8 Audit, Documentation and Records
8.1 A periodic audit of the whole system according to the SOP shall be done to find out any fault / gap in the GMP
/ GHP system.
8.2 Appropriate records of food processing / preparation, production / cooking, storage, distribution, service, food
quality, laboratory test results, cleaning and sanitation, pest control and product recall shall be kept and retained for a
period of one year or the shelf-life of the product, whichever is more.
9 SANITATION AND MAINTENANCE OF ESTABLISHMENT PREMISES
9.1 Cleaning and Maintenance
9.1.1 A cleaning and sanitation programme shall be drawn up and observed and the record thereof shall be
properly maintained, which shall indicate specific areas to be cleaned, cleaning frequency and cleaning procedure
to be followed, including equipment and materials to be used for cleaning. Equipments used in manufacturing will be
cleaned and sterilized at set frequencies.
9.1.2 Cleaning chemicals shall be handled and used carefully in accordance with the instructions of the
manufacturer and shall be stored separately away from food materials, in clearly identified containers, to avoid any
risk of contaminating food.
9.2 Pest Control Systems
9.2.1 Food establishment, including equipment and building shall be kept in good repair to prevent pest
access and to eliminate potential breeding sites. Holes, drains and other places where pests are likely to gain access
shall be kept in sealed condition or fitted with mesh / grills / claddings or any other suitable means as required and
animals, birds and pets shall not be allowed to enter into the food establishment areas/ premises.
9.2.2 Food materials shall be stored in pest-proof containers stacked above the ground and away from walls.
9.2.3 Pest infestations shall be dealt with immediately and without adversely affecting the food safety or
suitability. Treatment with permissible chemical, physical or biological agents, within the appropriate limits, shall be
94 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
carried out without posing a threat to the safety or suitability of food. Records of pesticides / insecticides used
along with dates and frequency shall be maintained.
10 PERSONAL HYGIENE
10.1 Health Status
10.1.1 Personnel known, or believed, to be suffering from, or to be a carrier of a disease or illness likely to be
transmitted through food, shall not be allowed to enter into any food handling area . The Food Business shall
develop system, whereby any person so affected, shall immediately report illness or symptoms of illness to the
management and medical examination of a food handler shall be carried out apart from the periodic checkups, if
clinically or epidemiologically indicated.
10.1.2 Arrangements shall be made to get the food handlers / employees of the establishment medically
examined once in a year to ensure that they are free from any infectious, contagious and other communicable
diseases. A record of these examinations signed by a registered medical practitioner shall be maintained for inspection
purpose.
10.1.3 The factory staff shall be compulsorily inoculated against the enteric group of diseases as per
recommended schedule of the vaccine and a record shall be kept for inspection.
10.1.4 In case of an epidemic, all workers are to be vaccinated irrespective of the scheduled vaccination.
10.2 Personal Cleanliness
10.2.1 Food handlers shall maintain a high degree of personal cleanliness. The food business shall provide to
all food handlers adequate and suitable clean protective clothing, head covering, face musk, gloves and footwear
and the food business shall ensure that the food handlers at work wear only clean protective clothes, head covering
and footwear every day.
10.2.2 Food handlers shall always wash their hands with soap and clean potable water, disinfect their hands
and then dry with hand drier or clean cloth towel or disposable paper at the beginning of food handling activities
immediately after handling raw food or any contaminated material, tools, equipment or work surface, where this
could result in contamination of other food items or after using the toilet.
10.2.3 Food handlers engaged in food handling activities shall refrain from smoking, spitting, chewing, sneezing
or coughing over any food whether protected or unprotected and eating in food preparation and food service areas.
10.2.4 The food handlers should trim their nails and hair periodically, do not encourage or practice unhygienic
habits while handling food.
10.2.5 Persons working directly with and handling raw materials or food products shall maintain high standards
of personal cleanliness at all times. In particular:
a) they shall not smoke, spit, eat or drink in areas or rooms where raw materials and food products are
handled or stored;
b) wash their hands at least each time work is resumed and whenever contamination of their hands has
occurred; e.g. after coughing / sneezing, visiting toilet, using telephone, smoking etc.
c) avoid certain hand habits - e.g. scratching nose, running finger through hair, rubbing eyes, ears and
mouth, scratching beard, scratching parts of bodies etc.- that are potentially hazardous when associated with
handling food products, and might lead to food contamination through the transfer of bacteria from the
employee to product during its preparation. When unavoidable, hands should be effectively washed before
resuming work after such actions.
10.3 Visitors
10.3.1 Generally visitors should be discouraged from going inside the food handling areas. Proper care has to
be taken to ensure that food safety & hygiene is not getting compromised due to visitors in the floor area.
10.3.2 The Food Business shall ensure that visitors to its food manufacturing, cooking, preparation, storage
or handling areas must wherever appropriate, wear protective clothing, footwear and adhere to the other personal
hygiene provisions envisaged in this section.
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 95
11 PRODUCT INFORMATION AND CONSUMER AWARNESS
All packaged food products shall carry a label and requisite information as per provisions of Food Safety and Standards
Act, 2006 and Regulations made there under so as to ensure that adequate and accessible information is available to the
each person in the food chain to enable them to handle, store, process, prepare and display the food products safely and
correctly and that the lot or batch can be easily traced and recalled if necessary.
12 TRAINING
12.1 The Food Business shall ensure that all food handlers are aware of their role and responsibility in protecting
food from contamination or deterioration. Food handlers shall have the necessary knowledge and skills which are relevant
to food processing / manufacturing, packing, storing and serving so as to ensure the food safety and food quality.
12.2 The Food Business shall ensure that all the food handlers are instructed and trained in food hygiene and food
safety aspects along with personal hygiene requirements commensurate with their work activities, the nature of food, its
handling, processing, preparation, packaging, storage, service and distribution.
12.3 Periodic assessments of the effectiveness of training, awareness of safety requirements and competency level
shall be made, as well as routine supervision and checks to ensure that food hygiene and food safety procedures are being
carried out effectively.
12.4 Training programmes shall be routinely reviewed and updated wherever necessary.
PART-III
(See Regulation 2.1.2.(1)(5))
Specific Hygienic and Sanitary Practices to be followed by Food Business Operators engaged in manufacture,
processing, storing and selling of Milk and Milk Products
In addition to Part-II, the dairy establishment in which dairy based food is being handled, processed, manufactured,
stored, distributed and ultimately sold by the food business operator, and the persons handling them should conform to
the sanitary and hygienic requirement, food safety measures and other standard as specified below.
I. SANITARY REQUIREMENTS
1. Dairy Establishments shall have the following:
(a) Facilities for the hygienic handling and protection of raw materials and of non-packed or non-wrapped
dairy products during loading and unloading, transport & storing including Bulk Milk cooling facilities.
(b) Special watertight, non-corrodible containers to put raw materials or dairy products intended for human
consumption. Where such raw materials or dairy products are removed through conduits, these shall be constructed
and installed in such a way so as to avoid any risk of contamination of other raw materials or dairy products;
(c) a waste water disposal system which is hygienic and approved ;
(d) facilities for cleaning & disinfecting of tanks used for transporting dairy products and raw milk. These
containers have to be cleaned after every use.
2. The occupier of a dairy establishment shall take appropriate measures to avoid cross-contamination of dairy
products in accordance with the cleaning program as specified in point 9.1 of Part II.
3. Where a dairy establishment produces food stuffs containing dairy products together with other ingredients,
which have not undergone heat treatment or any other treatment having equivalent effect, such dairy products and
ingredients shall be stored separately to prevent cross-contamination.
4. The production of heat-treated milk or the manufacture of milk-based products, which might pose a risk of
contamination to other dairy products, shall be carried out in a clearly separated working area.
5. Equipment, containers and installations which come into contact with dairy products or perishable raw materials
used during production shall be cleaned and if necessary disinfected according to a verified and documented cleaning
programme.
6. Equipment, containers, instruments and installations which come in contact with microbiologically stable dairy
products and the rooms in which they are stored shall be cleaned and disinfected according to a verified and documented
Food Safety management programme drawn up by the owner/occupier of the dairy establishment.
96 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
7. Disinfectants and similar substances used shall be used in such a way that they do not have any adverse effects
on the machinery, equipment, raw materials and dairy products kept at the dairy establishment. They shall be in clearly
identifiable containers bearing labels with instructions for their use and their use shall be followed by thorough rinsing of
such instruments and working equipment with potable water, unless supplier's instructions indicate otherwise.
II. PERSONAL HYGIENE REQUIREMENTS
1. The Food Business Operator shall employ those persons only in such an establishment to work directly with and
handle raw materials or dairy products if those persons have proved to the occupier's satisfaction by means of a medical
certificate, on recruitment, that there is no medical impediment to their employment in that capacity.
2. Persons working directly with and handling raw materials or dairy products shall maintain the highest standards
of personal cleanliness at all times. In particular they shall
(a) wear suitable, clean working clothes and headgear which completely encloses their hair;
(b) wash their hands at least each time work is resumed and whenever contamination of their hands has
occurred; e.g. after coughing / sneezing, visiting toilet, using telephone, smoking etc.
(c) cover wounds to the skin with a suitable waterproof dressing. No person with injury on hand, even with
dressing, shall be placed in any product making/handling section.
(d) avoid certain hand habits - e.g. scratching nose, running finger through hair, rubbing eyes, ears and
mouth, scratching beard, scratching parts of bodies etc. that are potentially hazardous when associated with
handling dairy products, and might lead to food contamination through the transfer of bacteria from the employee
to product during its preparation. When unavoidable, hands should be effectively washed before resuming work
after such actions
III. .SANITARY REQUIREMENTS FOR STORAGE
1. Immediately after procuring, raw milk shall be placed in a clean place, which is suitably equipped so as to prevent
any kind of contamination.
2. The cans/ containers made up of mild steel metal and plastic material used for storage and transportation of milk
and milk products shall not be allowed.
3. If raw milk is brought to the dairy plant by a producer or farmer then it shall be ensured that he brings it within four
hours of milking and it shall be cooled as soon as practicable to a temperature of 4ºC or lower and maintained at that
temperature until processed.
4. Where raw milk is collected daily from a producer, it shall be cooled immediately to a temperature of 4ºC to 6ºC or
lower and maintained at that temperature until processed;
5. When the pasteurization process is completed, pasteurized milk shall be cooled immediately to a temperature of
4ºC or lower.
6. Subject to Paragraph 7 below, any dairy product not intended to be stored at ambient temperature shall be cooled
as quickly as possible to the temperature established by the manufacturer of that product as suitable to ensure its
durability and thereafter stored at that temperature.
7. Where dairy products other than raw milk are stored under cooled conditions, their storage temperatures shall be
registered and the cooling rate shall be such that the products reach the required temperature as quickly as possible.
8. The maximum temperature at which pasteurized milk may be stored until it leaves the treatment establishment shall
not exceed 5ºC.
IV. WRAPPING AND PACKAGING
1. The wrapping and packaging of dairy products shall take place under satisfactory hygienic conditions and in
rooms provided for that purpose.
2. The manufacture of dairy products and packaging operations may take place in the same room if the following
conditions are satisfied: —
(a) The room shall be sufficiently large and equipped to ensure the hygiene of the operations;
(b) the wrapping and packaging shall have been brought to the treatment or processing establishment in
protective cover in which they were placed immediately after manufacture and which protects the wrapping or
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 97
packaging from any damage during transport to the dairy establishment, and they shall have been stored there
under hygienic conditions in a room intended for that purpose;
(c) the rooms for storing the packaging material shall be free from vermin and from dust which could constitute
an unacceptable risk of contamination of the product and shall be separated from rooms containing substances
which might contaminate the products. Packaging shall not be placed directly on the floor;
(d) packaging shall be assembled under hygienic conditions before being brought into the room, except in the
case of automatic assembly or packaging, provided that there is no risk of contamination of the products;
(e) packaging shall be done without delay. It shall be handled by separate group of staff having experience in
handling and product wrapping and
(f) immediately after packaging, the dairy products shall be placed in the designated rooms provided for
storage under required temperature.
3. Bottling or filling of containers with heat-treated milk and milk product shall be carried out hygienically.
4. Wrapping or packaging may not be re-used for dairy products, except where the containers are of a type which
may be re-used after thorough cleaning and disinfecting.
5. Sealing shall be carried out in the establishment in which the last heat-treatment of milk or liquid milk-based
products have been carried out, immediately after filling, by means of a sealing device which ensures that the milk is
protected from any adverse effects of external origin on its characteristic. The sealing device shall be so designed that
once the container has been opened, the evidence of opening remains clear and easy to check.
PART IV
(See Regulation 2.1.2 (1)(5))
Specific Hygienic and Sanitary Practices to be followed by Food Business Operators engaged in manufacture,
processing, storing and selling of Meat and Meat Products
A. Slaughter House
Food Business Operator which slaughters large animals and small animals including sheep and goat or poultry birds
within the premises of his factory for production of meat/ meat products for supply / sale/ distribution to the public shall
comply with the following requirements:—
1. General Requirements:
1.1 No Objection Certificate to be obtained from local Authority before grant of license.
2. Location of Premises:
Such establishments / Slaughter Houses should be linked to a meat market located away from Vegetable, fish
or other food markets and shall be free from undesirable odour, smoke, dust or other contaminants. The premises
shall be located at elevated level in a sanitary place.
3. Premise requirements:
3.1 The slaughter house shall have a reception area/animal holding yard/resting yard, lairage, slaughter hall,
side halls for hide collection, paunch collection, offals collection, and separation, holding room for suspected/
condemned carcass, by-product harvesting, refrigeration room/cold room etc.
3.2 Every such establishment / Slaughter House shall make separate provision in the slaughter hall for the
slaughter of different species which are proposed to be slaughtered (like large animal viz; Cattle and Buffalo, Pigs
and small animals like Sheep & Goat) and for different methods of slaughter (like Halal, Jewish and Jhatka). After
every type of operation the slaughter house shall be cleaned, washed wiped/dried and sanitized thoroughly.
3.3 The slaughter house shall have separation between clean and dirty sections and shall be so organized that
from the introduction of a live animal into the slaughter house up to the emergence of meat and offal classed as fit
for human consumption there shall be a continuous forward movement without any possibility of reversal, intersection
or overlapping between the live animal meat, and between meat and bye products or waste.
98 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
3.4 The reception area/animal holding yard/ resting yard shall have facilities for watering and examining
animals before they are sent to holding pens/lairage. Animals suspected of contagious or infectious diseases shall
be segregated and kept in separate isolation pens which shall also be provided with arrangements for watering and
feeding. After confirmation for any notifiable disease, the designated Veterinary Authority shall notify the disease
as per the existing procedures. The resting yard must have overhead protective shelter.(This is not mandatory for
registration category)
3.5 The lairage shall be adequate in size for the number of animals to be laired.
3.6 Separate space shall be provided for stunning (Wherever applicable), for collection of blood and for
dressing of the carcasses. The slaughtering of an animal shall not be done in the sight of other animals. The
dressing of the carcass shall not be done on the floor. Suitable hoists will be provided to hang the carcass before it
is eviscerated.
3.7 All the floors in lairage, slaughter halls, work rooms, hanging rooms shall be of impervious and non-
slippery material.
3.8 The internal walls will be paved with impervious glazed tiles up to 1 meter height in case of poultry and
small ruminant animals and 5 meter height in case of large ruminant animals . The walls and floors should be epoxy
coated so as to avoid accumulation/absorption of dust, blood/meat particles, microbial/fungal growth.
3.9 Ceiling or roofs shall be so constructed and finished so as to minimise condensation, mould development,
flaking and accumulation of dirt.
3.10 Suitable and sufficient accommodation shall be provided for segregation, storage and disposal of
condemned meat.
3.11 The establishments / Slaughter Houses shall be so constructed and maintained as to permit hygienic
production.
3.12 Windows, doors and other openings suited to screening shall be fly proof. All doors shall have strong
springs so that they may close automatically.
3.13 All operations in connection with the preparation or packing of meat / meat food products shall be carried
out under hygienic conditions. No portion of the establishments / Slaughter Houses premises shall ever be used for
living or sleeping purposes unless it is separated from the factory by a wall.
3.14 There shall be efficient drainage and plumbing systems and all drains and gutters shall be properly and
permanently installed. There shall be provision for the disposal of refuse.
3.15 The drainage system for blood shall either be underground with facility for easy cleaning or a portable
receptacle with lid. All drainages will have traps and screens so as to prevent entry of scavengers like rats, mice,
vermin etc.
3.16 The rooms and compartments where edible products are handled shall be separate and distinct from the
rooms and compartments for inedible products.
3.17 Suitable and separate space shall be provided for the storage of hides and skins. This room shall have a
separate exit.
3.18 A constant and sufficient supply of clean potable cold water with pressure hose pipes and supply of hot
water should be made available in the slaughter hall during working hours.
3.19 Suitable and sufficient facilities shall be provided for persons working in the slaughter house for changing
their clothes and cleaning their footwear, and cleaning their hands before entering rooms used for the preparation
and storage of meat.
3.20 Provision for latrines, toilets and change rooms will be made . Sufficient number of latrines, urinals,
washbasins and bathrooms for each sex shall be provided.
3.21 Suitable and sufficient facilities shall be provided in convenient places within the slaughter house for the
sterilisation of knives and sharpner (mushtala) and other equipment used in the slaughter house. The knives and
sharpner (mushtala) shall be of stainless steel only.
3.22 Whenever cooking is done on open fire, chimneys shall be provided for removal of smoke and soot.
3.23 Whenever the dressed meat is not used up for the preparation of meat food products and some portion
has to be stored without further immediate processing, such storage shall be in a room maintained at 0° C to 2°C.
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 99
3.24 All slaughter house refuse and waste materials will be suitably processed to prepare animal bye products
or dumped in pits that are suitably covered so as to prevent its access to scavengers. For large slaughter houses, a
suitable provision of Effuent Treatment Plant will be made.
3.25 In case of small slaughter houses, waste material should be composted which can be used for manure
purpose and in case of large slaughter houses, waste material should be rendered (cooked) in a rendering plant to
produce meat, bone meal and inedible fats.
3.26 Suitable and sufficient facilities shall be provided for the isolation of meat requiring further examination
by the authorised veterinary officer in a suitable laboratory (within the premises of the slaughter house).
3.27 Consistent with the size of the factory and volume and variety of meat food products manufactured, a
laboratory shall be provided, equipped and staffed with qualified (chemist/analyst and Veterinary Microbiologist)
and trained personnel. The licensing authority shall accord approval of the laboratory after inspection.
3.28 The Chemist/analyst shall have passed graduation with Chemistry as one subject and the. Veterinary
Microbiologist shall be a qualified veterinarian with two years of experience in Meat analysis or having degree of
Master in Veterinary Public Health with specialization in Meat Hygiene.
3.29. Adequate natural or artificial lighting should be provided throughout the abattoir/ meat processing unit.
Where appropriate, the lighting should not alter colours and the intensity should not be less than 540 Lux (50 foot
candles) at all inspection points, 220 Lux (20 foot candles) in work rooms and 110 Lux (10 foot candles) in other areas.
Light bulbs and fixtures suspended over meat in any stage of production should be of safety type and protected to
prevent contamination of meat in case of breakage. As far as possible meat inspection shall be carried out in day
light. Every abattoir shall be provided with well distributed artificial light.
4. Sanitary Practices:
4.01 Every part of the internal surface above the floor or pavement of such slaughter house shall be washed
thoroughly with hot lime wash within the first 10 days of March, June, September and December. Every part of the
floor or pavement of the slaughter house and every part of the internal surface of every wall on which any blood or
liquid refuse or filth may have been spilt or splashed or with which any offensive or noxious matter have been
brought into contact during the process of slaughtering, dressing and cutting, shall be thoroughly cleaned, washed
with water, wiped/dried and disinfectant within three hours after the completion of slaughter.
4.02 Rooms and compartments in which animals are slaughtered or any product is processed or prepared shall
be kept sufficiently free from steam, vapours and moisture and obnoxious odours so as to ensure clean and hygienic
operations. This will also apply to overhead structures in those rooms and compartments.
4.03 All parts of the establishments / Slaughter Houses shall always be kept clean, adequately lighted and
ventilated and shall be regularly cleaned, and disinfected. The floorings shall be impervious and washed daily. Lime
washing, colour washing or painting as the case may be, shall be done at least once in every twelve months.
4.04 All yards, outhouses, stores and all approaches to the establishments / Slaughter Houses shall always be
kept clean and in a sanitary condition.
4.05 Suitable and sufficient receptacles furnished with closely fitted covers shall be provided for collection
and removal of all garbage, filth and refuse from the slaughter house at a convenient time to a place away from the
factory for disposal.
4.06 All blood , manure, garbage, filth or other refuse from any animal slaughtered and the hide, fat, viscera and
offal there from, shall be removed from the slaughter house within 8 hours after the completion of the slaughtering
and in such a manner and by such means as will not cause nuisance at the premises or elsewhere. Every such vessel
or receptacle shall be thoroughly cleaned and disinfected immediately after use and shall be kept thoroughly clean
when not in actual use.
4.07 The inner side of the skin shall not be rubbed or caused to be rubbed upon the ground within any portion
of the slaughter hall. Hides and skins shall not be dragged within the slaughter hall. No gut-scraping, tripe cleaning,
manufacture or preparation of meat food products, household washing of clothes or work of any nature other than
is involved in the slaughter and dressing of the carcass shall be permitted in any slaughter hall except in the
adjuncts to the slaughter hall intended for these products and purposes.
4.08 The premises shall be cleaned thoroughly with disinfectants, one day in advance of production of meat
food products and the equipments shall be sterilized/sanitized before use. The rooms and compartments in which
100 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
any meat food product is prepared or handled shall be free from dust and from odours emanating from dressing
rooms, toilet rooms, catch basins, hide cellars, casing rooms and livestock pens.
4.09 Every practicable precaution shall be taken to exclude flies, rats, mice and vermin from the establishments
/ Slaughter Houses. The use of poisons for any purpose in rooms or compartments where any unpacked product is
stored or handled is forbidden. The use of approved bait poisons in hide cellars, compartments where inedible
products are stored, outhouses or similar buildings containing canned products is, however, not forbidden.
4.10 It shall be ensured that dogs, cats or birds do not have access to the slaughter hall. Open areas in the
factory shall have covered wire rope netting to prevent carrion birds from access to the slaughter hall or the factory.
4.11 Water used in the establishments / Slaughter Houses shall be potable and suitable arrangements shall be
made for ensuring potability of water if bore well water is used for production of meat and meat products. If required
by the licensing authority, the water shall be got examined chemically and bacteriologic ally by a recognised
laboratory. The water quality shall comply the standards prescribed by the licensing Authority.
4.12 Warm meat' meant for immediate sale need not be stored in cool conditions. It can be transported in a
hygienic and sanitary condition in clean insulated containers with covers (lids) to the meat shops/selling units with
precautions to ensure that no contamination/cross contamination or deterioration takes place.
5. Equipment & Machinery:
5.1 The equipment and fittings in slaughter hall except for chopping blocks, cutting boards and brooms, shall
be of such material and of such construction as to enable them to be kept clean. The implements shall be of metal or
other cleanable and durable material resistant to corrosion.
5.2 No vessel, container or other equipment, the use of which is likely to cause metallic contamination
injurious to health shall be employed in the preparation, packing or storage of meat food products. (Copper or brass
vessels shall always be heavily lined. No iron or galvanised iron shall come in contact with meat food products).
6. Personnel Hygiene:
6.1 No person suffering from infectious or contagious diseases shall be allowed to work in the factory.
Arrangements shall be made to get the factory staff medically examined at such intervals as the licensing authority
deems fit, to ensure that they are free from infectious, contagious and other diseases. A record of these examinations
signed by a registered medical practitioner shall be maintained for inspection.
6.2 The staff shall be inoculated against the enteric group of diseases and a certificate thereof shall be kept for
inspection.
6.3 In case of an epidemic, all workers should be inoculated or vaccinated.
6.4 The workers working in processing and preparation shall be provided with proper aprons and head wears
which shall be clean. The management shall ensure that all workers are neat, clean and tidy.
(a) Animal Welfare
Animal welfare is a major concern in meat production. It is essential that animals be reared, handled,
transported, and slaughtered using humane practices. A healthy and peaceful animal is an essential requirement
for hygienic slaughter and safety of the meat product.
Careful handling of animals during loading / unloading, transportation and at slaughtering helps in improving
the quality of meat and reduction in losses in the value of the carcass/meat.
1. Pre Slaughter Handling of Animal:
Livestock are transported en masse from the farm to the slaughterhouse, a process called "live export". Depending
on its length and circumstances, this exerts stress and injuries on the animals and some may die en route. Apart from being
inhumane, unnecessary stress in transport may adversely affect the quality of the meat. In particular, the muscles of
stressed animals are low in water and glycogen, and their pH fails to attain acidic values.
Transportation of Animals
Following requirements shall be satisfied for Transportation of Animals from a farm to the slaughter house.
1.0 General Conditions
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 101
1.1 Only healthy animals in good condition shall be transported unless they are meant for emergency slaughter.
These animals should be certified by a qualified veterinary inspector for freedom from infectious diseases and ecto-
parasitic diseases and their fitness to undertake the journey.
1.2 When animals are to be transported from endemic areas of a disease to non-endemic areas, the animals
should be given protective vaccination and kept in quarantine for 30 days, before transportation.
1.3 Female animals in advanced stages of pregnancy shall not be transported.
1.4 When transporting large animals particularly bears/bulls, special arrangements by providing suitable
partitions should be made to protect the animals from infighting. Similar arrangements should also be made to
protect the young ones from being crushed when they are transported.
1.5 To avoid exhaustion, the animals shall be given humane treatment and care during transportation. The
animals shall not be bound or chained during transit and space provided for them shall be large enough to stand or
lie.
1.6 An attendant along with first aid equipment shall accompany the animals in transit.
1.7 Before loading, the animals should not be fed heavily. Only light feed may be allowed. For journeys less
than 12 hours no feed need be carried but for longer journeys sufficient feed shall be carried to last during the
journey. Watering facilities shall be provided at regular intervals.
1.8 Light and heavy animals shall be separated by providing partitions; animals from different pens/sheds
shall not be mixed during transportation. Male stock shall not be transported with female stock (adults).
1.9 All vehicles should be inspected for safety, suitability and cleanliness before loading the animals. The
floor and walls should be undamaged and there should be no nails or sharp projections which may injure the
animals.
1.10 The Vehicles should be thoroughly sprayed with suitable disinfectant before loading the animals.
1.11 A layer of clean sand to cover the floor to a thickness of not less than 6 cm shall be provided. This layer
of sand shall be moistened with water during the summer months. During hot months arrangements shall be made
to sprinkle water on the animals at frequent intervals. In winter, a 2-cm layer of clean sand with another 6-cm layer of
whole-straw shall be provided.
1.12 Animals when driven for loading or unloading shall never be struck with stick. Driving could best be done
by soft-rubber pipe.
1.13 If animals are to be transported in extreme cold or hot climate, it is preferable to transport them in covered
Lorries on road so that they may not die or get exhausted or suffer from acute respiratory disease. Journey under
such adverse climate shall be minimised.
1.14 Each consignment should bear a label showing the following particulars:
a) Number and kind of the animals loaded;
b) Name, address and telephone number, if any, of the consignor;
c) Name address and telephone number, if any, of the consignee;
d) Instructions regarding feeding and watering.
2.0 Loading
2.1 Loading during extremes of temperatures shall be avoided.
2.2 Suitable ramp shall be provided for loading and unloading the animals. The floor of the ramp shall have cleats at
intervals, so that animals do not slip as they climb or descend. The ramp shall be covered with straw to avoid slipping. At
any time of loading and unloading the vehicle shall be kept clean to avoid slipping of animals. Bale
2.3 In case of railway wagons when loading is done on the platform, the door of the wagon may be used as ramp. In
such cases, bales or bags of hay, agricultural wastes etc. may be placed on the either side of the dropped door to prevent
the animals from getting their legs between the sides of the wagons and platform.
3.0 Space Requirements
3.1 Overcrowding shall be avoided. Each animal shall have enough space to lie down.
102 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
3.2 Railway wagons shall not accommodate more animals than those specified in IS specifications.
3.3 The speed of truck transporting animals shall not exceed 40 kilometres per hour, avoiding jerks and jolts. The
truck shall not load any other merchandise and shall avoid unnecessary stops on the road.
3.4 For journeys, exceeding 12 hours, the animals shall be transported by railway. Loading shall be done by evening.
4.0 Slaughter:
Animals are slaughtered by being first stunned and then exsanguinated (bled out). Stunning can be effected
through asphyxiating the animals with carbon dioxide, shooting them with a gun or a captive bolt pistol, or shocking them
with electric current.
4.1. Stunning:
Stunning before slaughter should be mandatory. By inducing unconsciousness and insensibility, stunning
can avoid and minimise reactions of fear and anxiety as well as pain, suffering and distress among the animals
concerned. Stunning methods induce temporary loss of consciousness and rely on prompt and accurate sticking
procedures to cause death.
It is important that the equipment utilized for stunning and slaughter is maintained in good working condition
and that all operators involved are well trained and have a positive attitude towards the welfare of animals.
Electrical stunning consists of passing electricity through the brain to produce instantaneous insensibility.
The following method of slaughter shall be considered humane:—
(i) Mechanical stunning of cattle may be carried out by one of three methods; captive bolt stunning,
mushroom head percussive stunning and pneumatic percussive stunning. For cattle, pneumatic stunning
should be preferred and the optimum position is that the centre of the stunner should contact the animal at a
point of intersection of lines drawn from the medial corners of the eyes and the base of the ears. The best
position for pigs is on the midline just above eye level, with the host directed down the line of the spinal cord.
The optimum position for sheep and goat is behind the poll, aiming towards the angle of the jaw. If an animal
shows signs of regaining consciousness after the initial stun, the animal must be immediately killed by the use
of a captive bolt gun.
(ii) Electrical stunning - Electrical Head Stunners may be preferred for sheep and goat where both
electrodes are placed on the head region. Water bath electrical stunning may be used for poultry birds. A low
and controlled voltage must be maintained so that the stunning will not damage the heart and brain or cause
physical disability and death to the animals. The minimum current level recommended for stunning are
indicated in the table below.
Species Minimum current levels for head-only stunning
Cattle 1.5 Amps
Calves (bovines of less than 6 month of age) 1.0 Amps
Pigs 1.25 Amps
Sheep and goats 1.0 Amps
Lambs 0.7 Amps
Broilers 100 milli Amps
Turkeys 150 milli Amps
(iii) Gas stunning - Stunning of pigs by exposure to carbon dioxide (CO2) may be preferred. The
concentration of CO2 should be 90% by volume but shall not be less than 80% by volume. Ideally pigs should
be exposed for 3 minutes. Sticking should be done immediately after exit from the gas chamber. Over-crowding
of animals should be avoided in the gas chamber.
5. Precautions for animal welfare:
a. General:
(1) The floor of the slaughter area should not cause slipping or falling of animals.
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 103
(2) Vocalization is an indicator of animal discomfort and need to be watched for.
(3) Use of electric pods for moving animal should be discouraged. Movement of animals can be managed by
grouping, use of plastic wrapped sticks etc.
(4) Pen stocking density should be monitored. All animals should have room to lie down simultaneously. The
condition of animals arriving for slaughter should be closely monitored so that injured, diseased animals are not
slaughtered.
(5) High pitch sounds such as whistling and yelling should be avoided to spare distress to animals.
b. The following factors have been identified as critical to animal welfare:
(a) supervision and training of employees.
(b) Designing of animal transport cart and unloading bay.
(c) Proper construction of holding/resting pen, stunning box, maintenance of stunning equipment,
restraining systems, gates and other animal handling equipment.
(d) Avoiding distractions that make animals refuse to move.
(e) Monitoring the condition of animals arriving at the plant.
(f) Proper design of equipment in the slaughter house.
Keeping this in view, the following need to be observed to ensure humane treatment of animals brought for
slaughter:—
Pre-slaughter handling of animal should be carefully done to reduce stress. Resting of the animals is
essential. Only animals which are disease free and in a condition to walk should be brought for
slaughter.
Distractions that impede animal movements such as, reflections, air blowing towards animals and
movement or high pitch noise, need to be avoided. Herding of animals should not be done through
electric prods but with the help of plastic bags or sticks.
A high standard of training is required for employees to ensure that the basic hygiene and safety
practices are followed while handling animals.
Equipment which is used for slaughter such as captive bolt stunner, gates, hooks etc should be kept
in good working condition and cleanliness of floors etc. needs to be ensured. There should be daily
check to ensure the smooth working of equipment and cleanliness of floors.
The condition of the animals arriving at the plant should be monitored. Animals which are injured or
not in a condition to walk should not be slaughtered.
Inspecting personnel should pay particular attention to these points to ensure reasonable standards
of animal welfare.
6. Poultry welfare:
Welfare programme
The conditions under which broilers are housed and the way that they are managed during their growing
phase, transportation and slaughter are set down in several government/industry endorsed Model Codes of Practice
designed to safeguard their welfare.
A model welfare program needs to be developed for pick-up, transport and broiler/chicken processing sectors.
Processing unit shall incorporate elements of this welfare audit in their own quality plans and manuals.
A Model programme shall envisage following:
Poultry Suppliers and processors must have a documented program for poultry welfare envisaging following;
(a) Catching: Poultry intended for slaughter plant should be clean and in good health. Every reasonable
precaution should be taken to minimize injury to poultry. The catcher needs to be trained to this effect.
(b) Transport: For transport of poultry crates shall be in good repair. There shall be no crate/cage
damage that would allow injury to poultry or allow crates to accidentally open. Transport crates should not be
over-filled and enough space should be provided to allow all poultry to lie down.
104 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
(c) Holding: Poultry held in storage sheds should be provided adequate ventilation and climate control
such as fans or curtains.
(d) Stunning: Stunning equipment should be properly maintained to confirm that poultry are insensible
prior to slaughter, and the time between stunning and slaughter should be limited to minimize any likelihood
that poultry may regain consciousness prior to slaughter.
Economic performance and welfare:
High standards of poultry welfare and high levels of flock performance and economic performance are not
incompatible - quite the contrary, they go hand in hand. It simply makes good economic sense as well as being in the
poultry's best interests to ensure that flocks are maintained in an environment, in which they are thermally comfortable,
protected from injury, fed optimally and kept healthy. Therefore, all measures described elsewhere to ensure that
chickens are kept in conditions which optimize their comfort (in terms of temperature, humidity, air flow and air
quality), in which they are provided with water, shelter, and a high quality diet that matches their physiological
needs, and which optimize their health have just as important effect in terms of poultry welfare as they do on the
overall efficiency of the farming operation.
Poultry health and welfare:
When producing chicken meat in a welfare-friendly manner it is also important that the poultry receive prompt
and appropriate medication and treatment to prevent and treat diseases if this should become necessary, and that
they do not suffer any unnecessary pain, distress, fear or physical injury. It is also important that sick or injured
poultry that cannot be adequately or successfully treated are culled quickly and in a humane manner so that they do
not suffer.
Humane slaughter (poultry):
While the chickens are reared specifically for human consumption and they therefore at some stage have to
be slaughtered, they should be slaughtered in a humane manner, and all poultry should be stunned (rendered
insensible to pain) prior to slaughter.
Slaughter equipment at all supply facilities should be properly maintained to confirm that the poultry are
slaughtered quickly.
7. Ante-mortem inspection
(1) All animals shall be rested before slaughter and shall be subjected to ante-mortem examination and inspection
well in advance of the time of slaughter.
(2) No animal which has been received into a slaughter hall for the purpose of being slaughtered shall be removed
from the slaughter hall before being slaughtered except with the written consent of the Qualified Veterinary Doctor. An
animal which, on inspection is found to be not fit for slaughter shall be marked as "suspect" and kept separately. Each
such animal shall be marked as "suspect" only by or under the personal supervision of the Qualified Veterinary Doctor
and the marking shall not be removed or obliterated except by the Qualified Veterinary Doctor himself.
(3) An animal showing signs of any disease at the time of ante-mortem inspection that would cause its carcass being
ultimately condemned on post-mortem shall be marked as "condemned" and rejected.
(4) An animal declared as "suspect" on ante-mortem inspection but which does not plainly show any disease or
condition that would cause its entire carcass to be condemned shall maintain its identity as "suspect" until its carcass and
all organs are finally inspected by the Qualified Veterinary Doctor.
(5) No animal in a febrile condition shall be permitted for slaughter. No suspect animal shall be slaughtered until all
other animals intended for slaughter on the same day have been slaughtered. All animals which, on ante-mortem inspection,
show symptoms of railroad sickness, parturient paresis, rabies, tetanus or any other communicable diseases shall be
marked as "condemned" and disposed of in accordance with the provisions contained in sub paragraph (8) below.
(6) Animals presented for slaughter and found in a dying condition on the premises of a factory due to recent
disease shall be marked as "condemned" and disposed of as provided for "condemned" animals.
(7) Every animal which, upon examination, is found to show symptoms of or is suspected of being diseased or
animals declared as "suspect" shall at once be removed for treatment to such special pen and kept there for observation
for such period as may be considered necessary to ascertain whether the animal is diseased or not.
¹Hkkx III—[k.M 4º Hkkjr dk jkti=k % vlk/kj.k 105
(8) All animals declared as "condemned" on ante-mortem inspection shall be marked as "condemned" and killed if
not already dead. Such carcasses shall not be taken into the factory to be slaughtered or dressed, nor shall they be
conveyed into any department of the factory used for edible products.
Previous and next
Questions people ask
Is regulation 4 of Food Safety and Standard Act 2006 still in force?
No repeal of Food Safety and Standard Act 2006 is recorded.