Rule 169, The Jharkhand Motor Vehicles Rules, 2001: Approval of locally manufactured trailer
The Jharkhand Motor Vehicles Rules, 2001 - Rule 169
Text of rule 169
Approval of locally manufactured trailer
169. Approval of locally manufactured trailer. - (1) No locally manufactured trailer
intended to be used as a transport vehicle within the State shall be registered as
transport vehicles unless the design of such trailer is approved, provided that this rule
shall not apply to trailers manufactured outside India.
(2) No trailer, the design of which is approved shall be altered so that it does not
comply with the approved design.
(3) An application for the approval of a design of a trailer shall be made to the
State Transport Commissioner alongwith the report of verification of design and
recommendations of maximum laden weight and axle weight in respect of the trailer
obtained from the testing institute and a fee of one hundred rupees.
(4) An application for obtaining a report of verification of design and
recommendation of maximum laden weight and axle weight in respect of a trailer shall
be made to the testing institute, in triplicate. Such application shall also be accompanied
by three copies of each of the following documents duly certified by a mechanical
engineer, having minimum qualification of bachelor's degree in mechanical engineering
of a recognized university, namely. - (i) full specifications, (ii) drawings giving all
dimensions and details, and (iii) set of design calculations of (a) axles and their
The Jharkhand Motor Vehicles Rules, 2001 94
supports, (b) springs and their supports, (c) long bearers, (d) cross-bearers, (e)
platform, tank or anything that may be carried on the cross bearers and their supports,
(f) low bar or king pin, (g) turn table or any other scribbling devices for the front axle if
provided, (h) brakes and braking arrangement, (i) any other item such as shock
absorbers, tipping devices etc, if included, (j) wheels and tyres.
(5) The testing institute shall, upon the receipt of such application scrutinize the
design and calculations and if the design is found satisfactory, it shall certify what would
be in its opinion, maximum laden weight and axle weight in respect of the trailer, which
is compatible with reasonable safety.
(6) The testing institute may call upon the applicant to furnish further details, if
required.
(7) In case the design is not found satisfactory, the testing institute may reject the
design.
(8) When design is found satisfactory, the testing institute shall forward one copy
of the approved design, specifications and calculations with its recommendations as to
the maximum laden weight and axle weight, to the State Transport Commissioner and
one copy to the applicant.
(9) The applicant, on approval of the design, shall supply the State Transport
Commissioner with as many extra copies of the approved design, as may be required
by him for sending them to different registering authorities for their record.
(10) The fees which may be charged by the testing institute for such checking of
a design shall be five hundred rupees, for the design of a trailer having maximum laden
weight upto 10 metric tonnes and one hundred rupees extra for additional metric tonne,
or part thereof, subject to a maximum of one thousand rupees, and shall be paid by the
applicant to the testing institute on demand by it, and shall not be refunded once the
design is checked irrespective of whether the design is approved or not.
(11) Notwithstanding anything contained in this rule, the approval of the design of
a trailer manufactured in India by a competent authority in any other State in India shall
be deemed to be an approval accorded under these rules, provided that there is in force
in that other State, rules conforming to or containing substantially the same provisions
as in this rule.
Previous and next
Questions people ask
Is rule 169 of the Jharkhand Motor Vehicles Rules, 2001 still in force?
No repeal of the Jharkhand Motor Vehicles Rules, 2001 is recorded.